Problem to login Ip Phone Agent

I'm trying to login in the Phone with the IP Phone Agent and I got this error message: "You request to CTI Server expired, try again." This happens with any user that I tested. When I try to login with the Agent Desktop on a PC and it works fine.
I'm using Call Manager 7 and IPCC 7.
I'm using exstension Mobility too,

Hi Alisson,
Can you check the real time reports in Appadmin and see if that phone is still showing as being logged in from the IPCC Express standpoint? Sometimes with extension mobility if they logout of EM before logging out of IPPA it may get stuck in a state where it thinks the agent is still logged in but is not. In this case the only way to restore the service is to restart the Node Manager.
Let me know what you find.
Thanks,
Mike

Similar Messages

Failure login "IP Phone Agent" service

Hi! I have an issue. When I try log in the IP Phone Agent service I get an error: "selected service IP Phone Agent isn't active. Select another service IP Phone Agent".
The service URL seems correct: http://ip_address_UCCX_server:6293/ipphone/jsp/sciphonexml/IPAgentInitial.jsp and the Cisco Browser and IP Phone Agent Service is started and has a status "IN_SERVICE".
What is the problem here?
We use UCCX Premium 7.0(1) and CUCM 7.1.5
Thanks in advance!
Ruslan

Hi
Go through the tech tip below and confirm the configuration. If every thing seems to be good then it might be a issue with the CTI manager service on CUCM and you will have to restart that service.
http://www.cisco.com/en/US/partner/products/sw/custcosw/ps1846/products_tech_note09186a008029e6d5.shtml
Following is the order to follow to restart the CTI service
a) In CUCM cluster first stop CTI service on all subscribers
b) restart the service on publisher
c) Then start it on all subscribers.
After the CUCM CTI service is up on CUCM cluster restart the IPPA service in UCCX
hope this helps
Anuj

One button login cannot change agent state because phone is out of service on 8861 phone

I'm testing out the 88XX line of phones for our practice and I am getting the strangest error when trying to enter ready state using one button login.
The phone states...
one button login cannot change agent state because phone is out of service
We are using extension mobility to login into the phone, then hitting the one button login service. (all of which works fine).
Also if I use this same account on any of our older 79XX phones it works perfectly and I can go into ready state and receive calls.
I only have issues on the 88XX line of phones.
Any insight would be great, thanks.
Davidt

Hi Kim,
We have seen this issue in our lab.
But after configuring the authenticate presence and authenticate register and also you need to associate the respective session-server for the ephone-dn as shown below...it will work.
voice register global
mode cme
max-dn 720
max-pool 262
load 7960-7940 P00308000500
authenticate presence
authenticate register
tftp-path flash:
create profile sync 0022049925121368
ephone-dn 5
number 1005
allow watch
session-server 1
exit
Hope it helps.
Anand
Please rate helpful posts

Cisco IP Phone Agent problem

Hi all,
I am trying to setup the IPPA service for IP Phones using UCCX 5. I went through all the steps but when I tried to use the service i got the following error : "Cannot connect to the IP Phone Agent service". I past the service url in my browser and got this :
<CiscoIPPhoneText>
<Title>Error</Title>
<Text>Cannot connect to the IP Phone Agent service.</Text>
<Prompt/>
<SoftKeyItem>
<Name>OK</Name>
<URL>Key:Services</URL>
<Position>1</Position>
</SoftKeyItem>
</CiscoIPPhoneText>
What 's wrong here.
Please advice.
Regards

I have verified the url serveral times.
http://10.12.200.25:6293/ipphone/jsp/sciphonexml/IPAgentInitial.jsp
When the service is used I recieve the message (Cannot connect to the IP Phone Agent service.) Samething if I try the url in a web browser.
What logs can I review to see if something else is pointed out?

After i installed ios 7 in my iPhone 4s and I got problem to login into my icloud account. There is a message appear and said "the operation couldn't be completed (com.apple.appleaccount error 403)" can you help me ? how can i fix this problem ? iPhone 4

After i installed ios 7 in my iPhone 4s and I got problem to login into my icloud account.
There is a message appear and said "the operation couldn't be completed (com.apple.appleaccount error 403)"
can you help me ? how can i fix this problem ?
iPhone 4, iOS 7
iPhone 4S, iOS 7, (com.apple.appleaccount error 403)"

Error: com.apple.appleaccount error 403
Recreate Error: On a Iphone/Ipad device that has "already" created the maximum of 3 per device Apple limit of ICloud account creation attempt to create or login to ICloud service tab in Settings. You will be presented with "com.apple.appleaccount error 403" which does not tell the laymen anything useful.
Cause: IOS 7 reports a "best guess" error instead of detailed error explanation.
How To Resolve Error: Find a device that has not been used to create an ICloud account the maximum 3 times and use it to create the ICloud account by logging into the Settings/ICloud tab with the Apple ID you want a ICloud account created for.
Keep in mind this will use up one of the three lifetime allowed ICloud account creations allowed by Apple on that device.
Also per support: If an existing account is logged into the ICloud service. A. Backup phone using iTunes on a mac/pc. B. At bottome of Settings/ICloud Delete the account "AND" all the user date from the phone. It will offer the Delete all data option. The reason for Deletion(and is why we backed up on a pc vs. the cloud) is when you create the new ICloud account it will backup all of the Device owners information to the wrong persons account.
Once you have created the new ICloud account log into that account on device that was presenting error: "com.apple.appleaccount error 403" it should allow the ICloud login.
Once you have verified the "device with error" is ICloud functional delete the ICloud account from the device used to seed the ICloud account and delete again all user data from cloud. Restore the recently created mac/pc Itunes locally created backup to the phone and then go to Settings/ICloud and login with the device owners Apple ID and password and verify your backup to the ICloud settings and Eureka! your done.
It took less time to do that for me to type this lol.

Cannot Modify Arcserve Job - 'Failure to login to the Agent'

Could not modify ARCserve Job, Received Failed to login to the Agent, even though the user and password were correct.
ARCserve running on a NW5 server, NWAgents running on NW6.5 servers.
ARCserve Manager running on an XP workstation
Each time I attempted to modify an ARCserve Job on my XP workstation, I was able to see files on the NW5 server (where ARCserve resides), but could not open any volumes on any remote servers where NWAgents were running. ARCserve Manager shows IP address of 0.0.0.0 for the remote servers.
Here is the solution to the problem.
I lost my initial writeup and this is done from memory.
To get this to work, I did the following:
1) Make sure the HOSTS file on the ARCserve server contains the IP addresses of all of the servers as well as the IP addresses of the workstation where ARCserve Manager runs.
2) Make sure the HOSTS file on the workstation contains the addresses of the servers.
3) Run Regedit. All entries are in the following HKEY_LOCAL_MACHINE\Software\Computer Associates\BrightStorARCserve\Backup\Base.
4) Under ASmgr\AgentNodeAddress\IPAddress - modify/add the following values:
a) \\< RemoteServer1> <IP Address of Remote Server 1>
b) \\< RemoteServer2> <IP Address of Remote Server 2>
c) <ARCserve Server> <IP Address of ARCserve Server>
I had to add the IPAddress key and I also remove the SPXAddress key.
5) Under ASmgr\ClientAgent Node Address\NETWARE Agent - modify/add the following values:
a) <IP address of remote server 1> <RemoteServer1>*0
b) <IP address of remote server2> <RemoteServer2>*0
Substitute <fields> with your values for your servers. The capitalization of the registry entries may not be correct, as well as whether there are blanks or not in the key fields. But you will get the idea.
When I completed this, I was able to see good IP addresses for my NWAgent servers instead of the 0.0.0.0. And I was able to expand the volumes and see all of the files. And I was able to modify the jobs to add additional files.

What version of ARCserve are you using?
What version is the Agents on the Servers?
What version of the Agent is on the Workstation?
Check the Agent log for any error messages.
Reboot the workstation and try logging in with an account with 'admin' privileges.
Also have you tried the latest Service Packs for your version of ARCserve?
Leroy Joseph
Visual Click Software
(eDirectory Management and Reporting)
eDirectory Management | DSRAZOR for eDirectory

Problems with the Cisco NAC agent, does not perform remediation??

Good Morning
I'm doing an implementation of NAC, but when the user is authenticated, the agent informs you that does not comply with defined security policies, to start the repair and re-scan the machine error appears "NAC Server is not available on the net" . The policy I am doing is to check a file on local disk C
Deputy error screen
I appreciate your responses as soon as possible

the problem i have is when it moves into remediation....phase 2. If no remediation is being done (ie no checks, rules scans etc) then it moves directly from phase 1 (authentication) to phase 3 (authenticated user and assign role) and all works fine.
I've looked under all the traffic rules and can see nothing that would mean it could not contact the CAS. There are some differences in 4.7, like the ethernet traffic filter. It seems to me when put in the temp role, the vlan should still be the auth vlan. There is a role based vlan option under edit roles, but it states that is only for normal login, not tem agent, so it should not apply.
Im starting to think something has gone wrong with the upgrade code somewhere....TAC looked at my config and could see nothing on a quick check, im working with them to resolve the issue

Choosing between external and partner application and problem with login

We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
There are at least two problems I have encountered defining the application as external:
1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
Thank you

Just some information :
- The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
- There is also another thing I don't understand. The link to external application is something like:
javascript:open_jwindow('../ealogin?ID=76D4766','76');
and couldn't be executed outside pls/orasso
in other words we can't give that to our users, can we? They should login to orassso and see that?
We don't want to involve them in Identity Management...
Any help is appreciated....
Regards

Problem in my I phone 5

Hello how are you ?
That's. first time to communicate with you
I have problem in my I phone 5
I just bought the phone from 2 months ago from Vodafone shop in Egypt
After thats the phone was restart suddenly , I sent it to technical centre of Vodafone and they installed the SW again after two days the phone make the problem I tried many time to restart the phone by holding the below button and above one but no response some time response and working for while the switch off again really I hat the support of apple in Vodafone Egypt
So please I need help ASAP
Thanks
Islam
<Email Edited by Host>

Hi manish4499,
You do not give much detail as to what your issue is or what steps you have taken so far to resolve it, but I would suggest you start with the content of this article -
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Best,
Brett L

I have problem with login in sql Server give me support .pre login handshake

I have problem with login in sql Server give me support .pre login handshake

The following threads are on the same topic:
http://www.sql-server-performance.com/forum/threads/pre-login-handshake-error-when-connecting-to-db.687/
http://stackoverflow.com/questions/12308340/sql-server-2000-connection-error-pre-login-handshake
http://dbaspot.com/sqlserver-server/458011-error-occurred-during-pre-login-handshake-microsoft-sql-server-error-10054-a.html
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

I am experiencing problems with my i phone due to sharing my daughters i tunes acoount. I have been told by apple to cancel my existing (shared) i tunes account and open a new one for my use only. How do I do this? Please help. RM

I am experiencing on going problems with my i phone 4 due to me sharing an i tunes account with my daughter. I have been told by apple to cancel my existing (shared) i tunes account and open a new one for my use only. How do I do this? I cant find any links in i tunes to do this. mountfield

No, it's done on the computer, it's just done on the web and not through iTunes. I guess you could do it on the iPhone, but it would be easier to do on the computer.
Just go to the site linked above, then click on the big blue button and fill out the neccessary information.

I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of yo

I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write

dedegodoy wrote:
I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write
What does that mean? What is your technical support question?

I bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working

i bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working.
I saw cidya aap so i m not sure if it was jailbroken or not before but it is back to normal settings.
My problem started when I tried to sync my music files. I pressed 'sync' all it says is waiting for sync start, preparing to sync and then waiting for the changes to be applied. but it does not sync at all.
I found a way to sync my music files through autofill but I really wanted to sync ringtones but its not syncing and I really wanted to put ringtones in my phone please help.

If you see the cidya app, your iPhone is hacked with the cutsie term for this being jailbroken. This also means all the built in security has been removed making the iPhone as insecure as an android device.
Restore the iPhone with iTunes as a new iPhone or not from the backup to get rid of that hacking garbage. If the iPhone has hacked to be unlocked, the iPhone will no longer be unlocked when doing so.

Problem in login with sys

hi,
i have a problem in login with sys, the situation as follows:
1- when i try to connect using : sqlplus "/as sysdba" or "sys/password as sysdba" it connect me to the DB.
2- when i try to connect : sqlplus "sys/password@MYDB as sysdba" it gives me "ORA-01017: invalid username/password; logon denied".
3- when i try to connect with another user i.e : sqlplus "system/password@MYDB" it connect me to the DB.
DB version : 9.2.0.8
OS version : Solaris 10
please advice...

1- when i try to connect using : sqlplus "/as sysdba"
or "sys/password as sysdba" it connect me to
the DB.This works anyway, because you're authenticated by OS. Example :
SQL> conn sys/aaaa as sysdba
Connected.
SQL> conn sys/bbbb as sysdba
Connected.
SQL>
2- when i try to connect : sqlplus "sys/password@MYDB
as sysdba" it gives me "ORA-01017: invalid
username/password; logon denied".Here you need the real password, so make sure you're using the correct one.

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was hot at charging time.

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was working hot at chargering time. Apple need to address this asap!!!!

Hi Suzy Q,
I can send and receive calls.
I get "messaging stopped" when doing a lot of texts.
Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
It runs slow.
I have 5 apps on here. I should be able to have a lot of apps on here, and play music, and have files, and...and....and.
I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
I get VZWAVS has stopped. (not sure if those are the right letters)
The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
I get a black screen on occasion.
sometimes the proximity sensor doesn't work.
sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
I soft reboot often--turn it off wait a bit and

Problem to login Ip Phone Agent

Similar Messages

Maybe you are looking for