Problem to confirm or not it IDOCReceiver transaction

Hi, good afternoon!
1 - Am using SAPIdocReceiver to receive IDOC's logical it SAP and is functioning, however necessary to confirm the act of receiving of the IDOC or not, in case that some error in the processing of the IDOC in my application .Net
2 - As I make to use the protecting methods CheckTransaction, CommitTransaction and Rollback Transaction
Thank you,
Danilo Santos de Oliveira

Hi brianhillman-
I would recommend reading this Support article on troubleshooting printing issues:
[[Firefox prints incorrectly]]
Hope that helps.

Similar Messages

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

Would be problems with purchases, billing, and redemption option. It's not 100% exact to your issue, but it will get you to the right department.
Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption. Then.. probably pick "My topic is not listed."

Problem in confirming quantity in sales order

Hi,
Quantities are not confiming in sales order after releasing the QM LOT by transaction QA16. Here the stock is posted to unrestricted stock but the table QALS is not updated accordingly which causes the problem in confirming the quantity in sales order.
Is there any scope of reversal of the QM lot so that further the lot can be released by QA32 or QA11.
Further when a lot is releaded the status of the lot is updated as the usage decision has been made. Where this status is stored?
Regards
Indranil

Hi,
Have yoou give the document category for quotation as B. Please try ginvg the same and run.
Thanks
Shiva

Can not commit distributed transaction

Hi
We get error "can not commit distributed transaction" during
commit the transaction in which we have create NEW entities.
Update-transactions on existing enitites work correct.
Our problem is probably due to seauences for object IDs: we are using oracle native sequences:
<sequence name="SeqErrRecObj" strategy="nontransactional" factory-class="native(Sequence=BUYING.SEQ_ERRRECOBJ)"/>
As soon we use strategy="nontransactional" in managed environment,
we get "can not commit distributed transaction" error by creating new instance.
Switching to strategy="transactional" seems to eleminate this problem.
I did not found any hint in about this in documentation.
Can some one confirm our assumption that using nontransactional oracle sequences in manageg (WebLogic 9.2) environment
is responsible for "can not commit distributed transaction" error and "strategy=transactional" is the right solution.
Probably we are completely wrong and tehre is some other explanation for this error ?
kind regards
Andre Teshler

Hi Andre,
It sounds like you have not configured a non-transactional datasource. See section "4.2.1. Managed and XA DataSources" in the <kodo>/docs/jdo/pdf/manual.pdf. Connection is for the managed datasource and Connection2 for the non-transactional.
David Ezzio

Workflow on confirmation is not routed to goods-receipient

Hi Guys,
We are implementing the shop on behalf (shop for) functionality. all functions are working fine , but we face a problem at the workflow for confirmation on goods&services.
We ceate a SC with the Shop for functionality (user1 shops for user2) and we specify that the goods receipient is user1. The workflow (WS1040002) always goes to the requestor of the shopping cart (User2) for confirmation and not to the Goodsreceipient (user1) in the shopping cart.
Acording to the documentation the workflow should lead to confirmation by the goodsreceipient.
Can anaybody help me out ?
Or can anybody tell me where the agents for this worklflow are determined, or does anybody have experience with this flow and can point us to right solution.
Thanks
Hubert Dieleman

Hi,
Who created the confirmation in your case ? It depends on creator_type,
Go to SWO1 transaction, Business Object BUS2203, Attributes ApproverList.
Set the cursor at ApproverList, then select program button. Go dive the line
695    PERFORM select_table_bbp_pds_header USING lv_subrc.
298 * 1) SC requestor is approving a good receipt created by recipient or
299 *    vendor.
309 * 2) manager of the requestor is approving CF created by the requestor
315 * 3) manager of the requestor is approving CF created by recipient or
316 *    vendor ( 2nd approval step)
376 * The WFLCreatorType is other than 'Requestor' (i.e. Vendor, Profi). In
377 * this case the confirmation must be approved by a requestor of shopping
378 * cart. Take the approver name from the lt_approver.
385 * The WFLCreatorType is a 'Requestor'. In this case the confirmation
386 * must be approved by the orgunit manager of the requestor.
Regards,
Masa

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!

fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

F1 help does not work in transaction SE80

Hi Experts!
A strange error occurred in our ECC 6.0 SR3 system (Windows 2003 SE 64 bit based, MaxDB 7.6.03.009). F1 help does not work in transaction SE80. Either nothing is shown when a keyword as SELECT is marked and F1 key is pressed, or a strange popup appears with title u201CABAP Keyword Documentationu201D and root u201CHit List of Index Searchu201D - [screenshot|http://i43.tinypic.com/aox7d.jpg]. No matter what I choose in the tree it always closes, no help is displayed and SAP GUI returns in the main screen in transaction SE80.
I found this thread [Re: SAP F1 Help and SE80 issue|Re: SAP F1 Help and SE80 issue] but it did not help me. This is my system information:
SAP PC VERSION INFORMATION: saplogon.exe
MAIN MODULE INFORMATION:
   saplogon.exe
   SAP Logon за Windows
   Final Release 710
   7100.3.12.1042
   1046700
SYSTEM INFORMATION:
   Operating system: Microsoft Windows XP 5.1 (2600) Service Pack 3
   Internet Explorer v. 7.0
Application help works perfect - I checked the configuration in transaction SR13 too.
Any ideas will be appreciated!
Thanks!

Hi Presu,
As it is seen from my previous post SAP GUI version is 7.10 SP 12. I downloaded the last SP 13 and installed it. Now SAP GUI information looks like this:
SAP PC VERSION INFORMATION: saplogon.exe
MAIN MODULE INFORMATION:
   saplogon.exe
   SAP Logon за Windows
   Final Release 710
   7100.3.13.1045
   1063164
The problem is not resolved.
This happens from different workstations with different versions and sub-versions of SAP GUI, so the problem is not caused from the GUI I think. It happens using different logon users and in all SAP system cliens.
Any other suggestions?
Best regards,
Pit

Aging in Ar not showing any transaction but its showing all the payments

Hi can anyone help in regard of this problem
when i am going to run 7bucket aging report in AR it doesn't showing any transaction but it shows only receipts.
even the transaction is due i don't know why its not showing any transaction
we have just get upgraded to 12 release.
Regards
Nishant

I am suspecting the Transaction is not stamped with Legal entity, since you mention you have recently upgraded to r12.
Just see the comment section at the end of this page, it will give you some idea about legal entity consideration for transaction.
http://www.oracleappshub.com/accounts-receivable/power-of-autoinvoice/
Check the status of all transactions, are they posted to GL. This cann't be a case..as receipt you are getting.

Portal buttons not working for transaction type iviews

Our buttons on our portal transaction programs quit working. We are currently on ecc6,ehp5, portal 7.02. The buttons still work on our test and production systems, so it's not a browser issue. The buttons work on the newer webdynpro programs in our dev portal. Please get back with me if you have any ideas on how to fix this button problem. Thanks, Mike

Hi Ajay,
Double posting
[ITS services not working for Transaction iview with gui for html -;
Thanks
Siva

IDOC Listener not calling BLS Transaction

All,
I am running xmii 11.5.4. I have a single IDOC Listener configured with a Routing Rule for Message Type = "PROCESS_MESS_DOWNLOAD". The Routing Rule is defined to trigger a BLS called "TEST_BLS". The Listener is configured with the BLS Input Parameter.
The Listener processes the incoming message by writing the XML file to the defined Path with no problems.
The issue is the BLS Transaction will not trigger. The Transaction has a single Transaction Property of data type XML with no default value defined.
I have tried using a simple Transaction with nothing but an Event Logger or XML Trace actions to verify the Transaction is being executed. But nothing occurs.
I have viewed the General Log and see no errors or warnings or fatal log entries.
The Transaction works fine manually from inside Logic Editor and even runs from a URL invokation.
Any ideas of what to look for or try would be greatly appreciated.
Thanks,
Chuck

Udayan,
The Transaction consists of only an Event Logger Action and an XML Tracer Action. Neither of these are apparently executing. No event is logged and no entry is made to the XML Tracer file. The Transaction has a Transaction Property defined as stated in my first post.
I have noticed through trial and error that the IDOC Listener only works with the asterick message type. The actual message type of the IDOC is evidently not being read by the Listener. The IDOC being created is coming from a PPPI Process Message. The first few lines are:
<?xml version="1.0" encoding="UTF-8"?>
<PROCESS_MESS_DOWNLOAD>
<INPUT>
<CLIENT>200</CLIENT>
</INPUT>
<TABLES>
<MSEL>
<item>
<MSID>100000000000000537</MSID>
Thanks,
Chuck

Balance sheet valuation not active (Customizing transaction OMWE)

Hi,
For FIFO Valuation, I have done the following SPRO setting:
1. Activate balance sheet valuation (Trans: OMWE) - as LIFO not relevant, FIFO active.
2. Defined LIFO/FIFO valuation levels (Trans: OMWL) - set as Plant (valuation area).
3. Configured FIFO Valuation areas for year 2008.
4. Define LIFO/FIFO method (Trans: OMWP) - FIFO01 as CUR u2013 current
5. No changes made to movements relevant to FIFO (Trans: OMW4);
While running the MRF1, the system is throwing the following message:
Balance sheet valuation not active (Customizing transaction OMWE)
Message no. MY043
Pls. help in rectifying the problem.
Pls. note that I have already activated the LIFO/FIFO-relevant Check box while creating the Material.
Do I need to execute MRF4 before executing MRF1?
Regards,

hey guys... can anyone help me to solve this issue....

Navigation is not possible as there is not any business transaction

Hi Gurus
I am using IC Web Client 5.0. When i clicked on sales order view in the ic web client Navigetion bar i have encountered with a problem.
"Error: Navigation is not possible as there is not any business transaction".
can anyone give me the solution for this error.
Thank u in adv
manju

Hi,
Check whether u have assigned ur transaction type in spro setting:
Customer Relationship Management>Interaction Center WebClient>Business Transactions-->Define Business Transaction Profiles.
Hereselect ur Business Transaction Profile and assign ur Dependent Business transaction.
Regards,
PePe

SAP Adapter has a problem, SOD violations will not be checked

Hi,
In our ides server whenever i click save button in su01 i get the following error ,
"SAP Adapter has a problem, SOD violations will not be checked !
Please check with your system Administrator
Technical Info:
Error when opening an RFC connection "
we didn't have this problem before . can anybody help me to resolve the issue
Also I am getting this error only if I click save in su01. in other t code. I don't get this error
Thanks in Advance
Edited by: gajula jhansi on Apr 11, 2011 11:28 AM

You need to restart your sap adapter in GRC front end from configurations tab-->Sap adapter >choose the one for your back end system> if it's grayed out or even green still, click on it and let it restart and turn green again.
Then you go back to your backend ECC system and in SM59 , choose the RFC connection for the Risk Terminator (the one you have saved in the Risk Terminator transaction /VIRSA/ZRTCNFG in backend system).. and test the connection. It should pass the connection test if your adapter is working and set up correctly. Then when you do save in SU01 or make changes in PFCG and have Risk Terminator activated for the backend system, it will check the SOD violations against those transactions from RAR front end.
If you don't want Risk Terminator to check for SOD violations in front end RAR, then you need to set your settings to 'NO' for all in the Risk Terminator transaction. You can get all this info in the GRC config guide for RAR and SPM area.
Regards,
Alley

Name not Found in Transaction TAB

In Solution Manager, Transactions Tab ,i have some Transactions without a
Name ( <Name not found> is in the Name column .   All custumized transactions
are in this condition.
I tried the option   Environment / Update Component System Texts. But no changed ocurred.
Only the Standards Transactions are Ok. The customized transactions appear with <Name not found>
BMTA Transaction     SAP ECC     MB21     Criar reserva
BMTA Transaction     SAP ECC     MB22     Modificar reserva
BMTA Transaction     SAP ECC     MB23     Exibir reserva
BMTA Transaction     SAP ECC     MB24     Reservation List
BMTA Transaction     SAP ECC     ZMM001     <Name not found>
                                                                                Can you help me?

Hi Paulo,
you might try the following to solve the problem:
1. In transaction SE38 start report RSCPINST.
2. Add the language required at the left side and activate the settings.
3. Afterwards refresh the buffer in SOLAR01 via menu Environment -> Update Component System Texts
4. Restart SOLAR01.
Best regards,
   Andreas

Order confirmation mail not received

My self Puneet Garg. I applied for Diwali utsav offer voucher redemption. Till today order confirmation email not received. My mobile no[Personal Information Removed]. I am waiting for the same so that I can send documents by post

Thank you for visiting the HP Support Forums. I'm sorry but this is a peer-to-peer community of HP customers, and not a venue to contact HP directly. Most of the users here are consumers like yourself who are offering solutions because they like to help others, and any HP employees you see are here on their own capacity and not representing the company.
If you have additional or direct feedback for HP about their products or services, or questions about repair, you can use the link below for contact information.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
OrnahP
HP Support Forums Moderator
Clicking the "Kudos Star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking "Accept as Solution" to help other members in the future!
Rules of Participation

Problem to confirm or not it IDOCReceiver transaction

Similar Messages

Maybe you are looking for