Problem to change speed of my plan

Hello,
when i want to change speed of my plan, it's impossible because there's an error at the time of trim operation.
What can i do to solve this problem.
Thank you
Sof Gasiglia

See if this helps
http://www.fcpbook.com/Video7.html

Similar Messages

Problem with downloading speed on itunes and app store.

i have problem with downloading speed on itunes and app store.ihave 6mb/ps plan.whene i download on xperia z downloading speed is about 3mb/ps.but when i download on apple app store or any apple server it giving only 150kb/ps.im doing everything. i change my ip dynamic to static.but nothing is change on speed.plz help me and give me some use full static ip and dns.

Hi JM_7,
If you are having a space issue when trying to sync your iPhone, you may find the following article helpful:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Regards,
- Brenden

Any way to change speed of a clip in "over-write edit" mode?

I want to change the speed of a clip in the timeline without having to lock all the other tracks or having to move the other following clips out of sync. For example I have a clip which lasts for 1 sec, which I want to change to 3 secs. Normally when I do this in the timeline the other clips on the same video tracks which follows, will move their position..... How to change speed in "over-write edit mode"?

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

Unauthorized Change to TV Service Plans

There have been unauthorized changes to my TV service plans twice in the last billing cycles and I'm clearly agitated. The facts:a. On June 19th, I received a Verion email notification stating that my TV plan was changed from Prime to Extreme HD. I know none from our household initiated this change. I called a Verizon rep and wanted an explanation and resolution of this issue. Verizon was able to prove on their part that no call was made that authorized any changes. BUT, Verizon intimated that the change might have been done remotely. I asked them to prove to me how that was possible since none from my household how this is even done. Verizon promised to change back my plan to Prime. My issue with this sequence of events is that Verizon is throwing the burden to the customers to provide proof that the change was not initiated by the latter. b. On July 16th, I received an email bill notifying me that my bill increased by almost $70 from $321 to $385 because of a change in TV service plan from Prime to Extreme HD (again!!!). It is now apparent that Verizon never change back my plan to Prime. I called Verizon rep (Jane) and complained about this incident. I asked them to retroact the changes as I do not (and will not) give Verizon the satisfaction of benefiting from their own mistake and inadequacy. They kept on implying that maybe somebody did the change remotely. How can I prove a negative. When someone buys from Apple Store or Apple iTunes, one needs to put in their password everytime. There is no such thing with Verizon with respect to change in TV service plans according to them. Yes, with respect to buying movies on Fios, one needs to authenticate. But it seems, Verizon, through, utter corporate or institutional laziness, did not care to put the same authentication process and is asking the customers to prove otherwise. I can firmly say that none from my housefhold made any changes remotely, online to our TV service plans. Something is wrong with the Verizon system. But Verizon is totally screwing its customers by not correcting their system or by denying that such a problem exists. If Verizon wants to do right by its customers, then an easy fix can be made by requiring authentication for any change in rate or package plans done remotely or online. Bottom line: No one verbally or remotely authorized a change in my TV plans from Prime HD to Extreme HD. None. The Verizon rep (Jane) who I spoke to promise to escalate and stated that they will correct my current bill. My trust with Verizon is broken. I have wasted three hours resolving the issued outlined in a and b above. My blood pressure is up and am clearly agitated at this point. I need someone Verizon to step up and resolve this situation not only on my behalf but all other customers who might be encountering the same problems as I have. Please help.

You are talking to peers not Verizon. Call them or chat. 1-800-Verizon or use chat which is one of the options on the contact us options on every page http://www.verizon.com/support/residential/contact-us/index.htm .

Firefox 5 does not remember changed speed tweaks. Every time I close the browser they revert to the standard setting..what gives!

Firefox 5 does not remember changed speed tweaks. Every time I close the browser they revert to the standard setting..what gives!'''bold text'''
'''Moderator note: Locked as dupe of [https://support.mozilla.com/en-US/questions/843444 843444] --T'''

Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
Still works on Windows, and with other browsers... It would be great if a fix is available.

Trouble shooting changing speed

Not able to change speed in Final cut express. Telling me there was a problem during a trim operation. Anyone run across this? Thanks

This can happen when the speed change moves the content of the timeline and tracks, usually the audio tracks, collide. There are various ways around this. You can use the F key to match frame to the browser clip, apply the speed change to that, and edit it into the timeline. With the playhead at the start of the clip you can press Cmd-Opt-F to call up a new copy of the clip from the hard drive, apply the speed change there, and then end into the timeline. The last way some people use is to drag the clip to the end of the timeline, apply the speed change there, and then move back into the timeline however you like.

Problem with Authorization for BW BPS planning Folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
if any one has faced the same issue let me know.
Regards,
Abraham

HI ,
I Checked it out we dont have that cube in our system.
Regards,
Abraham

Problem while changing Business Area in Cost Center Master Data

I am having a problem while changing the Business area in cost center master data, the system does not allow to change the business area due to the following reasons;
1. The transactional data already exists for that cost center
2. The desired date required to be changed, falls between analysis period 01.01.2000 to 31.12.2999
Can anyone help me in order to reslove this issue
Thanking in anticipation
Edited by: Arshad Iqbal on May 24, 2010 2:10 PM

Dear Dejan !!
Thanks a lot for resolving my problem actaully i have tested the scenario in Testing Server by changing the fiscal year and the system allowed to change the business area before any transactional data posted.
Thanks Once Again
Regards
Ch. Arshad Iqbal

Problem in changing branding image.

Hi all,
I have a problem in changing the branding image for portal logon page.
To my knowledge I have the change the image file under
\usr\sap\EPD\JC0\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.portal.runtime.logon\layout
But to my surprise I am not able to see gthe com.sap.portal.runtime.logon folder in the server.
Can somebody suugest me what might be the reason.Is it any problem with the versions or something?
Thank You,
Regards,
Rajesh

It is:
\usr\sap\EPD\JC0\j2ee\cluster\server0\apps\sap.com\com.sap.security.core.admin\servlet_jsp\logon\root\layout\
You can do a simple search for branding-image.jpg from \usr\sap\EPD\JC0\j2ee\cluster\server0 to find the location. You can change the location or name in the config tool.
Regards,
Slava

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114957)

Edit Problem after changing and transporting a table view

Hallo Experts,
I hope you can help me.
I changed a Z-table in the Data Dictionary. For this table there exists an Tableview.
After I added three new fields I generate a new tableview:
Utilities -> table maintenance generator
Change -> create maintenance screen -> ok
after this I optimized the layout of the screen.
On our Enviromentsystem my Tableview works perfect.
I can make changes in the table.
Then I transported the new tableview to our testsystem.
There I started the sm30 "Maintain table view" and tried to change table entries.
After a click on "Maintain" the following Message appears:
TK 730 Changes to Repository or cross-client Customizing are not permitted.
The strangest thing is, that before my transport, it worked, I could change table entries.
There were no changes on the userrights.
And I can change a similar table on the testsystem.
I compared the properties of both tables. But I could not find a difference.
Have anybody an idea where the error can be?

Hi
Caution: The table is cross-client
Message no. TB113
Diagnosis
You are in the process of maintaining a cross-client table. You are using the standard table maintenance screen here, which is frequently used to maintain client-specific Customizing entries. This message serves to warn you that each change you make will have an effect on all other clients in the system.
System response
You have the authorization required for cross-client maintenance.
Procedure
Think carefully about the effect of your changes. Due to logical dependencies between client-specific Customizing and applications data on the one hand and cross-client Customizing data on the other hand, changing or deleting cross-client data could result in inconsistencies.
Therefore such changes should be carefully planned and coordinated, taking all the clients in the system into consideration.

Problems in changing Thousand's separator appearance

I am having problems in changing the thousands separator appearance. I am based out of India and here the thousands separator works in format - 1,00,00,000 (i.e. 2 digits after last 3 digits). I want to change this into standard 3 digit thousands separator - 1,000,000,000. However not able to do this. Kindly suggest any workaround for this.

Yes! You can definitely change and customize integers.
Its a little tricky to explain how you have to do this in the Numbers interface but follow below:
Select cells or table > open Inspector > select Cells tab (4th from the left) > Use the drop down list under "Cell Format" and select "Custom" at the bottom....
From here you can edit your own intergers by dragging elements from below onto the field above (See example below). Don't worry if the elements do NOT match what you want below... You add the element by dragging it, THEN once in the field you can click on it and edit how many digits there are, as represented by '#' simply by pressing Up and Down on the keyboard, Or clicking on its own little drop down arrow to access features like "Remove separator". Then in between these elements simply type a comma " , " and drag the next element, keep editing away like that and you should get something like what I have below:
Feel free to ask any more questions PrashKot :]

Path problem during Change of Original

Hello,
I am facing path problem while changing the Original file in a DIR.
let say i created a DIR x and attached file a.txt from c:\ and saved the DIR.
Now if i use cv02 and select a original for change the popup window comes with data carrier and original file path the path is shown as c:\a.txt which is actual original path.
if i click on continue it is opening the c:\a.txt files and changes are done on the original file on my pc.
This way my original file is changed on pc and in DIR also.
I want to know how to avoid this?.
Regards
Shiv

That is why they call it document "Management". The Original File is in the "Vault" where it can be managed, not on the desktop. If you want to protect/save the file on your desktop, set the flag in the config of the workstation application to not allow "rename" of the temporary file. You are just attempting to circumvent the intended design of the system. What you should really do is set the flag to "delete" the file after check-in.

Having problem with change of name in the datagrid Coding

I am having problem with changing the name of the datagrid header text name for one of the data either in the flash file or the php file.
The thing is i want to change the Course_Name to Course Name that has no underscore so that it will look nicer in the datagrid but if I change it in the php file like SELECT Course_Name as 'Course Name' ....., it will not turn out in the datagrid when I CTRL ENTER the flash file but the others like Price,description and display is shown.
There is no problem with my php code but I do not know how to change the Course_Name into Course Name so please help me resolve this error that I am having.
This is my flash code
function goCourse(e : MouseEvent):void
gotoAndStop(5);
refreshResponder = new Responder (refreshSuccess, onFault);
connection = new NetConnection ();
connection.connect (gateway);
dataDG.addEventListener (Event.CHANGE, gridItemSelected);
refreshData (true);
function gridItemSelected (e: Event): void {
ID = e.target.selectedItem.ID;
courseTxt.text = e.target.selectedItem.Course_Name;
priceTxt.text = e.target.selectedItem.Price;
descTxt.text = e.target.selectedItem.Description;
private function getParams () {
var param: Object = new Object ();
param.ID = ID;
param.Course_Name = courseTxt.text;
param.Price = priceTxt.text;
param.Description = descTxt.text;
return param;
private function refreshData (refresh: Boolean): void {
if (refresh)
connection.call ("Course.viewCourse", refreshResponder);
private function refreshSuccess (result: Object): void {
dataDG.dataProvider = RecordSetDP.toDataProvider (result);
dataDG.columns = ["Course_Name","Price","Description","Display"];
private function onFault (fault: Object): void {
trace (String (fault.description));
This is my php file code.
function viewCourse()
$this->connect();
$sql = "SELECT Course_Name,Price,Description,Display
FROM coursetb";
return mysql_query($sql,$this->_connection);

i don't see where you're calling your php file in your code, but change 'Course Name' to 'Course_Name' (or vice-versa) there.

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Problem to change speed of my plan

Similar Messages

Maybe you are looking for