Problem timing slides to audio in Blu-ray slideshow in encore cs5. Help!

I'm using a 2006 mac pro 1,1 with 7GB, and I'm trying to make a blu-ray slideshow with encore cs5. There is about 20 minutes of music for 99 slides. I click "fit slideshow to audio" and the time per slide increases to about 12 seconds, which is correct, and when I preview the slideshow it
plays back correctly. But when the blu-ray or image is burned, the slides last only about a second or two each and the audio cuts off abruptly at the end of the 99th slide. This project, by the way, has two slideshows which play one after the other. Both have the same problem.
Operating System: Mac OS X (v10.6.4)
Video display card / driver version: Quadro FX4500
I examined the blu-ray file streams created by encore cs5 with VLC. The slide transitions (cross dissolve) were about 2 megabytes each and played correctly, but the slides themselves seem too short at around 300kb and don't play back at all. Video Blu-rays work fine; the problem only shows up on blu-ray slideshows. When that same slideshow is burned as a dvd, by the way, it also works fine. What's going on?

I have just the same problem with Encore CS5 running on Windows 7 64 bit:
When i create a slide show with music,the length of music defines the
length of the slide show every thing works fine when i play the e show with preview
function in Encore. When i burn it on a blu ray disk it works fine
(in sync) playing the BD disk on the PC, but when i play the BD
when i play the BD disk on a BD player (Sony BDP-S300 or BDP-S470) the music
stops many seconds before the slide show is finished.
Burning the slide show with Encore on a DVD everything works correct.

Similar Messages

PrCS5.5: what are the setting to produce a Blu-Ray disk with Encore CS5

what are the setting for a sequence, media encoder, & Encore to produce a Blue-Ray disk.
At present , I have tried several different combinations, but Encore just hinges

sorry i forgot the link...
http://www.precomposed.com/tutorials/04_bluray_subtitles/
at the end of tutorial , you find instructions for create a right iso image.
Another thing. If you go to create a DVD Dual layer, Imgburn offers a excelent tool to set layer break. I prefer this option,and not Encore automatic option.
You can check other tutorial
How to write a Blu-ray Video disc using ImgBurn
http://forum.imgburn.com/index.php?s=a3f19e39fa1a21b69df15414dc8b7a90&showtopic=9512

Encore CS5 and 5.1 audio to Blu Ray not working

I have a premiere project that, with the exception of a welcome title card, is one video track of *.m2v and one audio track of AC3 5.1. The master volume track is 5.1 as is the audio 1 track. When I use dynamic link to sent this to encore, it always produces a blu-ray that is dolby stereo and not dolby 5.1
Any ideas?

I was going to give up but then I succeeded in creating a 5.1 audio mix on the blu ray by:
1 Not using Premiere at all
2. Creating a new blu ray project in Encore
3. Importing the AC3 audio file as an asset first
4. Right clicking on the AC3 and using it to create the timeline
5. Importing the quicktime video only file as an asset and adding that to the timeline
6. Building the blu-ray
7. I imported the/stream file on the Blu-ray itself into Premiere so that I could see the wave forms and it was a 5.1 track.
Works.

Is it possible to burn a slide show onto a Blu-ray DVD ?

Using PS8 Premier I could't burn my slide show ( no movies ) with music onto a Blu-ray DVD. The problem seems to be......low memory. ( my computer has 2 Gig but my project which doesn't seem that involved has over 4 or 5 Gig ). The reason I want to burn onto Blu-ray is to get a clearer project than I was able to on a regular DVD. I get a good slide show on my cpu monitor and also on a regular DVD in the smaller screen of the burner program but the project loses resolution when going to full screen. That is why I wanna try it on Blu-ray.

If you are going to BD, then I would start with a BD Preset. This ARTICLE will tell you the supported Frame Sizes, and FPS.
I would choose the 1920 x 1080 @ 29.97 FPS Interlaced (NTSC), or 25 FPS Interlaced (PAL). I would then go to my original stills and Scale them to ~ 1920 x 1080 in PS/PSE. This ARTICLE will give you tips on doing that with automation in either image editing program. Import those Scaled Images into PrE, with the Duration that you feel is correct, depending on the "flow" of the SlideShow. Note: you can tweak that Duration for each Image, if needed, but by planning a bit, most will not need any tweaking. Then, add any Pans, or Zooms (Effect>Motion>Scale, and/or Motion>Position). Add any Transitions desired, and edit any Audio. Add the desired BD Menus and Chapter Markers (no Stop Marker at the end of the Timeline). This Project should burn to BD easily.
Good luck, and hope that it helps,
Hunt
Note: in the first linked article, you will see that 20 FPS is not supported, and neither is 1 FPS. You can, of course, make the Duration of each Image 1 Frame, but will probably want the Image on-screen for longer, say 5 - 10 secs.

Compressed audio to Blu-ray quality sounds muffled

Hello!
I am having difficulties keeping the audio quality of a HQ video, edited in Final Cut Pro, after compressing it with Compressor 4 to Blu-ray quality.
In Compressor 4 I used Dolby Digital Professional option for audio (ac-3) but after compressing, the audio sounds smothered/muffled in comparison to the original.
Does anyone have a solution to this problem?
I have tried many things, including making the sound level higher in FCP before sending in to Compressor and changing the audio settings in Compressor quite some times.
Please help!

Try this: In the Inspector>Encoder pane>Audio, set Dialogue Normalization to -31 and in the Preprocessing pane, choose None for Compression Preset. Otherwise, experiment with different Compression Presets.
Good luck.
Russ

Out of sync audio for Blu-Ray

Okay first
Win 7 i7, 12 gigs of Ram, the right video cards....
I have 2 sequences the first is an awards show 2:24 mins all edited with lower thirds and credits. Native 1920 x 1080 29.97 .MOV. This I output from Premiere using H264 BluRay and down scaled to 720. It work fine in ENCORE CS6.
The 2nd sequence is red carpet and green room interviews 1920x1080 29.97 .MOV files all edited with titles and lower thirds. When I output this the same as the 1st sequence, H264 BluRay and down scaled to 720 and then import the files as a time line into ENCORE CS6 the audio is out of sync. In fact it is about 1 sec faster than the video it starts off in sync and drifts.
If I output this sequence at 1920x 1080 no down scaling to 720 then it is in sync but the whole project is then too large to fit on a single layer Blu-ray disc this is why I have down scaled 720.
I have re-output it 6 different ways and the only way I get sync is at 1080. It makes no sense to me because the 1st sequence down scaled with no sync problems at all.
I even dropped the edited sequence into a new 720 sequence and scaled to frame size then output that and still the audio is out of sync.
Let me say so there is no misunderstanding the audio is in sync on the premiere time line the problem only occurs when output to ether H264 Blu-ray or MPEG2 Blu-ray if I down scale to 720. If output to 1080 no sync problems.
I don't know what to try now but go to a dual layer disc and I really hate to do that and waste 20 gigs of space.
Any ideas?
Thanks
Dennis

If I output this sequence at 1920x 1080 no down scaling to 720 then it is in sync but the whole project is then too large to fit on a single layer Blu-ray disc this is why I have down scaled 720.
The only two factors which affect file size are bitrate and duration, specs like resolution and frame rate have no bearing.
Try using 1080 with a lower bitrate.

Blu Ray Burned in Encore CS4 play audio but no video

I've burned this project multiple times and everytime I get the menus and the audio, but no video when played on a Blu Ray player. The same disc plays fine in computer/laptop. And when I tried a shorter version of the project (10 minutes vs. an hour and a half for the original) it plays fine everywhere. Could the file size be causing my disc not to play in a BD-R player? Then why would it play on a computer/laptop?

More information needed for someone to help
http://forums.adobe.com/thread/416679
Some specific information that is needed...
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
Odd Errors http://forums.adobe.com/thread/670174?tstart=0
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
As well as the below, right click the Encore icon and select Run as Administrator... which is NOT the same thing as running the computer with the Administrator account... and which fixes several "odd" problems
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

No Audio in Blu Ray DVD

After editing in 1080p and exporting with Adobe Media Encoder using H.264 Blu-ray and Dolby audio, my DVD had no audio!
Here are some settings:
Export Audio
Dolby Digital (I used all the following default presets)
Audio Coding Mode: 2/0 (L,R-Stereo)
48kHz
192
Complete Main
Dynamic Compression Preset: Film Standard
Copyright Exists-checked
Original-checked

sneedbreedley wrote:
The problem was my Blackmagic settings. I'd delete this post but I cannot.
There's a reason you can't delete it. It's because next Tuesday a user from Flint, MI will come to the forums trying to figure out why there's no audio on his DVD. He will find your post, and realize his Blackmagic settings are wonky. There will be much rejoicing.
-Jeff

Questions on a Audio Only Blu Ray w/slideshow

I'm a professional mastering engineer our company is going to release it's first Surround project on Blu Ray it's going to be a Classical music piece. Need some direction on a few things in Encore CS6.
The audio files are going to be processed through DTS-HD MA at 5.0 24/96 resolution/lossless, I have toyed with Encore on the authoring end but I'd rather find a good layout to follow so it can be as easy as possible, below are some of the questions I have if anybody can point me in the right direction i would be grateful.
I have 19 tracks in the project and also a slideshow that has to follow the chapter/track stops so they coincide with the music so let's say track 1 has three photos then track 2 might have what would be the best way to do this, a slideshow and run the music in duration with the slideshow ? or put the photos in a timeline and adjust them to the tracks there?
What would be the best way to import the audio would it be one big file (it's a little over an hour long) or split the file into tracks which would make 19 files for each track. (using the DTS suite this is relatively easy)
Does Encore need a video to process the blue ray properly or what i intend to do inside the spec of blu ray?
How do you end the timeline is there an end marker like you have in audio when you end the album or is there a different way?
I have a ton more questions but these are the most important. If anybody has a better method or has done something like this before please respond.

Encore has too many issues with slideshows: create the slideshow (i.e. it will have no manual advance options) separately, and time it there.
That also makes your question about a no video bluray moot.
A timeline has an end action, so not a marker as such. You just set the end action.
If Neil Wilkes does not respond to the audio issues here, search this forum for his posts.

Problems burning Blu-Ray DVD with Encore CS6 Creative Cloud version

I recently installed Premiere Pro CS6 from Creative Cloud on a high performance PC. Everything works fine but Encore Blu-Ray burn will not finallize... get error message after most of disc is burned. Have tried several burns without success. Same files burn okay with Cyberlink software. Seems to be a bug with CS6 Encore files.
Have tried with Cyberlink removed from machine.... same problem.
Any suggestions??

The error is: Blu-ray Error, "device error", Code "3", Note, "AS-StorageError = 97071
I imported one HD Blu-Ray MPG file encoded in Premiere Pro for Blu-Ray DVD about 4GB in size. It was set-up with simple "Play menu". It burns up to the point of finalization, then the above error message occurs.
I insstalled a second Blu-Ray burner (different brand) and attempted another burn but with same error message. Also tried different brand of discs.
I have a second computer that I had previously loaded the trial version of Permiere Pro CS6, then later opted to do complete install via Creative Cloud. CS6 Encore will burn a Blu-Ray disc on this system with the same file without any problem or error messages.
It seems to be a problem with the Creative Cloud installation on the first computer???

No Dialog (audio) from Blue Ray Player

I am running a Sharp BD-HP21U blue ray directly into a Mitsubishi LT-52149 HDTV with an HDMI cable. On all blue ray discs and some DVDs I only hear the background music/sound effects but no dialog. On some DVDs I get dialog. Same result with a different HDMI cable. I have tried different sound settings on the blue ray and TV but haven't found the right combination. My DirecTV (through an HDMI cable works fine).

I wonder if your player is set to 5.1...
Your TV is stereo, nothing more, so you won't get any sort of surround sound from it, and the TV or the player might be confused.
That's about as much as I can guess... one of the TV guru's should be along.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Blu ray slideshow problems

Hoi
Created my first blu-ray with cs3 movie was great encoding speed was even greater but when i tried to create just a slideshow with 90 photos
The progam refused this
also updated encore with latest service pack
has anyone else got this problem

where did it stop?

Menu Blue Ray maked in encore with crashes

Hello, I have a problem and no solution can somehow, I wonder if you guys can help me.
I did a project on Blue Ray in Encore, when I see in this preview is perfect, I burn an iso orrecord it on Blue Ray and when I watch it crashes a few seconds including the musicexactly the time the buttons will appear, the menu is animated and buttons appear in 32seconds of animation. I'm using the CS5 version and I can not a solution to this problem.Please help me
thank you
Priscilla

in computer and Blue Ray player... crashes in 32 seconds for 3 seconds and continue normal.... I dont know what is this. the same project in dvd is normal.

Low Rez Menus on my Blu Ray Disc... Help Please?

Hello everyone. I just created my first blu ray DVD and the everything is great and works as it should but the resolution of the menus are horrible. My project is full HD at 1920 x 1080. The menu background and buttons are actually blurry! I use Windows 7 by the way. Any ideas on what I did wrong? Are there special HD menus that I should have selected from?
Thanks for any help.
Bob

OK.. guess what? I picked an HD menu this time confident that I just messed up the first go around and I burn my blu ray disc, second one now, and my menus are a little bit better but are still BAD! I then did a bit of research on the web and learn that I'm not the only one with this problem and apparently this has been a problem with PE7,8,9 and now 10! Have a look at this thread: http://www.elementsvillage.com/forums/showthread.php?t=71706
My video is excellent but my menus are blurry.
Wow.... not good. Can anyone point me to a work around or a fix to this problem? Again, I'm using Windows 7 64 bit. The menu that I used was the Pan and Zoom under Slideshows, I changed the background image to a 1920 x 1080 image, I added music, and I changed the color, siz and location of some of the text.
I guess my next test is to use a stock HD menu with no changes and see if I get an HD menu but every time a run a "Test" I use up a blank blu ray disc. This could get expensive.
Again, any help would be appreciated.
Bob

Transacoding Blue Ray project in Encore CS4 gives error!

I am transcading a high def (AVCHD) project fo a Blue Ray image on my hard disk.
The transcaoding runs for about 6 hours and when done it gives me the following error:
Blue-ray Error:"device not ready", Code:"3", Note: "File can not open.(G:\MyDojo\cruise to alaska-2010\AuthorScriptHDMVSessions\-sessionFile_Asf-session_1_video.m2v.ves) -
The path is a valid path and the file exists.
Every time I try to rebuild, not having exited Encore, results in same error within seconds. Exiting Encore and re-building, starts the whole loooong process over.
Any ideas? Please help.
NOTE: I used this method once before and it worked just fine.
Running CS4 on a Vista Ultimate w/8GB Ram, plenty of disk, DELL XPS720.

Some reading, and fixes if you have not updated
Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116
http://forums.adobe.com/community/encore/encore_faq

Problem timing slides to audio in Blu-ray slideshow in encore cs5. Help!

Similar Messages

Maybe you are looking for