Problem to accept call.........

Frnds I have a problem with my 5800 xpressmusic plz suggest me to solve the prob......
I can't accept any call, can't stop alarm, can't stop reminder, can't stop to do note, can't unlock phone by tapping the unlock button when keypad is lock in version 40.0........
Solved!
Go to Solution.

It's like Krizanand said. Take a look here and you can learn your friend how to do it: http://www.youtube.com/watch?v=0bca1ebhGB8

Similar Messages

Windows 8 - problems for accepting calls/emitting ...

Hi everybody,
First, I'm not a native English speaker, so sorry if I do some mistakes...
I have a big problem on my Skype. I tried many times to solve it, but without succes. The problem is, whenever I want to call someone, or to answer to a call... it does not work ! I have to call again and again again... till it works. Sometimes it works at the first call, but sometimes I have to call like 15 times in a row. Whenever it's not working, I can't hang up or do anything. All the buttons aren't working....
I have the latest version. I uninstalled it and reinstalled it a lot of times.
Thank you

I'm still waiting for an answer !

Problems with accept () system call in Solaris 10

We are doing some prototyping in Solaris 10/Zones using TCP sockets and have encountered the problem the "accept" system call in Solaris 10 always seem to return immediately without waiting for clients to connect to it. The same program works fine under Solaris 9 without any problems.
So in the following call:
ssock = accept( sockfd, (struct sockaddr*)bind_address, &alen );
if( ssock < 0 )
printf( "Accept failed: ...\n" );
the program always prints "accept failed: " continuously. Is this a known issue?

The problem only occurs when we use INADDR_ANY to bind a socket. The program works as expected when we use real as well as virtual IP address configured for an interface on any Solaris Zone. When we use INADDR_ANY, error number is 14 (EFAULT, Bad Address).
Just wondering if we need to make any configuration changes in order to allow INADDR_ANY to work.

HT1414 i restored my iphone now i cant accept calls or call out whats the problem?

i restored my iphone now i cant accept calls or call out whats the problem?

Hey retrothakid,
Thanks for the question. I understand that you are experiencing issues with your iPhone 4s. The following resource may provide a solution:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Thanks,
Matt M.

Accept call problem?

plz kindly reply, when i press accept receiving call its goes to yellow reject option? and my call reject i dont know every thing works fine, thanks
Solved!
Go to Solution.

yes i did re-calibrating the touchscreen, also i remove battery for 1 minute and than again, after all its not help. when someone call me there are two option ,green accept,,and yellow reject,, but when i wants to accept call and touch green ,,nothing happen i keep try pressing green ,green,, but no,, and if i only JUST touch yellow reject its work , and its reject,,, so in short only problem accpet call?

Problem -repeated automatic calls thro' maintenance plan

Hi Friends
I m facing a problem in CS module . Repeated service orders being getting created through each maintenace plan for the 3 type of service order which are created by us .
problem description : repeated call thro' maintenance plan in every year even after giving restriction of one year as a SCHEDULING PERIOD.
Preface :
1 . Currently we are creating single cycle plan for individual or multiple equipment through mainteance plan category service management
2. We are expecting only one call for each equipment plan in yar , however it is getting created in next year automatically
IF it is possible , please let me know
Thanks in advace
Thnks & Rgds
Amitabh

Hi Pradhan,
You can use the indicator Completion requirement in the Maintenance plan scheduling parameters. If you set this indicator, the system only generates the next call object once the preceding call object has been confirmed.
Go through this documentation-
For call objects which already exist, this means the following:
The next order is only created once the preceding order has been technically completed.
The next notification is only created once the preceding notification has been completed.
The next service entry sheet is only created once the preceding service entry sheet has been accepted.
Reward if cleared and close the thread.
Keerthi

I have a moto g on prepaid and now when somebody tries to call it says person not accepting calls at this time. What have I done to make it do this and how do I fix it?

I have a Moto G on prepaid. What did I hit to make it say I am not accepting calls at this time? I did it by accident if I have done something on the phone. Please help!! I need to get it fixed.

Finally got to the store to see what was going on. I didn't do it. My previous carrier was still holding my number even though it was working before. Verizon called and got it released and problem solved!! Thanks!!

SIGPIPE and socket accept() calls

Hi!
I am developing a client/server application that utilises TCP stream sockets for communication between multiple clients and a single server. The main server thread creates a socket, binds it, listens and waits to accept incoming socket connections. When a connection is established it farms of a thread to handle the client's request. The server is being developed on SunOS 5.8 (sparc).
My problem is that the server receives a SIGPIPE during a blocking call to accept() shortly after a one (and only one) client initiates a connection.
I can't find any suporting documentation as to why SIGPIPE would be raised during an accept() call.
I mean, accept() accepts the socket and returns a file descriptor to the socket. If the client teared down the connection (which the client ISN'T doing) after connecting then I would expect the server to have a valid socket descriptor and EPIPE or SIGPIPEs to occur whenever the server calls socket operations like send() or recv().
Any ideas why the SIGPIPE might be happening in accept()?

Get a new iPhone. it's very difficult to get all the water out of the phone and corrosion will occur inside. Your phone will likely not be reliable even if it recovers.

Smartwatch 2 and Galaxy S4 - Call app - need Accept Call option !!

Hello,
I am very pleased by this new watch but with the Galaxy S4 the smartconnect App for CALL does not allow to have the green ACCEPT CALL buttom .. only the red "reject call" and "answer with preformatted sms" ..
Is it planned by SONY to have this option soon ?
Solved!
Go to Solution.

is not a problem with S4...
Is the normal option of that APP.
If you want to "answer" from the watch you can search other app in the playstore.
I see "callhandlingpro" can make it...
Sony Z3 Compact

Problem by accepting the contract on the Apple iTunes

Well my problem rather not call problem.
Yesterday purchased an iPod Nano Third Generation, coming to my house like any madman who wants to build an apparatus of fashion. Abri box iPod, lei "Quick Guide" decia who download iTunes in the first page of Apple therefore download the latest version which I think is to 7.5, USB to connect the iPod, any property, in salio iTunes "DEVICES" I click there and surprise, leaves "No record ever", "Register later," but no sale option "Register Now" (I think that must say, because I do not see), as well, we di "Register later" after that the contract obviously leaves Apple and for that obviously I click on the box that leaves little. But obviously I can not give an option to click on "OK" that appears on the other side (Obviously I can not see), the problem is that we do not leave the scroll bar and it occupies "Accept the contract" to use all iPod, passing photos, etcetera
What can I do?
How do I do this?
What I did wrong?
In advance, thanks.
*Sorry, my english is not perfect*

Look, just to accept that part of the signing and recording Apple iPod can not see the buttons.
But if I change to another part of iTunes (Example, to the Store) if I can see the other sections on the right side
I mean that if there comes Bar Displacement.
Another look, thanks
*Checare what I say. :)*

My wife and I each have our own apple ID's which we use on our own iPhones and iPads. We share an iMac. Is there a way of enabling Facetime on the iMac to accept calls to either of our IDs without the need to login as that particular user?

My wife and I each have our own apple ID's which we use on our own iPhones and iPads. We share an iMac. Is there a way of enabling Facetime on the iMac to accept calls to either of our IDs without the need to login as that particular user?

no, when using facetime you log in with the apple id you want people to reach you at, so unless you both agree to share one apple id for all the facetime you do, it will be necessary for you to logout and login each time you use the application.

Problem with multiple calls to hr_infotype_operation in a loop

Hi,
Im using infotyp 2003 with the following situation. For a date, e.g. 2011/07/20 and a person_nr I have several time entries, like 08:00-09:00, 10:00-12:00, 15:00-17:00. Now I read the entries with HR_READ_INFOTYPE and store them back unmodified with hr_infotype_operation in a loop in the same report.
data: i_p2003 type standard table of p2003.
CALL FUNCTION 'HR_READ_INFOTYPE'
         EXPORTING
*          TCLAS                 = 'A'
           pernr                 = person_nr
           infty                 = '2003'
         BEGDA                 = '20110720'
          ENDDA                 = '20110720'
*          BYPASS_BUFFER         = ' '
*          LEGACY_MODE           = ' '
*        IMPORTING
*          SUBRC                 =
         tables
           infty_tab             = i_p2003
        EXCEPTIONS
          INFTY_NOT_FOUND       = 1
          OTHERS                = 2.
loop at i_p2003 assigning <p>.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          infty         = '2003'
          number       = person_nr
          validityend   = '20110720'
          validitybegin = '20110720'
          record        = <p>
          operation     = 'MOD'
          dialog_mode   = '0'
        IMPORTING
          return        = return_struct
          key           = personaldatakey
        EXCEPTIONS
          OTHERS        = 0.
endloop.
the first call to hr_infotype_operation succeeds but the following operations fail because of collision. This example is stupid, I know, but it shows the core of a problem I have in a more complex report.
I face the problem that several calls to HR_INFOTYPE_OPERATION cause a collision error even if there cannot be a collision because the data are unchanged.
Any hints on this.
Regards,
JOP

Hi, you must execute a 'BAPI_EMPLOYEE_ENQUEUE' before 'HR_INFOTYPE_OPERATION' and a 'HR_EMPLOYEE_DEQUEUE' after.
See next example:
Bloqueo del empleado
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
    NUMBER = PERNR.
IF SY-SUBRC IS INITIAL.
Si se pudo bloquear el empleado intenta
insertar el infotipo
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    INFTY         = '2001'
    NUMBER        = P0001-PERNR
    SUBTYPE       = i_p2001-subty
    VALIDITYEND   = acdate
    VALIDITYBEGIN = acdate
    RECORD        = i_p2001
    RECORDNUMBER = '000'
    OPERATION     = 'INS'
    TCLAS         = 'A'
    DIALOG_MODE   = '0'
    NOCOMMIT      = ' '
IMPORTING
    RETURN        = I_RETURN
    KEY           = I_KEY.
IF SY-SUBRC IS INITIAL.
VARGT = 'Y'.
ELSE.
VARGT = 'N'.
ENDIF.
No se hace COMMIT debido que el estandar lo realiza
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Desbloqueo del empleado
CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
EXPORTING
NUMBER = PERNR.
Regards,
Diego.

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

Problem with accepting the Ref Cursor in c# program

I am passing an argument as OUT Ref Cursor in a stored procedure. and calling the procedure from my c# program.
I can connect the database successfully but am getting the error on calling the procedure.
I am using the ODBC connection
My procedure's signatures are like:
CREATE OR REPLACE PACKAGE BODY packageName
IS
PROCEDURE GetOutput(returnCursor OUT Sys_RefCursor)
AS
BEGIN
OPEN returnCursor FOR
<<my select statement>>
END GetOutput;
END packageName;
My function call is like:
CString Extract::ExtractScript() const
     CString script;
     script.Format("{Call %s.%s()}", packageName,GetOutput);
     return script;
I can compile the procedure successfully on Toad but while calling the procedure from the C# program it gives following error
Connection Successful
Problem executing SQL {Call packageName.GetOutput()}...
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'GetOutput'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Message was edited by:
user653288

Hi Aga,
Thanks for your response.
I figured out the problem.
I was using the ODBC connection which wasnt updated for Oracle 10g.
I have updated that. Now its working fine.
Thanks again
Regards

Problems with a call transaction

Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advance

Hi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
                            ( contador = 3 OR contador = 4 or CONTADOR = 5 ).
      READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
      d_clave = t_clave-bschl.
      i = i + 1.
      CASE i.
        WHEN 1.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0700'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN t.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=BU'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN OTHERS.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
      ENDCASE.
        READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
                                       zzbtd = t_resumen-zzbtd.
        IF j_hkont = t_porcentajes-cfacpr.
          PERFORM bdc_field   USING 'COBL-PRCTR' t_porcentajes-prctrfac.
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
        ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20801'.
        ELSEIF t_resumen-hkont = t_porcentajes-creca.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20401'.
        ELSE.
          IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 40.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 50.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ENDIF.
*Fin modificacion marzo 2007.----
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
          PERFORM bdc_field   USING 'COBL-ZZBTT' t_resumen-zzbtt.
          PERFORM bdc_field   USING 'COBL-ZZBTU' t_resumen-zzbtu.
          PERFORM bdc_field   USING 'COBL-ZZBTS' t_resumen-zzbts.
          PERFORM bdc_field   USING 'COBL-ZZBAG' t_resumen-zzbag.
          PERFORM bdc_field   USING 'COBL-ZZBRE' t_resumen-zzbre.
          PERFORM bdc_field   USING 'COBL-ZZBC8' t_resumen-zzbc8.
          PERFORM bdc_field   USING 'COBL-ZZBC9' t_resumen-zzbc9.
        ENDIF.
    ENDLOOP.

Problem to accept call.........

Similar Messages

Maybe you are looking for