Problem to migrate customer development

We have implemented NWDI for ESS/MSS successfully.
However, we found problem to migrate customer development into the NWDI
despite we have followed the SAP Note: 696084 and converted customer
development from EAR files into SCA file successfully. However, the
system prompted error as we click import-check. The error is :
Check Failed, because the sources are not contained in the archive
Please advise.
Thanks.
Edward

Uncar the SCA with sapcar, then add the necessary folders and files and use sapcar again to create a new SCA.
Edited by: Pascal Willemsen on Feb 2, 2010 9:18 AM

Similar Messages

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any availabl

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?

What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays

Problem utilizing Custom Development Management Cockpit

Hi all,
i'm currently trying to use the Custom Development Management Cockpit. When i open a Clearing Analysis project from TA CNV_CDMC it tells me that i have activated the statistics collection for one system. When i try to select this system (via "Define Project Landscape") as the statistics systems, it tells me that the statistics collection is not active on this system. Therefore, i'm stuck here...
Any hints would be appreciated.
Greetings
/Marc

Apply the composite/collective sap notes for CDMC 1348772 and 1456166. There is a fix in one of these collective notes for the problem.
Regards
Neil

Problem with custom development for documents in Record Management

In Record Management i have setup a record model. It contains Bor objects, documents, cases and so on.
Each kind of record managent object has it own requirements.
For the documents there is a requirement which demands that if the scandate is changed also the date till which the document must be helded in the system must be changed.
This cannot be done automatically via default SAP and i don't want to let the customers do it there selfs, to much risk they make errors, so this must be done via custom development.
The logic searches in a enhanced method for the right attributes from the importing list of available attributes of the particular document.
This is going well in the development system but when i transport it to the test system it fails. I have noticed that the content of a custom developed field ( for example ZSCANDATE) is loaded well but a default field like SRM_DOM_STORAGE_START not. The systems returns an error that the description of the attribute is missing. When i look in the DMWB ( DocuMent WorkBench ) i dont see errors, but afcorse there is one.
What can i have forgotten in my record management installation?
Offcorse the test system is a copy of a working development system, but you have also some things that are system dependent. and i think i have forgotten some of those..
If you have a idea let me know!
kind regards,
Anton Pierhagen.

Hi BalusC,
thanks for the quick answer. I tried it as you said and now I get a validation error in my h:messages tag on my jsf page after submitting the form. There are no errors in my JBoss console, just this one word on my jsf page. Do you have any idea what this could mean?
My two lists look like this:
private ArrayList<GroupBean> selectedItems = new ArrayList<GroupBean>();
private ArrayList<SelectItem> allGroups = new ArrayList<SelectItem>();The allGroups list gets filled like this:
for (GroupBean group: groups){
allGroups.add(new SelectItem(group, group.getName()));
}where groups is a simple collection of GroupBeans which I read from the database. This seems to be correct; at least my list of checkboxes shows the correct group names.
Now here is my selectManyCheckbox:
<t:selectManyCheckbox id="sensor_access" value="#{sensorBacker.selectedItems}" layout="pageDirection" layoutWidth="3">
<f:selectItems value="#{sensorBacker.allGroups}"/>
</t:selectManyCheckbox>Any idea what goes wrong here?
Thanks for your help!
Wiebke

Facing Problem in creating the custom development over Floor Plan Manager

Hi All,
I have made one custom development over floor plan manager, but while deploying the application i am facing the following error.Please help in this regards,
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
     at com.sap.pcuigp.xssfpm.java.MessageManager.handleException(MessageManager.java:259)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:104)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModelInternal(BackendConnections.java:323)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:256)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:154)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:237)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.connectModel(FPMComponent.java:842)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.connectModel(FPMComponent.java:1072)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.init(BackendConnections.java:141)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.init(InternalBackendConnections.java:233)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:182)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

you forgot to add the usage dependency in the DC metadata section in your DC, you have to add the XSS~utils and fpm as a used DC's as part of your DC, try to add those, if you already done that, so check where missed the adding of used webdynpro components in any of the VAC's or FC's,
Cheer,
Appa

Problems while migrating PDK applications from Portal 7.1 to Portal 7.3

Hi All,
I am facing a problem while migrating a PDK application from Portal 7.1 to Portal 7.3.
Since Portal 7.3 doesnt support PAR files any more it provided with a tool to convert the PAR to an EAR file and deploy the resultant EAR to the new portal.
I converted the PAR into EAR and deployed the file but the application is not executing. When I looked into the log files i found the following exception. The application is not able to identify the tag "documentBody". I checked the protalapp.xml and the "SharingReference" is properly maintained in the file but the error message suggests that its not able to fine the reference to the tagLib uri maintained in the portalapp.xml
Now my question is why is it not able to obtain a reference to the taglib? Did any one face similar problem previously. Can you please provide me with any document for migrating / developing PDK application for Portal 7.3
Parser [PRT] - JspParseException is thrown while parsing JSP file </SAP/sap/POD/J00/j2ee/cluster/apps/TestOrg.co.uk/TestOrg~cas~ptlsvc/servlet_jsp/CASPortalService/root/WEB-INF/pagelet/CASFramework.jsp> :
com.sap.engine.services.servlets_jsp.jspparser_api.exception.JspParseException: Cannot parse custom tag with short name [documentBody].
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.JspElement.customTagAction(JspElement.java:969)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.JspElement.action(JspElement.java:228)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.ElementCollection.action(ElementCollection.java:59)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.JspElement.customTagAction(JspElement.java:994)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.JspElement.action(JspElement.java:228)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.ElementCollection.action(ElementCollection.java:59)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.JspElement.customTagAction(JspElement.java:994)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.JspElement.action(JspElement.java:228)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.ElementCollection.action(ElementCollection.java:59)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.syntax.ElementCollection.action(ElementCollection.java:69)
at com.sap.engine.services.servlets_jsp.jspparser_api.jspparser.GenerateJavaFile.generateJavaFile(GenerateJavaFile.java:72)
at com.sap.engine.services.servlets_jsp.server.jsp.JSPProcessor.parse(JSPProcessor.java:272)
at com.sap.engine.services.servlets_jsp.server.jsp.JSPProcessor.generateJavaFile(JSPProcessor.java:196)
at com.sap.engine.services.servlets_jsp.server.jsp.JSPProcessor.parse(JSPProcessor.java:128)
at com.sap.engine.services.servlets_jsp.jspparser_api.JSPChecker.getClassName(JSPChecker.java:377)
at com.sap.engine.services.servlets_jsp.jspparser_api.JSPChecker.compileAndGetClassName(JSPChecker.java:306)
at com.sap.engine.services.servlets_jsp.jspparser_api.JSPChecker.getClassNameForProduction(JSPChecker.java:236)
Thanks in advance
PK

Hi Amit,
Thanks for your reply. I could see some progress after "thoroughly" going through those links. Thanks a lot (gave points too )
Now I am facing another problem. The application did deploy successfully but with a warning. When i checked the warning it says that the deployment was successful but can not be started.
The log file has the following error message.
Global [startApp] operation of application [newsint.co.uk/newsint~cas~ptlsvc] finished with errors for [5] ms on server process [2721950] [
>>> Errors <<<
1). com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application newsint.co.uk/newsint~cas~ptlsvc cannot be started. Reason: it has hard reference to the following resources, which are currently not available on the system: hard to SAPPORTAL/com.sapportals.htmlb (public) (f=true, cl=false); .
In order to start the application, components that provide the missing resources should be successfully deployed.
at com.sap.engine.services.deploy.server.ReferenceResolver.isResolved(ReferenceResolver.java:137)
at com.sap.engine.services.deploy.server.LifecycleController.startReferencedComponents(LifecycleController.java:173)
at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:200)
at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:166)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:421)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhases(ParallelAdapter.java:465)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhases(StartTransaction.java:605)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:1828)
I dont understand why is SAPPORTAL/com.sapportals.htmlb is not available. As per my understanding it is some thing that should be available with the portal server by default.
Any hints from any one?
thanks in advance
PK

Migrating R11 development from win NT to HP-UX QA

hi all,
we are thinking to have a r11 instance for development and in future we will migrate it to HP-UX for QA.
i will appreciate any suggestion on this as what are the efforts and risks involved and
there will be a lot of customization too .
can we do that ???????
thanks

It's high maintenance, but it can be done.
You will need to order new software for HP.
you should be able to bring the data over no problem.
Your custom forms & reports source will have to be transfered over and regenerated, as the runtime versions will not run...
When applying patches, you will need to obtain one patch for each OS...
and.. there may be additional license fees involved for the new platform.

Problem in Importing Custom Themes in WD

Hi,
I'm facing problem in importing custom themes in WD. I executed program WD_THEMES and imported my custom theme.
A message appeared as
Only non-importable themes found (with the wrong
version, for example), Do you want to view a
list of these themes?
There is problem in version. Current version is 7.0.14.1 but my version is having 7.11.3.2.0.
Is there are possibilities to change the version.
Please suggest on this problem.
Thanks,
JMB

hi ,
check out this thread :
Re: How to call custom themes for Web Dynpro ABAP Application?
http://ecohub.sdn.sap.com/irj/scn/index?rid=/library/uuid/7015b1f9-535c-2910-c8b7-e681fe75aaf8&overridelayout=true
to know how to call custom thesmes for Web Dynpro ABAP applications
check out this , how to edit the web dynpro themes :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d5ef40-465e-2c10-9ca9-f548bfc3f236&overridelayout=true
I wud further suggest u to post this question in Portal Content Development forum to get more inputs for ur query
regards,
amit

Upgrading PeopleSoft and Risks with Custom Development

My company's parent is on PS 8.8, and is trying to bring my company into their system. To do this, they are going to have to do a lot of custom development surrounding labor-based project costing.
From some of the PeopleSoft developers, I am hearing that it is risky to develop on this older platform, and then upgrade to version 9.1, because some of the customization will not carry over well and will need to be re-written. Their boss insists that this is an exaggeration, and it should not be a concern.
Can someone please tell me what the pitfalls are of doing heavy custom development on an older version with plans to upgrade in the immediate future?
Thank you so much.

Hi Alexandra,
I'll give you the details of attaching an application log to BPEM which are (Let say) gnerated by a Transaction.
Step 1: Define Business Process Area
Step 2: Define Business process code
step 3: Define Transaction attached to this Business Process Code
Step 4: Run transaction EMMA to view it.
I can write all the customizing for this here also however i would recommond a link which contains the cookbook of implementing BPEM.
Go to :
SAP service market place->sap for utilities->product information->Business Process Exception Management->cookbook & Guidelines->BPEM Cookook
<https://websmp101.sap-ag.de/solutions>
In this document go to the Section 4 (Customizing) here you can see all the steps in detail with example to set up the system for attaching an Application log with BPEM.
In case if you face some problem, revert.
Please assign the point.
Amit

Global list of all custom/developed objects

Hi all!
We need to get a list of all custom objects of a SAP systems.
First time we think accessing TADIR to get all repository objects of the system and after this access, get all atributes for any of the retrieved objects.
Example:
To a report, access TADIR and TRDIR dictionary tables. in TADIR use class of development custom or in TRDIR any of the user that don't belongs to SAP.
But this solution to the problem is very effort and we should access so too many tables for the objects to get their attributes.
Second time, we think filtering the objects using their namespace with FM TR_CHECK_NAME_CLASS, but this option jumps some objects, like VOFM generated objects or customer exits form VA01 transaction.
Do any of you know the way of extracting a list of all Custom/developed objects for a System?

Hi,
Just check if this suffices.
REPORT zobjects no standard page heading
TABLES:TADIR,TSTC,V_USERNAME,VRSD.
TYPE-POOLS:slis,VRM.
TYPES: BEGIN OF ittemp,
       object    LIKE tadir-object,
       obj_name LIKE tadir-obj_name,
       text      LIKE trdirt-text,
       author    LIKE tadir-author,
       devclass like tadir-devclass,
       name_text LIKE v_username-name_text,
       tcode like tstc-tcode,
       korrnum like vrsd-korrnum,
       END OF ittemp.
DATA: itfinal TYPE STANDARD TABLE OF ittemp WITH HEADER LINE,
      wafinal   TYPE ittemp.
DATA : name TYPE vrm_id,
      list TYPE vrm_values,
      value LIKE LINE OF list.
DATA:itfieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA:itrepid TYPE sy-repid.
itrepid = sy-repid.
DATA:itevent TYPE slis_t_event.
DATA:itlistheader TYPE slis_t_listheader.
DATA:walistheader LIKE LINE OF itlistheader.
DATA:itlayout TYPE slis_layout_alv.
DATA:top TYPE slis_formname.
DATA:itsort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER: PACKAGE LIKE TADIR-DEVCLASS.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM getdata.
PERFORM alv.
*&      Form GETDATA
      text
FORM getdata.
read the repository object table and link with username if found
SELECT tadir~object
        tadir~obj_name
        trdirt~text
        tadir~author
        tadir~devclass
        v_username~name_text
        INTO TABLE itfinal
        FROM tadir
        LEFT JOIN v_username
        ON tadirauthor = v_usernamebname
        LEFT JOIN trdirt
        ON tadirobj_name = trdirtname
        WHERE tadir~devclass = PACKAGE
        "'$TMP'
        AND ( tadirobj_name LIKE 'Z%' OR tadirobj_name LIKE 'Y%' ).
CHECK sy-subrc EQ 0.
loop at itfinal.
*TCODE FROM TSTC
select single tcode from tstc into (itfinal-tcode) where pgmna =
itfinal-obj_name.
*LATEST TRANSPORT REQUEST NUMBER FROM VRSD
select single korrnum from vrsd into (itfinal-korrnum) where objname =
itfinal-obj_name.
modify itfinal.
endloop.
delete itfinal where korrnum is INITIAL.
SORT itfinal BY author object.
ENDFORM.                    "GETDATA
*&      Form ALV
      text
FORM alv.
IF itfinal[] IS INITIAL.
    MESSAGE 'No Values exist for the Selection.' TYPE 'S'.
    STOP.
ENDIF.
DEFINE m_fieldcat.
    itfieldcat-fieldname = &1.
    itfieldcat-col_pos = &2.
    itfieldcat-seltext_l = &3.
    itfieldcat-do_sum = &4.
    itfieldcat-outputlen = &5.
    append itfieldcat to itfieldcat.
    clear itfieldcat.
END-OF-DEFINITION.
m_fieldcat 'OBJECT' ''   'OBJECT' ''       04 .
m_fieldcat 'OBJ_NAME' '' 'PROGRAM NAME' '' 40 .
m_fieldcat 'TCODE' ''    'TCODE' ''        20 .
m_fieldcat 'TEXT' ''     'DESCRIPTION' '' 70 .
m_fieldcat 'AUTHOR' ''   'AUTHOR' ''       80 .
m_fieldcat 'DEVCLASS' '' 'PACKAGE' ''      30 .
m_fieldcat 'KORRNUM' '' 'LATEST TRANSPORT REQUEST' '' 20 .
itlayout-zebra = 'X'.
itlayout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = sy-repid
        is_layout               = itlayout
       i_callback_user_command = 'LIST1'
        i_callback_top_of_page = 'TOP'
        it_fieldcat             = itfieldcat[]
        i_save                  = 'A'
     is_variant              = ITVARIANT
        it_events               = itevent[]
     is_print                = ITPRINTPARAMS
        it_sort                 = itsort[]
      TABLES
        t_outtab                = itfinal
        EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "ALV
*&      Form TOP
    Top of page for ALV Report
FORM top.
DATA:STRING1(70),
     STRING2(70),
     title1(100),
     title2(100),
     count(10).
describe table itfinal lines count.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
     EXPORTING
        i_list_type           = 0
     IMPORTING
        et_events             = itevent
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
string1 = 'List of Objects in Development Class'.
concatenate string1 ':' itfinal-devclass into title1.
walistheader-typ = 'H'.
walistheader-info = title1.
APPEND walistheader TO itlistheader.
string2 = 'Total No.of Objects'.
concatenate string2 ':' count into title2.
walistheader-typ = 'H'.
walistheader-info = title2.
APPEND walistheader TO itlistheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary      = itlistheader
    I_LOGO                   = ''.
    I_END_OF_LIST_GRID       =
   ENDIF.
CLEAR itlistheader.
ENDIF.
ENDFORM.                    "TOP
*&      Form list1
      ALV Interactive-
     -->R_UCOMM    text
     -->RS_SELFIELDtext
FORM list1 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN '&IC1'.
      IF rs_selfield-fieldname = 'OBJ_NAME'.
        READ TABLE itfinal INDEX rs_selfield-tabindex.
        SET PARAMETER ID 'RID' FIELD itfinal-OBJ_NAME.
        CALL TRANSACTION 'SE38' AND SKIP FIRST SCREEN.
      ELSEIF rs_selfield-fieldname = 'TCODE'.
        READ TABLE itfinal INDEX rs_selfield-tabindex.
        SET PARAMETER ID 'TCD' FIELD itfinal-TCODE.
        CALL TRANSACTION 'SESSION_MANAGER' AND SKIP FIRST SCREEN.
     ENDIF.
ENDCASE.
ENDFORM.
K.Kiran.

Migration From Developer 2.1 to Forms 6i/9i

Hello,
My client wants to migrate from Developer 2.1 to Forms 6i or to Forms 9i with C/S architecture (Sun Solaris 2.6). They are told (from Oracle Support) that they need to add a patch set before migrating. Has anybody migrated in this environment and what patch set was added?
Thanks,
Arun.

Hi,
3 things.
1. The forms 9i is NOT available for the client/server environment. Therefore if your customer insists on client/server environment then you need to upgrade to forms 6i (which is the final client/server version of forms/reports developer).
2. There are OS patches that you need to apply if you want to run forms/reports developer 6i on solaris 2.6. The complete list is available in the 6i installation documentation (you might find it also on the internet). If you upgrade the OS to solaris 8, then there is no extra OS patches required for forms/reports developer 6i. We are running 6i on Solaris 8 (with no extra OS patches).
3. The last available patch for forms/reports developer 6i is patch #10 which can be downloaded from Oracle Metalink. I did apply this patch for 6i on solaris 8 client/server environment and has not seen any negative effect so far.
regards.

Migration from Developer 4.5 to Developer 6i

Hello,
I want to migrate a Oracle forms 4.5 application to developer 6i.
The Forms 4.5 application has been built by using headstart 3.4.2. The application runs on a client-server architecture
Is it possible to migrate to developer 6i without changing the used headstart version and the architecture.
I already heard that we might be some problems with visual attributes in client-server environment ?
who can give me some more information about this combination of architecture and used software and tools ?

Hi,
I would contact Oracle Developer support.
This forum area of expertise is issues concerning migrations from non-oracle platforms to ORacle.
Regards
John

Blackberry Application - Custom Development

Hi,
I had created an application which uses the code generated from the MBO of Sybase Unwired Platform as datasource and I need to create the screen by custom coding. The aim is to display the list of PurchaseOrder Number in the first screen and when clicking on a particular purchase order number, it should show the details in the next screen. Now insead of display the po number in the first screen, it is displaying as
<packagename>.<DB>@493e1
<packagename>.<DB>@493e2
<packagename>.<DB>@493e3
But when double clicking this, the details are being displayed correctly. I had used KeyFilterField for displaying the array of po number in the first screen. Kindly help me to display the value of the po in the first screen.
Thanks and regards,
Rinzy Deena Mathews
Edited by: Rincy Deena Mathews on May 13, 2011 5:14 PM

Hi Hong He,
Thanks for the response.
I was doing the exercise of Custom development of Blackberry application using the following link. [http://infocenter.sybase.com/help/index.jsp]. As a part of this I had created a mobile application project named SUP101 in the sybase Unwired Workspace. As per the exercise in this link, i use the Customer and Sales_order MBO provided by the Sample database. After deploying the MBO to the unwired server, the next i need to do is the generation of code for this MBOs. Then i need to upload these codes to the Blackberry plugin for ecplise and need to generate the UI codes for the application. But during the creation of the generated code for the MBO, in the SUP workspace by selecting the project SUP101 and choose Generate code, I got stucked with an error.
Error (1 Item)
net cannot be resolved SUP101DB.java /SUP101/Generated Code/src/SUP101 line 65 Java Problem
The error is in the SUP101DB.java file which got created during the time of code generation.
_appName = net.rim.device.api.system.ApplicationDescriptor.currentApplicationDescriptor().getName();
I am using SUP 1.5.5 version.
Kindly help me to solve this issue.
Thanks and regards
Rinzy Deena Mathews
Edited by: Rincy Deena Mathews on May 5, 2011 11:21 AM

Planning Migration from Development Server to Testing Server

Hi All,
I am doing migration from development env to testing env. I am stuck in the middle of the migration. Anyone please guide me in this situation. Its very urgent for me. I am following below steps for the planning migration
1. Create a new database on Production RDBMS Server for your planning application.
I created the new database for my planning application.
2. Configure a data source on Production Planning Server.
     I configured the new datasource on planning.
3. Create fresh planning application on Production Server and Ensure the admin is the same as your planning application on Development Server.
     I created the new planning application on production server. Its working fine with admin login.
4. Go into the database tables for the planning app on Production Server and look at table HSP_USERS; store the SID value against user 50001.
     I save the SID value against 50001 in a notepad
5. Go into the database planning system tables on Production Server and HSPSYS_APPLICATION, clear out the version field for the application you have created.
     I removed the version for the application i created
6. Stop Planning.
     I stopped the planning services
7. Restore the planning application database on Development over the one created in the first step (to the Production Server Database).
     In this steps only, i am facing diffculities.
     How to take the backup of development database? (Here, i want to the take the database backup of planning application schema or entire oracle databat in development server)
     How to restore to testing env database
Please anyone guide me in this situtation. Please......
8. Go into the HSP_USERS table and update the SID for user id 50001
9. Start planning
10. Go to planning web and you should see your application when you try and log in it should take you to a migrate screen.
11. If you are requiring to migrate users as well, you will have to make sure you create them in Shared Services and then use the updateusers utility in the planning bin directory.
Thanks,
Lakshmi

Hi Mars,
Thanks for your reply. I did the same as you specified. I used Imp instead of import, exp instead of export.
7. Restore the planning application database on Development over the one created in the first step (to the Production Server Database).
I restored the Planning dmp here
8. Go into the HSP_USERS table and update the SID for user id 50001
Here, SID remains the same after restore the backup from the development server(SID same for Development and testing Server)
9. Start planning
I started the Planning Services.
10. Go to planning web and you should see your application when you try and log in it should take you to a migrate screen
I am facing problem here.
While login into planning application, its not redirect to migrate screen. Its normally login to the application
Thanks,
Lakshmi

Anyone doing extensive custom development?

Hello,
Is there anyone out there who has done a lot of custom development with the MDK? I have uncountered numerous bugs/features which are really troublesome, and would like to exchange stories. The biggest aggravation I have had so far is that I have to keep starting and stopping the Mobile Engine after doing a synchronization. Any work-arounds found here?
Bill

Hello Tim,
Thank you for responding. I have a number of problems with Mobile development. These are not simple matters. Let's focus on the issues one at a time. We'll worry about my synchronization problems a little bit later. This discourse should be very valuable to the readers.
Let's first deal with dependent and independent applications.
I have an application that uses SyncBo. This application provides a local Material Master on the device. This material master is a tiny slice of the actual material master that resides in CRM system. This application was developed using the SmartSync wizard in Eclipse and the SyncBO builder in CRM. I ran the wizard and plugged in the meRepMeta.xml file from the backend, and then modified/extended the generated code by adding search capability and other front end things. This application is working well. Let's call this the independent application.
I then started working on a dependent application. This application is looking up inventory, and therefore must access the material master on the device, without duplicating the material master or modifying it in any way. After the user selects the material he is interested in seeing inventory for, the application uses generic synchronization to get the inventory position.
I began the dependent application by copying my material master application and making extensive modifications to it. Perhaps this was not the right strategy. Nevertheless, I completed the application, and everything seemed to be working find.
Then I started to do some development testing. The first problem was that the materials in dependent application were duplicated. I also noticed that the material in the material master application were also duplicated. I am not sure what caused the duplication. I made some more modification to the dependent application, and the application began to exhibit intermittant behavior and eventually went down completely. That is where the application stands as I am writing this.
After extensive debugging, I see that the variable SYNC_BO_DESCR is set to null after the following initialization, causing the entire application to fail upon startup:
private static final SyncBoDescriptor SYNC_BO_DESC =
DESC_FACADE.getSyncBoDescriptor(SYNC_BO_NAME);
The variable SYNC_BO_NAME is the same in both independent and dependent applications, as is the file meRepMeta.xml. I tried a variation of the dependent application that uses the classes in the independent application to access the SyncBo. This variation did not have its own meRepMeta.xml file. This did not solve the problem.
What do I do from here?
Many thanks.
Bill

Problem to migrate customer development

Similar Messages

Maybe you are looking for