Problem to Edit DBAdapter through wizards

I have a trouble of using the wizards to edit my DBAdapter. The wizards screens became empty after a few click and the next button was also disable. I also use a new Jdev after throwing out the old one but the result is the same? any idea?

Hi,
A work-around for this is, editing the xsd/wsdl/top-link mapping through JDev for the DBAdapter.
It might not be easy though, but it does work.
I hv done that a couple times & the changes took effect.
PS : you'll hv restart your JDev for those changes to apply.
Regards,
Madhu !

Similar Messages

Problem in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

Problem in editable alv table .

hello friends ,
i am facing a problem in editable alv ,the problem is while saving my data in internal table through editable alv one of my numeric field is being wrongly updated .
for eg : if i am entering '2.00 ' in the field the value updated is 0.02.
regards ,
arpit.

Dear Arpit
Please check the below code and it may very useful
TABLES: VBAK, VBAP.
TYPE-POOLS: SLIS, ICON.
DATA: BEGIN OF ITAB OCCURS 0,
      VBELN LIKE VBAK-VBELN,
      ERDAT LIKE VBAK-ERDAT,
      END OF ITAB.
DATA: BEGIN OF JTAB OCCURS 0,
      VBELN LIKE VBAP-VBELN,
      MATNR LIKE VBAP-MATNR,
      KWMENG LIKE VBAP-KWMENG,
      END OF JTAB.
DATA: TB_FCAT TYPE SLIS_T_FIELDCAT_ALV,
      WA_FCAT LIKE LINE OF TB_FCAT,
      WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
      TB_EVENT TYPE SLIS_T_EVENT,
      WA_EVENT LIKE LINE OF TB_EVENT,
      TB_HEADER TYPE SLIS_T_LISTHEADER,
      WA_HEADER LIKE LINE OF TB_HEADER,
      WA_KEYINFO TYPE SLIS_KEYINFO_ALV.
CLEAR WA_FCAT.
WA_FCAT-ROW_POS = '1'.
WA_FCAT-COL_POS = '1'.
*WA_FCAT-REF_FIELDNAME = 'VBELN'.
WA_FCAT-REF_TABNAME = 'VBAK'.
*WA_FCAT-OUTPUTLEN = '10'.
WA_FCAT-FIELDNAME = 'VBELN'.
WA_FCAT-EDIT = 'X'.
WA_FCAT-SELTEXT_M = 'DOCUMENT'.
APPEND WA_FCAT TO TB_FCAT.
CLEAR WA_FCAT.
WA_FCAT-ROW_POS = '1'.
WA_FCAT-COL_POS = '2'.
*WA_FCAT-REF_FIELDNAME = 'ERDAT'.
WA_FCAT-REF_TABNAME = 'VBAK'.
WA_FCAT-FIELDNAME = 'ERDAT'.
*WA_FCAT-EDIT = 'X'.
WA_FCAT-SELTEXT_M = 'DATE'.
APPEND WA_FCAT TO TB_FCAT.
CASE SY-UCOMM.
WHEN 'VBELN'.
    WA_FCAT-SELTEXT_M = 'SURENDRA'.
    MODIFY TB_FCAT FROM WA_FCAT.
ENDCASE.
SELECT VBELN ERDAT FROM VBAK INTO CORRESPONDING FIELDS OF TABLE ITAB UP TO 15 ROWS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = SY-REPID
   IS_LAYOUT                         = WA_LAYOUT
   IT_FIELDCAT                       = TB_FCAT
TABLES
    T_OUTTAB                          = ITAB
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Surendra P

Problem with Edit IN function between LR 2.3 and PS CS3

I recently upgraded my system to a Windows Vista 64 bit Core 2 Quad with 8 GB. Lightroom now works and loads images the way it should. I do have one major concern and need any help possible.
I am using LR 2.3 in 64 bit and PS CS3 ver 10.0.1 (which is 32 bit - loads slowly but otherwise works fine). The problem I am encountering is in LR Develop / Photo / Edit In... - using any of the menu items:
"Edit in Abode Photoshop CS3"
"Open as Smart Object In Photoshop"
"Merge to Panorama in Photoshop"
"Merge to HDR in Photoshop"
"Open as layers in Photoshop"
Photoshop opens but no image(s) are exported and I receive the message in LR - "The file could not be edited because Adobe Photoshop CS3 could not be launched."
Photoshop, however, was launched but no image exported and so I can't work on the image in PS. The appropriate TIFF image is created in LR for the first two menu items - nothing for the last three menu items.
I can create a partial work around by setting PS as an external editor, however, I can't use 4 of 5 of the menu items.
All the menu items work fine in Windows XPpro.
Any help is much appreciated.
PS I also tried the most recent Window 7 RC with exactly the same results.
Thanks
Bob

Don
I wasn't shouting - I just cut and paste the exact text and font in its original size and type as was shown in the message. Never had a thought that someone would be offended by cutting and pasting exactly what was in a message - it would appear that John Williams saw it for what it was.
However, sorry if I offended you.
Bob
Date: Mon, 1 Jun 2009 19:15:15 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Edit IN function between LR 2.3 and PS CS3
There is no reason to shout. There are only other users here trying to help.
>

Blog post : "Bug in Create/Edit View Criteria Wizard (JDeveloper 11g)"

hi
Using steps 1 to 13 from the blog post "Bug in Create/Edit View Criteria Wizard (JDeveloper 11g)" by Andrejus Baranovskis, I have been able to reproduce the issue he describes.
see http://andrejusb.blogspot.com/2008/12/bug-in-createedit-view-criteria-wizard.html
I the blog post comments he writes "... there was no time for me to fill bug in Metalink ...".
Maybe someone from Oracle can pick it up from this forum post and file it as a bug if it is one (and if possible post the bug number here).
many thanks
Jan Vervecken

The mechanism is to create a reproduceable test case, create a Service Request in metalink.oracle.com, post the test case, and convince the analyst to file it as a bug.
It may be not efficient at some time, but this the way it is handled.
--olaf

Problem with 'Edit Locally' command -- Due to IISProxy?

Hi,
We have a problem with 'Edit Locally' command since we are using Windows Authentication. Our architecture is:
SAP EP 6.0 SP2 Patch 28 (Solaris)
IIS Proxy (Windows 2003)
The situation is:
If we access to SAP Portal using old url (directly to Solaris) using form-based authentication we do not have any problem with 'edit locally' command.
However, if we access to SAP Portal using IISProxy and Windows Authentication we get an 'Operation failed' error message.
     Java plug-in console shows the following message:
cargar: clase com/sapportals/wcm/app/docapplet/DocApplet.class no encontrada.
java.lang.ClassNotFoundException: com.sapportals.wcm.app.docapplet.DocApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Where is the problem? Is due to authentication method? SAP Portal or IISProxy configuration?
Thanks,

Thanks for your comment,
Now, we have tested with version 1.5.0_01 plugin version but the result is the same: 'Operation failed'
This is a very important topic to solve before installing Windows Authentication in a productive environment.
Has anybody any solution?
Damiá

Problem in Edit Message Payload in AE

Hi all,
actually we have a problem with editing the message payload of a failed message in the adapter engine.
Messages Editor shows "The version you want to edit is locked"
Log in NWA shows "EditorDynPage: loadMessage()
Thrown:
com.sap.aii.mdt.api.exceptions.OperationFailedException: VersionAlreadyLockedException in Method: AdapterFrameworkMonitoringBean: getTransferMessage( Query ). The version you want to edit is locked. Message: Version 1 of message 4eb86ecc-fb6b-0c10-e100-80000a93147c(INBOUND) is already locked for editing.; To-String: com.sap.engine.interfaces.messaging.api.version.VersionAlreadyLockedException: Version 1 of message 4eb86ecc-fb6b-0c10-e100-80000a93147c(INBOUND) is already locked for editing."
How to delet te lock, the nwa => problem management => locks shows no locks?
regards Ralf

Hi,
In NWS, you should also have a tab "Database Locks". See detail in this [SAP help|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/b2e0156b156ff4e10000000a42189b/content.htm].
regards.
Mickael

Problem in creating IR through BAPI_INCOMINGINVOICE_create BAPI

Hi,
Some problem in creating IR through the BAPI BAPI_INCOMINGINVOICE_create. I am able to see the IR number after executing the BAPI but unable to see the IR number in the table. The IR number is not getting updated in the database table even though we are doing the commit work after executing the BAPI. Could anyone help me out with this error.
Regards,
Ram

First of all I am assuming that you did not get any error in the BAPI return structure (even though you see document number populated).
Secondly, I guess you tested the BAPI with SE37 and did not get any error (functionally there are a number of BAPIs available to post an invoice and it is important to figure out the correct BAPI - e.g. PO, non-PO invoice, invoice as a GL entry only, etc.).
If that is not true (there is some error in posting), since during the BAPI call the next document number is obtained as a first step, you will see the document number but subsequently if for some reason it is not posted, you will see the result as you mentioned (no data in the database).
If you are using correct BAPI and have no errors, then in ABAP program make sure to call 'BAPI_TRANSACTION_COMMIT' after the BAPI call to post invoice.
For non-SAP external system, you need not have to call the commit BAPI but just closing the connection to SAP will help.

I bought iPhone 6 Plus few days ago and I have the following problems: 1) When entering through Safary to Google Images and tap on each on of them they do not enlarged nor I am able by click on them to enter into the connected website

I bought iPhone 6 Plus few days ago and I have the following problems:
1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
I would highly apreciate any help
Kind Regards

I bought iPhone 6 Plus few days ago and I have the following problems:
1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
I would highly apreciate any help
Kind Regards

Facing problem in Information broadcasting through BI 7.0

Hi,
I am facing problem in Information broadcasting through BI 7.0
In Web Bex Anyalzer, i selected the information bradcasting via Email.
I did all setting for Information bradcasting, in the output Format, when I select the output format as HTML or MHTML the system gives is error when i click the excute button after scheduling .
It gives an Shot DUMP on "MESSAGE_TYPE_X"
And in WEB BEX Analyzer follwing are error messages
Note
The following error text was processed in the system BWQ : The current application triggered a termination with a short dump.
The error occurred on the application server uplbwq_BWQ_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP
But when i select the output Format as "online link to current data" there is no error when i click the excute button after scheduling . I receive a email with the Link for the online data, which open up query when i click the link.
But in the output type HTML or HTML it does not work.
Can suggest anu solution ASAP.
Thank in Advance.
Nilesh Labde.

from the OSS Message

Problem while uploading data through F-43

Hello Experts ,
I am facing a problem while data uploading through F-43.
Suppose I have many vendors with having several debit and credit items for each.So in t code same screen will appear for same vendor several times where we have to enter debit / credit items.
Please suggest how to solve this issue through LSMW/BDC program.
Thanks in adv.
A Miter.

Hi..
Use BDC Recording MEthod ...
Develop BDC program, Before Recording the Transaction sit with Functional Consulatnt for REcord The f-43.
After that that u can do ur coding and built ur own logic.
Prabu

CS2 Pixel Problems when editing

Hi, I am an amatuer Photoshop user. I have recently had problems with editing pics either resizing or adjusting levels, saving then trying to post to a website. The pictures show up awfully pixeled. I downloaded the same pics without editing and they look fine. I have also had pics printed and I dont have the pixel problem. I assume something is wrong with my PS CS2 software. Is there a update to fix this problem or do I need to delete and reload my PS CS2 software program?

Further information on this problem: It seems to be linked to the condition of the data fields in the Revise HyperTrend window.
Within this window is a box containing data lines corresponding to the items to be graphed. The headings are: Expression Line Color Min/Max/Pos/Height.
There is room in this box for 19 lines of data. If more than 19 Items are entered, a scroll bar appears to the right.
It appears that attempting to adjust the widths of any of these fields (to view more of the data in a field, for example) triggers this problem. It may also be triggered if the width of the data displayed is covered by the scroll bar.
Can anyone figure out why this is happening and what to do about it?

Editing HTML through the browser itself

Today, I went to JotSpot and reached the following page saying that Safari is not supported [from http://feedback.jot.com/KnownIssues/]:
Mac Support
<item>1. Mac support: WYSIWYG will work with the Firefox browser (free, open-source), but not with Safari. Safari does not allow you to edit HTML through the browser itself. Without this capability, we cannot offer WYSIWYG mode.
Any idea why Apple did not implement this feature? Is it in the roadmap?
Thanks!
- Mazzaroth

I do not know how JotSpot implements online editing, but I have been on sites using Safari which have allowed me to have an html editor with formatting buttons and a choice between wysiwyg and html editors.
You can always send in a bug report using "Report Bugs to Apple" under the Safari menu.
And for now, if you want to use JotSpot you can use Firefox.

Developing Master-Detail Through Wizard

When creating master detail form or a single form through Wizard ,it creates the form loads the data But if you try to modify or add a new row it gives following errors
JBO-26041 Failed to post data to database during update :.....
DAC-305 Dbaccess commit transaction failed .
Session1
JBO-26041 Failed to post data to database
Please Help

Sandeep,
Which version of JDeveloper are you using? Also, which version of the database are your tables on, and do they both have a primary key?
I know there were restrictions if your database is before 8.0, and your tables do not have primary keys.
Laura (JDev Product Management team)

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
can any one help me bcoz i have to publish without air runtime.......

Hi,
This option is available when your publish target is set to AIR 3.6.
You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
Thanks!
Mohan

Problem to Edit DBAdapter through wizards

Similar Messages

Maybe you are looking for