Problem to config :Hyperion EPM system configuratior 11.1.1.3

Hi All,
I installed all the components 11.1.1.3
In Foundation service->EPM system configurator->second screen
I gave oracle database information to config the shared service and registry database configuration and some tables are created in the database after that it is not going to next screen..
The screen shows it is in processing more that 1 hour.....I am not able to proceed...
Kindly advice me on this.
I can able to connected the database thorugh sqlplus which I gave above.
What may be the issue? or any one did config through Fountation service in 11.1.1.3 version.

Hello everyone,
I am encountering the same issue as depicted within initial post: when starting with the configuration of EPM product I am stuck at screen 'Shared services and registry database configuration': after the different fields are filled in (Database Type, Server, Port, Service Name or SID, Username, Password) I hit the button 'Next'.
Then the configuration is running for ages (more than a couple of hours) but is going nowhere.
For your information here is the context:
- OS: Windows Vista Enterprise Edition
- Database: Oracle Express 10g
Installation scope: Hyperion Planning
When browsing into the C:\Hyperion\logs\config folder I notice that some log files exist but were created the day before so no new files recently updated here.
When having a look into the EPM System Configurator CMD window I can see a few error messages like:
- java.io.FileNotFoundException: ..\..\..\logs\config\configtool_err.log (Access is denied)
- java.io.FileNotFoundException: ..\..\..\logs\config\cmc-config.log (Access is denied)
- java.io.FileNotFoundException: C:\Hyperion\logs\registry\registry.log (Access is denied)
This probably explains the reason why I am not able to see anything in the log file (if they can not be accessed) but I do not understand why the are not accessible since I have full access rights (did a left click and >properties>securities and made sure that the administror had all possible rights).
Any input warmly appreciated.
Thomas

Similar Messages

EPM System Installer Prerequisites, 11.1.1.1

hello,
I am starting to install version 11.
The Hyperion EPM System Installer Prerequisites shows an error on the first installer screen:
"Hostname resolved to an IP address".
Did anyone face this error?
I´ve checked the help button and found following tip:
"If you are using a hosts file to resolve your hostname, the host name resolves to the first entry in your hosts file. To prevent potential communication problems in a distributed environment, make sure that the first entry in your hosts file is the machine's fully qualified domain name so that the fully qualified name is stored in the Shared Services Registry."
How can I resolve this issue on my virtuell mashine?
OS:Windows Server 2003, EPM 11.1.1.1, SQL Server 2005
thank you and regards

We've seen this as well - and the web client is not supported in IE 9 - it's only supported in: Internet Explorer 6.0, , Internet Explorer 7.x, Internet Explorer 8.x, and Firefox 2.0.x.
Considering that IE 9 is being pushed out as an automatically selected important update and Firefox is up to v4.x (Firefox 2.0.x is not even supported anymore), this has already caused us a huge headache.

Hyperion EPM 11.1.2 Planning Configuration Issue

Hello,
I am experiencing a bit of a problem when attempting to configure Hyperion EPM 11.1.2.
Envrionment: Windows Server 2003 R2 64-bit, Oracle 11g
Issue: Configuration abruptly fails during after the configure database screen for additional EPM products. Upon further digging I found the following error message:
log4j:WARN Please initialize the log4j system properly.*
Exception in thread "Thread-26" java.lang.UnsatisfiedLinkError: D:\oracle\Middl*
ware\EPMSystem11R1\common\config\11.1.2.0\NativeCall.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform*
I am pretty much at a loss at this moment. I downloaded the 64-bit zip files from edelivery and the install appeared to run successfully. I have tried the big bang approach to configuring and the modular approach, but can't seem to move past this. Has anyone encountered this issue before? Any assistance would be greatly appreciated.
Thank you.
Corey

Hi Corey, that error it is shown because java is trying to open a 32bit .dll file using a 64 bits library.
to resolve this issue you have to navigate to HYPERIONHOME\common\config
modify the bat file setJavaRunTime.bat and comment the 64 bits java options like this:
REM Get JRE or JDK
REM if exist "%HYPERION_HOME%\common\JRE-AMD64\Sun\1.5.0" goto okSetJREAMD64_150
REM if exist "%HYPERION_HOME%\common\JRE-IA64\Sun\1.5.0" goto okSetJRE64_150
REM if exist "%HYPERION_HOME%\common\JDK-IA64\Sun\1.4.2" goto okSetJDK64_142
REM if exist "%HYPERION_HOME%\common\JRE-IA64\Sun\1.4.2" goto okSetJRE64_142
if exist "%HYPERION_HOME%\common\JRE\Sun\1.5.0" goto okSetJRE150
if exist "%HYPERION_HOME%\common\JDK\Sun\1.4.2" goto okSetJDK142
if exist "%HYPERION_HOME%\common\JRE\Sun\1.4.2" goto okSetJRE142
then run the config utility again it will works. regards
Lucio.

EPM System Configurator runs for hours

Hi experts.
Have you ever experienced that your EPM system configurator runs for hours?
I have an 11.1.2.1 installation, and a few months ago, I applied a Reporting & Analysis patch which requires a redeploy of FR, framework and web analysis.
The redeployment took more than 1 hour 20 minutes when it usually takes around 10 minutes.
( Dec 18, 2012 12:24:15 PM ): ---- Hyperion Foundation Configuration......
( Dec 18, 2012 12:24:15 PM ): Pass [00 min 31 sec] [PRE] Pre-Configuration Total time passed: 00 min 31 sec
( Dec 18, 2012 12:24:26 PM ): ---- Reporting and Analysis Configuration......
( Dec 18, 2012 12:24:27 PM ): Pass [00 min 11 sec] [PRE] Pre-Configuration Total time passed: 00 min 11 sec
( Dec 18, 2012 12:24:37 PM ): ---- Financial Reporting Configuration......
( Dec 18, 2012 12:24:38 PM ): Pass [00 min 11 sec] [PRE] Pre-Configuration Total time passed: 00 min 11 sec
( Dec 18, 2012 1:46:28 PM ): ---- Reporting and Analysis Configuration......
( Dec 18, 2012 1:46:28 PM ): Pass [01 h 21 min 50 sec] [APP] Deploy to Application Server
( Dec 18, 2012 1:46:28 PM ): Pass [00 min 00 sec] [APP] Deploy to Application Server Total time passed: 01 h 21 min 50 sec
( Dec 18, 2012 1:46:28 PM ): ---- Financial Reporting Configuration......
( Dec 18, 2012 1:46:28 PM ): Pass [00 min 00 sec] [APP] Deploy to Application Server Total config time: 01 h 22 min 47 sec
I checked the CPU and memory log at the time of the deployment, things seem to be normal.
Since i will be applying another patch on Reporting & Analysis soon, I am preparing the work plan and rundowns and I am trying to estimate how much time I need to do this patch.
Any advice would be appreciated.
I did some researches on my own and found out some article saying the following:
http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-73-up-399995.pdf
On page 103, it says something about the cluster or IPv6 problem. I don't think the IPv6 is our problem, and I couldn't find the log inside of my configtool log.
Thank you.

If it only happened once and then all the other occasions it was fine then what is to say it will happen again? I am not sure how easily you are going to find your answer to why it happened on that occasion, I know I was deploying a web application the other day and it took 30 mins when it should only take a few but this was on a shared vm infrastructure which could have been the cause.
Cheers
John
http://john-goodwin.blogspot.com/

11.1.2.3 Essbase Admin Server stopped ??? where is the EPM System Registry located

Whereis the Location of the EPM System Registry !!!!
I have complete the .3 install and config of essbase and Planning completely set planing, made a snapshot of my VMware system and shut down the server
this morning logon to my Laptop Started EPM system
and now my Essbase Administation Server
EPM System Registry configuration.r / Localhost:900 = Stopped
I Restarted my EPMSystem then
stop and started Essbase Administation Server
but it is stated it was stopped
went to
Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase/Essbase
[Wed Jan 08 06:39:17 2014]Local/ESSBASE0///6996/Error(1051683)
Attempt to retrieve connection information from the registry failed. Please check reg.properties file and try again.
and
COracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase/Essbase_odl
[2014-01-08T06:39:17.203-05:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
LOOK AS IF THERE IS A ISSUE WITH THE EPM System Registry
Oracle EPM System
Diagnostics
everything Failed ??
Hyperion Foundation
FAILED Audit Validating that Audit has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED CES Validating that CES has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Web Server: Pending
Configure Database: Pending
Configure: Pending
Configure Common Settings: Pending
Configure Oracle Configuration Manager: Pending
0 seconds
FAILED CSS Validating that CSS has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED EXT: External Authentication Checker execution failed.
Error: EPMCSS-00000: Failed to process request. Internal server error. Refer EPM Shared Services Security log file for related errors.
Recommended Action: Refer to the validation logs for exception details.
8 seconds
FAILED HUB Validating that HUB has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
PASSED WEB: Permissions All HIT entries are present in system-jazn-data.xml
0 seconds
FAILED LCM Validating that LCM has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED Single Sign-On Checker execution failed.
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
2 seconds
FAILED LNK: Registry Checking that all components in the registry have a link to host
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
0 seconds
PASSED CFG: Environment Checking whether system path variable length exceeds 2,000
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component SHARED_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED Registry Validating that Registry has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
EPM System Registry
Essbase / Essbase
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Server: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Administration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_ADMINISTRATION_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Integration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Integration Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_INTEGRATION_SERVER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Studio
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_STUDIO_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Provider Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Calculation Manager
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component CALC_MANAGER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Performance Management Architect
FAILED AppMgrLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error: AppMgrLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Create EPMA Virtual Directory: Pending
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED DimEditorLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf
Error: DimEditorLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED EnumApplications Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications
Error: EnumApplications failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED EnumDataSyncs Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs
Error: EnumDataSyncs failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED EnumDimensions Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions
Error: EnumDimensions failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED PMAJ: EPMA Service Validating whether jobmanager service is available.
Error: EPMVLD-01006: The EPMA service is not available. Check the log files for details.
Recommended Action: Check that the server is running.
0 seconds
FAILED DSC: EPMA DimensionServer Server Configuration Validating EPMA Dimension Server hyperion-bpma-server startup... Failed...
Error: Dimension server was not found in Shared Services Registry.
Recommended Action: Check application is started.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component EPMA_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Workspace
PASSED CFG: Configuration Validating that configuration tasks have been completed
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component WORKSPACE was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
PASSED REG: Registry All links are present in the registry.
0 seconds
Planning
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component PLANNING_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Test start time: 01/08/2014 07:07 AM
Test end time: 01/08/2014 07:08 AM
Total test duration: 87 seconds
Please advise
Thanks

John it happen again
so i look at the Oracle Database Instance and it is up ?????
Database Instance: ORCL
Page RefreshedJan 9, 2014 3:18:20 PM ESTView DataManuallyAutomatically (15 sec)Automatically (60 sec)
General
Status Up
Up Since Jan 9, 2014 1:18:26 PM EST
Instance Name orcl
Version 11.2.0.1.0
Host localhost
Listener LISTENER_localhost
Please advise

Restarting order for epm systems in distributed environment

hello everone ,
Q. 1 can I know safe restarting order for epm systems in distributed environment where I have 7 servers which have different epm applications.
and in which order i should start services ?
version is hyperion 11.1.2.1
Q. 2 also I am getting this error while refreshing database from planning application.
com.hyperion.planning.olap.EssbaseException: Network error [%s]: Cannot Receive Data (1042013)
this error came on 16th step. any hints on this , how to overcome this error ?
regards,
dinesh

For 11.1.2.1 start order check - Summary List of Services and Processes
Check the essbase logs for the reason behind the refresh problem.
Cheers
John

Installing Hyperion EPM error: Register with Shared Services

I cannot configure correctly my installation of Hyperion EPM 11.1.1. (I0m using Oracle AS 10.1.3 as application server)
If I try automatic deployment it fails in "Register with shared services" for all the services I'm trying to install.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:981)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:1070)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:1070)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:1088)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:1088)
at com.oracle.cmc.registry.HITRegistryUtil.loadHITRegistry(HITRegistryUt
il.java:692)
at com.hyperion.avalanche.AvalancheConfigurator.configureWorkspaceServic
es(AvalancheConfigurator.java:365)
at com.hyperion.avalanche.AvalancheConfigurator.configure(AvalancheConfi
gurator.java:159)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfi
gTask(RunAllTasksWizardAction.java:658)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAll
TasksWizardAction.java:202)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source
Caused by: java.sql.SQLException: [Hyperion][Oracle JDBC Driver]Object has been
closed.
at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
at hyperion.jdbc.base.BaseConnection.prepareStatement(Unknown Source)
at hyperion.jdbc.base.BaseConnection.prepareStatement(Unknown Source)
at com.oracle.cmc.registry.CMCPortalServiceDBHelper.generateServiceName(
CMCPortalServiceDBHelper.java:293)
at com.oracle.cmc.registry.HITRegistryUtil.generateAgentUuid(HITRegistry
Util.java:1329)
... 15 more
HYPERION_HOME: E:\Hyperion
HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
ConfigurationManager not available
If I Validate at the end of the configuration:
PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
PASSED DB: Database Connection to database jdbc:hyperion:oracle://sinfo-vmn-05:1521;ServiceName=bilab 6 s
FAILED EXT: External Authentication Check Native Directory external authentication provider configuration
Error: Provider is not reachable
Recommended Action: Check Shared Services Configuration 69 s
FAILED OpenLDAP Connection to OpenLDAP
Error: sinfo-lab-hyp:28089
Recommended Action: Start open LDAP 1 s
FAILED SSO Availability of login http://sinfo-lab-hyp:19000/interop/index.jsp
Error: java.net.ConnectException: Connection refused: connect
Recommended Action: Start application 0 s
FAILED WEB: Web App Availability of web application context http://sinfo-lab-hyp:19000/interop/META-INF/manifest.mf
Error: Connection refused: connect
Recommended Action: Start application 1 s
Essbase / Essbase
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Recommended Action: Try to configure mentioned tasks 0 s
PASSED EAS: Essbase server Essbase Server startup on 0 s
PASSED EAS: Essbase server Essbase Server startup check using Maxl command 0 s
Essbase / Essbase Administration Services
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Recommended Action: Try to configure mentioned tasks 0 s
PASSED DB: Database Connection to database jdbc:hyperion:oracle://sinfo-vmn-05:1521;ServiceName=bilab 6 s
FAILED WEB: Web App Availability of web application context http://sinfo-lab-hyp:10080/eas/META-INF/manifest.mf
Error: Connection refused: connect
Recommended Action: Start application
I see that OpenLDAP is not configured. Is this a problem?
If I try with Embedded Java Container, Will I resolve my problem??

hi, this is a late reply.
I encountered the same problems as yours. I then read the releasenotes(for windows) of EPM and found this:
Could not start the Shared Services from Windows services.
solution: update Windows registry
1. locate the following item of windows registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion
Solutions\FoundationServices0\HyS9FoundationServices
2. Under HyS9FoundationServices, add 1 to JVMOptionCount, and add a new JVMoption, whose value is set to be -DEPMRegistryUpdate=true。
3. restart the Shared Services server from Windows services.
It does work (for me). Hope this helps.
Best regards.

Hyperion EPM Architech-Process Manager will not Start

Hello-
On April 1st we had some issues with a re-deployment of an application and Oracle Support told us to change Deployment_Pending_Timeout config from 8 hours to 4 min. Then we tried to restart the Hyperion EPM Architech-Process Manager task on the server and it would not restart. Below are the error message we recieved in Event Viewer. We worked with Oracle Support all last week and they finally suggested we install Patch 9535372 to fix out issue. So we installed patch and it did NOT fix our issue.
Error Message 1
Service cannot be started. System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at Hyperion.DimensionServer.ProcessManager.ProcessManager.StartNetJNIBridge()
at Hyperion.DimensionServer.ProcessManager.ProcessManager.Initialize()
at Hyperion.DimensionServer.ProcessManager.Service.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at
Error Message 2
Engine Startup] FATAL An error occurred during initialization of engine ID 1: Object reference not set to an instance of an object..System.NullReferenceException: Object reference not set to an instance of an object.
at Hyperion.DimensionServer.RelationshipMemberList.Add(RelationshipMember item)
at Hyperion.DimensionServer.Dimension.<LoadSharedMembers>b__11(RelationshipRecord relationship)
at Hyperion.DataAccessLayerCore.DALRowset`1.Read()
at Hyperion.DataAccessLayerCore.DALRowset`1.Execute()
at Hyperion.DataAccessLayerCore.SelectCommand`1.Execute(Action`1 callback)
at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback, SetParamsEvent`1 onSetParams)
1. I was wondering if you have seen this error before and what the result is?
2. Also have you heard of anyone istalling Patch 9535372 and what issues it resolved?
I appreciate your help!
Thanks

Hi,
Something appearently went wrong in EPMA database and unfortunately this is not something extraordinarily unusual in EPMA world. If you have a reliable backup dated just before 1st of April, I would advise to restore it back. Otherwise, you have to dive into the dark tunnels of EPMA tables which I would not recommend quiet highly.
Cheers,
Alp

Hyperion EPM Architect Services not starting

Hi All,
We have installed Oracle Hyperion 11.1.1.1. We are using Sql 2005 as RDBMS. The problem that I am facing is that Hyperion EPM Architect services are not starting. For Hyperion EPM Architect - Process Manager I am getting the following error in the event viewer:
Event Type:     Error
Event Source:     HyS9BPMA_ProcessManager
Event Category:     None
Event ID:     0
Description:
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database connectivity could not be established. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boo...
It looks like that Sql Server 2005 is refusing connection. I checked 'Allow remote connections' property for sql 2005 and it is enabled. Any help would be appreciated.
Thanks in advance,
Amol

Hi,
Yeah the Sql Server 2005 is running on the same server
Hyperion Foundation
PASSED Configuration Check whether all configuration tasks have been completed 0 s
FAILED Database Connection to database
Error: java.net.UnknownHostException: VPC-W3K\HYPERIONEPM: VPC-W3K\HYPERIONEPM
Recommended Action: 0 s
Financial Management
FAILED Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
clusterRegister: Configuration Failed
Recommended Action: Try to configure mentioned tasks 0 s
FAILED HFM Application Server Configuration HFM Application Server failed...
Error: Error Configure Application server
Recommended Action: Check application is started 204 s
FAILED HFM WebServer HFMWebServer startup... failed...
Error: java.net.ConnectException: Connection refused: connect
Recommended Action: Check application is started 204 s
FAILED LCMServer LCMServer startup failed...
Error: java.net.ConnectException: Connection refused: connect
Recommended Action: Check application is started 204 s
FAILED SmartViewServer SmartView WebServer startup failed...
Error: java.net.ConnectException: Connection refused: connect
Recommended Action: Check application is started 0 s
Foundation / Performance Management Architect
FAILED EPMA DimensionServer Server Configuration EPMADimensionServer startup... failed...
Error: java.net.ConnectException: Connection refused: connect
Recommended Action: Check application is started 12 s
This is what I got from the diagnostic.
Regards,
AD

EPM system security is not initialized properly

Hi,
We are in the process of installing 11.1.2.2 on Windows 2008 server.
Step 1. we installed Foundation Service, Reporting and FM
Step2. 1st did configuration of foundation service and Performance Management Architect
Result - Successful. Was able to login to workspace ans shared service
Step 3. 2nd we Configured Financial Management.
Configuration was successful.
All services are running but we are not able to login into workspace.
We are geting following error in log file of HyS9EPMServer
"EPM system security is not initialized properly"
Any help will be appreciated.
Edited by: user8638468 on Aug 15, 2012 9:42 AM

Yes Vivek.
We did run Foundation Service --> Configure Web Server after configuring HFM module. It was susccessful.
After that we run "Start EPM System". Then everything stopped.
While installing HFM in 2nd leg on "Configure Database" screen we selected "Perform first-time configuration of database".
Entered username HFM.
We noticed that after installation EPMSystemRegistry-jdbc got changed.
Path is C:\Oracle\Middleware\user_projects\domains\EPMSystem\config\jdbc\EPMSystemRegistry-jdbc.xml
<value>HSS</value> got changed to <value>HFM</value>
I are not sure but I think we should have selected "Connect to a previously configured database".
I am going to install it again and will update the forum.
-Devidas

EPM System Configurator Error

Hi,
I am trying to open EPM System Configurator but getting error:
"The Vital Product Data registry is in use by another installer. Please start this installer after the other installtion is complete."
I am not installing the EPM system. It is already installed. I am just trying to open EPM System Configurator by Start--All Programs--EPM System--Foundation Services-- Start EPM System Configurator
I am not running any othe installer. I tried restarting the system also but again I am getting the same error.
Please help me with this error.
Thanks & Regards,
Akshat

Hi Srikanth,
I am not running any othe installer. I tried restarting the system also but again I am getting the same error.
Actually I am trying to integrate OBIEE with EPM workspace.
I am following the below link:
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10416/general_10134.htm?bcsi_scan_6E125C62D30562F9=0&bcsi_scan_filename=general_10134.htm#BEHGEFEI
I am facing the problem at step -- 11.5.3.6 Configuring the Web Server for EPM Workspace
Regards,
Akshat
Edited by: user10943765 on Oct 1, 2010 10:57 PM

Weblogic 9.2 MP3 Issue with EPM System 11.1.1.3

Hi,
I am currently running into issues when trying to configure Shared Services via the EPM System Configurator 11.1.1.3. I've installed Weblogic 9.3 MP3 with all of the default options (including establishing Node Manager as a service). I've also created a seperate userId in Weblogic called hyperion (with the password of hyperion) so that EPM can access the instance against the default web server.
When I run the configurator to try and deploy to application server, the status sits there on the "Starting WebLogic 9 Admin Servers" and does nothing.
Sometimes is does get past that but then the deployment fails because it is unable to deply the interop.war.
Any help would be greatly appreciated as I'm 100% stuck!
Thanks,
Anju

The Hyperion EPM forum is here:
Hyperion EPM
You'll probably have better luck there.

Can We Install Hyperion EPM in 64 bit machine with windows8?

Hi Gurus,
Can We Install Hyperion EPM in 64 bit machine with windows8?

There is 64 windows versions available in edelivery - "Oracle Enterprise Performance Management System (11.1.2.2.0) Media Pack for Microsoft Windows x64 (64-bit)"
Cheers
John
http://john-goodwin.blogspot.com/

EPM System 11.1.2.3

My name is Ted < personal information removed by moderator so that you don't get harvested by identity thieves ad infinitum >
Currently, we are in the process of upgrading our Hyperion System 9.3.3 environment to EPM System 11.1.2.3.
I am attempting to contact to users who are upgrading to System 11.1.2.3. My goal is to share our experience and exchange information with other users going thru the same upgrade. The products we use today are HFM, Planning/Essbase, FDM, Financial Reporting, SmartView, and WebAnalysis.
If you interested, please give me your name and email address and I will contact you.
Thank you,
Ted Hunkeler

Ted,
This web site is a Cummunity discussion forum for technical matters dealing with products and service from and by Oracle Corporation. It is a public forum.
Requests for and expectations for contact and communications outside the forums are specifically discouraged.
Review the site's FAQ and the Terms Of Use. Both of those are readily available as links on every forum page, both discuss the expectations for on-forum-only communication, and both are what you implicitly agreed to as conditions of registering to participate on the site.
Your post is locked to prevent others from spamming the forum with their contact information.

EPM System Configrator........

Dear Friend,
i have install Hyperion system 11.1.1.3 successful.But when i start the EPM system configrator it will show the following error:
The system cannot find the path specified.
"JAVA_HOME is not set"
"Exiting"
After that i'll set JAVA_HOME in the Environment variable
JAVA_HOME
C:\Program Files\Java\jre1.5.0_17\bin
After setting the environment variable run the system configrator again but now nothing is display.
Plz share your Exp. with me..

Hi Vikram,
1. Do you still see " java " folder .
2. I remember , there was one issue with initial versions of 11, where java folder use to disappear
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Problem to config :Hyperion EPM system configuratior 11.1.1.3

Similar Messages

Maybe you are looking for