Problem to make recvery

my os is osx mountain lion 10.8 and i try to reinstall from my recovery pc every time i enter my apple id it's say (this apple id has not purchased lion you must sing in with an apple id that was used to purchase "OS X Mountain Lion") let me know how to install the os or how to chang the apple id on the product

recovery pc
What's that?   Please clarify.
how to chang the apple id on the product
Are you the original owner of the MBP?   Your answer depends on how you should preceed.

Similar Messages

  • I have big problem i make update to my software  iso 7.12 in my iphone 4  but when i recive calling  and i want to cancel and recall again i phone is stop no working and i must restart it to work what can i do

    modem firmware 04.12.09
    iPhone 4
    memory is 32 g
    iso 7.1.2(11d257)
    when cancel call it not work before is shutdown and open it again
    i have big problem i make update to my software  iso 7.12 in my iphone 4  but when i recive calling  and i want to cancel and recall again i phone is stop no working and i must restart it to work what can i do

    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • I know why coming ios 7 for ipod 4g. this is not my problem its your problem , please make for ipod 4g

    i know why coming ios 7 for ipod 4g.
    this is not my problem its your problem
    , please make for ipod 4g

    mohammad mhp wrote:
    iknow about this
    i like apple make ios 7 for 128 or 256 RAM
    plz i want it
    Apple would have to strip so many features out of iOS 7 to make it work on your iPod that about all you'd have would be iOS 6 with different icons. So as the others have said, this is not going to happen. If you want iOS 7, you'll need a newer iPod.
    Regards.

  • How do i fix this: error message- index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the ser

    that is...
    index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
    File activity incomplete. 1 file(s) or folder(s) were not completed.
    Files with errors: 1
    index.html
    thanks!

    It's under More Options triangle in the Manage Sites panel.  See screenshot:
    Nancy O.

  • Problem with make in cpan and OS 10.5.6

    Hi, my Perl installation of DBD::mysql was just broken by installing 10.5.5 and then 10.5.6 over 10.4.11. No problem, I thought, just install the new one from cpan and I'm on my way. Not so fast, is what cpan says. Or, to be more specific, this is what cpan says:
    "Writing Makefile for DBD::mysql
    make: * No rule to make target `/System/Library/Perl/5.8.8/darwin-thread-multi-2level/CORE/config.h', needed by `Makefile'. Stop.
    /usr/bin/make -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible"
    Same if I try to reinstall DBI. Any ideas? Is make broken (well, forget that question...;-)?

    ok, I just installed XCode Tools from the 10.5.5 installer DVD, that took care of the make problem. DBI and DBD::mysql installed without a hitch and all my programs are up & running. Apache2 rocks, it's all like lightyears faster than the WebServer on my PowerBook 12". I'm starting to like this... Well, maybe it also had to do with the PB being slower and all, but I doubt it.
    Do I get a cookie/star now, for having answered my own question? :-D

  • Accounting problem in Make to order cofiguration

    Dear friends
    we have implemented make-to-order scenario on one of our product. We have successfully gone through the following steps....
    sales order -> converting to planed order [md50] -> converting planed order to process order -> confirmation of process order -> transfer cost from process order to sales order[KO88] > delivery> PGI. But *we did not found any accounting document generated after PGI, and all the pricing conditions are yellow except EK01 and DIFF in sales order and billing document.* Is there any thing missing in the above steps or any other problem ?
    regrads
    Kaushik

    Dear Friend
    Inventory accnt problem is solved as per ur guide line. But I am getting problem with the Pricing procedure. I have used KOFk as accnt cond type, and EK02 as cost cond type. At the time of creation of sales order all cond type is green and EK02 is 0 with red color. But after saving the order when i open the order find all cond type is yellow and EK02 is green with calculated value and NET VaLUE of the order is equal to EK02 value. Kindly gide me where is the problem
    Regards
    Kaushik

  • Tricky problem: TM makes only one backup and then can't find disk anymore

    I had a problem with TM backups and erased the whole TC, because that solved a problem I had in the past.
    My iMac is connected via Ethernet. My notebooks via WLAN. BUT THIS PROBLEM OCCURS ON MY IMAC ONLY.
    Then:
    1) I defined new accounts.
    2) Next backups worked like perfect.
    3) The next back up not any more: Error message: "TM could not complete backup. The backup disk is not available"
    4) After resting the TC or rebooting the iMac I can make a backup, but the next fails again. The disk isn't visible in the TM preferences.
    5) Logs of the successful backup are:
    Starting standard backup
    Attempting to mount network destination using URL: afp://[email protected]/iMachaller
    Mounted network destination using URL: afp://[email protected]/iMachaller
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/iMachaller/iMac Haller.sparsebundle mounted at: /Volumes/Time Machine Backups 1
    Backing up to: /Volumes/Time Machine Backups 1/Backups.backupdb
    No pre-backup thinning needed: 55.21 GB requested (including padding), 423.69 GB available
    Copied 23.6 GB of 45.6 GB, 34126 of 895334 items
    Copied 44.7 GB of 45.6 GB, 37338 of 895334 items
    Copied 37339 files (44.7 GB) from volume Macintosh HD.
    No pre-backup thinning needed: 1.00 GB requested (including padding), 364.82 GB available
    Copied 2692 files (212.3 MB) from volume Macintosh HD.
    Starting post-backup thinning
    No post-back up thinning needed: no expired backups exist
    Backup completed successfully.
    Ejected Time Machine disk image.
    Ejected Time Machine network volume.
    6) logs of the non successful logs:
    Starting standard backup
    Attempting to mount network destination using URL: afp://[email protected]/iMachaller
    NetAuthConnectToServerSync failed with error: 62 for url: afp://[email protected]/iMachaller
    Backup failed with error: 19
    Could somebody help please.
    Thank you

    Vista?
    Ooh boy.
    http://support.apple.com/kb/TS1538
    Good luck.

  • Lion is very slow. I have problem to make copy of a file. How can I make a check  to see what is wrong?

    Lion is very slow. The big problem now is when I need to make a copy of a file in an external HD. A file about 7 Gigas can take 4 hours!!!
    Using Aperture I try to save a library in an external HD (another) with function "export project as a library" an takes hours for something around 1 giga.
    Since I have Lion I can not use Time Machine. I have a Western Digital 2 Teras in raid 1. 1 tera for copy and 1 tera as an image. It's been impossible. I had to format the HD and when I try to start using Time machine my 600 gigas of data becomes in 7 days!!. 7 days !! for a backup. An usually after several hours (sometimes 20hrs,  sometimes 1 day and a half) the process stoped abrudtly... and that's it. star again.
    How can I check or perform a exploration to see what is happening?
    thanks in advance
    RyJ     

    Is a Western Digital Studio Edition II 2T (in RAID 1 mirror). The HD has 2 drives 1T each an put one mirroring the second one.
    HD is connected to Mac through Firewire 800.

  • Problem with Make file

    I am working on recently upgraded Solaris 9 and I am using a make file to build an application using make �f brc.bld
    It is giving the error : make: Fatal error in reader: brc.bld, line 9: Unexpected end of line seen
    for the line in this build file : %Echo Begining execution of $(_script)
    I am using cc for the make file ( cc: Forte Developer 7 C 5.4 ) and the make command
    Any help in this regard is appreciated.
    Regards,
    Vivek

    Hi,
    I am not able to find error message related to brc.bld. If a test case could be provided, that will be helpful.
    Or please try our most recent version Sun Studio 10(Trial Downloads http://www.sun.com/download/products.xml?id=41e70b09) to see whether that fixes the problem.
    Thanks.
    Rose

  • Adobe 8.1.2 Problems to make printing

    I will try to explain myself in english but may natural language is French
    I try to make some printing from the electricity company, but when select the printer, adobe says impossible to print, contact the sales, or versionn 8.1.2 french is free for the basic function.
    I try to go in the configuration panel, and see that the software is about 100 Mo but when i decide to modified or get it out, I get a message saying
    that it is impossible.
    I try to make a general search, but nothing
    If somebody have an Idea, it will be welcome

    I have a similar problem. In my application we generate a pdf. My client is french and has a french Adobe Reader version. When he opens the pdf in the browser then click the print button, he gets "impossible to print the document" error. But if he saves it on his computer and then print it, it works.
    This happens randomly, some times its printed and sometimes it gives error. Please suggest what can be the problem, does it has something to do withthe Adobe Reader version?

  • Problems with make/gcc on Solaris

    I'm working on building a binary on several different platforms, but the only one giving me trouble is Solaris 10 (64-bit -- though apparently this is building a 32-bit binary). The binary relies on the following project:
    https://projects.coin-or.org/Cbc
    I can checkout their code from SVN and build it without a problem. However, we then have a small cpp file that links to those libraries. I cannot get this cpp file to build. In fact, Solaris chokes on the makefile itself complaining that one of the lines ends with the '$' (which it does). The strange thing is, this makefile works correctly on Linux. It also works just fine on Windows in the MinGW environment (I do have to add a few flags on Windows but they are completely unrelated and the line ending with '$' still still present and works).
    Since the makefile failed, I tried to run the 2 commands that it does manually. The first one succeeds but the second command fails to locate the dynamic libraries -- even though the directory they reside in is specified in the -L argument. What gives??
    I put /usr/ccs/bin and /usr/sfw/bin in my PATH variable so that I can use make and gcc. I had to add /usr/sfw/lib to the LIBDIR variable, otherwise I was getting even more errors. Here is the makefile and the error that I get when I try to run make:
    -bash-3.2$ cat makefile
    CPP = gcc
    COINPATH = /export/home/locuser/cbc_source/coin-cbc
    CPATH += -I$(COINPATH)/include/coin
    LIBDIR = -L$(COINPATH)/lib:/usr/sfw/lib
    COINLIBS = -lCbcSolver -lCbc -lCgl -lOsiClp -lClp -lOsi -lCoinUtils -lm
    CFLAGS += -DUSE_SNAPSHOT=1 -DNEW_SIMULATOR=1 -g $(CPATH)
    DATASTORE=$(PSASRC)/datastore.a
    .c.o:
    $(CC) $(CFLAGS) -c -o $@ $<
    .cpp.o:
    $(CPP) $(CFLAGS) -c -o $@ $<
    OBJSx = cbc.o
    cbc: $(OBJSx) $
    $(CPP) $(CFLAGS) -o cbc $+ $(LIBDIR) $(COINLIBS)
    -bash-3.2$ make
    mksh: Fatal error in reader: '$' at end of line
    Current working directory /export/home/locuser/cbc_source/solver
    Then this is what happened when I tried to run the 2 commands manually:
    -bash-3.2$ gcc -DUSE_SNAPSHOT=1 -DNEW_SIMULATOR=1 -g -I/export/home/locuser/cbc_source/coin-cbc/include/coin -c -o cbc.o cbc.cpp
    -bash-3.2$ gcc -DUSE_SNAPSHOT=1 -DNEW_SIMULATOR=1 -g -I/export/home/locuser/cbc_source/coin-cbc/include/coin -o cbc cbc.o -L/export/home/locuser/cbc_source/coin-cbc/lib:/usr/sfw/lib -lCbcSolver -lCbc -lCgl -lOsiClp -lClp -lOsi -lCoinUtils -lm
    ld: fatal: library -lCbcSolver: not found
    ld: fatal: library -lCbc: not found
    ld: fatal: library -lCgl: not found
    ld: fatal: library -lOsiClp: not found
    ld: fatal: library -lClp: not found
    ld: fatal: library -lOsi: not found
    ld: fatal: library -lCoinUtils: not found
    ld: fatal: file processing errors. No output written to cbc
    collect2: ld returned 1 exit status
    However, if I cd into the directory /export/home/locuser/cbc_source/coin-cbc/lib then the libraries do indeed exist there:
    -bash-3.2$ cd /export/home/locuser/cbc_source/coin-cbc/lib
    -bash-3.2$ ls lib*.so.0
    libCbc.so.0 libClp.so.0 libOsiCbc.so.0
    libCbcSolver.so.0 libCoinUtils.so.0 libOsiClp.so.0
    libCgl.so.0 libOsi.so.0 libOsiCommonTests.so.0
    Any ideas on what I am doing wrong here? It seems like there is something non-standard about make on Solaris?

    Woo hoo! I was able to finally get past this. Thank you both for you assistance. I tried the LD_DEBUG=files option and it didn't seem to help me much. I got some additional output but it appeared unrelated. So then I separated out my -L argument into 2 separate arguments. This changed the error messages and led to some errors about operator new and delete not being found as well as some gz and BZ2 functions not being found:
    Undefined first referenced
    symbol in file
    operator new[](unsigned int) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
    operator new(unsigned int) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
    std::basic_string<char, std::char_traits<char>, std::allocator<char> >::operator[](unsigned int) constcbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
    std::basic_ostream<char, std::char_traits<char> >::operator<<(std::basic_ostream<char, std::char_traits<char> >& (*)(std::basic_ostream<char, std::char_traits<char> >&))cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
    vtable for __cxxabiv1::__si_class_type_infocbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
    std::basic_ostream<char, std::char_traits<char> >::operator<<(int)cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
    BZ2_bzRead /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
    operator delete[](void*) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
    operator delete(void*) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
    gzopen /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
    gzread /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
    BZ2_bzReadOpen /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
    BZ2_bzWriteOpen /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
    This led me to two conclusions:
    1. I needed to change the makefile to use g++ instead of gcc (due to the messages about the operators existing in libstd*c++*.so.6).
    2. I needed to include the libz and libbz2 libraries (by adding -lz and -lbz2) to COINLIBS.
    I made those 2 changes to the makefile and it built successfully with gmake! So now I'm off to go document this information on our wiki. Thanks for the suggestions -- they pointed me in the right direction and ultimately helped me resolve this issue. :)

  • Problem with make.rules

    Hi, thanks in advance
    I've installed Forte C 6 and i created a project , i've opened
    a file and when i've tried to build it i've found the next message:
    dmake: warning : can't find file make.rules ...: no such file or directory ...
    Should i create this file ?, if I should create it , what i should
    put into ?
    Thanks

    Hi, thanks in advance
    I've installed Forte C 6 and i created a project ,
    i've opened
    a file and when i've tried to build it i've found the
    next message:
    dmake: warning : can't find file make.rules ...: no
    such file or directory ...
    Hello i've already resolved this problem , i've found a file called
    make.rules and put into /usr/share/lib/make and i've modified some
    rules were exits into this file , and all run ok .
    Thanks

  • PROBLEMS IN MAKE TO ORDER PRODUCTION CYCLE

    Dear Sir
    When i m making make to order cycle for a material i hv maintained stratergy 20 for the material.then i created sales order for that material.then i run MRP using MD50.Then iwent to MD04.Then i converted planned order into production order it is giving me the error
    "YOU CAN NOT MAKE ASSIGNMENT TO MAKE TO ORDER STOCK"
    What needs to be done to solve this problem?
    With Regards
    Debasish

    Dear ,
    When you are creating Sales Order in VA01 , you should use Item Categoery as MTO order categoery .This is the link between the Production Order Created by MD50 while running MRP and Sales Order .Generally , this item categoery will assingned to a requirement type  and requireoment class.Both this requirement class and requirement type will be assinged to your planning strategy-20 in Define Planning strategy and strategy group in Customising .If this is missed , then there will not be any refernce of Sales Order in the Production Order .
    So check the right item categoery in the sales order and check what requirement type /requirement class u have assinged in the planning strategy group in the configuration .You will get the same error if you try to create the Production order directly by co08  if item categoery is not be assinged in the sales order as well subsequent link in the planning strategy .
    Regards
    JH

  • Problem with Make to Order sales order

    Hi,
    We are facing a problem with sales order which has Make to order item catagory, Rescheduling is not happening for the sales order of this type. However, we have taken up this issue with SAP and SAP has replied that MTO sales order are Excluded from rescheduling program.  SAP has suggested us to use CO28 to reschedule the Production order so that the changes can effect the corrorsponding sales order.
    We have observed that when sales order is created with MTO item category, production order is automatically created but when we see the Requirement list in MD04 for the material there is an Exception message as '20' (Cancel process).  After the production order is confirmed and goods reciept has done the quantity confirmed against the sales order is becoming ZERO and hence we could not able to create delivery for the sales order.
    We kindly request you to help us in this regard. This is creating a big problem for our business.
    Thanks counting on your support.
    Warm Regards,
    Sridhar Burugula

    Dear ,
    Did you check any sales order reference in your production order assingment tab? Did you check the cost roll up in sales order level based on the BOM and Routung created for dt FG?
    I believe the link between Sales Order and Production order lies in requirement Type and Requirement Class  in define planning strategy .
    Check in you make to order planning stratgey -SPRO-Define Planning Strategy -Make To Order .Here you should keep the correct Requirement type for customer(OVZH)  and requirement class (OVZG).
    Check and revert
    Regards
    JH

  • SIP Problem - Can make, but not receive calls

    I two E-Series phones (E51 and E71). The E71 is configured to connect over my WLAN to my corportate phone system. this works perfectly for making and receiving internal and external calls, however, my E51 can only make calls. both phones have identical settings with regard to my phone system but i wonder if there is a known bug and more importantly a workaround? i have also tried to configure a spare E65 and this presents the same problem as the E51.
    Any ideas? starting to get a headache over this....
    Many thanks
    Ben

    I am sorry I didn't get back to you but I have been away for a while.  I have discovered that when I turn the firewall off on my imac I can receive Facetime calls - turn it back on and I can't.  Seems a little silly that Apple's own firewall blocks Facetime.
    I wonder if anyone else has this problem.  I am a little concerned about having to keep my firewall turned off.
    Thank you very much for your help anyway.

Maybe you are looking for