Problem to install Directory Server 5.1 SP2 on Solaris

Hi
I need to install Directory Server 5.1 SP2 on Solaris 8. When I was asked to provide system user and system group, I provide "root" and "system". As a result, the installation fail message was shown and abort the installation.
However, I was install the Directory Server 5.1 SP1 on solaris 8 successfully by using "root" and "system". Does anybody know why?
Thanks and Regards,
William Siu

But i've more than 2 Go of free disk space !!!!
"Tim Muratet" <[email protected]> wrote:
>
Sure...Get more disk space.
"coolys" <[email protected]> wrote in message
news:3a252a26$[email protected]..
hi,when i decompress the weblogic510.exe file under NT, in the end of theself extracting i have the message below :"The decompression of %s failed.
there may not be enough free disk space available in the TEMP"Can anybody
help to resolve this problems.thanks for yours reponses.

Similar Messages

Replication problem with iPlanet directory server 5.1 SP2 HF1

If I make a apply a change to either of consumer servers for an entry that belongs to the large database, that change does get applied to the consumer targated but it can not refer the change to teh master. Neither the master, nor the other consumers get updated consequently. I did not have this problem with directory server 5.1 SP1. I only see this problem after I apply directory server 5.1 SP2 HF1.
From the error log file, I see the following message:
NSMMReplicationPlugin - repl_set_mtn_referrals: could not set referrals for replica

I have a suggestion - try another means for administering your directory - use the console only for maintenance and tuning purposes. There are several products out there that are much better for day to day operations ...
Otherwise - I think with 5.1 the view is based on the rdn of the entries - and I am not sure it is customizable. Additionally I know 5.2 solved your second issue - maybe the latest SP of 5.1 has solved it as well - though I don't really know ...
-Chris Larivee

Error while installing SQL Server 2012 X64 SP2,

Error while installing SQL Server 2012 X64 SP2,
When I installed the SQL Server 2012 X64 SP1, I got the attached error.
What might be the issue here?
Thank you
Best
Jamal

Hello,
Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to install owb server-side software on UNIX Solaris (SPACR-64)?

Hi there,
How to install owb server-side software on UNIX Solaris (SPACR-64)?
I've read the install guide
and it mentions
3. Start the installer by entering the following at the prompt:
cd mount_point
./runInstaller
I don't have access to any graphical interface on the UNIX box e.g. x-windows nor any cd with the software, just the solaris software downloaded from web - does this include the runinstaller
and is the runisnatller just a command line interface?
I hoped I would be able to download the software from oracle website and then simply run the a setup scrip?
Is it possible to do this? Would I simply substitute cd mount_point to cd <directory I put software)
I've never ran oracle universall installer on UNIX before.
Many Thanks
Edited by: user575470 on Feb 15, 2009 7:54 AM
Edited by: user575470 on Feb 15, 2009 8:06 AM

Hi,
You can install the server-side software from the downloaded software.
You don't need the CD
You do need an X-windows client on your computer to connect to the server OR work directly on the server.
Without X-windows you cannot start the Oracle Universal Installer.
Maybe there is a command line installation, I have never used this.
I hope this helps.
Regards,
Emile

Problem in installing Directory Proxy server

Hi all! Recently downloaded the trial version of sun one directory proxy server. After installing the sun one DS 5.2 . I tried to install sun one proxy server..when it asks for configuration server information i have given the admin id and password ....
but it gave me following error message
"The given Administrator Id/password combination was not accepted by the
Configuration Directory Server.
The Sun ONE configuration directory administrator is the ID typically used to
log in to the console."
I did used the same id and password to login to console & i am able to log in.
Please advice.

Two quick hints.
First off, instead of hitting <Enter> to accept the default for the username [admin], type "admin" (without the quotes) as if you were giving different credentials. There's a known issue during the installation where the default text doesn't work.
Additionally, I had to change my admin password in the configuration directory to cleartext in order to get it to work. For some reason the password encryption during the bind was never successful. To do that:
dn: uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot
changetype: modify
replace: userPassword
userPassword: {CLEAR}password
I have no idea if this addresses the problem itself or just a symptom, but it did allow me to install DPS. You might want to give it a shot.

How to install directory server/client on Solaris 9 for dummys

Hi,
after reading hunderts of pages, after asking questions in forums without getting the right answers, i was able to install the directory server in our company.
Here is the summary i made for myself. Perhaps it helps others to avoid the same problems.
Set up a Directory Server (sun one ds 5.1)
Present situation:
-Nisplus is installed
-Solaris OS 9 sparc 64bit is installed
-DS5 Software is normally already installed in Solaris 9. Check off with 'pkginfo | grep IPLT*'
-Otherwise install from Solaris OS 9 Disc1 with 'pkgadd -d IPLTxxxx .'
-Software setup with '/usr/sbin/directoryserver setup'
     Install admin- and directory server.
     For Directory Server use port 389 (necessary for later use of SSL)
     For Admin Server use any empty port > 1024
     Run directoryserver as root (necessary for using port 389 and for -starting servers from console)
     Use default Directory Manager DN cn=Directory manager
     Use your domain as DIT (default information tree) example: dc=example, dc=com
     As second DIT, setup installs o=NetscapeRoot. Don't change this DIT at all!!!!!
The server stores all the default schemas there which are absolutely important for the directoy
server. Don't change anything there !
-Configure software with 'idsconfig'
     Preferred - and default server xxx.xxx.xxx.xxx (ip_adds of your directory server)
     Use default search scope one
     Use credential's Proxy
     Use authentication Simple (you may change this later if needed)
     All the rest should remain on default settings
     You will be asked for a proxy passwort
-Start the directoryserver console with '/usr/sbin/directoryserver startconsole'
-If it's not yet running, start the directory server from console or with command 'directoryserver -s instance_name start'
-If it's not yet running, start the admin server from console or with command 'directoyserver start-admin'
-On directoryserver's gui at configuraton/password set password encryption to 'unix crypt algorithm (CRYPT)'
Import Data
-Get Data from Nisplus with
     'niscat passwd.org_dir passwd.ldap'
     'niscat hosts.org_dir hosts.ldap'
     'niscat groups.org_dir groups.ldap'
     etc
-adjust the files. (try it out with one entry of a file only. You may delete this entry with the gui very easy if it's not successfull.
-hosts.ldap must look like
xxx.xxx.xxx.xxx machine1
xxx.xxx.xxx.xxx machine2
xxx.xxx.xxx.xxx machine3
     First value is the ip-address, second one is the hostname.
     If you have more than one hostname per machine, use a second line (don't write 2 names behind the ip-address like you did in nisplus!!!)
Change content of files into ldif format
-perl migrate_hosts.pl hosts.ldap hosts.ldif
-perl migrate passwd.pl passwd.ldap passwd.ldif
-You may download the above perl-Files from http://www.padl.com
Change the converted passwd.ldif File as follows:
-before change:
dn: uid=mario,ou=People,dc=krinfo,dc=ch
uid: mario
cn: mario
objectClass: account
objectClass: posixAccount
objectClass: top
userPassword: {crypt}6O9m3uK./T/rM
loginShell: /bin/bash
uidNumber: 1020
gidNumber: 14
homeDirectory: /home/mario
-after change:
dn: uid=mario,ou=People,dc=krinfo,dc=ch
uid: mario
cn: mario
objectClass: account
objectClass: posixAccount
objectClass: shadowAccount <--- this line must be inserted
objectClass: top
userPassword: {crypt}6O9m3uK./T/rM
loginShell: /bin/bash
uidNumber: 1020
gidNumber: 14
homeDirectory: /home/mario
Insert the line for every entry in the passwd.ldif file
You may now import all these xxxx.ldif files into the directory server with
-ldapadd -h name_of_directoryserver -D "cn=Directory Manager" -w password -f XXXXX.ldif
You may use this commands later to import further data.
-Initialise a client
'ldapclient -a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=com init xxx.xxx.xxx.xxx'
The xxx.xxx.xxx.xxx at the end is the ip address of the directory server
-This will make a client with data taken from the default profile from the directory server. This profile has been produced with the earlier command idsconfig and can be changed if needed.
-The System will ask you for the proxy password (given the first time in idsconfig dialog)
-You may now look at the produces files
in '/var/ldap/ldap_client_file' for the client settings
in '/var/ldap/ldap_client_cred' for the proxy settings
'ldapclient list' shows the settings of the client
With 'ldaplist -h' you may see all the existing entries with their objects.
Activate the client
-If it's not yet running, start '/usr/lib/ldap/ldap_cachemgr'
-All nisplus daemons/programs have been stopped by ldapclient command. If not, stop them manually.
-/etc/nsswitch.conf should have been copied from /etc/nsswitch.ldap from ldapclient too.
-If not, do it manually.
example
passwd: files ldap
group: files ldap
hosts ldap dns files
etc
I recommend to change the file '/etc/nsswitch.ldap' because the system oftens copies nsswitch.ldap to nsswitch.conf and if nsswitch.ldap is adapted, you must now change it again and again.
you may now check whether ldap is working fine with the following requests:
getent passwd username
getent hosts hostname
getent groups
getent network
These commands should give you the requested answer.
Be sure to clean:
/etc/hosts      inside is only your workstation and the directory server
/etc/passwd     only default and local entries
/etc/groups only default and local entries
etc
try a telnet to your own machine to check, whether password and automount of your home_dirctory works fine.
I failed here. All was working fine, but the password exchange did not because of credential/authentication problems.
Best regards and good luck
Mario

Directory Server 5.1 does not support Kerberos authentication.
Beside this there are some extensions in MS kerberos authentication that makes it almost impossible to have a MS client authenticate with something else than AD.
Regards,
Ludovic.

Getting problem while installing Sql Server 2012

I am using Windows 8 in my system. I am trying to install Sql Server 2012 in my system .
But i am getting following error in the final.
The required MSI package 'D:\SQL Server 2012\x86\setup\sql_engine_core_shared_msi' doesn't exist.
Please, help me quickly.

Hi，
You post same question 3 times. Please avoid this practice on Forum, I
have merged the same thread into this thread . Thanks for your understanding.
In addition, as other post, you can copy the missing .msi file from the complete and unbroken installation media to your MSI package path. Then run as administrator again. And also check if your account has read and write permission for your installation
media saving path. If the error still exists, you can check the SQL setup logs (Detail.txt and summary.txt) for analysis.
There is similar issue about installing SQL Server failed due to miss the required MSI package.
http://social.msdn.microsoft.com/Forums/en-US/2aa6136b-9ccd-4c97-a6d3-cbe408c38228/sql-server-2008-service-pack-1-installation-problem
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

I am not able to install sql server 2008 r2 sp2

hi,
I have installed sql server 2008 r2 rtm and want to update to sp2 and have installed sp2 from microsoft website and then i installed CU1 for sp2. All installation did successfully but still it is not showing the updated version info.I am checking the
version info from Help>About. Please tell me what to do next?
Thanks and regards.

Hello,
Please run the discovery report. Maybe you have more than one instance of SQL Server installed on that computer and you updated just one of them. Make sure you click to select all the instances shown on the “Select Features” page of SQL Server setup.
http://learnsqlwithbru.com/2012/01/04/installing-sql-server-2008-service-pack-3-on-multiple-instances/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Installation/Config Problem with Sun Directory Server Control Center (6.0)

Hi All,
I have recently attempted an installation of Sun Directory Server EE 6.0 on a x86 Solaris 10 machine.
I have selected to install Core Directory Server and Sun Directory Server Control Center with my installation.
After installation, if I check the status of the SUNDSCC, I receive the following message:
bash-3.00# ./dsccsetup status
DSCC Application is not installed
DSCC Agent is registered in Cacao
DSCC Registry has been created
Path of DSCC registry is /var/opt/SUNWdsee/dscc6/dcc/ads
Port of DSCC registry is 3998
I have also tried to re-start the Sun Java Web Console using the /usr/sbin/smcwebserver start command but that does not do anything.
If i try to initialize the SUNDSCC usin the ./dsccsetup initialize command, the registry got created, but it still displays as "application not installed".
I do not understand. I have already installed this application using the JES installer.
please help!
Regards,
Saahil Goel

I had a similar issue. Here is how I fixed it.
Run dsccsetup status with the -v option. it will show you where it is trying to find the DSCC Application. Then do a find on your system to see where it is actually installed. Then simply copy it over to where dsccsetup is looking for it. Then do dsccsetup initialize. Below is what it looked like on my system when I did it:
# ./dsccsetup status -v
## /usr/sbin/smreg is present
## /usr/sbin/smcwebserver is present
## /opt/server/sun/dscc6/dccapp is MISSING
DSCC Application is not installed
## /opt/sun/cacao/bin/cacaoadm is present
## /opt/server/sun/dscc6/lib/jar/nquickmodule.jar is present
## Running /opt/sun/cacao/bin/cacaoadm list-modules -r
DSCC Agent is registered in Cacao
## Running /opt/sun/cacao/bin/cacaoadm status
## Running /opt/sun/cacao/bin/cacaoadm list-modules
## Running /opt/sun/cacao/bin/cacaoadm get-param network-bind-address
## Running /opt/sun/cacao/bin/cacaoadm get-param jmxmp-connector-port
## /opt/server/sun/ds6/bin/dsadm is present
DSCC Registry has been created
Path of DSCC registry is /var/opt/sun/dscc6/dcc/ads
Port of DSCC registry is 3998
# find / -name dccapp
/opt/server/dscc6/dccapp
# cp -R /opt/server/dscc6 /opt/server/sun
# ./dsccsetup dismantle
DSCC Application is not registered in Sun Java(TM) Web Console
Unregistering DSCC Agent from Cacao...
Deleting DSCC Registry...
All server registrations will be definitively erased.
Existing server instances will not be modified.
Do you really want to delete the DSCC Registry ? [y/n]y
Server stopped
DSCC Registry has been deleted successfully
# ./dsccsetup initialize
Registering DSCC Application in Sun Java(TM) Web Console
This operation is going to stop Sun Java(TM) Web Console.
Do you want to continue ? [y,n] y
Stopping Sun Java(TM) Web Console...
Registration is on-going. Please wait...
DSCC is registered in Sun Java(TM) Web Console
Restarting Sun Java(TM) Web Console
Please wait : this may take several seconds...
Sun Java(TM) Web Console restarted successfully
Registering DSCC Agent in Cacao...
Checking Cacao status...
Deploying DSCC agent in Cacao...
DSCC agent has been successfully registered in Cacao.
Choose password for Directory Service Manager:
Confirm password for Directory Service Manager:
Creating DSCC registry...
DSCC Registry has been created successfully
Hope this helps.

Installing SQL Server 2008 R2 SP2 CU 13

Hi,
For one of SQL Server instances the current version is 10.50.4033(SQL Server 2008 R2 SP2 GDR).
Now I am not able to install a cumulative upgrade "2967540 Cumulative update package 13 (CU13)".
"There are no SQL Server instances or shared features that can be updated on this computer"
Is there any patch that I am missing?
Suman

Hello,
You may get this error when you download the 32-bit version of the update (x86) and you are trying to apply it to a 64-bit
instance of SQL Server.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Monioring iplanet Directory server 5.1 SP2 via SNMP

Hi ,
I try to monitor my directory server by using snmp on solaris8 sparc server .
All thing look ok , but when i restart or start the master subagent via the console admin server i've got the error message
" An error occured when starting SNMP subagent. Check that the configuration data you entered is correct and that the SNMP master is running"
Did sommeon have an idea to solve this problem
Best regards

i did not understand the concept of disable in NetscapeRoot as u said "Accidentally,we had disbled the NetscapeRoot suffix through the iPlanet Dir sever console ". Dou mind explain a little bit about how you did it?
One option is export the o=NetscapeRoot into a ldif file, after re-build your directories, import o=NetscapeRoot whics ever is necessay ,"do not export every thing".

Re-install directory server on windows

Hello all,
Yesterday I downloaded and tried to install the directory server on my laptop (to try to duplicate our production system for local development). However, during the installation process, I entered a wrong value for my hostname and the slapd didnt start up properly. When I saw that message I abonded the installation, looked up the correct values and tried to re-install.
However, as with the re-install on linux thread, I couldnt pick any component anymore. I removed the directory where the directory server was installed, tried to remove all the keys from the registry, removed the extracted setup directory but even then, I still could not reinstall anything.
Only thing weird was that the Sun ONE directory service was still visible in my list of services, even after I had stopped it, disabled it, removed the keys from the registry and removed the directory. Only key that still had the Sun ONE value in it was a legacy-slapd key, and that key I could not delete.
Any pointers how I should re-install the directory server?
Gr
Ronald

You did not mention the Windows OS version and DS version. If you intend to use DS5.2, please install Windows JDK 1.5.X proir to running the "setup.exe".
I assume you have read the Release Notes.
http://docs.sun.com/source/816-6703-10/index.html#wp27466
And noted:
===
# Microsoft Windows 2000 Server and Advanced Server SP 3 (IA-32)
Directory Server 5.2 has also been validated with Windows 2000 Service Pack 4.
# Microsoft Windows Server 2003 Enterprise Edition (IA-32)
The original release of Directory Server 5.2 has not been validated on Microsoft Windows Server 2003 Enterprise Edition. Only the compressed archive update (patchzip) is validated on this platform.
===
Your abort action might have caused the installation to become "inconsistent" so running "uninstall.exe" (in the setup directory?) may not help, anyway if you have not run :uninstall.exe" please give it a try.
See related post, not sure those info there would help you.
http://swforum.sun.com/jive/thread.jspa?threadID=54700&messageID=209308#209308
For Linux version of DS5.2 install/config, you may find "re-install" tips in my HOW-TOs useful, or not at all.
http://web.singnet.com.sg/~garyttt/
Gary

RE: Installation of Certificates in directory Server 5.1 SP2 HF2

Guys,
I am trying to setup SSL on a new directory instance. The instance itself has been up and running for a while but when trying to either copy and paste the cert block into the wizard or pointing the wizard to a file I get the following error:-
[02/Aug/2004:13:59:15] failure ( 5998): for host 10.x.x.x trying to POST /admin-serv/tasks/configuration/SecurityOp, cgi-parse-output reports: the CGI program /opt/iplanet/ukmonmonXXX/bin/admin/admin/bin/security did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
Anyone have any ideas?
Thanks
og

Hi, We just had this same problem and used the certutil utility to insert the certificate into the database. After we did this, all was fine with the wizard! Sorry, don't have the actual syntax, but it is in the Directory Server administration guide documentation.

Problem with Sun Directory Server 6.0 Console

Hi,
I posted same onto wrong forum earlier hope I am in correct place :).
I have installed Sun Directory server on my Sparc box and now I am unable to start the management console. I followed some instruction on net and it say we have to refister the product using folowing command from dscc6/bin folder for installation
System SnapShot_
# ./dsccsetup initialize
DSCC Application is already registered
DSCC Agent is already registered
Choose password for Directory Service Manager:
Confirm password for Directory Service Manager:
Creating DSCC registry...
DSCC Registry has been created successfully
*and it suppose to be started on https://Ip_address:6789 but its not. Can any one please tell me how to start the admn console to manage my directory server effectively.
Note: I have already started the instance I have created during the installation using slapd-start script and its running successfully.
Thanks,
Sheeraz

NOOOOO :( ..... Now i can see the login page.,.. Thanks mate.... Now when I am trying to log in using the UserName and Password I have supplied during the installation process (Sun Directory Server) it says Authentication failed.????
This looks like a general webconsole... do I need to provide an specific URL for diretory server page ?????

Error trying to install Directory Server on Linux - pls help

I get a silly error loop when trying to install the Directory Server 5.2 on a Fedora Core 4 box.
I do a ./directoryserver configure to configure the directory server, and it ran for a bit and then error'ed out in the middle, but most of the install said it was successful.
I try to do a ./directoryserver start and it says Directory Server 5.2 is not configured.
Use:
'/opt/sun/sbin/directoryserver -u 5.2 configure' to configure Directory Server 5.2.I then try to run ./directoryserver configure again, and it says,
An instance of Directory Server has already been configured The current
configuration will not be removed or replacedWhere is this configuration kept, and how do I just manually edit it or delete it? It's blocking my being able to get the Sun App server up, so I need any help I can get.
Thanks much,
--Tad
Church of Scientology
http://www.scientology-washingtondc.org

Gary -
Thanks much.
Do I now have to rpm -e the packages that I have already installed on the system in order for this clean install to work? I attempted removing all of the product registry files and so forth, but on re-install the installer program insists that the pgm is still installed on the system. Slapd is definitely not running (and never was on this system) so that isn't the issue.
I'm thinking perhaps just rpm -e'ing all of the sun-related RPMs that came onto the server and starting over. Better idea?
-- Tad
System Administrator
Church of Scientology
http://www.scientology-washingtondc.org

Problem to install Directory Server 5.1 SP2 on Solaris

Similar Messages

Maybe you are looking for