Problem to connect E 73 with home wireless

Hi there
I cant connect my E 73 with home wifi system, it always come up with the error messsage : J007 Incorrect Security Certificate.
Pls advise what to do. Thanks
allan

Hello,
I am currently using Oracle8i with Forms6i. Inorder to acheive this, follow the following procedures:
1. Install Oracle8i and Forms6i in two different homes.
2. Use Net8 config assistant from Forms6i home and set, the host name, oracle home and sid to that of Oracle8i's home.
3. That is all.
You are ready to use forms6i with oracle8i.
Jothiram
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Imran Naeem ([email protected]):
I installed Oracle8i and Form6i on Win2k. When ever I connect with the form builder it gives me an error. I want to modify my tnsnames.ora files and listiner.ora files in my Oracle_Home dir. When I run the lsnrctl it was successfully completed. I'm using system/manager and my host string is oracle8i. <HR></BLOCKQUOTE>
null

Similar Messages

Why can't i connect my ipad to home wireless?

why can't i connect my ipad to home wireless?

Is your iPad seeing the Router SSID (Network Name) in the list of networks? If so what happens when you try to select it? Are you asked for a password? If the network isn't secure then it won't ask you for a password and you should just connect.
Regards,
Steve

How can i connect iphone 5 with izon wireless camera?

Hi
How can i connect Iphone 5 with izon wireless camera.I have tryed everything.I try to restart this camera,but iphone can not find this izon.
What is wrong??????????

I would check if they have some info here
http://steminnovation.com/support
and then I would test it with other phones or a computer to verify that it's not broken

Problem connecting Nokia C3 to home wireless route...

Good day, Nokia!
I recently bought a Nokia C3-00 WiFi phone but I can't seem to browse my home wireless connection with it. The phone can detect and connect with the wireless network successfully but when I open my mobile browser, it can't load websites, saying "Service not available."
However, I can connect and browse the internet through other WiFi hotspots, just not my home connection. The router I'm using is LP-8616. It's an AP router, if that helps. Unfortunately, there's no firmware upgrade for this router anymore.
I've read all the threads about this problem here and all over the internet but still nothing works for me. Hope you or somebody here could help me to finally solve this problem. More Power!

Allsolution from another post, see /t5/Cseries/C3-wifi-problem-connect-to-wlan-but-internet-not-work/m-p/950115#M14517. Found out how to solve the problem of connecting via WLAN in the following way (the phone was able to connect to the Internet only through the GSM provider network):
Step 1: Menu> Settings> Configuration> Personal Settings> Add> Web or Streaming or any other (Just add, needs no other settings)
Step 2: Menu> Settings> Configuration> Default config. settings (choose MyWeb, Personal Settings or the name created at step 1)
Step 3: Menu> Settings> Configuration> Personal settings (delete the field created in step 1) then go to Menu> Settings> Configuration> Preferred access point (choose one of the available options)
Now you can open your browser and try to connect. It should ask what method you choose (WLAN or Access Point Preferred)
If your phone does not want to be connected via the GSM provider network, the user can manually enter settings for defining an Access Point (Step 4)
Step 4: Menu> Settings> Configuration> Personal Settings> Add> Access Point (check with GSM provider for account settings)
Step 5: Menu> Settings> Configuration> Preferred access point (select the field you created earlier)
I know that what I wrote above may seem like science fiction for a user who is not accustomed to butoneasca phone and non-stop, but I assure you that the operation should take no longer than 5 minutes.

TS1398 how do i configure so i phone connects with home wireless automatically? currently, it connects to prior owners wireless since disconnected.

how do i configure wifi so my Iphone connects w home wireless automatically?

Hi Tesserax
You could, but its benefits may depend on how you have it configured with the D-Link router. That is, do you have the TC directly connected to the D-Link by Ethernet or is it just wirelessly joining the D-Links' wireless network?
I have the TC connected via Ethernet cable.
I am assuming that you have the 802.11n AirPort Express Base Station (AXn) configured as a wireless client so that it can join the D-Link's wireless network for iTunes streaming ... correct? If so, then it would be performing like any other wireless client (desktop, laptop, printer, etc.) and will not interfere with the D-Link's wireless network.
I rechecked the AE and you are correct that the AE is set to join a wireless network.
With having so many devices running on the wireless network, would it make sense to have a few device on each wireless system?(D-Link, TC, and AE)
I know it sounds like overkill, but there is the possibility that all the devices could be running at once. I'm not sure if that would cause any conflicts.
Is there any advantage to turning on the wireless on TC just for the iPhones for example or is it better to keep things as they are?(It works but is it efficient?)
Please be aware I'm not fully knowledgeable with wireless routers and their capabilities.

New Airport Express - interfering with home wireless network?

I have an IMac and laptop PC both connected to a wireless home network. I plugged in the new Airport Express, and ran a Toslink cable to my home stereo. My intent is to stream music from the IMac.
When I plug in the AExp I get a flashing amber, then the green light, then flashing amber. I asked the AExp to "join" my network. Soon after the first green light the home wireless connection is unavailable to both my IMac and PC laptop. If I unplug the AExp then the laptop PC reconnects to the network. With the AExp unplugged I also must have "Turn On AirPort" on the IMac to have the internet status as "connected".
Basic problem: when I plug in the AExp both home computers disconnect from the home wireless network.
Any suggestions to getting the AExp to work within the home wireless network?

First, perform a "factory default" reset on the 802.11n AirPort Express Base Station (AXn) to get it back to its "out-of-the-box" configuration.
Then take a look at the following steps to be sure that nothing was missed:
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless tab
Wireless Mode: Join a wireless network
Network Name: <existing wireless network name>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup > Music
Enable AirTunes (checked)
iTunes Speaker Name: <enter the desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings ot the AX

Problem for connecting my computer to my wireless router via ethernet cable

I have a wireles router model BEFW11S4. I have three computers connected to the router by wireless. All these connection work well. I have also a computer connected to the same router via an ethernet cable. This connection does not work, I cannot access internet with that computer. What can I do to correct the problem?

First off, you need to ascertain if the network card in the computer that is not working is capable of sending and receiving legitimate packets.
Best thing to do is try and connect this machine directly to your Internet Service Provider modem and see if it works.
If it doesn't, first you need to check if your computer is capable of acquiring an IP address automatically (See below for details).
If it is setup to acquire an IP address automatically, but still does not work you either need to find someone who knows how to test network hardware for you or you could try installing a different network card in your computer.
There are 2 ways a computer can receive an IP address. A typical way is for your router to provide one to the workstation using something called DHCP. The other method requires you to know the exact IP addressing required on your LAN such that your workstation when manually configured with an IP address knows where to send it's packets to get out to the Internet.
To check if the computer that does not work is configured to "automatically" receive an IP address from your router, do the following:
1. click on Start
2. click on Control Panel
3. double-click on Network Connections
4. right single-click on "Local Area Connection"
5. click on Properties
6. Scroll down the list until you see "Internet Protocol (TCPIP)"
and then double-click that item
7. Make sure "Obtain an IP address automatically" and "Obtain DNS server address automatically" are checked.
This setting allows the workstation to send a broadcast message looking for a DHCP server which can assign an IP address to the workstation. Your router typically would have a DHCP server configured for providing IP addresses. The typical home-based routers can be configured to run a DHCP server or not. Chances are that your wireless computers are automatically acquiring an IP address from your router and therefore it should work on Ethernet connections as well.
It is possible for something to be not working inside your router that would prevent the DHCP server from distributing IP addresses only on the Ethernet connections. If this is the case you would have to acquire a new router.
There is more that can be looked at, but this is where you need to start.

Problem getting connection to work with WRT54G and iPod Touch 4G

Hi, I just recently received a brand new iPod Touch 4G and I seem to be having connection troubles with it. This has also happened on my previous iPod (an iPod Touch 1G). This router has a pretty old firmware from like 2006. The problem is not that I can connect to the router and get the ipod to show the checkmark, but it is that I cannot get any network connection through the router. I have a Windows 7 laptop that connects perfectly fine using the router. Also, I believe my Nintendo DS Lite can connect flawlessly as well. I noticed that there seems to be a bit of trouble with Apple products connecting to Linksys routers in general. Does anyone know what may be causing my connection issues? When I got my iPod Touch 1G, it wouldn't connect from the get-go so I just ignored it and used the wifi at my university whenever I went there during the day.
If I need to provide any technical information, I can because I have access to the setup for the router. Thanks. :-)

Try changing the security mode to WEP and see if that works.
Open the setup page of the router.
Click on Wireless tab and go to Wireless MAC filter sub tab. Make sure that Wireless MAC filter is disabled on the router.
Try to upgrade the firmware on your router.
Connect the computer with the Ethernet cable to the router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 10 seconds. Power cycle the router and reconfigure it.
Change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.

Setting up HP Officejet 6500A; not sure how to connect to web w/ home wireless network

I have a small home wireless network. I set the printer up today but it says that I must connect to the internet (fax part is working). The only desktop I have, I keep off most the time and just use my laptop (which is for work so I can't set the printer up to this).
Is there a way to connect the printer directly to my router? They are only a few feet from one another; however, I have no clue how to do it and the instructions manual didn't tell me much. Do I need a phone line? What would I use to connect the two?
This question was solved.
View Solution.

Use an Ethernet cable, available in any tech store, online or even Target will have them.
Plug it into the back of the printer and router. You should be able to add the printer to your laptop. Let me know what operating system you have and I can help.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Connect Lumia 1020 with Sony wireless headphone

Is there any way I can connect my Sony MDR 1RBT wireless head phone with my Lumia 1020 using wireless blue tooth?
I was very happy with my Lumia 800 which connected perfectly with my Sony head phone wirelessly.
However, my newly bought Lumia 1020 does not connect.
It does not recognize the blue tooth "profiles".
Someone please help me!
Is there any way to update my Lumia 1020 software, tweak it or mod it, so it will connect with my Sony head phone?
Solved!
Go to Solution.

They've both got A2DP so should work. Try resetting the headset and repair.

Problem connecting Macbook Pro with WRT160n wireless

My roommate and I recently got WRT160n, and she has a PC and her connection was fine. But for my Macbook, whenever I try to connect to the network and put in my password (the one that I set up) it says that the password is incorrect. I'm not sure what the problem is. I tried configuring with the 192.168.1.1 thing, but that didn't help me much either (unless I was doing it wrong.) Help?

Make sure that the wireless password is correct ....also disable all firewall on the MAC computer .... & check that you are able to connect the network or not ....
If so then try to ping the DG ....

Connecting problems from my laptop to my home wireless system

I had Linksys Wireless router about ten months ago, I set a wireless system in my house on my desktop to use my laptop and connect to internet. I had a windows XP. Ihave been using since then. I did not have any problem for set up and use, till I installed Windows Vista last week. Since then I have being struggling to re-estabilish my connection but i am not successful so far. I can get wireless connection at my son's and at my daughter's house with no problem, as before. I can get a local but insecure wireless connection but I don't want to use it. Why my laptop can not connect to my wireless but can connect everywhere. Can you help me please.(Router is WRT54G)
Thanks, Dogan Ulkekul

I had the same problem of keeping a connection on my brand new alienware laptop. I had to call customer service about it, along with some other problems I was having. He solved the dropping wireless by reinstalling the driver, only, right click on the setup file and goto properties. There was an option on running the driver as Windows XP, 98se, and such, choose XP and install the driver, rebooted and the signal was excellent from there on out, and no droppage like cingular cell phones
Now if I can get my wireless router to work right during games and not lag out....

IPhone 4 suddenly stopped connecting with home wireless network

Upon getting a new wifi router, initially my iPhone 4 connected. Last night I lost wifi conneciton on it and cannot get it back. Updated to IOS 7.1 to see if it would help. Nothing. Have reset network setings, gone into airplane mode and attempted hard restart. Have also reset modem. The phone worked on another wireless network and all other devices in our house are working fine. Does anyone have any insights/ had this problem before? House network is Bell Fibe.
The phone can see the wirless network but when we go to connect it infinetly spins.
Thanks!!

Hi garth_w,
If you are having issues connecting to your home network from your iPhone after a change in routers, you may find the following article helpful:
iOS: Troubleshooting Wi-Fi networks and connections
https://support.apple.com/kb/TS1398
Regards,
- Brenden

Problem connecting to internet with WRT54GL wireless router.

Hey fellas. I currently have a cable modem and a Linksys WRT54GL router with DD-WRT flashed connected to two computers. My desktop is wired to it, and I have a Windows XP and Mac OS X partition on my Macbook Pro, which uses the wireless connection. My PC is working fine, and the OS X partition on my Macbook Pro is running fine, but the XP partition is not doing too hot. Thing is, I have a connection to the router with an excellent signal strength, but Im getting BARELY any packets sent/received, if any. My settings are set to be assigned from the DHCP, but I can't seem to ping the assigned IP. I type ipconfig /all and everything seems to be in order - nothing abnormal to speak of, but I'm getting nothing For the record, I'm using WPA2 security. I'd really appreciate any help you guys can offer. I'm pretty tech-savvy so don't be afraid to use some more technical terms with me. Thanks in advance!

I think I should add that the windows partition does not seem to work when connecting to any other network, as well.

Problem when connecting to internet with a proxy...

Hi guys, I really need your help this time I hope you can follow my explanation on my problem...
Heres the deal: I just got my Macbook Air and it had been great until... I took it to my school and tried to connect to the Wi-Fi network which needs a proxy configuration (http://configura.ccm.itesm.mx/proxy.pac). First I join the wireless network and then I set up the proxy URL in network settings. The first time it worked and I was so happy, but then I closed my Macbook Air to go to my next class and when I open it again the internet is completely dead The configuration stills there but Neither Safari nor Firefox can display ANY website, the weird thing is that a lot of people has Macs on the same classroom and they get a perfect connection, I even asked them for help but they can't find what's going wrong...
This is sooo frustrating since this is an expensive Mac BTW the wireless connection in my house works great I have no problems there the only problem is at school at sometimes... Even my iPhone can connect to the wireless network without a problem and it has a smaller antenna than the Air...
I hope someone can help me I'm so confused and frustrated right now...
NOTE: There's an in-campus Apple Store and all the computers there have the internet configured exactly the same way i do...
Please help

Hi Johannes,
We are facing the same question with our 7.0 Portal (SPS 13). It seems that the application "NavigationWS" does not exist, there is not even an application alias defined at the HTTP provider of the J2EE engine.
What Portal version are you using? Is there a difference to the Portal that has no problems with providing the wsdl?
Kind regards,
Florian Dworak
Message was edited by:
Florian Dworak

Problem to connect E 73 with home wireless

Similar Messages

Maybe you are looking for