Problem to maintain the Comments in BW 7.3 Integrated Planning

Dear All,
Can anybody please guide me to complete the " Flexible Comment Solution for BEx Applications." As I am working on BW7.3 SP8
and was gone through the documents " How to Flexibly Change Characteristic Values and Comments in BI Integrated Planning" and "How To Build a Fast and Flexible Comment Solution for BEx Web Applications".
But unfortunately, I did'nt got any result from these two documents.
How To Build a Fast and Flexible Comment Solution for BEx Web Applications
How to Flexibly Change Characteristic Values and Comments in BI Integrated Planning
Thanks in Advance,
Krishna Chaitanya.

Hi Suman,
The exact issue is after entering comments and it is stored in Buffer and unable to retrieve / displayed
in the layout. This is what I am facing problem and tried with all the steps mentioned from the document How to Flexibly Change Characteristic Values and Comments in BI Integrated Planning.
Apart from the above, I tried with another document How To Build a Fast and Flexible Comment Solution for BEx Web Applications and here after entering the comment and want to save the comment in a particular row using REPOST function, stating the error that Characteristic comments has no master data for "test". test is my comment.
Hope you understood.
Regards,
Krishna Chaitanya.

Similar Messages

Problem in maintaining the settlement rule in the maintenance order

Dear Friends,
I have a problem ,When I am trying to maintain the settlement rule in the maintenance order ,I am getting information like below
Decentralized system -> note settlement rule is not distributed
Message no. /ISDFPS/PM124
Diagnosis
You navigated to the settlement rule.
System Response
The system informs you that a settlement rule can be created but that it will not be distributed to the target system. Settlement is carried out in the target system, where the order is usually settled to the WBS element of the operation.
Can anyone throw some light on how this is happeing and remedy?
Appreciating your early response

Hello
Please check
TC --> KSR2_ORC
Please maintain the Strategy Sequences for Automatic Generation of Settlement Rule.
You define a strategy sequence for automatic generation of settlement rules for internal orders.
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Sep 3, 2010 12:37 PM

Problems with HowTo "Creation of BI Master Data in Integrated Planning...)

Hi,
one of our customers need a planning application in which he can create master data for different attributes, insert some key figures for this attributes and changes already planned key figured.
For the last two point I've already found a working solution, the first point (creating of masterdata in web template) is still a problem. After a little search, I found a howto-guide "Creation of BI Master Data in Integrated Planning (IP) through Web Layouts", in which the necessary steps are described, how to do this (please see following link: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6)
Does anyone of you know this guide and was able to build a working solution?
I have different questions, maybe you could help me:
- what kind of variable is he using?
- do I need a DataProvider in Web Template?
- how do I get the connection to the used variable in the button group?
Thanks for your help.
Regards
Tim

Hi Timo,
you require two howtos to implement the solution.
First, please take a look at the first document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92?QuickLink=index&…
In chapter 3 you see the prerequisites (note 1101726 and notes 1384495, 1387004 and 136772). By this, you change the system behaviour, not to check if the new inserted master data is valid (it can't be valid, because the entries are new!)
And after this please implement the solution from the how to.
Furthermore you can take a look at this how to, which might help you too:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6?QuickLink=index&…
Even if my first post is a bit old, my customer still uses this solution, at the moment we are on 7.3 sp06, so it is working in newer releases too.
Hope this helps.
Regards
Tim

What is the use of fox formula in integrated planning

what is the use of fox formula in integrated planning

Hi,
just as a follow up - the FOX Extension Formula capability of the IP in BW is as others have mentioned - to help develop formulas to execute calculations during planning, forecasting, budgeting, etc. - it allows consultants, like myself, to develop these formulas without the help of an ABAP consultant - but creates ABAP programs behind the scenes.
You can also use these ABAP programs separate from the IP component - once you create a FOX formula you can retrieve the ABAP program and then use it for other activities.
With the FOX you can use variables in a formula, call another ABAP program, generate loops of data both master and transactional, allows IF, THEN statements, and a number of other activiities. There is a limit to the usefulness of the FOX formula process - you may find if the FOX formula is too complex or long that your process will run slowly during the calculations. If this is occurring you will need to debug your ABAP program to see if you can increaase the performance.
Thanks and hope this helps, Pete

Problem while maintaining the Session

Hi friends,
I'm building chatServer in j2me using Servlet/Jsp.So while doing so i want to maintain a session.
For that i've invoke the following method,
HttpSession session = request.getSession(true);(in server)
But from that same MIDlet when i again send some text it again create new session id.
How could i resolve this issue as i just want to use same MIDlet when sending data to server?
Do i use diffrent Servlet/Jsp( at server side) when i going to send data after my session maintain?
But how could this new Servlet/Jsp( at server side) page get the same session id ?
Is there any other to resolve this ( want use only Session Tracking API)?
Regards,
Sachin Warang.

You need to do your session stuff in your midlet to make it work with sessions. Check how servlets do the session stuff, and let your midlet work with it.

Problems with the 'Comments' field in iTunes

First, sorry for my english (I'm danish).
I've read a lot of threads here and everywhere else, but can't find a solution for my exact problem. I use Windows Vista and the newest version of iTunes.
Most of my mp3 songs (35.000) are put directly in album folders to the folder 'D:My Music from another computer via a USB drive and the songs already have id3 tag information on them.
I then add the albums to iTunes and most of my tag information is now updated in iTunes. Names, Artists, Genre, Year, everything is okay. By the way the songs have ID3v2.3 tag information. I see that in my Mp3tag v.2.42 application.
But the problem is with the 'Comments' field:
Those tags (originally put to the songs directly in the proberties of the song in Windows Explorer) will simply not transfer to iTunes 'Comments' field. And if I write something in the iTunes 'Comments' field this will not show up in the fields properties in windows Explorer. It looks like the 'Comments' fields in iTunes and in the proberties in the song are not connected at all!?
I then found out, I could let iTunes convert the ID3 codes, but nothing happens except from when using v. 1.0 or 1.1, because then the comments tag are transferres, but unfortunately all the tags will only show 30 characters!!!
And there's also a different story:
A few albums though are put directly on my computer by using iTunes to import the CD. These songs have ID3 v.2.2 tags, so I guess iTunes import files in that format?
And here it's a little different story. If I put comment data directly to the file proberties in Windows Explorer (after the CD's been imported to iTunes), the comments will show up in iTunes, but only as several 0 and 1 digits! On the other hand, if I put information directly in iTunes 'Comments' field it wil show up correctly in the file proberties! But it's only a few songs/albums that are handled that way.
Well, bottom's line, I want to see my comments tags (which are allready there in the song's proberties) when I browse my music in my folders in Windows Explorer and I want to see the exact same comments if I go to browse my music in iTunes. That should not be a problem ... but it is not ...
Can I please get a solution or at least an explanation, and hopefully in not too tecnical terms.

I, too, hope someone will answer this! I am hoping to catalog my entire CD collection in iTunes and I want to include the storage box number somehow, thinking that "comments" would be a good place to do so. If I cannot do that I'll try to find a program other than iTumes to do it. Does anyone have any suggestions on this topic? ...perhaps I need to open a new thread?
THANKS!
Doug

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
 Cheers, Tom

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on th

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.

You haven't a problem. You simply did not read the iWeb Help :

When i try to activate iMessage i could see the comment "waiting for activation" for more than 24hrs.Is this because of mobile device problem or someother issue ? My mobile is just 20 days old

When i try to activate iMessage i could see the comment "waiting for activation" for more than 24hrs.
Is this because of mobile device problem or someother issue ?
My mobile is just 20 days old

The following discusses that error message and may help: iOS: Troubleshooting FaceTime and iMessage activation

Reg:where will the comments in tcode pa30 maintained

Hi All,
I have a requirement where I need to get the comments maintained for the info type 0019 in the tcode pa30.
I have placed the cursor on the field and pressed F1 help to see the table in which these comments are stored.But these comments are maintained in the structure RP50M and the field name associated is TEXT1.
Could you please let me know in which table will these comments be stored.
Regards,
Kishore

Hi Krishna,
I agree with the Mark Ande's answer.
Here is the code to get the text.
tables: pcl1, pcl2.
include rpppxd00.
include rpppxd10.
include rpppxm00.
DATA: BEGIN OF ptext OCCURS 200.
DATA: line(78).
DATA: END OF ptext.
DATA: tx-key LIKE pskey.
DATA: BEGIN OF text-version,
        nummer TYPE x VALUE '02',
      END OF text-version.
start-of-selection.
CLEAR: text-version,
             ptext,
             tx-key.
      REFRESH ptext.
      tx-key-pernr = p0019-pernr.
      tx-key-infty = '0019'.
      tx-key-subty = p0019-subty.
      tx-key-objps = p0019-objps.
      tx-key-sprps = p0019-sprps.
      tx-key-endda = p0019-endda.
      tx-key-begda = p0019-begda.
      tx-key-seqnr = p0019-seqnr.
      IMPORT text-version
             ptext
             FROM DATABASE pcl1(tx)
             ID tx-key.
     loop at ptext.
      write:/ ptext-line.
     endloop.

Maintain the Stock in SAP problem

Hi,
In my Business Process (Textile Industry) First they will receive the Material from the Customer (GRAY Material) after 2 or 3 months customer will give the Program for the Material
In this how we can maintain the Stock in SAP and also while Raising the Sales order how we are going to track that particular customer material GRAY

Hello prasanna
In my Business Process (Textile Industry) First they will receive the
Material from the Customer (GRAY Material) after 2 or 3 months customer
will give the Program for the Material
In this how we can maintain the Stock in SAP and also while Raising the
Sales order how we are going to track that particular customer material GRAY
The business process as cited by you is not clear, could you please rephrase and explain clearly the business scenario so that it will be easy to provide suggestion ?
Best Regards,
Sarthak

Why apple authorized dealer does not maintain the conditions that apple provides for guarantees?

why apple authorized dealer does not maintain the conditions that apple provides for guarantees?

Since we have no idea what specifically you are talking about, we cannot provide useful comments nor advice. If you have a problem with your iPhone, you need to take it to Apple or an authorized iPhone service center. Most resellers are not authorized to service the iPhone. If you'll tell us what country you're in, we can guide you to appropriate service resources. Note that the warranty on an iPhone is valid only in the country in which the iPhone was originally sold. If you are in a different country, your warranty will not be honored there.
If that's not what you are referring to, please explain.
Regards.

How can I restrict maintaining the same customer for different CC Areas?

Hi All,
I have a problem about maintaining customer credit limits via tcode FD32.
User can maintain a customer in different credit control areas (CCA) and these CCAs are belong to different company codes.
How can i restrict the user not to update another countries' credit limit?
Your fast reply will be highly appreciated.
Regards,
Bilal

Hi,
I donu2019t think so there is any configuration for this kind of purpose.
You can only do by the authorisation.
Just give the user authorisation that only this person can change the value of the credit control area.
And I think so that will be usefull also because if every body has authority then any body can change the limit which is not good.
First they have to take permission from the authorised person and if he approved then only he should change limits.
So just try out the user authorisation for your purpose.
Regards
Raj.

Maintain the current row position of a table after refresh.

Hi,
I use a poll to refresh tables continuously. when a table is refreshed, the current referring row is reset.
To maintain the current row position after a refresh I use the following poll method.
public void refreshTableT1(PollEvent pollEvent) {
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding dcb = fctx.getApplication().createValueBinding("#{bindings}");
DCBindingContainer bindings1 = (DCBindingContainer) dcb.getValue(fctx);
DCIteratorBinding dciter = bindings1.findIteratorBinding("<VOIterator>");
if(dciter!=null){
if(dciter.getCurrentRow()!=null){
Key current_row_key = dciter.getCurrentRow().getKey();
dciter.executeQuery();
if(current_row_key!=null){
try{
dciter.setCurrentRowWithKey(current_row_key.toStringFormat(true));
}catch(Exception ex) {
System.out.println("Exception in current_row_key");
}This works for normal tables well. But when I use it to master-detail tables (pair of tables) it does not.
At the master-detail tables, before the first data fetch, it works well. if we go below the first data fetch, it sets the current row into another position.
how can I overcome this...??
Thanks,
Dinuka.

Hi Mr.Frank,
I have an association in two VOs.
for example: There are 2 tables called Emp and Dept. Every Department has Employees. so there is an association (both tables have a common column). Master table is the Dept table. when you click on one record of the Dept table Detail table will show the details of the employees belongs to that selected department. That's what I referred as master-detail tables. first one is master table; second one is detail table.
When the web page loads all the table data is not fetched from the db (it will depend on the fetch size). when we scroll down the table data fetch happens again and again.
think my data fetch size is 25 rows per time.
Suppose we use mine poll method and think I have clicked on the 20 ^th^ row of table1(master table). then the table2 will display details belongs to selected department. that is OK even after refresh. that works well.
when I go to 30 ^th^ row data fetch will happen (my fetch size = 25)
when I click on the 30 ^th^ row of the table1(master table), table2 will display details belongs to selected department. but after the poll method is called the selected row at the table1 disappears and is set to another position. now the 30 ^th^ row is not in the 30 ^th^ position. but it is the selected row and table2 displays correct details.
I think you have got the problem now. :D
Thanks a lot.
Dinuka.

I have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS?

i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.

First let me apologize for posting a reply that was only suitable for advanced users. Photoshop is broad and powerful therefore has a huge learning curve. In fact I would state no one knows and uses all of Photoshop. When we first get Photoshop it intimidate us and we're very uncomfortable using it. Many thing are not intuitive there in much learning involved. After some time we begin to know something and we are able to do some thing. Learning become rapid and we start playing in Photoshop. It is very important to play with Photoshop. Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn.
Photoshop Power lies in layers, selection and automation. However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears. Most at one time or another want to watermark or put a logo on their image. So its best to automate this process. All run into a problem in the process. "Size" We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation. Vector graphics works best when size vary greatly. If you can not work out how to create a vector solution like a custom shape. Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
I do not type or do English well so let me do some screen captures. I can not stress enough how important Black, White, Grays and Blending is when it come to image processing. Become friends with Multiply, Screen, Overlay and Luminosity blending.....
However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible. When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background. Many tools can be used to create the selection hee I use my action kill white.
Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop. Recently Adobe gave me and other a year subscription to the creative suite for our participation here. I still have not installed anything but Photoshop, A while back I found a program that can create vector patf for black and white art work. It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd

Problem to maintain the Comments in BW 7.3 Integrated Planning

Similar Messages

Maybe you are looking for