Problem to change the domain

Hi,
I am to change the domain in the client machine but I have got this
On the client, I am able to ping the domain and I've also put the IP of the domain server as DNS server like
Many Thanks & Best Regards, Hua Min

Thanks all.
I have done some change to one connection on the client machine
C:\Users\HuaMin>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : HMC-WIN7ENT
   Primary Dns Suffix . . . . . . . : win08.huamin.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : win08.huamin.com
                                       abc.com
Ethernet adapter Local Area Connection 2:
   Connection-specific DNS Suffix . : abc.com
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Desktop Adapter #2
   Physical Address. . . . . . . . . : 08-00-27-E7-47-33
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : ?.255.241.11(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.240.0
   Lease Obtained. . . . . . . . . . : Thursday, January 16, 2014 9:38:56 AM
   Lease Expires . . . . . . . . . . : Thursday, January 16, 2014 2:10:10 PM
   Default Gateway . . . . . . . . . : ?.255.240.1
   DHCP Server . . . . . . . . . . . : 10.17.8.2
   DNS Servers . . . . . . . . . . . : 210.0.128.241
                                       210.0.255.144
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Desktop Adapter
   Physical Address. . . . . . . . . : 08-00-27-6D-E3-04
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 103.11.228.33(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.192
   Default Gateway . . . . . . . . . : 103.11.228.1
   DNS Servers . . . . . . . . . . . : 127.0.0.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6B6B9412-430A-409D-BB5F-3C52D6BD6B93}:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::200:5efe:103.11.228.33%13(Preferred
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 127.0.0.1
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter 6TO4 Adapter:
   Connection-specific DNS Suffix . : abc.com
   Description . . . . . . . . . . . : Microsoft 6to4 Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : ?.670b:e421::670b:e421(Preferred)
   IPv6 Address. . . . . . . . . . . : ?.71ff:f10b::71ff:f10b(Preferred)
   Default Gateway . . . . . . . . . : ?.c058:6301::c058:6301
   DNS Servers . . . . . . . . . . . : 210.0.128.241
                                       210.0.255.144
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.abc.com:
   Connection-specific DNS Suffix . : abc.com
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::200:5efe:?.255.241.11%15(Preferre
d)
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 210.0.128.241
                                       210.0.255.144
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
But I still get the same when changing the domain.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "my-friend.co":
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.my-friend.co
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured
to use DNS servers with the following IP addresses:
127.0.0.1
210.0.255.144
210.0.128.241
- One or more of the following zones do not include delegation to its child zone:
my-friend.co
co
. (the root zone)
Many Thanks & Best Regards, Hua Min

Similar Messages

Interesting Presence issue and changing the domain

I've got an interesting problem that I recently posted about in a different discussion forum.
Basically I've got a presence setup. This is federated with an OCS. The OCS domain is something like company.com This is the same as the email domain, and the SIP uri's are sip:[email protected]
The issue is that when the presence server was set up, the proxy domain was set as something like cmp.local. cmp.local is the domain for the entire internal MS infrastructure. The problem appears to be that this conflicts with the internal domain. So when looking up in the directory instead of getting the OCS domain it gets replaced with the cmp.local. Functionally this results in the jabber client being unable to add federated OCS contacts from the directory as they just get added as internal jabber contacts.
I'm thinking of changing the domain on the presence server to something like jabber-cmp.local, i.e. a domain that doesnt exist. Once we migrate to jabber we'll change the domain again back to company.local so we can federate externally properly. Does anyone have any experience of doing something similar? Any pitfalls anyone can point out?

Federation can only be setup a few ways
- Intra domain (company.com   federated to im.company.com)
- inter domain (company.com federated to abc.com)
- Intra domain partitioned (Company.com federated to company.com)
You need to define this to make any of the with CUPS 8.6.4 (you should run latest and greatest).   Now, depending on which version OCS you have R1 or R2 is important as well.
Put the CUPS server in the domain you want it in. Some of the SIP paramenters can be pushed for Jabber 4 windows XML file IE:
msRTCSIP-PrimaryUserAddress
true
sip:>

Change the Domain of a data elements in the extraction structure

Hi experts
I was transport a extraction structure from BW DEV to BW QA System, but in STMS of QA System generated an error "Active ABAP Dictionary" then in T-code SE11 -> visualize -> Components Tab i am watching that the Data Type of a component ZBITRST is QUAN whereas in BW DEV system the Data Type is CHAR which is correct
by double-clicking the component I am watching that the domain of both is different, How I can change the domain in QA System / BIC/VQUAN_000013_000003 to / BIC/VCHAR_000003_000000?
or What is the solution to this problem?
Thanks

Hi
As you told you have correct domain for the info object in DEV system, transport this single info object through one transport.
now check whether domain of the info the info object is correct.
now you can import the extraction structure.
If you want to change the domain type, goto edit mode of info object and select the data type CHAR instead of UNIT and activate the info object. this will change the domain type of your Info Object.
Regards,
Venkatesh

Changed the domain of the server where BO Edge is installed

We changed the domain of the server where BO Edge resided and the domain of our database server. We are not getting the error message "Failed to register with name server. Reason: a server of this name already exists". This occurs whenever we try to start any of the servers from the CCM. What are or did we do wrong?

My understanding is that Edge is the same base code as XI 3.0 and it shouldn't have any errors when changing domain name or hostname. I don't have this version installed but in the CCM is there a CMS (+other services) or a SIA?
I'm not sure what changing the domain on the DB server would do, What type of DB are you using?
Regards,
Tim

How to change the Domain name of portal

Hi All,
We've developed an application using the WDA(Web Dynpro for ABAP) on BI 7.0 and in this we are displaying the BI reports as well. This whole appliaction works fine when we run this on the BI portal 7.0. But when we run it from the Enterprise Portal 6.0
the reports don't show up and it goes in the never ending loop. After research we found that this is happening because the
Domain names of the BI portal and the Enterprise Portal are not the same. And as per one of the SAP note the prerequisite for the WDA application to run on the EP portal is to have the same domain name on both the portals.
Now we are planning to change the domain name on the BI portal.
Does anyone let me know how and where we need to go and change this Domain name ?
Thanks in advance for your help.
Regards,
Alok Varma

Hi,
first step is to configure your DNS server. There has to be a name resolution for portal.domain.tld to your portal server's IP address.
Right now I don't have access to Visual Administrator, so I cannot check if there is any domain specific configation to be done on the server side.
As for the SSO between your Portal and WDA: you'll have to recreate the portal server certificates and import it into the ABAP system.
The Logon Ticket MYSAPSSO2 has to be issued to the new domain by the portal! If not, your browser won't sent this cookie to the BI system and no SSO data will be transmitted to the BI system.
br,
Tobias

How to change the domain in zee table

hi
how to change the domain in zee table
the domain is activated , i want to change the length.
can anyone help me

Go to SE11.
Give the name of the z-table. Click change.
double click on the data element name and over there again double click on the domain name. So you are in the domain.
There change the length of the domain as per your requirement.

Where/How to change the domain?

Hello,
the domain of the application server has changed.
Where or how do I have to change the entries for the domain the application server is in?
For example:
old Domain:
myreportserver.olddomain.com
new domain:
myreportserver.newdomain.de
So, where and which entries do I have to change?
Thanks a lot.
Best regards.
Florian

Either, you can...
Use $ORACLE_HOME/chgip/scripts/chgiphost.sh to change the domain name
or
Create a virtual host where the ServerName use the new Server.domain that you wish.
In this forum you may find info for both ways, look for chgiphost and virtualhost.
Greetings.

HT1918 problem with changing the payment information

I've got a problem with changing the payment information !!
when I change them and I followed the instruction , and when I click done
it says " for assistance, contact iTunes support at " the link " . and nothing
change , so what should I do ?

Hi Bart,
The description of the field VBKD-BSTKD will appear in sales order (VA01/02/03) Header Order data tab.
If you notice the text for below one it is PO Number where Number starts with upper-case N and it iis not the one which you changed.
Also this is a hyperlink to sales header order data screen.
You need to enhance the code via sales exit to fix this.

How to safely change the domain controllers that Exchange use from Out-Of-Site into the In-Site ?

Hi Folks,
I'd like to know what's the best way to edit the Exchange Server 2007 entry
In-Site entries and removing the entries from Out-Of-Site safely without causing any downtime or problem with the workstations ?
From the MSExchange ADAccess Event ID 2080, I can see that the Domain Controllers that is currently used by Exchange Servers is all on the
In-Site lists which I need to decommission due to office building migration and downsizing, the workstations remain in the same building only the servers must go.
Current configuration:
Exchange Servers AD Site: HQ1 (for all roles)
Workstations AD Site: HQ1
Proposed configuration:
Exchange Servers AD Site: Prod-DC1 (for all roles)
Workstations AD Site: HQ1
Thanks.
/* Server Support Specialist */

Hi,
Steve's clarification is right.
From your description, you want to change the DC used by Exchange server. If I have misunderstood your concern, please let me know.
Please make sure the following things before setting the DC for Exchange:
1. New DC has its own IP in its TCP/IP as primary DNS server.
2. New DC is global catalog.
3. New DC has correct DNS settings in the MSDC folder.
4. Restart the Exchange active directory topology discovery service and watch the event viewer, there should be an event that discover both domain controllers. If this happens, then turn off the old DC.
Besides, topology information will remain in the system attendant service for 15 min, so the time to switch to the new one is about 15 minutes.
Hope my clarification is helpful.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support
Amy,
The Exchange Server has been rebooted couple of times but yes, all of the In-Site AD servers are still on not rebooted yet.
So in this case do you suggest me to demote the oldDC and turn off all of the In-Site DC/GC first and then reboot Exchange Server after wards one by one ?
/* Server Support Specialist */

Problems for change the properties for Primitive shapes?

Is there a way to change the properties of Cylinder, Sphere, Cone and Box primitives (com.sun.j3d.utils.geometry.Primitive)?
ie. can you change the radius, height, width, etc after you've already
created this object to the scene?
Thanks for any help!

Hi Anil,
I did modify the property "SLD.selfregistration.hostName" to a fully qualified domain name, (i.e. fgsappitd.fourlis.net), as mentioned in sap note 804124 (performed also the stop and start of applications mentioned in the sap note. However, I still get the error message, whenever I activate my changes in the Integration Directory,
"Unable to notify Adapter Engine 'af.fpd.fgsappitd' that is affected by the data changes
HTTP connection to 'http://fgsappitd:50300/CPACache/invalidate' returns the status code '403' (Forbidden) in response"
It is strange because although I entered the full qualified host name, the error message still shows, in the message above, only the host name.
Just to mention here that when I open an interner browser and run URL 'http://fgsappitd:50300/CPACache/invalidate' it fails. If on the other hand, I open an internet browser an run URL 'http://fgsappitd.fourlis.net:50300/CPACache/invalidate' , it works OK. Therefore, I believe, the problem I get has to do with the missing full qualified host name.
Is there something else I need to do? Do I have to restart the system?
Thanks,
Filippos

How to change the domain name

Our company was bought in an acquisition and for a long time we kept out domain and firewall. Now, we have to move the servers physically and on the new domain. All Oracle servers have been installed with the service of ORANAME.usdv.sdv.com and the TNS names use the same Service tag. The databases created with dbca also get this service extension on install.
I did not find a lot to read about a domain change in Oracle. Looking for an idea on what complications I may expect and how to actually perform the domain change, tips and tricks, some materials to read, etc.
It looks that I have to change the tnsnames.ora on all clients,but is this going to be enough? Do I need to redo netca on clients and servers?
Thanks a lot, mj

Thanks a lot. I'm sorry I did not specify that in my initial post - this was actually what I read but could not find anything more on that...
I have a couple of questions like:
When do I have to alter the database to change tha name - before or after to join to the new domain?
Also, is the statement "ALTER DATABASE RENAME GLOBAL_NAME TO <dbname.new.domain>" the only thing I need to do? It looks that this command never changes the v$parameter value. Do I need to change it and how to do that?
The doc said :"DB_DOMAIN has no effect on the global database name" but it this true?
Also, is this valid for both 10.2.0.2 and above and 9.2.0.7?
Thanks a lot,mj
Message was edited by:
user494147

Problem in Changing the Service Order Using BAPI_ALM_ORDER_MAINTAIN

Hi ABAPers,
I want to change the Service order(TCODE-IW32) Using BAPI_ALM_ORDER_MAINTAIN.But i don't know what are all the
Parameters needs to be passed.I want to chnage the COMPONENT of the Service Order.Please anyone tell me what all are the
mandatory parameters should be passed to change the COMPONENT of the Service Order.If anyone has the code Please send me.
It is very Urgent Kindly help me to Solve this problem.
Regards,
Ashok.

Hi Ashok,
i am sending u the sample eg thread for bapi create i thnk u can find out the mandatory fields frm tht ...
check this link though it is for create the mandatory fields and structure will be same .
Create Order BAPI
regards
Sana M.
reward for useful answers..

Problem while changing the width of the Indesign document through inx.

Hi Guys,
I am facing a problem related to the width of InDesign documents. Description of the problem is as follows:-
I have created an InDesign document with height = 700 and width = 500 and export this as an inx file (lets say Doc1.inx).
As "Doc1.inx" is just an xml file I have made certain changes to the height and width fields of the dcoument in it. (Height =900 and Width = 600)
For Height changes are made under following tags :- <docu>
 <docp>
 phgt = "U_900" ;
For Width changes are made under tags :- <docu>
 <docp>
 pwdt = "U_600";
Now when I opened the modified "Doc1.inx" file with InDesign the modifications for height are correctly reflected, but the width of the column doesn't gets changed. Please open the attachments to see the difference.
Attachment contains the snap shots of documents created at step 1(Initial_Doc1.indd) and step 3(Modified_Doc1.indd).
What should be the modifications we have to do in inx file to reflect the correct modified width of the document. Also is there any document or article which gives the correct understanding of the tags used in inx files.
Any help will be appreciable.

I'm having troubles getting any sensible values at all using CS -- on the other hand, you forgot to mention your version, so I figgered I could try.
(Just as an example, setting width & height to 600 pt and 900 pt -- you don't mention your units of measure either, is it meters? inches? -- I get "phgt="u_408c2000~0" pwdt="u_4082c000~0"", which doesn't make sense. Cicero's!? [*])
But further below, I can see some definitions for columns: count (colc="l_1") and some measurements in that same system, which I suspect to be the width and height you are looking for. You switch between describing you succesfully changed the width and height of the document, and complaining the column does not change. Apparently, the column width is defined in itself, rather than using the "document marges" you are used to in the interface itself.
[*] On second look, I can see more hexadecimal digits in other 'numbers'. It must be hexadecimally encoded IEEE floating point numbers -- "408c2000" decodes to 4.378906, and 4082c000 to 4.085938 -- both valid floating point numbers, but still I wouldn't know in what system.
I hope your version uses regular decimal notation!

Problem while changing the query of the field in Oracle apps 11.5.10

Hello All,
Requirement:
User want to change the query of the LOV attached to Ordered item field on Line items tab on the Sales order form in Order managment
Block name = 'LINE'
Field name = 'ORDERED_ITEM_DSP'
LOV attached to this field in FMB: ITEMS
LOV attached to this field in front end: ENABLE_LIST_LAMP
Problem: Following code is firing at all points (Debug messages are appearing at all points) but Query of the LOV attached to item is still same.
How can in FMB LOV is "ITEMS" and in front end "ENABLE_LIST_LAMP"
My guess is there is some problem with the LOV name which we are passing in the code below. Because LOV name attached to item are different in front end and FMB. There is no LOV in FMB which has “SYSTEM ITEMS Description” kind of structure.
I have written following code in custom.pll (l_chr_rg_query is query taken from the record group attached to “ITEMS” named LOV with some modifications ex: rownum<6 so that it will show only 6 records in LOV if it is really firing our query for LOV)
IF ( form_name = ‘OEXOEORD’
AND block_name = ‘LINE’
AND field_name = ‘ORDERED_ITEM_DSP’
AND event_name = ‘WHEN-NEW-ITEM-INSTANCE’
THEN
MESSAGE (‘message1’);
l_chr_rg_name := ‘XXLION_UNIFORM_CODE_RG’;
l_chr_rg_query :=
‘SELECT item, item_id, item_description, inventory_item_id,item_identifier_type,null item_identifier_type_meaning, ‘
|| ‘inventory_item, address, cust_address, item_definition_level ‘
|| ‘FROM oe_return_items_v ‘
|| ‘WHERE (sold_to_org_id = :parameter.lov_num_param1 OR sold_to_org_id IS NULL)’
|| ‘ and rownum < 6 ORDER BY item’;
MESSAGE (‘message2’);
l_rg_id := FIND_GROUP (l_chr_rg_name);
MESSAGE (‘message3’);
IF ID_NULL (l_rg_id)
THEN
MESSAGE (‘Creating record group here’);
l_rg_id :=
CREATE_GROUP_FROM_QUERY (l_chr_rg_name, l_chr_rg_query);
END IF;
errcode := POPULATE_GROUP (l_rg_id);
MESSAGE (‘ERROCODE is : ‘ || errcode);
L_lov_id := FIND_LOV (‘ITEMS’); --My guess is this LOV name is the source of problem.
MESSAGE ('Error code is4');
SET_LOV_PROPERTY (l_lov_id, group_name, l_rg_id);
MESSAGE ('Error code is5');
SET_ITEM_PROPERTY ('LINE.ORDERED_ITEM_DSP', lov_name, 'ITEMS');
END IF;

I found that there is no problem with code. My problem is not technical, its a functional problem.
It is related to Inventory's "System Items" KFF.
Can anybody tell me, to this "System Items" KFF, one value set is assigned. but it is of none type of value set. so from where the values in LOV are coming?

Problem when changing the target quantity for a contract

Hello,
I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
Is someone can help me to solve this problem?
Thank you in advance.

Have you tried selecting the page, and then changing the theme directly on that page?

Problem to change the domain

Similar Messages

Maybe you are looking for