Problem to install 5.5 in graphic mode
Hi,
on my X86/64-system I had already successfully unbreakable oracle enterprise linux version 4.8 in graphic mode.
But I tried since some days to install version 5.4 or 5.5. The system hanged or showed only a quadrat.
Any help?
Thank in advance
hqt200475
If you're the hacker type, then you can install OEL5, and via console mode install the latest proprietary nVidia driver for Linux (need to download and copy it onto the server first). This taints the kernel - but in my experience, the kernel drivers from nVidia are fairly robust and works well. The nVidia installer is also pretty seamless. Cannot recall ever having a problem with the installation. You may however need the kernel header source installed. But having that installed should be standard on servers in order to install kernel modules and drivers.
Similar Messages
-
Oracle VM Server - install error - Graphical mode
Hi all!
I hope, you can help me the following problem.
I try to install an Oracle VM server to a FS server.
First, I tried the newest version - OVM S 2.2.1
In the begining Everything is allright.
But after I have to choose the keyboard, the next screen did not come up. Just a blue screen.
I went to the alt+F3 terminal, and I found a warning there:
WARNING Graphical mode is not avaible...Start text mode.
So the screen where I can partition the disk, did not come up..
I tried earlier version too - OVM server 2.1.5, but It is the same problem too.
Can somebody help me in this, what couse this problem, and how can I fix this, and install the O VM server?
Thx in advance!
Peter KokaiI purchased an Asus Sabertooth motherboard with an I7 4770 cpu and the Oracle VM server fails to detect the motherboard. I am seeing the same error that is posted in the Known Issues list with the Dell 380 Broadcom ethernet adapter.
Do I have a compatibility issue? The disk ISO was being given out at EMC World. I do not know how to tell what version it is.
I tried downloading the 3.2.2 version iso and it seems to have trouble with my USB devices, because my keyboard stops working and I can't select between media cd test or skip.
Are there any workarounds? Should I just wait for a future release? -
Satellite P100-387: Problems with graphics mode swithing on new nVidia
*Looking for help!*
_I have recently installed nVidia drivers from toshiba site (84.00) and since than my system has severe problems with changing graphical modes when starting applications in pre-determined mode (such as 800x600)._
This problem affects my son mostly, as all older games are trying to run in 'Full screen mode' that fails to initialise properly.
Also I have noticed that in dxdiag the option about DirecrDraw settings shows that it is completely not supported by my graphic card acceleration.
Any ideas on how to resolve the problem desperately needed.
Relevant nformation:
Graphic card - nVidia GeForce GO 7600 driver: 6.14.0010.8400
System Memory - 3MB
O/S - Win XP Professional 5.1 build 2600
?:|Have you installed the latest BIOS?
You could try reverting back to the original driver, it should be in C:\TOSAPINS. Or just Rollback the driver in Device Manager. Or revert back to a previous System Restore Point. -
Windows Vista: Unable to Install in graphical mode
I try to install NW 2004s ABAP on a VISTA laptop.
After starting the setup.exe I get the following error message:
The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag.
What does this mean? Where can I change this setting?
Thank you in advance,
HeikoNSP can't be installed directly on Vista...Please follow this link...
[Intalling minisap (Traial version) on Vista;
You should use VMWare, create an WinXP Host OS and then install NSP on it...
Greetings,
Blag. -
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode1344675 wrote:
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode
Why is your "requirement" to install in graphical mode? Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which). And what does THAT buy you on a server?
I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop. Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers. -
great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!
The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Problem Installing Virtual PC for XP Mode in Win 7 Pro(64) SP1
XP Mode has successfully installed, but Virtual PC has not. Installing Virtual PC requires only a Windows Update, so I downloaded the correct file -- Windows6.1-KB958559-x64-RefreshPkg.msu. When I try to install it I get that this update is already installed
on my computer, but I still don't have Virtual PC.
What now?
Thanks for any guidance that can be offered.
RobInstalling Virtual PC requires only a Windows Update...
Kinda/sorta.
<QP>
To use Windows XP Mode, you need to download and install Windows XP Mode, and Windows Virtual PC, the program that runs virtual operating systems on your computer.
When you install a program in Windows XP Mode, the program becomes available for use in both Windows XP Mode and Windows 7.
To download and install Windows XP Mode
Go to the Windows XP Mode page in Download Center.
Under Quick Details, select your language.
Click Continue and follow the instructions on the screen to validate your copy of Windows 7.
Select a version of Windows XP Mode to install and click Install.
Note: Windows XPMode_N versions don't include Windows Media Player.
Click Run in your browser's message bar, and follow the instructions on the screen.
When setup is completed, click Finish.
To download and install Windows Virtual PC
Go to the Windows Virtual PC page in Download Center
Under Quick Details, select your language.
Click Continue and follow the instructions on the screen to validate your copy of Windows 7.
Select a version of Windows Virtual PC to install and click Install.
Note: The x64 version works with 64-bit versions of Windows 7. The x86 version works with 32-bit versions of Windows 7. To find out if your PC is running 32- or 64-bit Windows 7, click the
Start button , right-click
Computer, and then click Properties. 32-bit and 64-bit information appears next to
System type.
Click Run in your browser's message bar, and follow the instructions on the screen.
Click Yes to install Update for Windows (KB958559).
If you accept the license terms, click I Accept.
After installation is complete, click Restart Now to restart your computer.
To set up Windows XP Mode for first use
Click the Start button , click
All Programs, click Windows Virtual PC, and then click
Windows XP Mode.
<figure class="embedObject"><figcaption class="caption">
Windows Virtual PC and Windows XP in the list of programs </figcaption></figure>
If you accept the license terms, click I accept the license terms, and then click
Next.
On the Installation folder and credentials page, accept the default location where Windows XP Mode files will be stored, or choose a new location.
Type a password, type it again to confirm it, and then click Next.
On the Help protect your computer page, decide whether you want to help protect your computer by turning on automatic updates, and then click
Next.
Click Start Setup.
After setup is complete, Windows XP Mode opens in a separate window.
</QP>
Source & more:
http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft -
Problem installing Analysis Services in Tabular Mode
I am trying to install Analysis Services in Tabular mode to a server where I have already installed Analysis services in Powerpivot mode and in regular mode. I am following the instructions below and when I get to the screen below the tabular mode
option is greyed out. What do I need to do?
http://blog.quasarinc.com/ssas/installing-sql-server-2012-analysis-services-tabular-mode/Hi Racand,
Which editions of SQL Server 2012 you are using? The Tabular option is only available for Enterprise and Business Intelligence editions. Please refer to the link below to see the details.
Features Supported by the Editions of SQL Server 2012
If you have any questions, please point it out.
Regards,
Charlie Liao
TechNet Community Support -
Problem with 3 monitors Intel HD Graphics and GeForce GTX 560
I would like to attach 3 monitors to my box -- 1 to integrated Intel card and 2 to discreet Nvidia. I've tried different configs but I failed to make monitors connected to different cards to work at the same time. I have system with stock kernel, latest updates and the following configuration:
$ lspci | egrep "VGA|Disp"
00:02.0 Display controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
$ pacman -Qi xorg-server xf86-video-intel nvidia awesome-git linux | egrep "Name|Version"
Name : xorg-server
Version : 1.17.1-3
Name : xf86-video-intel
Version : 2.99.917-3
Name : nvidia
Version : 346.47-3
Name : awesome-git
Version : 3.5.2.397.gdde5b1b-1
Name : linux
Version : 3.18.6-1
$ lsmod | egrep 'i915|nvidia'
nvidia 8335766 46
i915 946695 2
button 12953 1 i915
i2c_algo_bit 12744 1 i915
video 18043 2 i915,asus_wmi
drm_kms_helper 80985 1 i915
drm 263481 7 i915,drm_kms_helper,nvidia
i2c_core 50152 6
drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia
intel_gtt 17848 2 i915,intel_agp
I've tried different xorg configs. Here is the best one. All 3 monitors are active with it (I could drag cursor over them) but only 2 (which connected to nvidia card) display DE.
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Option "Monitor-DVI-I-2" "VS"
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia"
Monitor "SAM"
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia"
Monitor "VS"
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "SAM-Screen"
Screen 1 "VS-Screen" RightOf "SAM-Screen"
Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
Option "Xinerama" "0"
EndSection
Also, xrandr shows last monitor (VGA-0, it plugged into Intel card) as disconnected
$ xrandr
Screen 0: minimum 8 x 8, current 3460 x 1440, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected 2560x1440+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
2560x1440 59.95*+
1920x1200 59.88
1920x1080 60.00 50.00
1680x1050 59.95
1600x1200 60.00
1440x900 59.89
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 900x1440+2560+0 left (normal left inverted right x axis y axis) 410mm x 256mm
1440x900 59.89*+ 74.98
1280x1024 75.02 60.02
1280x960 60.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
640x400 70.10
But it's still posible to start application on last monitor with 'env DISPLAY:=0.1 urxvt'
Here is full Xorg log file and highlights:
[ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
[ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
[ 4792.053] (EE) intel(G0): Failed to claim DRM device.
[ 4792.053] (II) UnloadModule: "intel"
[ 4789.342]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 4789.342] X Protocol Version 11, Revision 0
[ 4789.342] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 4789.342] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 4789.342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
[ 4789.342] Build Date: 22 February 2015 12:50:32PM
[ 4789.342]
[ 4789.342] Current version of pixman: 0.32.6
[ 4789.342] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4789.342] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4789.342] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:43:55 2015
[ 4789.342] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4789.342] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4789.342] (==) ServerLayout "Layout0"
[ 4789.342] (**) |-->Screen "SAM-Screen" (0)
[ 4789.342] (**) | |-->Monitor "SAM"
[ 4789.343] (**) | |-->Device "nvidia"
[ 4789.343] (**) |-->Screen "VS-Screen" (1)
[ 4789.343] (**) | |-->Monitor "VS"
[ 4789.343] (**) | |-->Device "nvidia"
[ 4789.343] (**) |-->Screen "BNQ-Screen" (2)
[ 4789.343] (**) | |-->Monitor "BNQ"
[ 4789.343] (**) | |-->Device "intel"
[ 4789.343] (**) Option "Xinerama" "0"
[ 4789.343] (==) Automatically adding devices
[ 4789.343] (==) Automatically enabling devices
[ 4789.343] (==) Automatically adding GPU devices
[ 4789.343] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 4789.343] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4789.343] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4789.343] (II) Loader magic: 0x815d80
[ 4789.343] (II) Module ABI versions:
[ 4789.343] X.Org ANSI C Emulation: 0.4
[ 4789.343] X.Org Video Driver: 19.0
[ 4789.343] X.Org XInput driver : 21.0
[ 4789.343] X.Org Server Extension : 9.0
[ 4789.344] (EE) systemd-logind: failed to get session: PID 10086 does not belong to any known session
[ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4789.347] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4789.347] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4789.347] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4789.347] (II) LoadModule: "glx"
[ 4789.347] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4789.359] (II) Module glx: vendor="NVIDIA Corporation"
[ 4789.359] compiled for 4.0.2, module version = 1.0.0
[ 4789.359] Module class: X.Org Server Extension
[ 4789.359] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 4789.359] (II) LoadModule: "nvidia"
[ 4789.359] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4789.360] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4789.360] compiled for 4.0.2, module version = 1.0.0
[ 4789.360] Module class: X.Org Video Driver
[ 4789.360] (II) LoadModule: "intel"
[ 4789.360] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4789.360] (II) Module intel: vendor="X.Org Foundation"
[ 4789.360] compiled for 1.17.1, module version = 2.99.917
[ 4789.360] Module class: X.Org Video Driver
[ 4789.360] ABI class: X.Org Video Driver, version 19.0
[ 4789.360] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 4789.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4789.360] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4789.360] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 4789.360] (++) using VT number 7
[ 4789.471] (II) Loading sub module "fb"
[ 4789.471] (II) LoadModule: "fb"
[ 4789.471] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4789.471] (II) Module fb: vendor="X.Org Foundation"
[ 4789.471] compiled for 1.17.1, module version = 1.0.0
[ 4789.471] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4789.472] (II) Loading sub module "wfb"
[ 4789.472] (II) LoadModule: "wfb"
[ 4789.472] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4789.472] (II) Module wfb: vendor="X.Org Foundation"
[ 4789.472] compiled for 1.17.1, module version = 1.0.0
[ 4789.472] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4789.472] (II) Loading sub module "ramdac"
[ 4789.472] (II) LoadModule: "ramdac"
[ 4789.472] (II) Module "ramdac" already built-in
[ 4789.473] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 4789.474] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 4789.474] (II) NVIDIA(0): Creating default Display subsection in Screen section
"SAM-Screen" for depth/fbbpp 24/32
[ 4789.474] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4789.474] (==) NVIDIA(0): RGB weight 888
[ 4789.474] (==) NVIDIA(0): Default visual is TrueColor
[ 4789.474] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4789.474] (**) NVIDIA(0): Enabling 2D acceleration
[ 4789.841] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4789.842] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4789.842] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 4789.842] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
[ 4789.842] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4789.875] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4789.875] (--) NVIDIA(0): CRT-0
[ 4789.875] (--) NVIDIA(0): CRT-1
[ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4789.875] (--) NVIDIA(0): DFP-1
[ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
[ 4789.875] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4789.875] (**) NVIDIA(0): Option "Rotate" "left"
[ 4789.875] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4789.875] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4789.875] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4789.875] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.875] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4789.875] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.875] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.875] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.876] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.876] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4789.877] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4789.877] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4789.877] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4789.878] (==) NVIDIA(0):
[ 4789.878] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4789.878] (==) NVIDIA(0): will be used as the requested mode.
[ 4789.878] (==) NVIDIA(0):
[ 4789.878] (II) NVIDIA(0): Validated MetaModes:
[ 4789.878] (II) NVIDIA(0):
[ 4789.878] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
[ 4789.878] (II) NVIDIA(0): Virtual screen size determined to be 3460 x 1440
[ 4789.905] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 4789.905] (--) NVIDIA(0): option
[ 4789.906] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
[ 4789.906] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 4789.906] (II) intel(1): Creating default Display subsection in Screen section
"BNQ-Screen" for depth/fbbpp 24/32
[ 4789.906] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[ 4789.906] (==) intel(1): RGB weight 888
[ 4789.906] (==) intel(1): Default visual is TrueColor
[ 4789.906] (**) intel(1): Option "AccelMethod" "none"
[ 4789.906] (II) intel(1): Output VGA1 using monitor section BNQ
[ 4789.906] (**) intel(1): Option "LeftOf" "SAM"
[ 4789.906] (**) intel(1): Option "Rotate" "left"
[ 4789.906] (II) intel(1): Enabled output VGA1
[ 4789.906] (II) intel(1): Output HDMI1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI1
[ 4789.906] (II) intel(1): Output DP1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP1
[ 4789.906] (II) intel(1): Output HDMI2 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI2
[ 4789.906] (II) intel(1): Output HDMI3 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI3
[ 4789.906] (II) intel(1): Output DP2 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP2
[ 4789.906] (II) intel(1): Output DP3 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP3
[ 4789.906] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
[ 4789.906] (II) intel(1): Output VIRTUAL1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output VIRTUAL1
[ 4789.906] (II) intel(1): EDID for output DP1
[ 4789.906] (II) intel(1): EDID for output DP2
[ 4789.906] (II) intel(1): EDID for output DP3
[ 4789.906] (II) intel(1): EDID for output HDMI1
[ 4789.906] (II) intel(1): EDID for output HDMI2
[ 4789.907] (II) intel(1): EDID for output HDMI3
[ 4789.920] (II) intel(1): EDID for output VGA1
[ 4789.920] (II) intel(1): Manufacturer: BNQ Model: 7659 Serial#: 28
[ 4789.920] (II) intel(1): Year: 2003 Week: 39
[ 4789.920] (II) intel(1): EDID Version: 1.3
[ 4789.920] (II) intel(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 4789.920] (II) intel(1): Sync: Separate Composite
[ 4789.920] (II) intel(1): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 4789.920] (II) intel(1): Gamma: 2.20
[ 4789.920] (II) intel(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 4789.920] (II) intel(1): First detailed timing is preferred mode
[ 4789.920] (II) intel(1): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.611
[ 4789.920] (II) intel(1): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
[ 4789.920] (II) intel(1): Supported established timings:
[ 4789.920] (II) intel(1): 720x400@70Hz
[ 4789.920] (II) intel(1): 640x480@60Hz
[ 4789.920] (II) intel(1): 640x480@67Hz
[ 4789.920] (II) intel(1): 640x480@72Hz
[ 4789.920] (II) intel(1): 640x480@75Hz
[ 4789.920] (II) intel(1): 800x600@56Hz
[ 4789.920] (II) intel(1): 800x600@60Hz
[ 4789.920] (II) intel(1): 800x600@72Hz
[ 4789.920] (II) intel(1): 800x600@75Hz
[ 4789.920] (II) intel(1): 832x624@75Hz
[ 4789.920] (II) intel(1): 1024x768@60Hz
[ 4789.920] (II) intel(1): 1024x768@70Hz
[ 4789.920] (II) intel(1): 1024x768@75Hz
[ 4789.920] (II) intel(1): 1280x1024@75Hz
[ 4789.920] (II) intel(1): 1152x864@75Hz
[ 4789.920] (II) intel(1): Manufacturer's mask: 0
[ 4789.920] (II) intel(1): Supported standard timings:
[ 4789.920] (II) intel(1): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4789.920] (II) intel(1): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993
[ 4789.920] (II) intel(1): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4789.920] (II) intel(1): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
[ 4789.920] (II) intel(1): Supported detailed timing:
[ 4789.920] (II) intel(1): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 4789.920] (II) intel(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 4789.920] (II) intel(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 4789.920] (II) intel(1): Supported detailed timing:
[ 4789.920] (II) intel(1): clock: 25.2 MHz Image Size: 304 x 228 mm
[ 4789.920] (II) intel(1): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
[ 4789.920] (II) intel(1): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
[ 4789.920] (II) intel(1): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[ 4789.920] (II) intel(1): Monitor name: BenQ FP737s
[ 4789.920] (II) intel(1): EDID (in hex):
[ 4789.920] (II) intel(1): 00ffffffffffff0009d159761c000000
[ 4789.920] (II) intel(1): 270d01036c221b78eac6f6a3574a9c23
[ 4789.920] (II) intel(1): 114f54bfef80714f81908180818c0101
[ 4789.920] (II) intel(1): 010101010101302a009851002a403070
[ 4789.920] (II) intel(1): 1300520e1100001ed50980a0205e6310
[ 4789.920] (II) intel(1): 1060520830e41000001a000000fd0038
[ 4789.920] (II) intel(1): 4b1f510e000a202020202020000000fc
[ 4789.920] (II) intel(1): 0042656e51204650373337730a200072
[ 4789.920] (II) intel(1): Printing probed modes for output VGA1
[ 4789.920] (II) intel(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x76.0 141.81 1280 1376 1512 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x72.0 132.84 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[ 4789.920] (II) intel(1): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4789.920] (II) intel(1): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x350"x70.1 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): EDID for output VIRTUAL1
[ 4789.920] (II) intel(1): Output DP1 disconnected
[ 4789.920] (II) intel(1): Output DP2 disconnected
[ 4789.920] (II) intel(1): Output DP3 disconnected
[ 4789.920] (II) intel(1): Output HDMI1 disconnected
[ 4789.920] (II) intel(1): Output HDMI2 disconnected
[ 4789.920] (II) intel(1): Output HDMI3 disconnected
[ 4789.920] (II) intel(1): Output VGA1 connected
[ 4789.920] (II) intel(1): Output VIRTUAL1 disconnected
[ 4789.920] (II) intel(1): Using user preference for initial modes
[ 4789.920] (II) intel(1): Output VGA1 using initial mode 1280x1024
[ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
[ 4789.920] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4789.920] (==) intel(1): TearFree disabled
[ 4789.920] (==) intel(1): DPI set to (96, 96)
[ 4789.920] (II) Loading sub module "dri2"
[ 4789.920] (II) LoadModule: "dri2"
[ 4789.920] (II) Module "dri2" already built-in
[ 4789.920] (II) Loading sub module "present"
[ 4789.920] (II) LoadModule: "present"
[ 4789.920] (II) Module "present" already built-in
[ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
[ 4792.053] (EE) intel(G0): Failed to claim DRM device.
[ 4792.053] (II) UnloadModule: "intel"
[ 4792.053] (--) Depth 24 pixmap format is 32 bpp
[ 4792.053] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 4792.053] (II) NVIDIA: access.
[ 4792.057] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 4792.057] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 4792.057] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 4792.057] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 4792.057] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 4792.057] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 4792.057] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 4792.057] (II) NVIDIA(0): Config Options in the README.
[ 4792.091] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
[ 4792.264] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 4792.264] (==) NVIDIA(0): Backing store enabled
[ 4792.264] (==) NVIDIA(0): Silken mouse enabled
[ 4792.264] (**) NVIDIA(0): DPMS enabled
[ 4792.264] (II) Loading sub module "dri2"
[ 4792.264] (II) LoadModule: "dri2"
[ 4792.264] (II) Module "dri2" already built-in
[ 4792.264] (II) NVIDIA(0): [DRI2] Setup complete
[ 4792.264] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 4792.264] (--) RandR disabled
[ 4792.264] (II) intel(1): SNA initialized with disabled backend
[ 4792.264] (==) intel(1): Backing store enabled
[ 4792.264] (==) intel(1): Silken mouse enabled
[ 4792.264] (II) intel(1): HW Cursor enabled
[ 4792.264] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4792.264] (**) intel(1): DPMS enabled
[ 4792.264] (==) intel(1): display hotplug detection enabled
[ 4792.264] (II) intel(1): Textured video not supported on this hardware
[ 4792.264] (WW) intel(1): loading DRI2 whilst the GPU is wedged.
[ 4792.264] (II) intel(1): [DRI2] Setup complete
[ 4792.264] (II) intel(1): [DRI2] DRI driver: i965
[ 4792.264] (II) intel(1): [DRI2] VDPAU driver: i965
[ 4792.264] (II) intel(1): direct rendering: DRI2 enabled
[ 4792.265] (II) intel(1): hardware support for Present enabled
[ 4792.265] (WW) intel(1): Option "Monitor-VGA-0" is not used
[ 4792.265] (WW) intel(1): Option "LeftOf" is not used
[ 4792.265] (WW) intel(1): Option "Rotate" is not used
[ 4792.265] (--) RandR disabled
[ 4792.268] (II) Initializing extension GLX
[ 4792.268] (II) Indirect GLX disabled.(II) intel(1): switch to mode [email protected] on VGA1 using pipe 0, position (0, 0), rotation left, reflection none
[ 4792.332] (II) intel(1): Setting screen physical size to 270 x 338
[ 4792.386] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4792.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4792.386] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4792.386] (**) Power Button: Applying InputClass "system-keyboard"
[ 4792.386] (II) LoadModule: "libinput"
[ 4792.386] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4792.387] (II) Module libinput: vendor="X.Org Foundation"
[ 4792.387] compiled for 1.17.1, module version = 0.7.0
[ 4792.387] Module class: X.Org XInput Driver
[ 4792.387] ABI class: X.Org XInput driver, version 21.0
[ 4792.387] (II) Using input driver 'libinput' for 'Power Button'
[ 4792.387] (**) Power Button: always reports core events
[ 4792.387] (**) Option "Device" "/dev/input/event2"
[ 4792.387] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4792.387] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4792.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 4792.399] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4792.399] (**) Option "xkb_model" "pc104"
[ 4792.399] (**) Option "xkb_layout" "us,ru"
[ 4792.399] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.432] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4792.432] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4792.432] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 4792.432] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4792.432] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4792.432] (**) Power Button: Applying InputClass "system-keyboard"
[ 4792.432] (II) Using input driver 'libinput' for 'Power Button'
[ 4792.432] (**) Power Button: always reports core events
[ 4792.432] (**) Option "Device" "/dev/input/event1"
[ 4792.433] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 4792.433] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 4792.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 4792.489] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 4792.489] (**) Option "xkb_model" "pc104"
[ 4792.489] (**) Option "xkb_layout" "us,ru"
[ 4792.489] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.490] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 4792.490] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event0)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.491] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 4792.491] (II) No input driver specified, ignoring this device.
[ 4792.491] (II) This device may have been added with another device file.
[ 4792.491] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event3)
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.491] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.491] (**) Option "Device" "/dev/input/event3"
[ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
[ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
[ 4792.554] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:07B2.0004/input/input24/event3"
[ 4792.554] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 8)
[ 4792.554] (**) Option "xkb_model" "pc104"
[ 4792.554] (**) Option "xkb_layout" "us,ru"
[ 4792.554] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
[ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
[ 4792.555] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event4)
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev pointer catchall"
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[ 4792.555] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.555] (**) Option "Device" "/dev/input/event4"
[ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
[ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
[ 4792.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:07B2.0005/input/input25/event4"
[ 4792.610] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 9)
[ 4792.610] (**) Option "AccelerationScheme" "none"
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
[ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
[ 4792.610] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
[ 4792.610] (II) No input driver specified, ignoring this device.
[ 4792.610] (II) This device may have been added with another device file.
[ 4792.611] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event5)
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "joystick catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.611] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.611] (**) Option "Device" "/dev/input/event5"
[ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
[ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
[ 4792.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:045E:07B2.0006/input/input26/event5"
[ 4792.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 10)
[ 4792.676] (**) Option "xkb_model" "pc104"
[ 4792.676] (**) Option "xkb_layout" "us,ru"
[ 4792.676] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
[ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
[ 4792.677] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js0)
[ 4792.677] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[ 4792.679] (II) No input driver specified, ignoring this device.
[ 4792.679] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[ 4792.679] (II) No input driver specified, ignoring this device.
[ 4792.679] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event16)
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 4792.679] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 4792.679] (**) Eee PC WMI hotkeys: always reports core events
[ 4792.679] (**) Option "Device" "/dev/input/event16"
[ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
[ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
[ 4792.712] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input19/event16"
[ 4792.712] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 4792.712] (**) Option "xkb_model" "pc104"
[ 4792.713] (**) Option "xkb_layout" "us,ru"
[ 4792.713] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
[ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
[ 4793.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.050] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.050] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.081] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.081] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.081] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4793.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.129] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.129] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.160] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.160] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.160] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4793.229] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.229] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.229] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.259] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.259] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4849.763] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4849.763] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4849.763] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4849.794] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4849.794] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4849.794] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4849.794] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.794] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4849.794] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.794] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.794] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.795] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.795] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
I also tried other configs, but neither of them made me happy:
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia-sam"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Screen 0
EndSection
Section "Device"
Identifier "nvidia-vs"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-2" "VS"
Screen 1
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
Screen 2
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia-sam"
Monitor "SAM"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia-vs"
Monitor "VS"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "SAM-Screen"
Screen 1 "VS-Screen" RightOf "SAM-Screen"
Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
Option "Xinerama" "0"
EndSection
[ 4488.527]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 4488.527] X Protocol Version 11, Revision 0
[ 4488.527] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 4488.527] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 4488.527] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
[ 4488.527] Build Date: 22 February 2015 12:50:32PM
[ 4488.527]
[ 4488.527] Current version of pixman: 0.32.6
[ 4488.527] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4488.527] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4488.527] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:38:54 2015
[ 4488.527] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4488.527] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4488.528] (==) ServerLayout "Layout0"
[ 4488.528] (**) |-->Screen "SAM-Screen" (0)
[ 4488.528] (**) | |-->Monitor "SAM"
[ 4488.528] (**) | |-->Device "nvidia-sam"
[ 4488.528] (**) |-->Screen "VS-Screen" (1)
[ 4488.528] (**) | |-->Monitor "VS"
[ 4488.528] (**) | |-->Device "nvidia-vs"
[ 4488.528] (**) |-->Screen "BNQ-Screen" (2)
[ 4488.528] (**) | |-->Monitor "BNQ"
[ 4488.528] (**) | |-->Device "intel"
[ 4488.528] (**) Option "Xinerama" "0"
[ 4488.528] (==) Automatically adding devices
[ 4488.528] (==) Automatically enabling devices
[ 4488.528] (==) Automatically adding GPU devices
[ 4488.528] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 4488.528] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4488.528] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4488.528] (II) Loader magic: 0x815d80
[ 4488.528] (II) Module ABI versions:
[ 4488.528] X.Org ANSI C Emulation: 0.4
[ 4488.528] X.Org Video Driver: 19.0
[ 4488.528] X.Org XInput driver : 21.0
[ 4488.528] X.Org Server Extension : 9.0
[ 4488.529] (EE) systemd-logind: failed to get session: PID 32224 does not belong to any known session
[ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4488.531] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4488.531] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4488.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4488.531] (II) LoadModule: "glx"
[ 4488.531] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4488.542] (II) Module glx: vendor="NVIDIA Corporation"
[ 4488.542] compiled for 4.0.2, module version = 1.0.0
[ 4488.542] Module class: X.Org Server Extension
[ 4488.542] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 4488.542] (II) LoadModule: "nvidia"
[ 4488.542] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4488.543] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4488.543] compiled for 4.0.2, module version = 1.0.0
[ 4488.543] Module class: X.Org Video Driver
[ 4488.543] (II) LoadModule: "modesetting"
[ 4488.543] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4488.543] (II) Module modesetting: vendor="X.Org Foundation"
[ 4488.543] compiled for 1.17.1, module version = 1.17.1
[ 4488.543] Module class: X.Org Video Driver
[ 4488.543] ABI class: X.Org Video Driver, version 19.0
[ 4488.543] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 4488.543] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4488.543] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4488.543] (++) using VT number 7
[ 4488.645] (II) Loading sub module "fb"
[ 4488.645] (II) LoadModule: "fb"
[ 4488.645] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4488.645] (II) Module fb: vendor="X.Org Foundation"
[ 4488.646] compiled for 1.17.1, module version = 1.0.0
[ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4488.646] (II) Loading sub module "wfb"
[ 4488.646] (II) LoadModule: "wfb"
[ 4488.646] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4488.646] (II) Module wfb: vendor="X.Org Foundation"
[ 4488.646] compiled for 1.17.1, module version = 1.0.0
[ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4488.646] (II) Loading sub module "ramdac"
[ 4488.646] (II) LoadModule: "ramdac"
[ 4488.646] (II) Module "ramdac" already built-in
[ 4488.647] (II) modeset(2): using drv /dev/dri/card0
[ 4488.647] (II) modeset(G0): using drv /dev/dri/card0
[ 4488.647] (EE) Screen 2 deleted because of no matching config section.
[ 4488.647] (II) UnloadModule: "modesetting"
[ 4488.647] (II) NVIDIA(0): Creating default Display subsection in Screen section
"SAM-Screen" for depth/fbbpp 24/32
[ 4488.647] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4488.647] (==) NVIDIA(0): RGB weight 888
[ 4488.647] (==) NVIDIA(0): Default visual is TrueColor
[ 4488.647] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4488.648] (II) NVIDIA(1): Creating default Display subsection in Screen section
"VS-Screen" for depth/fbbpp 24/32
[ 4488.648] (**) NVIDIA(0): Enabling 2D acceleration
[ 4489.049] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4489.050] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4489.050] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 4489.050] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
[ 4489.050] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4489.082] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4489.082] (--) NVIDIA(0): CRT-0
[ 4489.082] (--) NVIDIA(0): CRT-1
[ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4489.082] (--) NVIDIA(0): DFP-1
[ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
[ 4489.082] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4489.083] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4489.083] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4489.083] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4489.084] (==) NVIDIA(0):
[ 4489.084] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4489.084] (==) NVIDIA(0): will be used as the requested mode.
[ 4489.084] (==) NVIDIA(0):
[ 4489.084] (II) NVIDIA(0): Validated MetaModes:
[ 4489.084] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 4489.084] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[ 4489.113] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 4489.113] (--) NVIDIA(0): option
[ 4489.114] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
[ 4489.114] (==) NVIDIA(1): RGB weight 888
[ 4489.114] (==) NVIDIA(1): Default visual is TrueColor
[ 4489.114] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 4489.114] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4489.114] (--) NVIDIA(1): Memory: 1048576 kBytes
[ 4489.114] (--) NVIDIA(1): VideoBIOS: 70.24.21.00.00
[ 4489.114] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 4489.146] (--) NVIDIA(1): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4489.146] (--) NVIDIA(1): CRT-0
[ 4489.146] (--) NVIDIA(1): CRT-1
[ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4489.146] (--) NVIDIA(1): DFP-1
[ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2) (connected)
[ 4489.146] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): DFP-1: Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4489.146] (**) NVIDIA(1): Option "Rotate" "left"
[ 4489.146] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4489.146] (**) NVIDIA(1): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4489.146] (**) NVIDIA(1): has been enabled on all display devices.)
[ 4489.147] (==) NVIDIA(1):
[ 4489.147] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[ 4489.147] (==) NVIDIA(1): will be used as the requested mode.
[ 4489.147] (==) NVIDIA(1):
[ 4489.147] (II) NVIDIA(1): Validated MetaModes:
[ 4489.147] (II) NVIDIA(1): "DFP-2:nvidia-auto-select{Rotation=90}"
[ 4489.147] (II) NVIDIA(1): Virtual screen size determined to be 900 x 1440
[ 4489.150] (--) NVIDIA(1): DPI set to (55, 140); computed from "UseEdidDpi" X config
[ 4489.150] (--) NVIDIA(1): option
[ 4489.150] (EE)
[ 4489.150] (EE) Backtrace:
[ 4489.151] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 4489.151] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7f64dd88653f]
[ 4489.151] (EE) 2: /usr/lib/xorg-server/Xorg (xf86nameCompare+0x19) [0x4a9159]
[ 4489.151] (EE) 3: /usr/lib/xorg-server/Xorg (xf86findOption+0x2c) [0x4a2c6c]
[ 4489.151] (EE) 4: /usr/lib/xorg-server/Xorg (xf86SetDepthBpp+0x430) [0x4828d0]
[ 4489.151] (EE) 5: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x25e1) [0x7f64d695aab1]
[ 4489.151] (EE) 6: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 4489.151] (EE) 7: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 4489.152] (EE) 8: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f64dd873800]
[ 4489.152] (EE) 9: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 4489.152] (EE) 10: ? (?+0x29) [0x29]
[ 4489.152] (EE)
[ 4489.152] (EE) Segmentation fault at address 0x231
[ 4489.152] (EE)
Fatal server error:
[ 4489.152] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 4489.152] (EE)
[ 4489.152] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4489.152] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4489.152] (EE)
[ 4489.295] (EE) Server terminated with error (1). Closing log file.
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia-sam"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Screen 0
EndSection
Section "Device"
Identifier "nvidia-vs"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-2" "VS"
Screen 1
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
Screen 2
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia-sam"
Monitor "SAM"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia-vs"
Monitor "VS"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
SectionHi:
There is a specific order you need to install the graphics drivers for the notebooks with the nvidia/intel graphics.
1. Install the Intel chipset installation utility and reboot. If the one on your notebook's support page doesn't work, use this one.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816
2. Install the Intel HD graphics driver and reboot. If the one on your notebook's suport page doesn't work, try this one.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24348
3. Install the nVidia HD graphics driver and reboot. If the one on your notebook's support page doesn't work, try this one.
http://www.nvidia.com/download/driverResults.aspx/81879/en-us -
[SOLVED] corrupted display after graphical mode
Hello,
I am new to ArchLinux.
After Installing the system, I followed the instructions on wiki.archlinux.org and managed to launch the graphical mode (xterm and even KDE).
However, it seems that after exiting the graphical mode, my screen is corrupted (I suspect that text console becomes corrupted during launching graphical mode but it is not visible until returning to text mode).
The Linux itself works properly (f.ex. alt+ctrl+del works ok).
I added only exec xterm to the ~/.xinitrc file and I am using MSI netbook with intel graphics card.
I attached two pictures describing the problem:
http://kdiablo.hostit.pl/img/DSC_0045.jpg
http://kdiablo.hostit.pl/img/DSC_0048.jpg
And logs from xorg:
http://kdiablo.hostit.pl/img/Xorg.0.log
I would be very helpful for any help!
Cheers,
KK
Last edited by kdiablo (2014-11-06 21:29:34)I checked my graphics card as you advised.
# lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 0b)
I also found in the netbook's specification that:
CPU: Intel Atom Processor N2800/N2600 Series
Graphics: Intel GMA 3650
I could assume that indeed, https://wiki.archlinux.org/index.php/Intel_GMA3600 would be the proper driver for me.
However, based on information from the website, the kernel version - 3.17.2, and the xorg version - 1.16, I am quite worried if I can try to install these drivers.
Are there any newer versions/similar drivers available?
KK -
Linux Fedora Core 6 : The installer is unable to run in a graphical Mode...
When installing the Sun Java studio Creator 2 Update 1 or the earlier
version I get the message that follow. I would like If anybody can help me.
Thanks!
Message:
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag.
I' ve tried the instalation Issues and Workarounds and I tried to disable the firewall and the SeLinux.
I already installed J2SE JDK 5.0 and NetBeans IDE Software Bundle on this S.O. and I did not have problem with this message.
I can't imagine the cause of this problem!
Thanks!Please have a look at:
http://developers.sun.com/prodtech/javatools/jscreator/reference/docs/2/Installation_ReleaseNotes_2_1-en.html#installationnotes_allplatforms
You can activate logging here to see what's wrong.
My problem was:
/istemp5626075122821/_bundledJRE_/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory java.lang.UnsatisfiedLinkError: /home/hs/istemp5626075122821/_bundledJRE_/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directoryThat means, I had to install the package
libXp-1.0.0-8.i386.rpmfor Fedora 6.
Hope, I could help you! -
Sun 9 x86 - Problems after install
Hi folks,
Finally, I have installed Sun 9 intel - but... it cannot enter graphical mode - usually says: "Desktop mode suspended" and brings me to console mode. Plus it has constant problems - when display blinks. Ocassionally it hangs up and I have to reboot it.
I used "b kadb -v " - it should:
" ata_set_feature: (0x66,0x0) failed"
and also
WARNING: /pci@0,0/pci-ide@1f,1/ ide@0 (ata0):
timeout: abort request, target=0, lun=0
WARNING: /pci@0,0/pci-ide@1f,1/ ide@0 (ata0):
timeout: abort device, target=0, lun=0
WARNING: /pci@0,0/pci-ide@1f,1/ ide@0 (ata0):
timeout: reset target, target=0, lun=0
WARNING: /pci@0,0/pci-ide@1f,1/ ide@0 (ata0):
timeout: reset bus, target=0, lun=0
Could someone say what to do?
Thanks for your help...Here is another group that is moderated by Sun Employees...
http://supportforum.sun.com/cgi-bin/WebX.cgi?[email protected]^0@/os.install.solaris_x86
I realize its an S8 group but it seems to answer some questions....search the forum...here is an extract of a similar issue posted by a Sun Technician...
Try installing the latest revision of patches 108529 and 111307 for ACPI bugfixes. If you are booting from floppy, use the boot image from patch 110930.
From SunSolve FAQ 3307:
SYNOPSIS: How to resolve ACPI conflicts.
DETAIL DESCRIPTION:
ACPI is a new device enumeration method on the Intel architecture. At times
messages noting a conflict of some type may come up:
Warning: resource conflict... both devices are added
NON-ACPI device: ISY0050
Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2
ACPI Device: ISY0050
Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2
This is an example conflict. Many other types are possible. In general,
theses types of problems are caused by hardware problems or a buggy ACPI
implementation.
SOLUTION SUMMARY:
A possible workaround is to disable the kernel ACPI module. If the problem
is happening during installation, the boot floppy must be modified. Mount the
boot floppy and add the following line to bootenv.rc:
setprop acpi-user-options '0x2'
Run the installation again, ACPI should be disabled and the installation
should continue without a problem.
If the problem occurs after installation the same line can be added to
the top of /etc/bootrc and ACPI will be disabled on the next reboot.
Hope this helps..
Lee -
Problem with installing and uninstalling applicati...
hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
AlexYou are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps. -
Fixed graphic mode causes windows freezing dv7
Hello guys,
I have a question about my hp dv7-6b21sm which has i7 2670qm, 8gb of ddr3, 1tb of hdd and a hd6770m graphic card. Now to the problem.
A little ago I've figured that battlefield 3 will not run in fullscreen unless I turn on "Fixed" graphic mode in bios. So that's what I did, switched from dynamic to fixed. And now the problem steps in. Everytime I choose the "fixed" mode, the PC boots into windows and then works for, let's say about 2-3min and then freezes and a reboot is in order. Dynamic mode doesn't do that. I have found no bios upgrades, mine is a version F.02, so I've tried to flash it to F.1b and it is not working. Just says that this driver is not for my dv7.
The next problem I've came across aswell is that if I run the game call of duty 2, the game automatically chooses the Intel hd 3000 although I've set the switchable graphics to High Performance. What the F? Still runs pretty smooth but I can't keep it with constant 250 fps ingame (don't ask why, a matter of being used to playing at that framerate).
The third problem looks like it is some sort of a "Standard" for HP. Overheating. My god. I'm playing skyrim on lowest settings and my gpu idles at about 50°C when under load, it jumps up to about 80°C. Is that like normal for HP notebooks? I remember playing it on my brothers ASUS and his max temps were about 60°C in a high mode, with same specs as my HP only graphics were Nvidia gt555m.
Oh and just remember the 4th problem. Youtube HD videos. Why is it that if I watch a HD video ripped from blu-ray, the picture is clean and sharp and colorful. Even Vimeo works like a charm on this machine for watching HD videos. Now when I go to youtube, play a video in 720p or 1080p or even Original quality, and put it to fullscreen, everything becomes square-like and choppy and graphics look like they are 240p stretched to full screen. I mean seriously HP...Is it that hard to make something with a little more quality to it? I've payed like 1000eur for this machine. For that money I would expect that it'd be working like charm.
Thank you for your replys guys,
zitnikpOverheating is commonly reported in HP notebooks during intensive tasks like gaming. 80 degrees seems suspiciously high for gpu temps, are your sure you didnt mix this with your CPU temp. I have similar specs except with 1gb of vga memory and can normally play Skyrim at high settings at 1366x768 res, temperatures for my cpu can range from 60s to 70s but my gpu rarely goes past 70 degrees. If you set HP coolsense to 'coolest mode' this should solve your problem. As for your graphics problem, have you tried updating to latest amd drivers? 8.882.2.3xxx should be latest
-
Problem with install on new compy, something to do with external?
Hello, so I have been having a few problems with installing Arch on my new computer. On my old laptop I never ran into this problem on any distro of LINUX I installed, nor on any other of the systems I have installed Arch on. I believe it might have something to do with the fact that I am running the live cd off of an external dvd drive maybe? I am kind of stuck here, so any help would be greatly appreciated! Thanks!
If it helps
System Specs:
Motherboard: ASROCK 890FX Deluxe3
Processor: AMD Phenom II X4 955
Graphics Card: ATI Radeon HD 5700 Series
Hard Drives: 2 SATA 160gb hd RAID 0, and one 160gb ATA hd
OS: Windows 7 Professional on the RAID 0, hoping to put ARCH on the ATA (I have tried booting the ATA first in the list behind the USB DVDROM to no avail)
External Drive: Sony DVD/CD RW drive DRX-510UL
External DVDROM is the exact same drive I used to install windows 7 professional.
External DVDROM is plugged into one of my USB 2.0 ports, but the error still persists.
I am using the EXACT same disk I used when installing it on my past computer.
Trying to install x86_64 version of Arch, gets past the splash.
Output that I could catch:
:: Running Hook [archiso]
:: Rinning Hook [archiso_pxe_nbd]
:: Mounting tmpfs, size 75%... done.
:: Waiting for boot device...
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201005 ...
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : new full speed USB device using ohci_hcd and address 3
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : new full speed USB device using ohci_hcd and address 4
usb 9-1: device not accepting address 4, error -62
usb 9-1 : new full speed USB device using ohci_hcd and address 5
usb 9-1: device not accepting address 5, error -62
hub 9-0:1.0: unable to enumerate USB device on port 1
scsi 6:0:0:0: CDROM SONY DVDRW DRU-510A 1.0d PQ: 0 ANSI: 0
scsi 6:0:0:0: Attached scsi generic sg3 type 5
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
ERROR: boot device didn't show up after 30 seconds...
Falling back to interactive prompt
You can try to fix the problem manually, log out when you are finished
/bin/sh: can't access tty; job control turned off
If you need any other info, I can grab it of course.
Last edited by crusniknano (2010-07-12 19:49:13)K, got it running. was having errors with the USB hd, but just changed the name it booted from to the name of the drive. thanks!
Maybe you are looking for
-
Can not get the Cisco TSP to show UP - 2003 64bit
Can not get the Cisco TSP to show up on the list of Providers in Phone and Modem Options- Advance tab. Installed ver. 4.1, it seems to install correctly, with no errors but when I restart the server, there is no Cisco TSP001.tsp in the providers list
-
Loaded os maverick now can't open xls file
I just updated OS Maverick and now can't open xls files - any idea?
-
Why is mountain lion not coming to my iMac?
Hi I'm new to the community but have been with apple for a long time. I current own a late 2006 iMac and am trying to wrap my brain around why Mountain Lion isn't supported on the model? I have recently updated the mac's RAM to 3GB and purchased OS L
-
Problem with some features after changing memory c...
My N2690 cannot work with 2GB. Right now most of the functions like; Ovi, Life tools, Web browser is refusing to open. Community Manager note: this post has been removed from an unrelated thread and the subject line changed to reflect the nature of t
-
Is it possible to upgrade BIOS without Windows installed - Satellie L30
I don't have WIndows installed on my Toshiba Satellite PSL33E. Does it possible to create boot CD to upgrade BIOS on my notebook ?