Problem: THX Config resetting after each pc rest

Setup: I'm using the console from the original install disc, but the driver is the latest web-download driver, version 02.09.006 from 9th of oct. 2006. I'm using the original consoles because they are much more intuiti've and I can even set more things than whats in the clear web-driver installation. Windows XP Pro my OS by the way with 5. speaker system. Problem: The thx console settings with speaker location and facing is ALWAYS change between pc restarts. On top of that I always see very silly data there, like front left speaker distance 0.meter, the other is .4meter, angle is also totally different, so its just really messy numbers are there. Sometimes I swap over from 5. speakers to headphones when its not appropriate to listen the sound loudly but that shouldnt make the settings totally messed up every time either. So I dont feel that I'm doing something wrong, but the settings are not saved and not "standard" either, just messed up settings most of the time when I start up the thx control center to setup/double check?the speaker locations. What could couse the problem please?

I've got the exact same problem as H0PE. My setup is an X-Fi XtremeGamer-card using the default 6 ch outputs, combined with 5. speakers (obviously). I'm using the latest drivers downloaded from Creative.com. Still the bass/treble controls keep resetting, along with the various speaker settings that H0PE mentioned. I hope there's some kind of solution to this, as it's very annoying.

Similar Messages

Recording audio level in Sound control panel resets after each slide

This has been a HUGE problem for me ever since I went from Windows XP to Windows 7 and Captivate 5.5. Basically, the sound was not recording loudly enough no matter what I did. So, I checked the Sound Control Panel and the Level was down to 12. Of course, I adjusted it to 100. It would stay at 100 for just one recording. As soon as I hit the red recording button a second time, Captivate readjusts it back down to 12.
Now, you might think that this has something to do with my hardware device. Think again. I tried numerous hardware devices -- it did not matter which device I used -- the problem remained the same. You might also think that it is not a Captivate problem, but how do you explain that the problem does not exist when I record audio in any other program -- Lectora, Articulate, Windows Audio recorder? It ONLY occurs with Captivate.
So, I finally got an Adobe Support person on the phone ... somewhere way down in TIMBUCKTOO -- of course! And of course, he could not help me or explain why this is happening and tried to blame it on anything except Captivate. This has added 6-7 keystrokes to every slide I have to record.... and drastically impacted productivity.
Is anybody listening out there? Because I'm pulling my hair out and ready to dump Captivate!

I'm posting specs on my machine. If there are any settings I left out, please let me know where to go to find further information. I'm assuming my audio/sound devices may be of interest here:

Default printer resets at each reboot after installing Acrobat X Pro

I installed Acrobat X Pro yesterday, and updated it after the install to version 10.1.4. Since that time my default printer has been reset after each computer reboot to the first physical printer on my printers list - an HP 5900 series. I want my default printer to be my HP 6940, which is local, connected by USB, and have gone into Start/Printers and Faxes on my Windows XP Professional machine to do this. But each time I reboot, the default is switched back to the HP 5900. The printers have been installed on my machine for years with no issues, and I had Acrobat 9 Professional on my machine until yesterday - with no issues. I tried live chat for help, but the representative told my it was a physical printer issue and I needed to contact HP. Can you help me stop my computer from resetting the default printer each time it is shut down?
The order of printers listed on my machine:
Adobe PDF
HP 5900 Series
HP 6940
(several network printers listed below here)
Thanks!
Bryan

Hi William ,
Please perform the following steps .
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check
Regards
Sukrit Dhingra

Reset of automatic scheculed Forecast Backround after each Run

Hi Experts
We have scenario where forecasting jobs are scheduled for Monthly Run through (MC8G) .Theses jobs are not reseting itsself for next month Run ,Untill Job is reset from status B to Null via MC8E.
Kindly guide me why manual intervention is requiring each time.
Thanks in advance
Regards
Upinder

Hi Mario
Thanks for your update ,we have also checked SDN thread dated 9th Aug 2011 and got below link :
http://help.sap.com/bestpractices/BBLibrary/documentation/M06_BPP_22_EN_NO.doc
Which states that :When a job has been scheduled and run, the job gets a status. This status needs to be reset before the job can run again
Pls reaffirm our understanding that job status needs manual resetting after each auto run of Creating production plan and mass transfer to demand management (Background job).
Thanks in advance
Upinder

Keyboard system preferences resetting after restart

Greetings,
I began with 2 similar problems. My menu bar and keyboard system preferences would reset after each startup. I fixed the former with https://discussions.apple.com/thread/6028346?tstart=0
Still, every time I restart or logout my keyboard system preferences reset to the default. These defaults interfere with the software I run- Logic & Pro Tools, so while not the worst thing to have to remember to reset them each time, it is a drag.
Any help will be appreciated
Thanks

The procedure below will reset the permissions of a user's home folder in OS X 10.7.4 or later, including 10.8 or later. If you're running an earlier version of 10.7, update to the latest version first. This procedure should not be used under OS X versions older than 10.7.4.
Back up all data before you begin.
Step 1
Click the Finder icon in the Dock. A Finder window will open.
Step 2
Press the following key combinations, in the order given:
Command-3
Shift-command-H
Command-I (the letter "I" as in "Info.")
The Info window of your home folder will open.
Step 3
Click the lock icon in the lower right corner and authenticate with the name and login password of an administrator on the system. If you have only one user account, you are the administrator.
Step 4
In the Sharing & Permissions section of the window, verify that you have "Read & Write" privileges. If not, use the "+" and "-" buttons in the lower left corner to make the necessary changes.
Step 5
By default, the groups "staff" and "everyone" have "Read Only" privileges. With those settings, the files at the top level of your home folder will be readable by other local users. You can change the privileges to "No Access" if you wish, but then your Public and Drop Box folders will be inaccessible to others. Most likely, you don't need to change these settings.
Step 6
If there are entries in the Sharing & Permissions list for users or groups other than "me," "staff," and "everyone," delete them.
Step 7
Click the gear icon at the bottom of the Info window and select Apply to enclosed items... from the drop-down menu. Confirm. The operation may take several minutes to complete. When it does, close the Info window.

Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

Fixed it. It is on Chevrolet's end. Press config to access the configuration settings. Turn menu/tune knob to highlight vehicle settings. Press menu/tune to select the vehicle settings menu. Choose return to factory settings.

My Trackpad speed and Highlight Color keep reseting to their defaults after EACH restart.

My Trackpad speed and Highlight Color keep reseting to their defaults after EACH restart. I'm running OS 10.8.2. I had other problems with a previous admin account, so I created a new one, in which I'm having this problem, and deleted the old user acnt.
Please HELP!

Keyboard and mouse preferences are stored in the following two plists:
com.apple.systempreferences.plist
com.apple.universalaccess.plist
EE

[XFCE]Keyboard layout config sometimes gets reset after suspend/resume

After I got suspend/resume working thanks to the help here, I have still another little problem with it: After suspend/resume the keyboard layout configuration in the corresponding xfce-panel plugin is sometimes reset to US. The keyboard layout should be Russian/German with switching the layouts with LCtrl+LShift. In the xorg.conf everything is fine, but it seems to be disregarded:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de,ru"
Option "XkbVariant" ",winkeys"
Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection
The settings that I make in the panel-applet via its configuration dialogue work though, but they sometimes get reset after a suspend/resume.
The XFCE session is started via following command in ~/.xinitrc:
exec ck-launch-session dbus-launch xfce4-session
Thanks for any hint,
PhotonX

I see. Then you should maybe add debug output to check whether the script is run at all and if yes, where it fails. Like
button/lid)
echo "lid action caught" >> /home/lid.log
case "$3" in
close)
logger 'LID closed'
# Suspend and lock the screen
/usr/sbin/pm-suspend &
DISPLAY=:0.0 su -c - miki /usr/bin/slimlock
echo "lid closed" >> /home/lid.log
open)
logger 'LID opened'
# Set the keyboard layout again on IT
setxkbmap it
echo "lid opened" >> /home/lid.log
logger "ACPI action undefined: $3"
echo "something wrong happened" >> /home/lid.log
esac
and then check /home/lid.log after lid close&open.

My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

To make sure that this is not software related, set it up as new device, explained in this article:
How to erase your iOS device and then set it up as a new device or restore it from backups

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

[SOLVED] config in /etc/systemd (ssh, getty) resets after system upgr.

I've made changes in /etc/systemd/system/getty.target.wants/[email protected] (don't clear console at boot as per https://wiki.archlinux.org/index.php/Sy … r_boot.3F) and /etc/systemd/system/sockets.target.wants/sshd.socket (changed ssh port) but they keep getting reset after a system upgrade (not sure by what package, pacman -Qo file says that no package owns them)
I'm starting to wonder if above places are the correct place and even way to do mentioned changes.
What I want to achieve;
1) simple way to not clear console after boot
2) change what port ssh (systemd ssh socket) listens at
3) make them changes permanent and durable even after a system upgrade
My setup is pure systemd.
Last edited by ImbaLocus (2012-10-30 23:41:08)

Thank you, this works.
Have yet to do an upgrade but I'm sure configuring according to your solution will This works perfectly.
Last edited by ImbaLocus (2012-11-01 12:48:33)

When opening new tab, how to make me able to type in the adress bar directly without clicking on it? -- (about:config reset and add-on doesn't work)

Hi all,
Need a help relating New Tab on Mozilla.
I want to be able to directly type in the address bar everytime I open a new tab in Mozilla, without clicking anything. To be clearer, it means that everytime I open the new tab, the blinking cursor is already on the address bar.
What's happening right now is everytime I open new tab, the cursor is not placed anywhere--not on the search bar on the page, not on the address bar. I should put the cursor somewhere to do something.
I tried using the about:config reset (1) and installing custom new tab (2), but both do not work.
When I tried the about:config reset the Reset button is not highlighted (I assume it means it's default already), and the Custom New Tab doesn't yield in different result.
What confuse me is 2 days ago my Mozilla works just fine. Everytime I opened a new tab, the blinking cursor was on the address bar and I was able to type directly.
Thank you and appreciate the help!!
Note:
(1) about:config reset:
- Type about:config into the address bar and press Enter.
- To bypass the warning, press the big button labeled "I'll be careful, I promise!".
- In the search box, paste browser.newtab.url
- In the search results, right-click browser.newtab.url and choose Reset.
(2) Custom Add On reset:
- Install Custom New Tab. = https://addons.mozilla.org/firefox/addon/custom-new-tab/
- Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
- Next to Custom New Tab, click the Options button.
- Set whatever page you want to open in each new tab (about:newtab is the default; about:home is the default home page), and make sure "Place focus in URL bar" is not checked.

''philipp [[#answer-669209|said]]''
<blockquote>
ok, as a follow up i'd recommend disabling half of the addons & restarting the browser - if the problem continues disable the other half & continue until you've narrowed it down to the culprit...
</blockquote>
Hi Philipp,
I read the link you copied on the first post and also tried your recommendation above. None seem to work. Even if I disable all add-ons, the problem still persists.
One other info, this problem seem to appear after I installed several program yesterday. These programs apparently installed other programs that set my homepage and main search engine to a particular website. But I installed all of these programs already. Would that be a cause of the problem?
Thanks.

Serious iPod problem (iPod keeps resetting)

I've had my iPod for almost 2 years and until now everything worked fine. i listen to it on average 1 hr each day, and until 2 days ago battery seemed fine (I would recharge it each week, though it would be only half empty).
So 2 days ago I was listening to music, tried to go forward and all of a sudden it stopped playing music, it was just frozen. I reset it and it came back with a "sad" iPod icon. Ocassionaly it would end up with the icon as if the battery is dead. I reset it a few more times and mostlt I got the same "sad" icon and only a few times the battery icon.
I than tried to hook it up to my computer via USB and it would just reset and PC/iTunes would not see it.
Since I've had it for 2 years I thought maybe the battery has gone bad (but does it happen just like that without any signs?) so I tried to charge itbut when I connect it to charger it keeps resetting.
I than tried to force it into disc mode and that worked but as soon as I connected it to my computer it would reset. Even when I tried to charge it in disc mode it would reset after a few secunds.
So, if left alone it is in off mode, but if I push any button it starts up, and eventually shows the sad iPod icon. If plugged into the charger or PC it keeps resetting.
I have no way to get into it and update the iTunes, or access iPod. Has anyone seen this? Does is sound like a battery or is it something worse? I am out of warranty and would not want to spend too much money fixing it since it probably does not worth much, though i wish I could save my iTunes collection...

Hey guys, I'm having a similar problem though a slight variation on a theme. maybe you can help me out.
I have a 4th generation iPod (20 Gig) and it told me my ipod battery had died, so i plugged it into my computer to charge. It started out showing me the large symbol of the battery with the lightening bolt until there was enough to power the iPod so that it could run with iTunes. Except once it finally had enough power and interacted with iTunes it went into a black and white mode instead of the normal color mode and the the battery icon up in the top right corner was black with the lightening bolt. I got the normal "do not disconnect" message except that was black and grey as well.
I figured i'd update my ipod as it was still charging and added a new playlist and it appeared to take the music, but when I unplugged the ipod it showed me the icon of the folder with the exclamation point and gave me the address http://www.apple.com/support/ipod. Since i didn't have time then i reset it and then plugged it in via a car charger to see if charging it would fix the problem. Unfortunately, when I unplugged it from the computer to take to the car and reset it, it started rebooting over and over. I was able to force it into disc mode so that it would continue to charge without wasting so much battery rebooting (it didn't reboot in disc mode) and continued to work on it when i got home.
At home i tried every fix they have listed on the site and in my ipod handbook and nothing has worked. I have reset, restored twice, and charged the battery. The weird thing is that it
1) is recognized by itunes
2) just turns off if i try to use the charger
3) appears to be able to download music to it but makes a clicking noise
4) since it doesn't recognize the charger I can't finish the restore process
5) still gives me the folder icon when it tries to turn on
PLEASE HELP IF YOU CAN!
If you can think of anything i can do to fix this I will be so appreciative.
Thanks guys!

Pivot Table, "Insert Page Break After Each Item" Setting Only Works for the First Item Change

I have a flattened pivot table generated from Powerpivot and I would like to insert a page break for each change in the row item.
When I use the pivot table Field Settings>Insert Page Break After Each Item, Excel inserts the first page break then returns to normal pagination for the rest of the output.
Is there another setting required to maintain the page breaks after the item change?
Thanks.

We are experiencing the same problem. Did you ever find a solution?

Do I need to power off my iPad after each use?

I bought a new iPad. The problem is after each use I have to power off in Order to connect to internet. Is there something in settings I need to do in Order not to have to shut my iPAd off so often

That shouldn't happen. I almost never turn my iPad off unless I do so for troubleshooting purposes. There is nothing in the settings that you should have to "fix" either as long as WiFi is always turned on.
Try resetting your iPad and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Problem: THX Config resetting after each pc rest

Similar Messages

Maybe you are looking for