Problem to detect Wifi networks. I restored without back up and it doesn't work. suggestions?
Problem to detect Wifi networks. I restored without back up and it doesn't work. suggestions?
I detected one time networks with the trick (air plane mode on, power off, sim card out, power on, sim card in, air plane mode off...). since nothing. I think it's a software problem. suggestions ?
Similar Messages
-
"could not write value quicktime task to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run verify that you have sufficient access to that key, or contact your support personnel.
if anyone can help that would be great thanks!I have tried that but still doesn't work, I have right clicked the itunes setup right as administrator, still has the key problem, this time, it is the ituneshelper key same location, but ituneshelper key
-
MacBook Pro Retina stopped detecting wifi network in one location.
Hey everyone, experiencing kind of a weird problem and was hoping someone would be able to help. I was doing some studying at a Starbucks, connected to their WiFi network when randomly my computer lost connection to their network and was no longer able to detect that it even exists. I was worried this was some sort of problem with my wifi card as it could no longer detect any networks nearby, where as before it was detecting multiple networks in the area of the Starbucks. Oddly i was still able to connect to the network on both my iPad 2 and iPhone 4S. Upon returning home I was relieved to find that I was still able to connect to my home wifi network. Since then i've been to many locations with my laptop but not once had an issue connecting to or detecting wifi networks, with the exception being at that Starbucks location. I've returned many times hoping that the problem would somehow fix itself, and that maybe it was just a problem with their network, but that doesn't seem to be the case. It seems to be that for whatever reason something happened to the MacBook pro while I was at that Starbucks location that has caused it to no longer detect the wifi networks there, and only there. One possibility could be the I updated Mountain Lion to the 10.8.2 supplemental update while there, but I don't see how that would cause the problem. If anyone has any ideas as to a solution that would be greatly appreciated.
Thanks in advance!I considered the network hog point, but I don't believe that I was using any excessive amounts of bandwidth. Also, because I can no longer detect any networks at the Starbucks location (not just the Starbucks network) I don't believe that this is the problem. Also, when I updated the operating system I was sure to disconnect from wifi first, I had already downloaded the update on my home network, just had yet to restart to install it, so my security shouldn't have been an issue either. How exactly can I go about masking my MAC address so I could double check to see if it was the network issue?
Oh, also, I booted into Windows 7 via boot camp and for some reason Windows is also unable to detect any networks while at Starbucks as well, which is even more confusing. I don't know if it's worth mentioning, but I bought this MacBook pro retina in Canada and am now in There UK for school. I've heard that north American macs don't play well with one of the network channels that is commonly used over here, so that also may play a role in all of this. But considering that I was able to consistently use their wifi for a couple weeks with no issue, I don't see how that could be the problem. As far as WEP encrypted goes, the network is unsecured so I don't believe that's the problem.
Thanks for the response, I appreciably appreciate it! -
Iphone 6 not detecting wifi networks
my iPhone 6 is not detecting wifi network, i already switched off and on.
thankscheeku2000 wrote:
my iPhone 6 is not detecting wifi network, i already switched off and on.
thanks
Switched what off and on, Wi-Fi in Settings, the iPhone, the router? See this support document about troubleshooting Wi-Fi connections. If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support -
HT201699 CAN'T DETECT WIFI NETWORK
my iphone can't detect wifi network....
That must be frustrating.
Well, be sure to write back with any technical support issues you have. -
My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.
One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having -
My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
Database restore without temp, undo and control files.
Hi All,
You might found this question silly but I don't know so asking this question here.
I have cold back up of the database. Now, I want create clone of that database, but I have some different paths for the DBFs so I will create new control file after restoring the database.
Now, I know that I don't need control files and tempfiles to be restored. I have 10 undo files in backup but on the new clone database I don't need all 10. I want only 5. So can I do the restoration without undo , temp and control file and later on add undo and temp?? and if yes then tell me that can I add them at mount level??
This is my first restore, Please guide me its very urgentNitin Joshi wrote:
f the COLD Backup does not include the Online Redo Logs, an ALTER DATABASE OPEN RESETLOGS is requireed >>to create these Online Redo Logs. Unfortunately, an OPEN RESETLOGS can only be done after an Incomplete >>Recovery or when using a Backup Control file.
Therefore, we do a RECOVER with a CANCEL to simulate an Incomplete Recovery.Completely agree with you Hemant. And the links you've provided,i've gone through many times. Excellent description.
I just wanted to know in above(OP's) scenario if he has complete cold backup(includes online redo logs), does he really need open reset logs or any recovery?
Regards!no , if you have cold backup with online redo log files then i don't think so you need to open database in resetlogs.Resetlog is always after incomplete recovery or recovery using backup controlfile or you dont have redo logs.
I am completely agree with you that with given scenario for the cold backup undo tablespace would not be part of recovery and you can
-offline drop undo tablespace file
-create another one undo tablespace and its undo datafile
-point spfile to that newly undo tablespace
I think Aman is saying in the context of restore and recover online database where undo tablespace create a vital role in database recovery, the undo blocks roll back the effects of uncommitted transactions previously applied by the rolling forward phase.
Khurram -
My ipod touch 4th gen shows that it is connected to a wifi network but when i try to browse safari it doesnt work.please help me out.
I am using wifi from a mobile by using the tethering option.Hi there amalrockzz,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Additional Information
Find information on connecting to a Wi-Fi network.
Some third-party routers may not be compatible with all iOS devices, even after updating to the latest firmware. If your iOS devices can successfully connect to other Wi-Fi networks, contact your router's manufacturer to ensure that your router is compatible with your iOS device.
See recommended settings for configuring your Wi-Fi router for use with iOS devices.
-Griff W. -
Hi I am having a problem to delete call log in iPhone 3GS from last 1 month, I have restore iPhone many times but it doesn't works, pls give me a solution , whenever I try to delete call log it's hang for some time, pls tell me how to restore call delete option
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?
Hello ole-gunnar,
Thanks for using Apple Support Communities.
If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
If you see a black screen
You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on.
You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
Restart your device.
If it still doesn't respond, or if it doesn't turn back on, reset your device.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Alex H. -
After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?
What error do you get if any?
Have you tried connecting to another network besides your own?
Do you use DHCP on your router or static IP address? -
everytime i link my iphone up to my laptop the message 'welcome to your new iphone' with the option restore from back up or new iphone. i once did restore from back up and it deleted all my recent pictures, music etc. how can i get pass this stage?
Hi Khuram1981 - thank you thank you thank you! All sorted! dont suppose you know how to fix another problem I have??? for weeks now, since updating to ios5 I think, for some reason every time I have tried to log onto app store it says CANNOT CONNECT TO ITUNES STORE. It's nothing to do with my computer, and I've been to the Geniius bar but they couldnt help and nothing I seem to do lets me update my Apps and even worse, I cant even buy any more. Any suggestions?
Again thank you SO much for helping with other problem = a real relief.
Chatterwind xx -
Help! I just restored my ipod touch 2nd gen cos I needed a clear out. I went to sync some music back on, and it seemed to work. However when I went into 'music' it said 'no content'. I tried syncing music 3 times and it did the same every time. Help!
Try plugging your ipod into your computer. Then start up itunes. Let it load everything. Then click on your ipod and play a song from your ipod's library. Not your itunes library. If it plays the song, then go ahead and stop it, disconnect your ipod, and check the content once again.
I had the same problem and beleive it or not, this worked. I synced my ipod like 5 times before finding this answer on the web. Let me know if I need to clerify anything. -
AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?
I had a bright house cable modem that also had built-in wi-fi.
Don't mean to be picky here, but if the "modem" had built in Wi-Fi, it was not a modem. It was a modem/router, also known as a gateway type of device.
A device like this combines the functions of a separate modem and separate router in one package. Turning off the wireless on a device like this does not make a it modem.....it is still a modem/router or gateway with the WiFi turned off.
I think that if I have them replace the current "complicated" modem with a "simple" one I should be able to get the guest network up and running.
That would be correct. Hopefully, they offer this type of option for their customers.
Maybe you are looking for
-
How do I upload photos from my PC to my ipad without deleting the photos already on my ipad?
How do I upload photos from my PC to my ipad without deleting the photos already on my ipad???
-
How to get coordinates of a ROI in an image in Labview
Hi, I have a question regarding image processing in NI-IMAQ. I have Ni-IMAQ module available, soon I may acquire NI-Vision too. I have an image file and I would like to draw a rectangle as Region of Interest (ROI) and be able to get the coordinates o
-
I Want to transfer items, including * especially* an in-progress game to a new iPAd air from an existing ipad2 without losing progress. I have updated to the cloud. Do I have to restore the old ipad2 first, before I begin with the "hello" screen on
-
Display workorder only related to vendor selected in Vendor name UDF
Hi , I am using SAP 2007 PL 18 , In a Goods Issue Form I am created two UDF 1) Vendor Name 2) Work Order Nos . Here queries related Workorder No. Display workorder only related to particular vendor selected in Vendor name UDF . Pl provide me
-
HT1277 how do I get rid of my spam e-mails?
My Spam has 3000ish e-mails in it. How do I get rid of spam e-mails?