Problem to choose SLD as DATA Source on SMSY.

Hi all,
I have installed the Solution Manager system 7.0 ehp1. I have problem to choose u201CSLDu201D as DATA Source on HeadData I can just choose u201CTMS/FRCu201D. Is it possible to add SLD to DATA Source list.
I did start batch job on SMSY_setup and That working correcet. But I have just u201CTMS/FRCu201D On Data Source list..
Can anyone please help we this?
I am really going nowhere!!!!!!
Regards

If you are adding the system manually to the SMSY, then the data source cannot be SLD. Only systems which are updated from the SLD will have the datasource as SLD.
If you setup the SLD, and then connect the SLD to solution manager the SMSY can then be updated from SLD.
Also, with SP18 & SP19, the way the system landscape is updated has changed. The Program RSGET_SMSY reads from SLD, then from TMS/RFC. so if something is different between SMSY and the satellite system it is overwritten in SMSY and since the last data which is read will be from RFC, then the data source is TMS/RFC.

Similar Messages

Change Data Source in SMSY from "manual" to "SLD"

Hello,
unfortunately some of my systems appear in SMSY with data source "manual" although the data is collected automatically via SLD. How can I switch the data source to "SLD" for these systems?
I already tried to delete the system in SMSY. After the next SLD-Sync-Run the system still has the setting "manual".
Can someone help?

I have the situation where I have a system in the SLD but cannot get the SLD to update it. The data source is Manual (Automatic Refresh). I've tried changing this to the other manual data source, running the landscape fetch, changing back to manual (automatic refresh) and running landscape fetch again. Still, the data source says Manual (Automatic Refresh). I even tried to delete everything about this system and add it back. I couldn't get the corresponding system component deleted but did manage to delete everything else. After re-creating, I still have the problem. I can't find the solution. Any ideas from anyone? Thanks!

Problem during extraction using generic data sources

Hi
While performing extraction(master data) using generic data sources I am getting a problem.
while selecting application component, I am unable to find SD to select it.What should I do?
I selected CRM as application component and did the extraction , it is successful.
But what about if we want to select SD? I am guessing it as an installation problem ... Anyone plz help me
Thank you
Deepthi

Hi Deepthi,
Looks like the RFC connection between source system and BW system is broken..
Contact your basis team to check the connection what went wrong.
once the connection is re-established you can gohead ...
Try out this procedure
Type Transaction SM59.
a.) Open the RFC Destinations.
b.) Find your Source System and double click on it.
c.) Technical setting should contain information regarding your source
system
d.) Logon Information should contain source system client and name &
password for you remote logon.
**Suggestion : our remote name for our R/3 was ALEREMOTE. We use
BWREMOTE so that we can monitor without confusion.
e.) Execute your 'Test Connection' & 'Remote Logon'. You connection
should be You should NOT be prompted for a password.
f.) Repeat above to verify RFCs for other systems
regards
KP
Edited by: KP on Dec 14, 2009 12:11 PM

Problem in configuring Hyperion Planning Data Source configuration.

* I have configured all the components of Hyperion Planning except Data Source Configuration. The problem is when i provide server name, username and password when the system prompts to enter the essbase server information, the system gets hang and does not respond. I am stuck in this step (data source configuration) and cannot move forward.*
Please help me out???

make sure given credentials are correct are not.

Problem testing deployment of SAP Data Source

Following the Installation Guide for SAP Data Source on Oracle iAS10g 9.0.4.0.0 on Windows 2000 Server SP4 Im stuck with error
500 Internal Server Error
java.io.IOException: javax.servlet.ServletException: Class oracle.webdb.reformlet.ReformletPortlet has no set or add method for tag "localePersonalizationLevel" at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.showTestPageURI.... (full shown at end)
when testing URL
http://sgr-a31.dk.ementor.dom/portalTools/omniPortlet/providers/sap
Can anybody help ?
Creating the External Application logon etc. worked fine !
500 Internal Server Error
java.io.IOException: javax.servlet.ServletException: Class oracle.webdb.reformlet.ReformletPortlet has no set or add method for tag "localePersonalizationLevel" at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.showTestPageURI(Unknown Source) at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.showTestPage(Unknown Source) at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.handleHttp(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at oracle.webdb.provider.v2.adapter.SOAPServlet.doHTTPCall(Unknown Source) at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)

PUBLISHING THE SAP DATA SOURCE PLUGIN FOR OMNIPORTLET FOR SAP, UNSUCEFULL
### What kind of problem do you have? ###
Managing External Applications
### Describe the problem you are having in detail. Include any notes, guides, o Documentation:
OracleAS Portal Integration Solutions
Installation Guide for SAP Data Source
Revision No Last Update
1.0 December 19, 2003
1.1 January 16, 2004
Follow step-by-step.
1 - Upgraded portalTools to Version: 9.0.4.1
2 - Used the 'Upgrading the Portal Tools Application' instroctions, making sure
to stop OC4J's before copying files 'onto' my system.
3 - Restarting the OC4J_Portal
4 - Testing the deployment @ Provider Test
Page:
http://portaldev:7778/portalTools/omniPortlet/providers/sap
Welcome
Congratulations!! You have successfully set up the SAP Data Source
Provider.
5 - Creating the external application was successful.
SAPExternalApp
6 - Publishing the SAP Data Source
Okey...
Fill up Filds, as describe..
Application Name: SAPExternalApp
Login URL:http://portaldev:7778/portalTools/omniPortlet/servlet/login
User Name/ID Field Name: Username
Password Field Name: Password
POST
VALID SAP CLIENT (TESTED!!!)
clientId 400 Check this box
language EN Check this box
systemId 00 Uncheck this box
hostname xxx.xxx.xxx.xxx Uncheck this box
connectionPoolSize 5 Uncheck this box
7 - When click on the link SAPExternalApp , got following error ...
500 Internal Server Error java.lang.NoClassDefFoundError:
com/sap/mw/jco/JCO
### Provide any error numbers, or error text that you are receiving. Include any
500 Internal Server Error
java.lang.NoClassDefFoundError: com/sap/mw/jco/JCO
and so on ...
TAR has been assigned to an analyst -- Sending email.
03-JUN-05 11:44:44 GMT
Hi,
Thank you for using MetaLink. We are currently reviewing/researching the situation and will update the SR / call you as soon as we have releva
nt information. Thank you for your patience.
Best Regards,
Pascal Brand
Oracle EMEA Portal Competency.
STATUS
=======
@WIP -- Work In Progress
03-JUN-05 11:49:30 GMT
UPDATE
=======
It seems one of the classes in missing in the OC4J class path. (com/sap/mw/jco/JCO).
03-JUN-05 11:50:15 GMT
OWC Conference 25816178
Start : 03-Jun-2005 11:50:15 GMT
Duration : 121 minutes
Hosted by : BRAND,PASCAL
Rating : Good
Finish status : graceful
Playback URL : The recording of this conference is not published
Comments :
Attendees : 2
peres () From: to
peres () From: to
peres () From: 12:07:10 GMT to 13:51:27 GMT
PASCAL BRAND ([email protected]) From: 11:50:33 GMT to 13:51:41 GMT
03-JUN-05 11:51:18 GMT
OWC REQUEST
============
Hi,
I would like to collaborate with you in a 20 minute Web Conference (OWC) to progress your issue. Please follow these
steps:
1. Log into Metalink (http://metalink.oracle.com) using INTERNET EXPLORER.
2. Click on Oracle Collaborative Support button on lower left side
3. Under the list of Upcoming Public Conferences, identify the conference with the Confere
nce Title which matches your TAR#4414221.994, and click Join Meeting. (If you do
not see your conference, click on Full List button)
OR
Enter the Conference ID: 25816178
4. Enter your CSI# as the Conference Key, your name, email address, and company name and click Join Conference.
Please join this collaboration session as soon as possible.
Thank you,
Pascal
STATUS
=======
@CUS -- Waiting for Customer Update
03-JUN-05 12:06:30 GMT
ISSUE CLARIFICATION
====================
After configuring the SAP Data Source Provider, customer can reach the test page but can't configure the external app
lication.
500 Internal Server Error
java.lang.NoClassDefFoundError: com/sap/mw/jco/JCO
at oracle.webdb.reformlet.plugin.datasource.sap.jco.JCOUtils.
testForAuthentication(Unknown Source)
at oracle.webdb.reformlet.plugin.datasource.sap.jco.JCOUtils.
testForAuthentication(Unknown Source)
at oracle.webdb.reformlet.plugin.datasource.sap.LoginServlet.
doGet(Unknown Source)
eos (end of section)
ACTION PLAN
============
1. Can you check in which jar or zip file this class is located.
com/sap/mw/jco/JCO
2. Add the jar or zip file in the orion-applications.xml library path definitions.
3. restart the OC4J instance where the SAP provider is located.
eos (end of section)
Let me know if this helps,
Pascal
03-JUN-05 12:06:44 GMT
Email Update button has been pressed: Sending email to [email protected].
br.
DATA COLLECTED
===============
COLLABORATION
After adding the sapds.jar and the sapjco.jar in the $ORACLE_HOME/portal/jlib and having restarted the OC4J_POrtal, we have and other error
with something like:
NOEXEC shared libraries..
It seems to be related to the SAP librairies for AIX.
Customer will upload the complete error message on metalink.
We have tried to set LD_LIBRARY_PATh and LIBPATH in the environement and in the opmn.xml for OC4J_Portal.
This didn't help.
eos (end of section)
ACTION PLAN
============
1. Can you upload the complete error message we have seen on the screen.
eos (end of section)
Thanks,
Pascal
03-JUN-05 14:05:21 GMT
Email Update button has been pressed: Sending email to [email protected].
br.
03-JUN-05 14:24:30 GMT
UPDATE
=======
Hi,
I'm afraid but I have the feeling the problem is due to wrong AIX shared libraries.
ACTION PLAN
============
1. Can you ask for reloading the libraries from the SAP services site and make sure they are for
AIX.
eos (end of section)
UPDATE
=======
The SAP provider is not suported by Oracle support as it is written in the SAP plugin installation guide:
NOTE: The OracleAS Data Source Plugin for Omniportlet for SAP is a sample released for
test, evaluation, and education purposes. It is not supported through formal Ora
cle Support mechanisms. We are, however, very interested in receiving your feedb
ack. Please post any suggestions, questions, or issues to the 'Portal - Portal
Development Kit' Discussion Forum on OTN. We will respond as quickly as possibl
e."
The developers are checking the forum for the questions.
Please use this forum for futur investigation.
I'm sorry not beeing able to help more.
UPDATE
=======
Hi,
I am inactivating this SR, as the OracleAS Data Source Plugin for Omniportlet for SAP is a sample released for test, evaluation, and ed
ucation purposes. It is not supported through formal Oracle Support mechanisms.
Best Regards,
Pascal Brand
Oracle EMEA Portal Competency.
+++++++++++++++++++++++++++++++++++++++++++++++++++
Try with SAJCO 2.1.5 but havenÂ´t worked.., paperwork sugested 2.0.5, canÂ´t find anywhere...
DoesnÂ´t work with: 2.0.5 or 2.0.10
Any help???

Problem while adding a new data source for the demo for mapviewer...

hello,
i use oracle 10g enterprise edition. i imported the necessary dump files and get the necessary scripts worked. i want to see the demo results in mapviewer. for that, i have to add a datasource. the XML code in order to realize this purpose is:
<?xml version="1.0" standalone="yes"?>
<non_map_request>
<add_data_source
name="mvdemo"
jdbc_host="c-0y5wp0jvd2bf8"
jdbc_port="1521"
jdbc_sid="mvdemo"
jdbc_user="!mvdemo"
jdbc_password="tiger"
jdbc_mode="thin"
number_of_mappers="3" />
</non_map_request>
i press the submit button. then it wants me to enter a username and password. the default is admin/welcome. then i see this result on the browser:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
 <oms_error>
Message:[MapperConfig] eÅleme verileri kaynaÄÄ± eklenemiyor.
Sat Feb 26 02:29:19 EET 2005
Severity: 0
Description:
 at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.java:583)
 at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.java:315)
 at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
 at oracle.lbs.mapserver.oms.doPost(oms.java:409)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
 at java.lang.Thread.run(Thread.java:534)
</oms_error>
by the way, the error message on the application server screen:
05/02/26 02:29:16 INFO [oracle.lbs.mapserver.MapServerImpl] adding a map data sr
c [name=mvdemo]
05/02/26 02:29:18 WARN [oracle.sdovis.ds.nods] java.sql.SQLException: G/â istisn
asÂ²: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
n.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
.java:120)
at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
a:613)
at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
java:582)
at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
a:315)
at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
at oracle.lbs.mapserver.oms.doPost(oms.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
05/02/26 02:29:18 WARN [oracle.sdovis.ds.nods] connecting to database using jdbc
thin driver...
05/02/26 02:29:19 ERROR [oracle.sdovis.ds.nods] java.sql.SQLException: G/â istis
nasÂ²: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
n.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
.java:136)
at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
a:613)
at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
java:582)
at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
a:315)
at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
at oracle.lbs.mapserver.oms.doPost(oms.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
05/02/26 02:29:19 ERROR [oracle.sdovis.ds.nods] java.sql.SQLException: G/â istis
nasÂ²: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
n.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
.java:136)
at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
a:613)
at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
java:582)
at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
a:315)
at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
at oracle.lbs.mapserver.oms.doPost(oms.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
05/02/26 02:29:19 ERROR [oracle.lbs.mapserver.core.MapperConfig] java.lang.Illeg
alArgumentException: Error creating NativeOracleDataSource.
at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
.java:196)
at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
a:613)
at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
java:582)
at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
a:315)
at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
at oracle.lbs.mapserver.oms.doPost(oms.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
if someone could help about what to do, i would be grateful..

when defining a data source through the admin web page, don't add '!' in front of the password.
! is needed only when configuring a data source in the mapViewerConfig.xml file.

Bill Presentment Architecture, how to Overide Default Rule and ensure the AR Invoice/Transaction Chooses "Customer Transaction Data Source"

Hi Intelligentsia,
we are on 12.2.4 on linux, i have setup external template with supplementary Data source as "Customer Transaction Data Source", when i test it fails, i am not able to debug it , however when i run the BPA Transaction Print Program (Multiple Languages) it always gives me the default layout.
Query is
How do i ensure the Default rule Does not apply to my Invoice and i am able to override it
is there a method to explicitly Ensure the Supplementary Data Source as "Customer Transaction Data Source", when i am creating the AR Invoice/ Transaction? Am i missing some setup in AR Invoice Transaction Flexfield where i need to setup this "Customer Transaction Data Source" as the DFF Context ?
please let me know if you need any more information.
Abdulrahman

Hello,
Thanks for the answer. When you say rule data is that Rule creation date or the "Bill Creation From Date" that we setup while creating the rule? I have created a new invoice after the rule created, but it did not pick the new custom template.
I have another issue. It would be greate if you could help. I have split my logo area into 2 vertically to display logo in one and legal entity and addres on the other one. In the Online Preview I can see the logo and Legal address. But in the print preview , i am not able to see them. It just shows a blank space. Any Idea?
Thanks in advance

Omniportlet problems using web page as data source

When trying to set up an omniportlet using a web page as a data source
I get as far as defining the sectioning and scraping parts of the web clipping process.
When going on to the "filter" step of the process I always get an error message like:
Error
Failed to open specified URL. Check the following:
is the URL is active; is there a valid proxy setting or,
if HTTP authentication is required, check user name and password.
[http://oslap03.agra.int:7777/portalTools/webClipping/webData/omniPortlet/wcserver/jsp/show.jsp?_orawcs_providerId=39337338&_orawcs_portletId=1&_orawcs_p
ortletInstanceId=33731_OMNIPORTLET_39337338&_orawcs_userI
d=-&_orawcs_responseType=rowsetRow]
We are not using proxy servers for accessing external web pages in other cases
(so I wouldn't think we needed to now either), and this even happens for web
pages residing within our own network.
Any tips are much appreciated.

Please provide support for the above request.
It appears that Oracle 10g reports doesn't support Web Service as pluggable data source. Is this option is available in Oracle 11g Reports or Oracle Discoverer Or OBIEE?

Problem on delete from hsodbc data source

Hello every body
I configured an hsodbc data souce on a dbase IV data files.
All DML select, insert and update operations are done correctly.
But when deleting a row it is said to be deleted (message one row deleted is sent back) , but if i make a new select on that row i find it again in the table.
Does any body have an idea about the issue.
Best Regards

Hi,
I am having the same problem. Do you have a solution yet?
It would help me a lot too.
Thx,
Jos

Problem setting up Weblogic's data source for oracle

 Hi!
 I am trying to setup XA DataSource Pool for Oracle using Weblogic's driver. App-Server
 throws exception during startup.
 config.xml setting are appended with this posting.
 Can somebody help me identifying the problem?
 Thanks,
 Vinay
 <JDBCConnectionPool
 Name="WL_XA_1_Pool"
 Targets="examplesServer"
 CapacityIncrement="1"
 DriverName="weblogic.jdbc.oci.xa.XADataSource"
 InitialCapacity="1"
 JDBCXADebugLevel="1"
 MaxCapacity="5"
 Properties="user=vinay;password=vinay;dataSourceName=WL_XA_1_Pool;serverName=pqasun1"
 RefreshMinutes="0"
 ShrinkPeriodMinutes="15"
 ShrinkingEnabled="true"
 TestConnectionsOnRelease="false"
 TestConnectionsOnReserve="false"
 URL="jdbc:oracle:oci8:@PlatformTest"
 />
 [error_wl2.txt]


 Hi Dinu,
 Silversword is our upcoming maintenance release for WLS 6.0, and
 should be available in June timeframe.
 If you are only using 1 database instance, you can use Oracle's
 driver in non-XA mode in distributed transactions. Please refer
 to "Configuring non-XA JDBC drivers" section for details: http://e-docs.bea.com/wls/docs60/adminguide/managetx.html#1045803.
 -- Priscilla Fung, BEA Systems, Inc.
 "Dinu Ramanthara" <[email protected]> wrote:
 >
 >Hi,
 > What is Silversword?
 >
 > I need to use Oracle's Driver as I have to use Oracle
 >AQ and Oracle
 >AQ doesn't seem to work with jDriver. All my database
 >activity,
 >through AQ as well as through JDBC are restricted to the
 >same Oracle
 >instance. Given that what are my options? Should I use
 >Oracle 8.1.6
 >drivers or should I use 8.1.7 drivers.
 >
 >Is there a document/sample code illustrating what need
 >to be done
 >to bind Oracle's XADataSource to the JNDI tree.
 >
 >Regards,
 >Dinu
 >"Priscilla Fung" <[email protected]> wrote:
 >>
 >>Hi Vinay,
 >>
 >>A couple of things to note. Oracle 8.1.6's driver has
 >>a bug that
 >>does not accept foreign Xid, and thus cannot be used
 >with
 >>any 3rd
 >>party vendor's Tranaction Manager, including WLS. Oracle
 >>8.1.7's
 >>driver has fixed this problem, but they have threading
 >>issues.
 >> We have worked around the threading issues in Silversword,
 >>but
 >>not in WLS 6.0 release. For now, the only Oracle XA
 >driver
 >>we
 >>recommend is Weblogic's jDriver for Oracle.
 >>
 >>-- Priscilla Fung, BEA Systems, Inc.
 >>
 >>
 >>"Vinay" <[email protected]> wrote:
 >>>
 >>>
 >>>
 >>>
 >>>Hi!
 >>>
 >>>I am trying to setup XA DataSource Pool for Oracle using
 >>>Weblogic's driver. App-Server
 >>>throws exception during startup.
 >>>config.xml setting are appended with this posting.
 >>>
 >>>Can somebody help me identifying the problem?
 >>>
 >>>Thanks,
 >>>
 >>>Vinay
 >>>
 >>>
 >>>
 >>>
 >>> <JDBCConnectionPool
 >>> Name="WL_XA_1_Pool"
 >>> Targets="examplesServer"
 >>> CapacityIncrement="1"
 >>> DriverName="weblogic.jdbc.oci.xa.XADataSource"
 >>> InitialCapacity="1"
 >>> JDBCXADebugLevel="1"
 >>> MaxCapacity="5"
 >>> Properties="user=vinay;password=vinay;dataSourceName=WL_XA_1_Pool;serverName=pqasun1"
 >>> RefreshMinutes="0"
 >>> ShrinkPeriodMinutes="15"
 >>> ShrinkingEnabled="true"
 >>> TestConnectionsOnRelease="false"
 >>> TestConnectionsOnReserve="false"
 >>> URL="jdbc:oracle:oci8:@PlatformTest"
 >>> />
 >>>
 >>
 >

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Problem during the setting the query data source name in forms 6i

We are now doing assignments in forms 6i actually there is a problem during setting the query data source name in run time.
The problem is
declare
v_query varchar2(200),
begin
v_query :='(select empno,ename,deptno from emp where hiredate =' || control .value1 ||')';
go_block('emp');
set_block_property('emp',query_data_source_name,v_query);
end;
that bolded area is the problem that ia varchar value the single qoutes embedded with that value.how can i embedded single qoutes in that concatenation.
That is now query will run like select empno,ename,deptno from emp where hiredate =control.value
But we need like select empno,ename,deptno from emp where hiredate ='control.value'
Message was edited by:
Punithavel

Thanks for your response
We fixed the error
and the answer is
declare
v_query varchar2(200),
begin
v_query :='(select empno,ename,deptno from emp where hiredate = ' ' ' || control .value1 ||' ' ' ) ' ;
go_block('emp');
set_block_property('emp',query_data_source_name,v_query);
end;

Excel-2007 cannot connect to Oracle ODBC data source, Control Panel can.


I cannot make an ODBC connection from Exce-2007 to Oracle work. I am an expert Excel and VBA user (since 1994) and I have frequently used Excel to access ODBC databases, including Oracle (I have done this with Excel-2003 both with worksheet queries and have written VBA ADO-connection routines). And even though in Excel-2007 a worksheet ODBC query is supposed to be easier to create than in previous version of Excel, my connection fails. Any suggestions and all help are welcome and much appreciated.
DETAILS


1) What is my system? I am using Excel-2007 on Windows Vista x64 and Oracle server v.11g on my computer (all this is on my computer, no network issues).
2) Why use Excel with Oracle at all? I use Excel-2007 to access Oracle rather than Access-2007 (or any other application like TOAD, etc.) because I do engineering calculations with the data stored in Oracle. These calculations are easier done in Excel (I suppose that one alternative to this could be to use some sql or Access to get the data from the database, then store it as plain vanilla CSV file, then open this file in Excel, then do the math (the math involves complex optimisation algorithms), then save the results as CSV, then use some sql or Access to put the data back into the database. Howwever this does not strike me as a quick or neat solution. And after all Excel has been designed to access ODBC databases, so why not use it?)
3) What do I do in Excel-2007 that won't work? I create an ODBC link to Oracle that does not work. In Excel-2007 this is straightforward:

<ul>
<li>define an ODBC connection (Data tab --> From other sources --> From data connection wizard);</li>
<li>define a query on the worksheet -- that's it, this is all!</li>
</ul>

I start with creating an ODBC connection:
a) I choose an ODBC data source type: ODBC DSN
b) Excel-2007 displays the list of the available ODBC data sources. I see in it my Oracle database name and I select it.
c) Excel-2007 displays the Data Link Properties:
- the "Provider" has a list of the OLE DB drivers with preselected "Microsoft OLE DB Provider for ODBC Drivers". I keep this default selection.
- the "Connection" tab has a connection string "DSN=<my database name>" which I keep, it also has fields for the user name and the password, which I fill with the correct credentials.
- Finally there is a button "Test Connection", which when I click produces the following error message:
"Test connection failed because of an error in initializing provider. 
Unespecified error"

4) Additional food for thought:
a) In the above walk-through the only data, which I type, are the user name and password, everything else is selected from lists offered by Excel-2007, hence any possibility of typos being the cause of the problem can safely be discarded.
b) I can test the ODBC driver in the Control Panel and it shows that it can connect to the Oracle database:
- in Control Panel --> Admin Tools --> Data Sources (ODBC) on the "User DSN" tab I can see the list of the available ODBC data sources (same list as in Excel-2007, point 3b above) with the name of my database in it;
- selecting the name of my database from the list of the sources and clicking "Configure" button opens a tab with Data Source Name (same as in Excel-2007), TNS Service Name and User ID. I enter <user name>/<password> and click "Test Connection" button. A message "Connection successful" appears (just for a test I enter incorrect user credentials and "Unable to connect" message appears)
BOTTOM LINE


The procedure for using an ODBC connection from Excel is very simple, in the past I have created and used such connections numerous times with Excel-2003 and earlier on Win-XP and earlier. But now on Excel-2007 and Vista-x64 I cannot make it work.
Also, testing an ODBC connection driver is really easy and simple to be done in the Control Panel. There testing the same ODBC connection, which fails in Excel-2007, results in success.
I am frustrated by the simplicity of the problem and yet the persistant error. I have lost now two full days in failed attempts to make the simple procedure work and in searching the internet for answers.
All help is highly appreciated <img class="emoticon" src="images/emoticons/happy.gif" border="0" alt="" width="16" height="16" />,
Plamen


Did you find the solution to your problem?
If not, I think I may know.
Excel 2007 is a 32-bit application.
When installing 32-bit applications in a 64-bit environment, the "default" location is:
C:\Program files (x86)\...
Excel then launches from this location.
However, when it connects to Oracle and passes the name of the calling program, Oracle attempts to "interpret" the value of (x86) as if
the value within the parenthesis are being passed as a reference. Of course, iOracle doesn't find anything, so the result is (),
and then it cannot return the connection info back to the calling application.
I corrected it by installing Excel in C:\Program Files\, and once launched from that location, it works the same as on the 32-bit machines.
However, at my location, they are FORCING Excel to be installed in the(x86) location.
What I'm trying to discover now is:
Is it possible to flag Oracle to NOT process the embedded variables?
Or, is it possible to assign a variable in Oracle such that x86 = "(x86)", so that the end result is viable?
Have you had any luck with your installation?
thanks,
Paul

11i EBS XML Publisher Report with Multiple Data Source

I need to create XML Publisher report in 11i EBS pulling data from another 10.7 EBS Instance as well as 11i EBS in single report.
I am not allowed to create extract or use db links.
My problem is how to create Data Source Connection using Java Concurrent Program.
The approach I am trying is
1. create Java concurrent program to establish connection to 10.7 instance.
2. Will write the SQL queries in Data Tempalete with 2 Data Source 1 for 11i EBS and 2 for 10.7 EBS
3. Template will show the data from both query in 1 report..
Is there any other way to proceed using datasource API...
thanks

option1:
The query should be same @ detail level, only the template has to be different for summary and details.
@runtime, user can choose to see the detail/summary
Disadvantage, if the data is huge,
advantage , only one report.
option2:
create two separate reports summary and details
and create diff data and diff layout and keep it as different report
Advantage, query will perform based on the user run report, summary/detail, so that you can write efficient query.
Dis advantage , two reports query/template to be maintained.

Create Report with CR4E and XML Data Source

Hi all,
I have a problem when create a report with CR4E that should use a XML data source. It is not possible to choose fields from the field explorer, because ther are no fields from the XML-file. Is there a general problem when using an ODA data source in CR4E? At the moment I can only create reports with a database as data source.
Please help me with a tip.
Thanks
Arnold

Hi,
After Installing CR4E Version 2 the code snippet for creating a XML-report not works as JSP. Has anywhere a hint to resolve the problem or a complete JSP-file?
reportClientDocument = new ReportClientDocument();
java.lang.NoClassDefFoundError: com/crystaldecisions/reports/common/data/CrystalResultSet
 com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.<init>(Unknown Source)
 org.apache.jsp.XMLDataSource_jsp._jspService(XMLDataSource_jsp.java:64)
 org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:331)
 org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
 org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
Thanks
Arnold Meier

Problem to choose SLD as DATA Source on SMSY.

Similar Messages

Maybe you are looking for