Problem to install Matrox millennium g550 on mainboard MSI VIA P4M266A

hi,i'm a newbie.
i dont speak English very well.
I have a big problem to install on my computer with mainboard MSI VIA P4M266A a graphic card model MATROX Millennium g550. The mainboard mounts a integrated graphic card.
if i connect the graphic card on the AGP port and reboot the Pc without change nothing in the BIOS the monitor doesn't work either the integrated vga port neither Matrox vga port, the messagge that i read is "NO SIGNAL"
Which settings i must change to BIOS???
Thank you
Biggio

thanks, but i don't find the bios menu to do it!!!!
in the link below
http://www.speedyshare.com/756670737.html
i enclose some photos of the bios configuration...in which bios menu i have the possibility to disable the onboard VGA????
thanks a lot !!!!
Biggio

Similar Messages

Video Card: MATROX MILLENNIUM G200 8MB SDRAM AGP

Hello,
I have NVIDIA GEFORCE 256 video chip installed in my machine. As there is no driver available for it. I am planning to buy a new video card that is supported by Solaris 8. When I go thru the HCL, I find that MATROX MILLENNIUM G200 (or The other choice that I want to go is Diamond Viper 770.) is supported and thinking of buying that.
1. Could someone share your experience about this video card?.
2. Will this work with out giving any problem?.
3. Or is there any reliable video card that is supported by Sol8?.
The reason I selected these video cards are because they are cheap and tested for all the resolution and color depth.
Please share your experience. Your suggestions are appreciated.
Thanks
Raj

There is a bug in the Solaris 8 FCS driver for the G400 that causes lines of text to be painted very slowly in an X window. I found this sufficiently annoying when composing mail with Netscape Messenger (the mailtool component of Netscape Communicator) that I purchased the XIG X server (http://www.xig.com), which cured that particular problem and provided noticeably better graphic performance, in general.
I've heard that a driver update for the G400 card will ship with the first Sol8/X86 maintenance release that will resolve this problem.

Problems with installing Win 2000 on MS6380

Hello,
I have a problem with installing Win 2000 SP 2 on a PC assembled with a MS 6380 (Kt 266 pro) mainboard.
The setup starts but the system blocks just after the boot, when showing the message "Detecting Hardware configuration" .
The configuration is the following:
Athlon TB 800
MS 6380
128 MB DDR
Matrox G200
20 Gb Quantum Fireball CX HDD
Intel Ethernet card 100 pro + S
I tried to update the Bios to the latest version (1.90) and set the most conservative settings on the RAM timings. I have disabled ACPI, too.
Could someone please help me with solving this problem?
Thanks

You have format the BootCamp partition during the Windows installation, since OSX can only do a preformat using FAT32 (MS-DOS) and Windows 7 needs NTFS as file system.
See page 7 of the BootCamp Installation Guidehttp://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
Stefan

Calling all Matrox Millenium G550 graphics cards...

Calling all Matrox Millenium G550 graphics cards...
Has ANYONE got the Cover Flow view working with this card?
If you have you have what did you do (if anything)?
I've already tried:-
* the latest Matrox drivers
* the latest DirectX
* ensuring that Hardware Acceleration is at Full
* uninstall & re-install iTunes
* install latest Quicktime before re-installing iTunes
P4 2GHz, 1GB RAM Windows XP Pro SP2; Matrox G550; Dual screen

At home, I have a Matrox Parhelia and the cover flow mode works great. I have a G550 in my work computer but I don't have any music local on the hard drive. I use my iPod Photo as axteranal HD to play via iTunes. So, cover art doesn't show up.
However, I have brought to work some hummingbird videos that took last week and added them to the Movie section in Itunes on my Work PC. So, I tried cover flow in the movie mode. It looks awful! Each picture is made up of little pictures in a 18x9 mosaic. I can even see though the gaps where there are grid lines. I don't see this at home with the Parhelia.
I have the latest everything installed as well. I'm running WinXP SP2. Have you found a solution?
Thanks,
Steven

K7T Turbo2: will Matrox Millennium P650 work on it?

I'm thinking of buyin a Matrox Millennium P650 graphics card for my old K7T Turbo2. Any reason not to?
Here's the specs: http://www.matrox.com/graphics/en/cadgis/products/pseries/p650.php
Most notably, it says:
Card type: AGP 8x, compatible with all compliant AGP 4x and 8x systems (1.5 or 0.8 V)
I can get either this card or the p550 for $25, and I want a card that has DVI. Let me know if there would likely be any problem, either with the 4x compatibility issue, voltage, or excessive power draw. Right now I'm running a G450 DualHead, without any real problems other than slowness and DVI-lessness.
thanks for any assistance..

Quote from: Fredrik Åsenius on 04-December-07, 02:54:09
Isn't Matrox very expensive, partly because they say they are for professional image editors?
That is, it isn't for gaming.
Wow, thanks for all the helpful replies, everyone...
Yes, this card isn't for modern gaming, but that's OK with me - my gaming is of a different breed - I'm a professional poker player, and poker software doesn't require bleeding-edge graphics capabilities. But I want the card to drive two DVI monitors (current Dell 2405FPW at 1920x1200 plus future 1600x1200 monitor to sit beside it).
If there's another inexpensive option for a video card that will handle two DVI monitors well, let me know. I'm just looking at the Matrox because I can get a pretty good deal on it.
Thanks again for all the help. I'm glad I found this forum.

Problem after installing new AMD FX-4170 processor

Hello,
i just installed AMD FX-4170 on my MSI 890GXM-G65 mainboard. Then, when i start my computer, everything seems to be fine, all fans are working, those 4 proc. power LEDs are shining, everything is powered. But i get no signal to my monitor, cant get to BIOS, keyboard not working, nothing. I tried two different graphic cards, even that integrated one (not sure if it would work, when disabled in BIOS) nothing changed.
Same problem is when i place back the old Phenom processor. Black screen, from time to time No signal message on my monitor.
I have the lates BIOS 1.d.
Any suggestion?
Or am I screwed and have to buy new maiboard, because this one is somehow damaged?

clear CMOS helped. Computer is not very stable, second SSD disk (F: )(not the one with system) keeps disconnecting after some period of time, but at least i see what is happening it does not even show System reserved area (E: )of the system disk (C: ), that is normally visible...
RAID is set to AHCI, so it is ok.. the trick must be somewhere else.. i will check BIOS one more...

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Problem with installing patch SP1b

Hello All,
I have a development server running on XP pro with live cycle 8.0.1. I 'm facing a problem while installing patch SP1b to that server. I have attached the log file.
My problem is
I copied a process' .lca file from a server running on windows server 2003 with patch installed and deployed on the development server. Now in my development XP box, workspace is opening but when i tried to open the process, before rendering the pdf form it is giving "An error occurred during the operation (endpoint id 401). (ALC-WKS-007-027)" error. I have even crosschecked the input xfaform variable also; every thing is perfect. The details are as below:
The Server from which i copied is: (windows server 2003)
License Type: Full Version: 8.0.1
Patch Version: SP1b
Expired Date: Not Applicable
Installed Components
Product
Version
Patch
License Type
LiveCycle Process Management ES
8.0.1
SP1b
Full
LiveCycle Forms ES
8.0.1
SP1b
Full
The server to which i deployed is: (xp pro)
License Type: Full Version: 8.0.1
Patch Version:
Expired Date: Not Applicable
Installed Components
Product
Version
Patch
License Type
LiveCycle Process Management ES
8.0.1
Full
LiveCycle Business Activity Monitoring ES
8.0.1
Full
LiveCycle Forms ES
8.0.1
Full
Will that patch version could be the problem? What could be the problem and what is the solution?
Thanks
Deepak

Anybody knows the answer?

Problem with installing iTunes

So these are my problems with installing iTunes.
At first it was :
A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
Then it got worse as it would not even open and these would appear:
The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
and this would appear:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I reinstalled maybe about 5 times or more...
If I thought I solved the above problem, this would appear:
iTunesHelper.exe is not installed on my computer.
I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
And others would say to repair the AAS or iTunes etc..
And after trying all these it does not work???
What else works?

I also tried repairing the Microsoft NET.

Problem with Installing the Oracle8i PO into Windows ME

I think I have the same problem as some of you had. Recently, I bought the Oracle Book and it has 3 discs: 1 for Oracle Developer 6 for Win 95 or 98, 1 for Oracle 8i PO (release 8.1.5) for Win 95, also 1 for Win 98.
My computer had no problem when I installed the Or. Developer. However, my computer won't allow me to install the Oracle 8i PO Win 98 disc. Instead of that, I have no problem of installing the Oracle 8i PO Win 95 disc. After I installed the Win 95 disc with all correct configuration according to the instructions, I can not CONNECT to the database. So, is this mean the Windows ME is compatible with the Win 95 disc? Or my computer is "screw up"? Because I know Win Me is very much the same as Win 98. If I installed the Win 98 disc, it should be ok. Anyway, I installed the Win 95 disc successful, but can not CONNECT.
So if anyone can help me out, or need a specific error message, I will post up next time. For now, I think I already gave you guys a "head-ache"... sorry.... Thanks all! Wait for your helps guys!

What drivers are you attempting to install?
- Peter

Problem with Installing Nokia Ovi Store in E51

I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button"

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Problem to install Matrox millennium g550 on mainboard MSI VIA P4M266A

Similar Messages

Maybe you are looking for