Problem to open my project PREMIERE CS6

Hello,
I have a problem to open my project !
When i launch my project PREMIERE PRO CS6 say :
"this project contained an impossible sequence has to open. No file of preconfiguration of previsualisation of sequence or codec is associated with this kind of sequence"
Someone has a answer to help me ?
Thank's to your help

Try this:
FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

Similar Messages

Premiere crashes as soon as i open a project. CS6 and CC both

I have Adobe Premiere Pro CS6 and CC. They have both worked for about a month, in the trial version and now they both don't. I can open premiere and it opens up fine. I can see my recent projects and open one. When I open the project I have between 2 and 60 seconds until it shuts down. If I go into manage cloud settings in the bottom left corner of Premiere CC, Premiere stays open. But only until I close the settings window and then it closes again. I get almost no error codes. While opening it sometimes says that mercury playback was used last time and does not work now due to hardware or something along those lines. CS6 gives me a Workspace.cpp-209 error sometimes. I am on Windows 7, 8GB ram, Intel(R) Core(TM) i3-2100 CPU @3.10 GHz 3.10 GHz, NVIDIA GeForce 210 Display adaptor. Please Help, I can not find anything on google.
Ps. I bought Premiere Pro CC today.

I uninstalled Adobe Premiere CC 2014, Adobe Photoshop CC 2014, Adobe Media Encoder CC 2014, and i tried to uninstall Adobe creative cloud. For some reason it said uninstalled with errors. I also uninstalled the whole CS6 suite. Now I reinstalled Adobe Creative Cloud, Premiere Pro CC, And Adobe Media Encoder. Premiere Pro and Media Encoder installed with errors again. Here is what I got, basically saying that Microsoft Visual C++ couldnt install.
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s)
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.5677 {512B6D21-18F9-11E2-93C1-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1601
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\INDIVI~1\AppData\Local\Temp\{813E01FB-8172-4290-AC83-299714F0CFC6}\PremierePro_ 8_LS20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.5677 {539B5BB0-18F9-11E2-BBBC-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1601
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\INDIVI~1\AppData\Local\Temp\{813E01FB-8172-4290-AC83-299714F0CFC6}\PremierePro_ 8_LS20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1601
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\INDIVI~1\AppData\Local\Temp\{813E01FB-8172-4290-AC83-299714F0CFC6}\PremierePro_ 8_LS20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.325 {55B82130-18F9-11E2-8D43-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1601
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\INDIVI~1\AppData\Local\Temp\{813E01FB-8172-4290-AC83-299714F0CFC6}\PremierePro_ 8_LS20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
Since there wheere 0 fatal errors i tried premiere. Nope, no change.
So I did what the text told me to. I tried to manually install them. That didn't work because the windows installer service was not running. I made that service start up and then manually installed all the Visuall C++ that it told me to. After successfully installing them all I restarted and tried Premiere Pro again. Still the same thing happened. I am very much out off ideas now, but i hope i gave you the info that can help, and maybe i overdid the info.

XDCAM-EX problem with .MOV files on Premiere CS6

Hello!
I've been working in a video project on Premiere CS5 with video files .MOV from a JVC camera and from a Sony XDCAM EX. I've installed the Premiere CS6 TRIAL. The project has been converted: I get to watch and edit the .MOV files from the JVC Cam, BUT I can't load the media .MOV from XDCAM EX, It says the codec is missing or unavailable... I got the same problem with some .DV files working before on CS5...
I looked for the codec info and I found this one: MediaCoreQTCodecRulesCS6.xml
It shouldn't be working?
Why if all the files were working with Premiere CS5, They are not with Premiere CS6, being this one the latest version of the software? Is it due to be a trial version of the software?
I would really appreciate your help on this issue!
Have a good day!
Zoila

Officially you need FCP installed to work with XDCAM EX Movs. Are you on a mac or PC?
However, this is an update for quicktime on macs that gives you the XDCAM EX codec:
http://support.apple.com/kb/DL1396
Not sure if there's an equivalent for PCs.

Cannot open any projects Premiere Pro CC

Hi,
I am trying to open a project that I created for a corporate client as they need it in a different format.
To my horror it would not open. I tried opening all my other projects and I keep getting the message "This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type".
The client is a news website and they are under tight deadlines.
This happened after I was asked to sign in again to my creative cloud account as creative cloud was telling me that I had not purchased any software.
It is such a disappointment.
Regards,
Joe.

FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

Error with HD projects premiere cs6

hello everybody,
i got the full version of premiere cs6 and it run perfect so far. but since a while, I only can work in a normal PAL project. If I will create a project in HD or export a sequence in maybe an mpg4, premiere shut down and I don´t know why.
What could I do?????
Thanks for your answers!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
BSOD shutdowns http://forums.adobe.com/thread/1427408?tstart=0
http://blogs.adobe.com/kevinmonahan/2014/01/13/computer-shuts-down-with-premiere-pro-or-af ter-effects/

Problems with "Open other project" in menu builder

Hi everyone,
I have a series of projects that I want to link together
using the menu builder of the "Skin Editor" dialog.
I create my menu items, and for each item choose "Open other
project" in the "On click" dropdown. I then choose the project that
I want the menu item to open. For this example, lets say I chose a
project named "Viewing_Patients"
However, when I publish the project, run it, and then use the
menu to open the next project, it just opens up a browser window
trying to access the URL "
http://Viewing_Patients.htm/
Why is that?
To check my sanity, I created a Click Box in one of the
project's slide where I chose the exact same configuration - "Open
other project" for the "On success" dropdown, and the
"Viewing_Patients" project as the project to open when the box is
clicked.
And this works fine (it opens the "Viewing_Patients" project)
Why is my menu failing but not my click box?
Thanks very much in advance for any help!
- eriiki - tubbs -

Hello Slothrop206,
Try the following steps:
1) Change your Action to be "Open URL or file"
2) Key in the relative URL to the movie you are attempting to
link. If it is in the same directory, simply key in the file name
of the .swf you are attempting to load.
3) Publish and test.
Let us know if this works for you.

How do I open a project in CS6 when it's apparently become too large (1.68 GB) to load?

I have a project that was recently sent back to me by someone who was working on the audio. When it was sent to me it was around 217 MB. After working on the project for a few more days before sending it out for color correction and additional audio work, I'm all of a sudden unable to load the project. My guess is that it has become too large to open, because now it is 1.68 GB. I don't know how that happened. I haven't applied any additional effects or brought in more media. All I've done is make trims to the picture and merged 3 sequences. I'm trying to figure out how I can open the project and, if I do need to make it smaller in order to continue working on it, is there a way to do so without losing the work that I've recently done? Thanks!

I'm trying to "import select sequences" from that project into a new project but it won't load. The loading bar is stopping about a quarter of the way through, same as it did when I recently tried to load the project normally. The loading bar has been sitting there at a quarter full for about 20 minutes now. A friend of mine tried to load the project (I sent him a zip file through Dropbox.) onto his computer yesterday and couldn't get it to open either.

Opening a Adobe Premiere CS6 project in CC

Hiya,
I've got a 20 minute HDV film I edited in CS6 but am trying to open in CC (v8.0) Everything seems to import ok with no errors, but the main sequence is all out-of-place, see image below.
Does anybody know what the issue is here? and how to correct it?
thanks in advance,
Jamie

thanks Ann,
I tried importing into a new project, but still have exactly the same issue...

Problem with opening recent projects

Hello all,
I've been working on a project on FCP since july and I've been saving it to an external HD since then.
There's been 3-4 other projects I've worked on along the way, and I've tried to keep everything organized and saved properly (I.e. I always set my scratch disk to the external before editing and saving)
Every once in a while I will open FCP after plugging my external in to edit my project and it will not open in the bin!! When I go to file > open to find the project there are no recently saved projects that I had worked on the day before but instead months ago!
In short, what happened to my project file? I tried searching my external and even my laptop's HD to look for the most recently modified/saved project but to no avail!
Is there anyway to retrieve it?? I made many important edits the other day and I hate the idea of starting all over losing months and months of edit time!!

Problem solved I Found the sequence! It turned up in another project's folder!

Imovie, problems with opening a project

I have imovie '08 and I mistakenly edited a film using this program before realizing how terrible it is. I edited this project and then saved it on an external hard drive. Now I am trying to open it again in imovie (I have also tried importing it) and it is not working. The file is a iMovie Project and I have been able to open up all the clips that this project uses, they are in my "event library."
I also have the older version on imovie: imovie HD, and I also have Final Cut Pro 6. I got both after I realized this version of imovie is worthless. If there is anyway to bypass the whole imovie '08 problem and just open them up in Final Cut, this would of course be ideal. However, I have not been able to figure this out, and I can't even open up this project in the imovie program that it was uploaded and edited in.
Thank you for you time and patience,
Michael

acelx--
Maybe if you explained things a little more. . .
How are you installing your new programs?????
Do you just open the .dmg file, open up the application's icon and go from there, or
do you take the application's icon and then drag it into the Application's folder and open
it from there??? or what?
Are you just talking about updates??
I may be way off base, but why are you trying to "make both of the windows show at the same time?"

Problems with opening/creating projects

Hi all, this is my first post so Welcome
I have a problem with Photoshop CS4 Extendet. After installing it under Windows 7 when I'm trying to start a new project or open a graphic in Photoshop the only thing which happens is a gray window of project without any graphic, without possibility to work on it etc. I know that graphic is loaded but I can't work on it. When I'm trying to move/large window, it crashes. Here you can see what I see when I load any graphic: http://img231.imageshack.us/img231/6120/61404388.jpg - you can see that photograph is loaded in layers menu section but in window it doesn't appear.
I have used this Photoshop under Windows 7, even same computer some time ago, but with different hard disc. And then it worked properly without any problems. I don't know why now after installing it I have such problems. What can I do? Is it a metter of drivers for graphic cards ot something like that? I'm useing the latest drivers for graphic card and all drivers for Windows and it's components are the newest one.
Here is ma computer specification:
Processor Intel Core i7 920 2.67GHz, 6GB ram, two graphic cards NVIDIA GeForce GTX 285, motherboard Asus P6T Intel X58 Windows 7 Home edition 64 bit.
What should I do now?

As is so often suggested here, check the nVidia web site for updated video drivers for your card. Chances are very good they have already fixed this problem.
-Noel

I have some problems importing a imagesequence in Premiere CS6. The online help tells to import, but I can see thats possible. I have an export option in Premiere, but in V/3 I can't find it. I have no problems in my CS6..

When I render Max files, I use an older computer with Adobe CS3.
While the other computer is working, I use my old, which have Mastercollection CS3.
In the help file, I am told to "import" the images, but if I follow the explanation, I can see its for new versions, because Premiere CS3 haven't the "import" option.
Do anyone know how to import an 130 image image sequence in Adobe Premiere CS3.
Thanks a lot in advance.
Best regards
Michael

Your drive is formatted with the NTFS file system. OS X can read but not write to the NTFS file system. There are third party drivers available that claim to add the ability to OS X to write to an NTFS partition. I have not tried them and don't know if they work.
The only file system that OS X and Windows can both write to natively is the FAT32 file system.

Premiere CS6 Indexing and Pending Problems - HELP!

Gentlemen,
Any help you can offer on this would be terrific.
The problem is.....I have begun editing a feature in CS5, we set up a different project for each scene, 48 in total. Then upgraded to CS6.
When I open the projects in CS6, some of them work fine. However, most of them don't, and they have the same problems, which are;
1. All the media doesn't load. The status bar in the bottom left tells me there is xx "Remaining" (See Pic)
2. The files don't index. Above the project window the message "Items to Index XX" appears.
However, when I save one of these incomplete projects in CS6 and then open it in CS5, there are no problems. My scratch disks for 5 and 6 are the same.
I've searched and searched and this appears to be a common fault, but I can't find a solution that works for me. I've tried the following;
1. Uninstalling and re installing Premiere
2. Updating to 6.0.3
3. Cleaning media Cache
4. Replacing the missing files and then reloading
5. Temporarily removing all the preview files
6. Leaving a project open for 16 hours to see if it slowly indexes
None of this works. If anyone has the answer I would be very gratefull, I don't really want to restart 48 projects and I don't really want to go back to CS5, as CS6 is much better for the Matrox system.
I'm using MXF footage, from P2, 720p. I have noticed that this problem doesn't occur with projects that use other footage types.
My system is.....
Windows 7 Pro 64bit
8gb Ram
Many Thanks in advance for any help you can offer.

Thanks Jim,
just tried that.....unfortunatley no luck.

How to open Premiere CS6 files with Premiere CS5.5

Hi, I've ran into a problem I recently got the Premiere CS6 trial and had done some projects on it that I started in CS5.5, but now the trial expired and many of my projects are stuck as CS6 files. Luckly I was able to put the trial on one of my older computers so i can still access the files for now but its extremely slow and the rendering takes forever so I dont want to render out any projects on that.
I know that Premiere is not backwards compatible but is there anyway to export the file or convert it to a CS5.5 file? I need to export the project by tommorrow and my old computer wont have it done by then. I will be buying CS6 in a couple weeks here but right now I cannot afford to. Any help would be greatly appreciated.

Use the original project files from CS5.5. You had to enter a new file name for CS6, so using the CS5.5 names will solve it under CS5.5. It will not solve the editing you did, that is lost (unless you dare to modify the XML files).

AE CS6 freezes while opening a project file

Hi, I have been working on a project for past three days and this morning when I try to open the project, AE CS6 freezes at 66percent. And my MAC stops responding too. I need to force shut AE to get back in order.
This is what I have already tried:
- Renaming the project file. No go
- Opening the project in another installation of AE. No go
- Importing the file in another new project. No go
Note that the last work I did in that project was using the dynamic link between AE and premier pro. I imported a premier pro sequence into AE, put it onto an AE composition and color corrected some footage. Then I imported the AE composition into PP and exported the final movie. This morning when I try to open the AE project where I imported the PP sequence, I am unable to do so.
Could this be that the dynamic link has a bug that caused a memory issues?
Please help me troubleshoot !!!
Thanks
Anshul

Flush the caches from the prefs. And by all means learn how to use versioning, incremental saving and backups...
Mylenium

Problem to open my project PREMIERE CS6

Similar Messages

Maybe you are looking for