Problem to import file P2 (.mxf)

Hi,  I have a problem during the import of P2 file: I go to file, import, i choose the folder, during the import, the progress screen shot crashes; I tried to import few clip at time and I found that only one clip makes the crash, it's the last clip of the first p2 card; if I import this clip from P2 card there is not problem, but the problem come out when I import the clip from hard disk. The clip is not damaged, because with windows media player I can watch it. Few time ago I tried to import other files that makes the same problem with "media browser" and premiere successfully imported it. someone can help me? Thanks

Hi all,
I have had this problem continuously since I got my camera kit in March last year, although it's gotten worse recently, hence my presence here. I am military and it doesn't seem to be a problem for other, identical kits. I'm running Mac OSX 10.7.5 on a 17" MacBook Pro with a Panasonic P2 HD camera. I copy the entire card to an external hard rive, then import to Premiere CS5.  Sometimes, as mentioned, the import halts and Premiere freezes, so I force quit and import one file at a time, saving continuously, until I find the problem file and import around it. Occasionally, there's more than one. I don't see how this could be anything but a corrupt file issue (my camera sometimes shows the same files on-camera with a warning logo when I check) but I'm not the expert here. I am working on a deadline right now,  prompt help would be awesome if people have the time. Thank you.
- Dan

Similar Messages

  • Problem with import file type setting

    Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
    Can't find a way to overcome this. Thanks for any help.

    Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

  • I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

    I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

  • Permissions problem when importing file in Final Cut Pro X 10.1.3

    Hi guys!!
    Today, like all days, I opened up my Final Cut Pro X version 10.1.3 and created a new Library and new project. Then I selected "Import Files" and I checked all the files I needed. Last I clicked on import selected files and I received this error:
    "Directory Not Writable. The chosen directory is not writable."
    This is a real tragedy. I have to start an important project and I can't use the program at all.
    This is what I tried so far:
    - Checked Macintosh HD permissions - Done - No problems
    - I use an external HD as my scratch disk - Checked - No problems
    - Tried to create a new project on a new HDD - Same error
    - Checked Read / Write permissions on Macintosh HD and on footage folders - No problems
    This is my Mac:
    - iMac 21,5" Mid 2011
    - Core i5 2,7 GHz
    - 16 GB 1333 MHz DDR3
    - AMD Radeon HD 6770M 512 MB
    - HDD 1TB
    - 2nd External HDD WD My Book 3 TB USB 3.0
    - OS Yosemite 10.10
    I'm in panic. And I really don't know how to resolve this problem....
    Thanks for every little help you will give me.
    David

    And you're using managed media?
    Did you repair permissions for the drive?
    What OS are you using? Did you update to Yosemite? Did you do a clean install?
    "drwxr-xr-x@ 10 aaron  staff    340 Oct 28 19:51 project_local.fcpbundle"
    Where are you reading this string?

  • Problem of importing file from db

    Hi,
    I've installed both oracle 8i and 11g version, when i wanna import file from 8i version , but i can be opened 11g version only ,also even i could not import in 11g as unsuccessfully import,
    plz advice how to export file from particular version and give some hint,
    regards
    venki

    Hi,
    I've installed both oracle 8i and 11g version, when i
    wanna import file from 8i version , but i can be
    opened 11g version only ,also even i could not import
    in 11g as unsuccessfully import,
    plz advice how to export file from particular version
    and give some hint,
    regards
    venkiTo move data between 8i and 11g, you need to use original export/import utility.
    You need to run export of 8i using 8i version exp and import the dump file into 11g database using 11g version imp.

  • PROBLEM WITH IMPORT FILES

    I work with Adobe Premiere Pro CS 6.0. When I import the files in the MXF format, it's sorted by timecode in list view. BUT! it's sorted in icon view randomness. Why? How change the preferences to sort files in icon view by timecode?! Thank you

    Hi LRT LRT,
    That option was not available in Premiere Pro CS6. There is a shortcut menu for Icon view from Premiere Pro CC onward. It looks like this:
    Thanks,
    Kevin

  • Problem while importing files in premiere CS 5.5

    Hi,
    We tried to import a 25 minutes video file (format Quicktime, codec H.264) in premiere CS 5.5. The process stops after importing just a couple images (between 2 and 100). The same happend with other files formate.
    Do anyone have an idea where the failure could come from ?
    Thanks in advance,
    Ray

    Some reading... and a few questions to answer to give someone enough information to try and help
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    More information needed for someone to help http://forums.adobe.com/thread/416679
    Some is general about your computer and OS, some is specific to video editing
    Build a Configuration file http://www.piriform.com/speccy
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Plus Video-Specific Information http://forums.adobe.com/thread/459220
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
    Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
    Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
    Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

  • Surprising problem with importing files in iTunes 8

    iTunes has suddenly started acting a bit strange. Here's the situation:
    I downloaded some albums from eMusic. I have been an eMusic subscriber since 2005 and have imported hundreds of albums into previous versions of iTunes with no problem.
    Today, suddenly, iTunes refuses to import some albums, imports random individual tracks from other albums (but not the entire album), and imports some albums in their entirety with no problem.
    I've dragged folders and individual files to iTunes and used the "Add to Library" command to select folders and individual files. I've restarted iTunes, restarted the MacBook, unmounted the external drive, and remounted the external drive. I repaired permissions. I verified the external drive (it appears to be healthy). The result is always the same.
    For example:
    iTunes will not import John Coltrane's "Lush Life" at all.
    iTunes imports the last 4 tracks of "Thunder" by SMV, but not the first 8.
    iTunes imports all of "Live" by Pharoah Sanders.
    What's going on?
    Some info: iTunes Library contains 25033 items, 78.5 days, 149.62 GB.
    The external drive on which my iTunes Library resides has 283.76 GB available.
    My internal hard drive (a 200 GB Hitachi) has 106.46 available.
    I am running file vault: could that have something to do with it?
    I'll appreciate any suggestions and or help. Thanks.

    wow
    I was just thinking about downloading 8 but not until I hear more about this.
    I just joined emusic and downloading is a breeze with 7. It goes straight into iTunes without having to import separately.
    I was going to check out the emusic forum but it was down.

  • Problem with import files from windows media player into iTunes

    When I have tried to import my .wav lossless files created under windows media player into iTunes I use File, add folder to library but when the action is completed I get all of the files under the heading 'unknown album' with 'unknown artist'.
    Does anyone know that I need to do in order to include the artist and album ?
    Many thanks,
    John.

    You'll first need to add the MP3s to your iTunes library since the iPod is not compatible with Windows Media Player. You can use, for example, the File > Add to Library menu to do this.

  • Problems for importing files. avi

    hello,
    when I try to download a file. avi, a message appears saying:"the software that's used to decode the media is not available on this system. installing
    the correct decoder", how to resolve. The file is a movie downloaded from the internet. thanks

    We'll need a lot more detail about that AVI file. See this ARTICLE to get an idea of the problems that can exist and also some background on AVI's (and MPEG's and MOV's).
    The problem will likely be with your particular AVI file - not all are created equal.
    Good luck, and I look forward to the details. The answer will be contained with in that info.
    Hunt

  • Problems with importing files from iPhoto to Aperture3?

    I have just received my new iMac with Aperture3 pre-installed.
    When I try to import the iPhoto Library (File - Import - iPhoto Library..) or try to import a single picture, the picture shows pixilated in Aperture3. When I try to import the iPhoto Library - Aperture shows one pixilated picture from the folder and then it works forever trying to get thumbnails for the rest.
    Nothing happens.
    What can I do?
    The format for the pictures are jpg.

    But this iPhoto Library came from somewhere else? Right? From another machine? So, how did those photos get into that iPhoto Library? Did you import one Library to another? I ask as this is one of the ways you could find yourself working with thumbnails and not the actual images.
    Regards
    TD

  • Problem during importing file

    Hi all,
    I wrote the following command in the cmd: (imp user/pass file=d:\hr.dmp full=y)
    During the import process I recieve this message: (About to enable constraints)
    and I wait alot and it didn't finish.

    Is it still running? Do you see the process continuing to consume CPU, for example? Enabling constraints involves building indexes which may well take quite a while.
    Justin

  • Problem for import dmp file

    Hi,
    I had installed both oracle 8i and 11g, I'm trying to import my dmp file in oracle 8i, but that query will shift to 11g environment.
    How can i import my dmp file in 8i.
    eg:
    host imp sys/sys@ora file='D:\Ven_Excercise\hlw_demo\koow.dmp' ignore=y
    fromuser=trainee
    regards
    venki

    Already some references had been provided in ur previous post itself. Refer the
    link been provided there.
    Ur Orginal post:
      problem of import file
    Regards
    Nirmal

  • Problem in IMPORTING!

    I have a problem with importing files.
    eg i have a file: Complex.java
    how can i use this file in another program (NR.java)??

    I have a problem with importing files.
    eg i have a file: Complex.java
    how can i use this file in another program
    (NR.java)??There are 2 ways of that purpose.
    1.If they are in the different and you hope you have your own function lib, you can define package in Complex.java, and import the package, that you can use this class.
    Example:
    if your CLASSPATH = .;E:\java;
    you must put you Complex.class in E:\java\mylib;
    //==== Complex.java ====//
    package mylib;
    public class Complex{
        public int add(int a, int b){ return (a+b); }
    //==== NR.java ====//
    import mylib.*;
    public class NR{
        public static void main(String[] args){
            Complex obj = new Complex();
            System.out.println("Sum is ",obj.add(1,2));
    }2.If they are in the same directory, you can use it directly without define package.
    Example:
    //==== Complex.java ====//
    public class Complex{
        public int add(int a, int b){ return (a+b); }
    //==== NR.java ====//
    public class NR{
        public static void main(String[] args){
            Complex obj = new Complex();
            System.out.println("Sum is ",obj.add(1,2));

  • How can you import a canon mxf file (folder) into motion5

    I import the full folder into FCP 7 (no problems) but if i want to go straight into Motion 5.0.2 has anyone any ideas how to import the Canon MXF file or the folder?
    I have tried drag and drop and file/import etc without any success so far.
    p.s. I do not have FCP X
    Alan

    http://www.musitek.com

Maybe you are looking for