Problem to install a cube

Hi Guys,
I'm trying to install a Cube from the nbusiness content and the next error is raised : Higher-level of 0RPM_OLGUID__0SOURSYSTEM for infoobject 0RPM_OLGUID_0COORDER is not contained.
Thanks,
I.

Hi Ivan;
The best way to install the BC cube is..first find out what are the componenets the cube has like InfoObjects, transfer rules, update rules..go to RSA1>transport connection> under the grouping you will have 5 options where you will decide before, after, only necessary or before and after components. If you will not be using the content queries then do only 'In dataflow before' option. It will help you to reduce the chances of getting errors.
In your case, I don't know which cube you are trying to install it seems like you are missing some dependencies for infoObject '0RPM_OLGUID_0COORDER'. So, What I would do it before the installation of the cube, just install for that specific InfoObject and install the cube later.
Hope this helps you.
Buddhi

Similar Messages

Data problem from DSO to cube

hi
i am facing data from problem from dso to cube
i am getting daat into dso
plant   material doc_num itemno qty
p1      m1           1              1         10
p1      m1           1               2         20
dso i am uisng key fields
doc_no
item_no
doc_year
data fields
material
plant
qty
while loading data into cube
its showing only
p1 m1 1 2 20
item 1 is missing
there is no iten num filed in my target field?
ple let me know ur idea.

Hi,
The problem is in your ODS/DSO.
In your ODS you have 'Doc_num' as key field.
For both Items 1 & 2, you have same key field ( Doc_Num) Value.
So, the first record will be over written by the second one. So from your ODS you will get only the latest record to the Cube.
If you want to send both doc_nums to cube, you need to bring doc_num to the data fields area of ODS.
Hope this helps.
Cheers
Praveen

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Problem with installing patch SP1b

Hello All,
I have a development server running on XP pro with live cycle 8.0.1. I 'm facing a problem while installing patch SP1b to that server. I have attached the log file.
My problem is
I copied a process' .lca file from a server running on windows server 2003 with patch installed and deployed on the development server. Now in my development XP box, workspace is opening but when i tried to open the process, before rendering the pdf form it is giving "An error occurred during the operation (endpoint id 401). (ALC-WKS-007-027)" error. I have even crosschecked the input xfaform variable also; every thing is perfect. The details are as below:
The Server from which i copied is: (windows server 2003)
License Type: Full Version: 8.0.1
Patch Version: SP1b
Expired Date: Not Applicable
Installed Components
Product
Version
Patch
License Type
LiveCycle Process Management ES
8.0.1
SP1b
Full
LiveCycle Forms ES
8.0.1
SP1b
Full
The server to which i deployed is: (xp pro)
License Type: Full Version: 8.0.1
Patch Version:
Expired Date: Not Applicable
Installed Components
Product
Version
Patch
License Type
LiveCycle Process Management ES
8.0.1
Full
LiveCycle Business Activity Monitoring ES
8.0.1
Full
LiveCycle Forms ES
8.0.1
Full
Will that patch version could be the problem? What could be the problem and what is the solution?
Thanks
Deepak

Anybody knows the answer?

Problem with installing iTunes

So these are my problems with installing iTunes.
At first it was :
A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
Then it got worse as it would not even open and these would appear:
The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
and this would appear:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I reinstalled maybe about 5 times or more...
If I thought I solved the above problem, this would appear:
iTunesHelper.exe is not installed on my computer.
I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
And others would say to repair the AAS or iTunes etc..
And after trying all these it does not work???
What else works?

I also tried repairing the Microsoft NET.

Problem with Installing the Oracle8i PO into Windows ME

I think I have the same problem as some of you had. Recently, I bought the Oracle Book and it has 3 discs: 1 for Oracle Developer 6 for Win 95 or 98, 1 for Oracle 8i PO (release 8.1.5) for Win 95, also 1 for Win 98.
My computer had no problem when I installed the Or. Developer. However, my computer won't allow me to install the Oracle 8i PO Win 98 disc. Instead of that, I have no problem of installing the Oracle 8i PO Win 95 disc. After I installed the Win 95 disc with all correct configuration according to the instructions, I can not CONNECT to the database. So, is this mean the Windows ME is compatible with the Win 95 disc? Or my computer is "screw up"? Because I know Win Me is very much the same as Win 98. If I installed the Win 98 disc, it should be ok. Anyway, I installed the Win 95 disc successful, but can not CONNECT.
So if anyone can help me out, or need a specific error message, I will post up next time. For now, I think I already gave you guys a "head-ache"... sorry.... Thanks all! Wait for your helps guys!

What drivers are you attempting to install?
- Peter

Problem with Installing Nokia Ovi Store in E51

I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button"

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

What is the problem in installing 8.1.7 on Linux

Hi
I have seen a lot of posts discussing about
problem in installing 8.1.7 on rh Linux 7.
Can anyone tell me what is the actual problem, and do I need to download any patches to resolve it ?
pam

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by pam:
Hi
I have seen a lot of posts discussing about
problem in installing 8.1.7 on rh Linux 7.
Can anyone tell me what is the actual problem, and do I need to download any patches to resolve it ?
pam<HR></BLOCKQUOTE>
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>I hava a problem in ORACLE_SID variable during installation<HR></BLOCKQUOTE>
null

Problem while installing CS6, Please Help

Hello everyone, I almost search every help available around the internet for my problem and can't figure that out. Hope you guys might had better knowledge about that. I am facing a problem while installing Photoshop CS6 version and I already deleted my previous version and I am receiving the pop of "LOW COMPATIBILITY". Please tell me what might be the problems and the way to get out of this situation so that I can continue doing work for my deals site dealaboo.

Hi,
Please share your system configuration on which you are trying to install Ps CS6.
Regards,
Ashutosh
Ps Installer QE

Problems with installing HP OfficeJet Pro L7590 driver All-in-One

Hello HP team.
Having problem with installing driver for HP Officejet pro L7590.
Starting the process the process bar goes to the end 100% and then disappear.
After that nothing happens.
Rebooting doesn't help.
Windows 7-64

Thanks for getting back to me!
Lets try some more steps:
Uninstall, level 3 for HP PC or level 4 for non-HP PC.
1. Click Start and type %temp% in the run field and click OK.
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC
6. When the uninstall has completed restart the computer
Try to install again using the HP Printer Install Wizard for Windows
Let me know how this goes please
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem to install a cube

Similar Messages

Maybe you are looking for