Problem to create a system landscape in portal

Hi,
I am trying to create a system landscape in Portal (version 6.0) . Using this I am trying to connect a external SAP R/3 system. Which is basically a CRM system. I have same user id and password in both the system. But I failed to connect. I am getting the following errors :
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: WAS Protocol (http) WAS Host Name (sapsrv.techmahindra.com:51000)
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (sapsrv.techmahindra.com:8010)
6. User mapping is not valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Please advise.
Thanks and regards
Indranil Datta

Indranil,
Can you tell us the exact settings you made on your system entry? All we know from what you have posted is that there is a connection error - without more details on the error (from the defaultrace.trc log, perhaps) or details on your system settings, it's impossible to help you.
Cheers,
Darren
<a href="http://www.fortybeans.com/">Read my blog</a>

Similar Messages

Problem in creating System landscape in Portal

Hi,
I am trying to create a system landscape in Portal (version 6.0) . Using this I am trying to connect a external SAP R/3 system. Which is basically a CRM system. I have same user id and password in both the system. But I failed to connect. I am getting the following errors :
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: WAS Protocol (http) WAS Host Name (sapsrv.techmahindra.com:51000)
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (sapsrv.techmahindra.com:8010)
6. User mapping is not valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Please advise.
Thanks and regards
Indranil Datta

Hi Simone,
Thanks for quick ur reply. I have configured the following parameters to create the system landscape.
For Web AS
============
WAS Host Name : <server name with domain name> :51000
WAS Path : sap/bc/bsp/sap
WAS protocol : http
For ITS connection
===============
ITS Host Name : <server name with domain name> :8010
ITS Path : /scripts/wgate
ITS Protocol : http
For connector
==============
Application Host : <server name with domain>
SAP Client : 001
SAP System ID (SID) : DEV
SAP System Number :10
Server port : 3210
System type : SAP_R3
Thanks and regards
Indranil Datta

How to configure new system landscape in portal server for bsp iview

Hi
can you tell me what are the necessary parameters (apart form default parameters that were there while creating new system landscape) for configuring a system landscape for using it in bsp iviews.
thanks & regards
Ashutosh

Hello,
what you call system name has to be the system alias, and this alias has to be the same between DEV/QUAL/PROD environment.
Your portal application will look for data/BAPIs/etc... with this alias. Your portal application will know on which environment it has to retrieve data/BAPIs/etc... will be defined in each system object you have defined for each environment.
Fabien.

Cannot create Portal System and Alias in System Landscape in Portal

hallo all,
i want to install vc, therefore i need to create an Portal System and Alias.
this i should do in system landscape in the portal
(System Admin -> System config -> System landscape )!
but when i open it, it is loading and loading and nothing happens!
can someone tell me, what problem that could be?
ep 7.0 is installed and i want to connect to ERP 2005 ECC 6.0.
regards Vartan

Vartan,
The VC needs a portal in order to run - it needs to borrow the core portal and J2EE functionaliy as the VC components only bring in VC specific applications.
One question to ask, based upon personal experience, is what browser are you using here please? For instance, I've hit this issue when working from Firefox (1.5 or 2.0) but not when I'm running the same link in IE 6.0.
Just a thought. Let me know how you do.
Cheers,
Tim

How to create 4 system landscape in CMS

hi all,
before i will explain my situation, currently i have the server DEV - QAS - (PRD1 and PRD2), understand that one track only allow three system landscape in CMS, is there any solution for me to make cms transport my request to 4 system landscape? thanks.
best regards
Hariyono

Hi,
U can have 4 systems in CMS landscape. Thats not a problem. Even u can try for complex also.
Coming to
DEV - QAS - (PRD1 and PRD2),
What exciatly u want. Can u explain us,
Do u want the movement of request in the path like DEV--->QAS--->PRD1
|
|---->PRD2
In such condition, create a buffer after QAS, where in all transport requests will be moved in to Buffer from QAS, from there u can make them to move into PRD1 and PRD2.
Let us know if u have any issues,
Regards,
Ravi

Problem in Creating a System through WEB AS

Hi ,
I created a System (ECC 6.0) in Portal and testing it through WEB AS.I'am able to "Test the connection for Connectors" but when coming to test WEBAS am getting an error "Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (srtplecd:8000)
5. HTTP/S connection failed "
please help me in this.
with regards,
pradeep.B

Yes i had entered everything required for WAS and when i'am doing Connection Tests through WAS am getting this error "SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (srtplecd:8000)
5. HTTP/S connection failed"

How to create a system object in portal that points to a web dispatcher

Hi,
How do we create a system object in the portal for a web dispatcher? The web dispatcher in turn points to an ECC system. The path for communication is EP>Web Dispatcher>ECC
Regards,
Sridevi

Hi,
Connection test for the following succeeded:
1. SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mtw02spwp02:80)
5. The host name mtw02spwp02 was resolved successfully.
6. The Web AS ping service http://mtw02spwp02:80/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/bsp/sap was obtained successfully.
2. ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (mtw02spwp02:80)
6. The host name mtw02spwp02 was resolved successfully.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/gui/sap/its/webgui was obtained successfully.
Next test for SSO failed:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards,
Sridevi

Problem while creating business system...?

Hi All
My Scenario is RFC - To - File. For this i am trying to creating a business system with web as ABAP. I have specified all the parameters but when i click on next i am getting "The selected client has an associated logical system name that is already used for another business system. Select a different client" message.
Now how to create an another business system as web as abap with same server , client , installation number and all.... Could you please tell me...
I dont want to use the existing business system
Thanks & Regards
Ravi Shankar B

Sun,
yes, u have 2 option as Ramesh said...
There is no problem in reusing the business system.
The selected client has an associated logical system name that is already used for another business system. Select a different client" message. if u want to create another business system...give dirretent Logical System name
and different client
see here how to create Business system...step by step!!
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
regards
biplab
**reward if it helps you!!

Problem While Creating New system

Hi.
i have downloaded sap netweaver 7.01(trail version) from SCN.
installation was successful.
Frontend GUI was installed in System Drive(C Drive)
and Netweaver was installed in D Drive
i have started the application server.
in the logon pad what are the details i need to enter while creating new systems in logon pad.
i followed help and typed the same info as in the f1 help.
in connection tab:
connection type: Custom Application Server
System connection parameters:
Description: SAP
Application Server : u9cmain (as in f1 help)
System Number: 00(as in f1 help)
System ID: u9c(as in f1 help)
SAProuter Sring: (empty)(as in f1 help)
after giving this details. when i logged in it shows this "hostname u9cmain unknown, check your application server name"
how can i rectify this error. where can i check my application server name...
help me out plz.

>i followed help and typed the same info as in the f1 help.
You can't use the same host name and SIDs as per help under F1
Configure as below:
Description: SAP (You can use anything)
Application Server : (your computer name or IP address)
System Number: (has to be 2 digit, and which numbers you have assiged while installation)
System ID: (your instance name)
SAProuter Sring: (not required)

Problem while creating Logical System Connecting Portal to ECC (Backend)...

Hi
- I am trying to connect portal to ABAP so that from portal's iView i could access any ABAP T-Code (e.g. SE37).
- Secondly, just wanted to let you know that i am not implementing SSO.
- I used iView's SAP GUI Type = SAP GUI for HTML.
I made following 3 tests, out of which ITS connection is failed. and while previewing my iView i m not able to connect with ABAP and giving error: "The URL http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui was not called due to an error."
Could u pls guide me what to do.... And i mentioned everything at the bottom in detail.
Thanks & looking forwarded for your replies.....
SAP Web AS Connection (Successful)
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (192.168.1.104:8001)
5. The host name 192.168.1.104 was resolved successfully.
6. The server 192.168.1.104 was pinged successfully.
7. The Web AS ping service http://192.168.1.104:8001/sap/bc/ping was pinged successfully.
8. An HTTP/S connection to http://192.168.1.104:8001/sap/bc/bsp/sap was obtained successfully.
ITS Connection (Failed)
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Pings the server to see if it is alive.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (192.168.1.104:8001)
6. The host name 192.168.1.104 was resolved successfully.
7. The server 192.168.1.104 was pinged successfully.
8. User mapping is valid
9. An HTTP/S connection to http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui/ was not obtained successfully; this might be due to a closed port on the Firewall.
Test Connection with Connector (Successful)
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
1. Retrieval of default alias successful.
2. Connection successful.
I am getting following error while Previeiwng iView.
Error when processing your request
What has happened?
The URL http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui was not called due to an error.
Note
The following error text was processed in the system D10 : Template interpretation cancelled, syntax error.
The error occurred on the application server eccdcs1s_D10_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      SYSTEM-EXIT of program SAPLSFUNCTION_BUILDER
      Function: RS_FUNCTION_INITIAL_SCREEN of program SAPLSFUNCTION_BUILDER
      Method: IF_WB_PROGRAM~PROCESS_WB_REQUEST of program CL_FB_FUNCTION_INITIAL_SCREEN=CP
      Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR===============CP
      Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR_VIS_AS_DYNPRO=CP
      Method: PROCESS_WB_REQUEST of program CL_WB_MANAGER=================CP
      Method: PROCESS_REQUEST_QUEUE of program CL_WB_MANAGER=================CP
      Method: IF_WB_MANAGER~SET_WORKSPACE of program CL_WB_MANAGER=================CP
      Method: START_INTERNAL of program CL_WB_STARTUP=================CP
      Module: MANAGER_START of program SAPLWB_MANAGER
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the   system D10 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server eccdcs1s_D10_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server eccdcs1s_D10_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: SAPUSER -l: E -s: D10 -i: eccdcs1s_D10_01 -w: 0 -d: 20090924 -t: 202054 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Edited by: Harpal Singh on Sep 24, 2009 4:55 PM

Hi,
> Goto SE80, Select "Internet Service". Give service name as WEBGUI and enter. Right click on the WEBGUI and select Publish - > Complete service.
Source : http://wiki.sdn.sap.com/wiki/display/BI/BiAdminCockpit+Issues
Or call transaction SIAC_PUBLISH_ALL_INTERNAL to publish all services.
[Note 964521 - Short dump ITS_CANT_LOAD_INCLUDE w/ call of SAP GUI for HTML|https://service.sap.com/sap/support/notes/964521].
Regards,
Pierre

Problem while creating a system copy

Hi guys,
I've created a copy of my original BW system with the database copy of SQL server procedure:
1. Copy DB from "old" system and perform "post" activities (SID change, BD54 and after - BDLS -"old" logical sys. Name to "new" one..).
2. Verify RFC to ECC source system and create new RFC in ECC source system to "new" BW system.
3. Make BW logical system known to ECC source system (BD54).
4. RFC names are the same as Logical system names (both BW and ECC sides).
When I try to restore the source system connection (The original one) on the "new" BW system I get the following message:
The Connection BA is used in the PRD300YPCC. Source System as a Connection BWPCLNT550 to BW.
Do You Want to Delete this Connection in the Source System? The Connection is Restored After It Has Been Deleted Successfully.
If I answer delete - than the source system is working on the new copied BW system. But the original source system on the original BW system will have the same problem I'm having with the copied systems. This means that only one system could be connected to the ECC production on the same time.
Is there a way to make it work - i.e have both BW systems connected to the same ECC system. We want to have it done so we could upgrade one system and check it against the productive system.
Thanks alot,
Tomer Steinberg.

Still not solved.

Problems with creating reference system and user mapping in EP

Hi@all,
we have deployed Support Package Stack 25 in our portal. After that, the UWLJWF Administration was not available anymore. We get Portal Runtime Error. We habe resolved this error!
In the UME Administration in the System Administration --> System Configuration --> UME Configuration --> User Mapping tab
there was a message saying that CTS was non-existent. I changed the Reference System to (No reference system) and the UWL Admin page is working now!
But now, the SSO to our 3rd Party System is not possible anymore!
I have created an new system alias but i cannot see it in the User Mapping tab. How is it possible. I found no documentation?
Thany you and best regards
Juergen

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

Updation problem while creating multiple objects from enterprise portal

Hi All,
From enterprise portal i am calling an RFC 'BAPI_PROJECT_MAINTAIN' to create objects .
While trying to create multiple objects simultaneously it gives error "sapuser is currently using, can't be created".
It seems like as i am creating multiple objects by calling RFC repeatedly , while the first one is not updated fully i am sending the second value to be processed.
Pl. tell me how to overcome this. Do I need to add any sleep time in EP or any other method is there in SAP to overcome this situation.
thanks
sandeep

Dear Sandeep,
I have discussed this problem with EP team lead in my organisation, i have given your email id to him he will forward the solution on your id.
If usefull reward points helpfull....
Regards,
Rajneesh Gupta

Permission problem when create source system between BI and R/3

Hi All,
I want to create a source system between BI7 and R/3 system
Both RFC connections have been created and tested succefully on the 2 systems
But when i create the source system on BI I have the message :
"Changes to Repository or cross-client customizing are not permitted"
Any idea ?
Thanks in advance for answers
Sebastien

Hi All,
Thanks for your answer
The issue was solved when system is opened
Now my source system is created but I can't activate it !
When I try to activate I have 2 error messages in result :
RSAR 374 : The folowing errors occured in the source system
RSAR 375 : Result of the destination check: Timeout
There is no SAP help on these messages and for the moment I don't find thread about this on forum
Any idea ?

Problems with creating web service system

Hello,
I seem to have made some changes that made my unable to create web service systems for EP or Visual Composer.
The change I made is in NetWeaver Administration > Configuration > Application Resources > WebServicesFactory, I added the Configuration Property "UseCacheByDefault" with Boolean value = true.
After this, if I create a web service system in Enterprise Portal, the Connection Tests fail. In Visual Composer when I define a web service system, the error I am getting is: "Connector Factory not found for value WebServicesFactory".
I have tried to delete the UseCacheByDefault property I added as well as restart the server but I am still getting the error.
However when I test my web service using the Web Services Navigator, I am not getting any problems. So my guess is the problem lies with the connection factory.
Can anyone help me with this issue?
Thanks.

Hello,
Since creating WS system in the portal resulted with failed connection test, the issue has nothing to do with VC.
I'm just guessing, but try to configure proxy in the J2EE engine.
If that doesn't help I suggest you raise this question in the portal forum.
Best regards,
Shay

Problem to create a system landscape in portal

Similar Messages

Maybe you are looking for