Problem to access https after upgrade 8.4

Question

Hi, i try to upgrde a new device with no config inside... I put the asa and asdm file in the device (last release), then i simply remove the old asa and the old asdm.
No the https:192.168.1.1 is no longer accessible.
There is my config : Wats wrong ?
ASA Version 8.4(1)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-641.bin
no asdm history enable
arp timeout 14400
object network obj_any
nat (inside,outside) dynamic interface
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
prompt hostname context
call-home
profile CiscoTAC-1
  no active
  destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
  destination address email [email protected]
  destination transport-method http
  subscribe-to-alert-group diagnostic
  subscribe-to-alert-group environment
  subscribe-to-alert-group inventory periodic monthly
  subscribe-to-alert-group configuration periodic monthly
  subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:635fe2f7c278eb79cacb80ba4054cf36
: end
And my flash :
ciscoasa(config)# show flash
--#--  --length--  -----date/time------  path
    3  4096        Feb 23 2011 06:39:32  log
   88  1868412     Jun 06 2007 13:35:44  securedesktop-asa-3.1.1.29-k9.pkg
   89  398305      Jun 06 2007 13:36:08  sslclient-win-1.1.0.154.pkg
   91  24938496    Feb 23 2011 06:30:14  asa841-k8.bin
   92  15841428    Feb 23 2011 06:34:02  asdm-641.bin
    6  4096        Feb 23 2011 06:39:46  crypto_archive
   93  1513        Feb 23 2011 08:25:36  7_2_2_0_startup_cfg.sav
   11  4096        Feb 23 2011 06:40:04  coredumpinfo
   12  59          Feb 23 2011 06:40:04  coredumpinfo/coredump.cfg
   94  1189        Feb 23 2011 06:40:04  upgrade_startup_errors_201102230640.log
   95  1189        Feb 23 2011 08:25:42  upgrade_startup_errors_201102230825.log
127111168 bytes total (83673088 bytes free)
Thx for your help

Answer 1

The insuficient memory can be a problem ?
Startup :
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)6 08/21/06 17:26:53.43
Low Memory: 632 KB
High Memory: 251 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
00  01  00   1022   2080  Host Bridge
00  01  02   1022   2082  Chipset En/Decrypt 11
00  0C  00   1148   4320  Ethernet           11
00  0D  00   177D   0003  Network En/Decrypt 10
00  0F  00   1022   2090  ISA Bridge
00  0F  02   1022   2092  IDE Controller
00  0F  03   1022   2093  Audio              10
00  0F  04   1022   2094  Serial Bus         9
00  0F  05   1022   2095  Serial Bus         9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)6) #0: Mon Aug 21 19:34:06 PDT 2006
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Launching BootLoader...
Default configuration file contains 1 entry.
Searching / for images to boot.
Loading /asa841-k8.bin... Booting...
Platform ASA5505
Loading...
IO memory blocks requested from bigphys 32bit: 9672
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 100 files, 10605/31033 clusters
dosfsck(/dev/hda1) returned 0
Processor memory 109776896, Reserved memory: 41943040
Total SSMs found: 0
Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: 001b.d594.e226
88E6095 rev 2 Ethernet @ index 07 MAC: 001b.d594.e225
88E6095 rev 2 Ethernet @ index 06 MAC: 001b.d594.e224
88E6095 rev 2 Ethernet @ index 05 MAC: 001b.d594.e223
88E6095 rev 2 Ethernet @ index 04 MAC: 001b.d594.e222
88E6095 rev 2 Ethernet @ index 03 MAC: 001b.d594.e221
88E6095 rev 2 Ethernet @ index 02 MAC: 001b.d594.e220
88E6095 rev 2 Ethernet @ index 01 MAC: 001b.d594.e21f
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 001b.d594.e227
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode        : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode     : CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode       : CNlite-MC-IPSECm-MAIN-2.06
Verify the activation-key, it might take a while...
Running Permanent Activation Key: 0xc42d647c 0x0ca7d748 0x30e37928 0x9520e800 0x432e03ab
Licensed features for this platform:
Maximum Physical Interfaces       : 8              perpetual
VLANs                             : 20             DMZ Unrestricted
Dual ISPs                         : Enabled        perpetual
VLAN Trunk Ports                  : 8              perpetual
Inside Hosts                      : Unlimited      perpetual
Failover                          : Active/Standby perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Disabled       perpetual
AnyConnect Premium Peers          : 2              perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 25             perpetual
Total VPN Peers                   : 25             perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
This platform has an ASA 5505 Security Plus license.
Cisco Adaptive Security Appliance Software Version 8.4(1)
  ****************************** Warning *******************************
  This product contains cryptographic features and is
  subject to United States and local country laws
  governing, import, export, transfer, and use.
  Delivery of Cisco cryptographic products does not
  imply third-party authority to import, export,
  distribute, or use encryption. Importers, exporters,
  distributors and users are responsible for compliance
  with U.S. and local country laws. By using this
  product you agree to comply with applicable laws and
  regulations. If you are unable to comply with U.S.
  and local laws, return the enclosed items immediately.
  A summary of U.S. laws governing Cisco cryptographic
  products may be found at:
  http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
  If you require further assistance please contact us by
  sending email to [email protected].
  ******************************* Warning *******************************
Copyright (c) 1996-2011 by Cisco Systems, Inc.
                Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
                Cisco Systems, Inc.
                170 West Tasman Drive
                San Jose, California 95134-1706
**   *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING ***   **
**          ----> Minimum Memory Requirements NOT Met! <----           **
**  Installed RAM:  256 MB                                             **
**  Required  RAM:  512 MB                                             **
**  Upgrade part#: ASA5505-MEM-512=                                    **
**  This ASA does not meet the minimum memory requirements needed to   **
**  run this image. Please install additional memory (part number      **
**  listed above) or downgrade to ASA version 8.2 or earlier.          **
**  Continuing to run without a memory upgrade is unsupported, and     **
**  critical system features will not function properly.               **
Reading from flash...
Cryptochecksum (unchanged): 7a620e51 b4671e2e 0fb4a7b2 b61f13da
Type help or '?' for a list of available commands.
ciscoasa>