Problem to install driver of sound card

Hi, i have a motherboard P4 socket 775 model 915 p Combo, i update last Bios 1.4 and i can't install a driver.
Please help me..
Thank's

Ok, i've
MB: 915P Combo , bios last version v1.4
Sound Card on Board: CMedia CMI9880L
Video card PCI expres: MSI Ati RX6000
Memory DDR2 Kistong
Os: Windows XP Pro.
Problem: In Windows, a new device was found, when i try to put a driver come from a CD- come with motherboard ( C-media CMI988L ). The message say ( no device found). I downlaod a last test driver in a site ( MSI )
C-Media Azalia Audio Drivers
Support model    All MSI MB with onboard C-Media CMI9880L audio codec controller.
Description    • New Support C-Media CMI9880L Codec
• Driver version:
WinXP: 5.12.01.0008.50
Win2000: 5.12.01.0007.36
Date    2004-12-7
Your System OS    2000/XP(33745KB
error , no device was found.
++++++++++++++++++++++++++
I check a chip on MB, it is a Cmi988L. what can i do ???
Thank's

Similar Messages

HT3964 I had Problem in Optical Drive Open Sound When I Open My Imac

I had Problem in Optical Drive Open Sound When I Open My Imac

You need to supply more details and information about your issue...
Any Error messages or Alerts...
What Troubleshooting steps have you tried and what were the results.

Missing files on installing driver for Sound Blaster Adio PCI 64v on win 9

I've downloaded and run the file 373UP.exe. Then I got the message: Missing file eapci4m.ecw. So, I can't install the driver!!!
Wher can I find this file?
With tanks.
P.S. I li've in Belgium, I'm dutch speaking and I bought in 999 a pentium 2 computer of Packard-Bell. Now I've installed win 98 SE and I needed the driver for my sound card!

jorisvh,
This knowledgebase case should cover how to load the wavesets (*.ecw).
Cat

New install not detecting sound card

My system is not detecting my sound card after a fresh install although alsa was working OK during installation.
I had the same happen with a Sidux install and this was fixed by a download and re-install of phonon but something else is wrong here.
Here is the lspci. Not sure what else I should post to help.
My other Arch install (kernel 2.26.28) is ok. The problem seems to be with 2.26.29.
@04:31 AM $ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:05.0 VGA compatible controller: nVidia Corporation C51G [GeForce 6100] (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

Yes I had done that.
This from alsaconf...
No supported PnP or PCI card found
Would you like to probe legacy ISA sound cards/chips?
I have also re-installed alsa-lib, alsa-utils, phonon and everything connected with xine that I could find.
Should I be getting into the kernel? If so I'll need a little help.

MAC: problem to install driver usb 0202

Bonjour,
J'ai t

Ok, i've
MB: 915P Combo , bios last version v1.4
Sound Card on Board: CMedia CMI9880L
Video card PCI expres: MSI Ati RX6000
Memory DDR2 Kistong
Os: Windows XP Pro.
Problem: In Windows, a new device was found, when i try to put a driver come from a CD- come with motherboard ( C-media CMI988L ). The message say ( no device found). I downlaod a last test driver in a site ( MSI )
C-Media Azalia Audio Drivers
Support model    All MSI MB with onboard C-Media CMI9880L audio codec controller.
Description    • New Support C-Media CMI9880L Codec
• Driver version:
WinXP: 5.12.01.0008.50
Win2000: 5.12.01.0007.36
Date    2004-12-7
Your System OS    2000/XP(33745KB
error , no device was found.
++++++++++++++++++++++++++
I check a chip on MB, it is a Cmi988L. what can i do ???
Thank's

Sound problems, ALSA can't find sound card at boot

Sometimes, my sound randomly drops out, and I can't get it back until I reboot. Even when I reboot, 1/20 times, it will not be back.
When I watch stuff on youtube, sometimes the sound just drops out. Nothing gets muted. My audio player can't produce sound.
If I do
lsmod | grep snd
I'll see the some output.
When I reboot and try to play music from Quodlibet, I'll get an error like this:
Output Error
GStreamer output pipeline could not be initialized. The pipeline might be invalid, or the device may be in use. Check the player preferences.
"lsmod | grep snd" will have NO output and when I try to start alsamixer:
[xz@gestalt ~]$ alsamixer
cannot open mixer: No such file or directory
I can't figure out what's going on, and googling has just led me to various not-completely-related posts on this board... what could be the problem?
EDIT: A few more things to note--
I have alsa in my daemons list in rc.conf
I'm part of the "audio" groups.
soundcore is not blacklisted
Last edited by brokengestalt (2012-08-29 09:10:59)

If I try
[xz@gestalt ~]$ lspci -nn
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP67 Memory Controller [10de:0547] (rev a2)
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP67 ISA Bridge [10de:0548] (rev a2)
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP67 SMBus [10de:0542] (rev a2)
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP67 Memory Controller [10de:0541] (rev a2)
00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP67 Co-processor [10de:0543] (rev a2)
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2)
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2)
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2)
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2)
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP67 IDE Controller [10de:0560] (rev a1)
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Bridge [10de:0561] (rev a2)
00:09.0 IDE interface [0101]: NVIDIA Corporation MCP67 AHCI Controller [10de:0550] (rev a2)
00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP67 Ethernet [10de:054c] (rev a2)
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:12.0 VGA compatible controller [0300]: NVIDIA Corporation C67 [GeForce 7150M / nForce 630M] [10de:0531] (rev a2)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
02:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
02:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
02:05.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
02:05.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
Audio devices aren't even mentioned. I noticed when I tried to boot up that I get an error like "sound card not detected." Why would arch suddenly not be able to find a soundcard? It looks like it almost has nothing to do with my ALSA configuration, and has more to do with my sound card not being found at all in the first place....

Driver for sound card????? Please Help!

I have a Mac mini with VMWare fusion with a Windows Vista virtual machine and the virtual machine works fine except Vista doesn't have a driver for my mac mini's sound card. Is ther I driver I can download???? Please Help!

Amazingly enough Vista was able to find a driver that worked automatically and I want to thank you all for your help. I'd like to say that, but no one was any help whatsoever. Oh well it worked.

HOW TO RECOVER DELETED DRIVER FOR SOUND CARD & PCMCI ADAPTER

Hi
How to recover a mistakenly deleted drivers for Sound card, PCMPCI and Other controller on IBM thinkpad ;Type: 1709-AB1? please help
Thanks

Here.
I don't work for Lenovo. I'm a crazy volunteer!

Problem when install driver for DKU-5 cable

After installing driver for DKU-5 cable follow guide line, i conected DKU-5 cable with my computer but there is error appear that is 'can not pass winxp logo testing'.So i can not complete install driver for DKU-5 cable.Please help me.Thanks.

When you get that message, just select "yes" or "continue anyway" and you should be fine.

Audigy 2 ZS Problems after installing driv

I am having an issue that after I install my audio drivers from creative, my cpu idles at 80% usage and my temps go from 33C to 45C without doing anything.....basically it doesnt idle. I already reformatted my pc and the cpu idles at 0.0%? until I? install those drivers than my cpu stays at 80%+.
Anyone know what is causing this?DFI Nforce 3 250GBAMD 64 3400+ 2.6Ghzgb Corsair XMS ramSeagate 320GB SATA II hddMaxtor 60GB ATA/33 hddAudigy 2 ZS sound cardX950pro 52mb AGPEnermax 500W Dual 2V rails (22A x2)?those are my specs, I can install all the drivers? and the cpu stays at 0.0% at idle until the creative drivers are installed.

I haven't had this problem myself, but to get the thread moving, here are two suggestions I've seen offered on the forum. In the Creative Mixer or Windows Volume controls, mute any playback sources you aren't using. Try moving the A2ZS to a different PCI slot (preferably not close to your video card).

Windows 7 bootcamp 3.0 problem with INSTALLING DRIVER

just successfully installed windows 7 through snow leopard following http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/ steps. everything went well. but now when i put my snow leopard disk back in to install the 3.0 drivers the "install bootcamp" option doesnt show up. only the remote install and share cd or dvd drive does. anybody no the fix on this or a link to 3.0 drivers. thanks

I had the exact same problem and i just got this to work. Go to my computer and then right click on the disc image. Then double click on bootcamp and then setup and that should work.

X301 problems after installing driver updates - won't come out of sleep mode

We have a new X301 with Vista 32 installed. Things were working fine until I ran system update the other day. I've set the power options so not shutdown hibernate, however, after a period of time the system seems to go to sleep or to a screen saver and will not come out of whatever state it is in. The only solution is to power off/on the system.
I have an X500 where there were display driver problems if there was an external monitor (dual monitor) attached. The only thing I can think of is that either there is some similar issue with the X301 since we have an external monitor attached or there is something that was messed up with the drivers that were installed. I do have (for now) restore points before these drivers were installed but I'm not ready to take that drastic step yet (or a full system restore and start over).
Anyone experience this type of issue or have any suggestions?
Thanks
Neil

Sadly, I had the issue resurface today. It went into standby/sleep mode while I was in a meeting (on battery power), and later I tried to wake it, and all I got was a black screen with a mouse cursor.
The keyboard brightness and volume keys on the keyboard were responsive (I could hear the audio level clicks as I changed it), but the visual overlay didn't show (where it shows the white speaker graphic with the bar of rectangles representing volume level). Also, the screen brightness keys did nothing.
I finally used Ctrl + Cmd + Power to force a restart. Luckily, my user account didn't get completely hosed like it did a couple weeks ago.
So, it looks like Migration Assistant isn't the culprit here. This is the system I just finished rebuilding. So it's either a bug in OS X/Mavericks, or it's due to an application I have running, or a configuration change I've made.
It seems to only happen when I'm on battery power, for what that's worth. I don't recall it ever happening when I'm plugged in. I have Power Nap disabled while on battery power, btw.
I'm going to enable SSH access so I can try to SSH in the next time this happens. Perhaps that will provide useful diagnostic info.
Anyone have any tips or suggestions?

Problem with installing driver

I have a Webcam Live! PRO. I have downloaded the driver for it and installed it but it isn't working. I plug in the camera when it tells me to, but it's not working. I'm trying to use it on yahoo messenger. I've gotten a new computer. I doubt that is the problem. The camera worked fine on my old computer. HELP ME!! Am I downloading to the wrong place?
kowensby

Glad to hear that. Maybe you can post up what you did to make it work so other people that face similar problem can take this as a reference.
Jason

Sound card problems but with yet another sound card

hello,
I got the MSI K8T Neo FIS2R just a few weeks ago and it really does kick arse but with only one not so big problem.
I have this Hercules Muse DVD 5.1 that works perfectly fine with my previous config (Athlon XP 1800+, ECS K7S5A). But with the K8T with onboard sound disabled, it will play music for a while then freeze then give me a plain black screen. ... That's not cool.
I have, of course, installed the latest hercules (C-Media) and VIA drivers as well as the latest BIOS.
If anyone could help me solve this problem,
Thx,
Antoine

What am I supposed to do?

HP Probook 6540b problem with fan speed and sound card

Hi.
Sorry for my English.
I have installed Arch 32bit on probook 6540b (it has core i5 processor). Cpufrequtils works well - with governor set on ondemand frequency is adjusting correctly but fun is running max speed all the time. I have tried to configure lm_sensors but it doesn`t detect any sensors. Also fun folder in acpi is empty. It would be great if You could help me.
Thanks for any advice.
...ergh
Fan sometimes works slow so maybe its overheating problem.
But
I have another problem with sound on this laptop. I have IDT 92HD75B3X5 sound chip and snd-hda-intel module loaded for it but it doesn`t make any sound. In Amarok it looks like something is playing because progress bar is moving. I have tried everything from arch wiki and other sources but nothing works. Maybe You can help?
Thanks
Last edited by zennon (2010-08-22 08:57:07)

Hi. Yes. I also tried all tricks with model etc. and nothing. Now I have installed oss and have some progress. I have sound on pcm2 when I run osstest, no sound on pcm1 (but it looks in test like it plays something) and input/output errors from pcm3 to pcm7. I have oss output in multimedia in kde and when I run test I can see moving strips or something (I dont know the word for it ) in ossxmix but I hear nothing. I I tried all configurations in ossxmix and nothing.
Last edited by zennon (2010-08-23 12:37:23)

Problem to install driver of sound card

Similar Messages

Maybe you are looking for