Problem to open SLM from Internet over EP 7.01

Hi.
Im new to this Forum an I have on Question.
I have installed
Apache reverse proxy -> EP 7.01 -> SOLMAN 7.0
Add to the Portal diffrent iViews of Solman as Webdynpro or TA iView.
If I open in my EP iView SOLMAN_WORKCENTER, or iView with WEBDYNPRO from the Internet i recieve an Error. All other Portal Content are running well.
It looks like that the response comes from the SOLMAN System drictly and not over the EP. But I dont want to published my Solman to the Internet directly.
I dont have any Ideas to solve this problem.
Thanks anybody fpor Help.
Regards
Sven

Hello Miikkal,
You need to enable SharePoint class in IE. Please follow this
blog and follow this
article.
Once, this is done you can Enable all the IE settings to load for Intranet and Trusted zone settings
Put your site in compatibility mode and trusted zone
Also, make sure that 2 versions of Office suite is not installed on the system. Eg. Lync 2013 and Office 2010 on one single machine
What happen when you by pass your TMG server. To do this we need to make host entry for URL directed to APP server IP Address.
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Similar Messages

Problem to open websides from the meny in a Ipad

I have made a website with dreamwaver CS 5,5 and everything
working just fine, but on a Ipad it is sometime problem to open
page from the drop meny? Is there anybody who can tell me
why it is so? is there any solution ?
Try it if you have access to Apple Ipad Air, http://www.ornskoldsvikshamn.se
Greatful for answers
Mats

The problem is the Spry Menu system that was included in your version of DW.
Spry is not good at handling touch displays since it requires a mouse to make the drop down menus appear and those devices do not have mice.
This is one of the reasons Adobe abandoned Spry back in 2012.
You would be better served using a different menu system, either jQuery or pure css. Do a search in Google for either and you will be given many, many options to choose from. If you aren't comfortable with the copy/paste and minor tweak coding from the how-to instructions, you can also obtain the Menu Magic extension for DW from Project VII that would allow you to use DW's design view interface to make the menus.

Play music from internet over aiport express connected speakers

I am playing my Itunes music via Airport Express over connected speakers successfully. Is it also possible to play music from internet over these airport express connected speakers? For example playing the sounds of a video over the speakers which are connected to the Airport Express? Thx in advance for any helpfull suggestions.

Does Airfoil do what you want?
(48253)

Problem with 9.3 Reader when opening files from internet

I keep receiving the message 'There is a problem with Adobe/Acrobat Reader. Please exit Adobe Acrobat/Reader and try again' when trying to open come files on the internet. I am able to open files from my hard drive and some files from the internet. I have uninstalled and re-installed Reader, but get same result. Any ideas?

As I posted on Feb. 19 this is what works for me. OS is Windows 7 64-bit, AdoveReader 9.3.1., IE8.
Open Adobe Reader,
            go to edit menu,
            under Preferences
            go to Internet, uncheck "Display pdf in browser"
The pdf files then open, but not in the browser
or if you have Google tool bar installed:
On the Google tool bar
                        click on the options icon (a wrench)
                        go to Tools
                        scroll down to the bottom
                        uncheck Translate
Or uninstall the Google tool bar.
Pdf files open without a problem in Firefox.
All of these solutions are easy.
Good luck,
Too Green

Problems with open an Indesign-Document over Network

Hallo,
we have a specialized problem with opening indesign-documents over network. Our users works with windows-pc (windows7) and adobe CS5 and CS6 and they will use there documents which are on our macserver 4.0 which works on OS X 10.10.2.
Sometimes the usurers become this Message
Wouldn't work indesign proberly on windows with documents which are on a macserver?
Please help me.
best regards
chris mueller

@Naga Sai J – you cannot open an InDesign CS4 file in the previous version.
But you can export an exchange file format for InDesign CS3.
Go to File/Export and chose INX for export: "InDesign CS3 Interchange-Format (INX)"
That .inx file could be opened with InDesign CS3.
After opening the .inx file, examine it well!
Some things might have changed (things regarding to newer or changed features from InDesign CS4).
Uwe

Problem in Open Workbook from Database dialogue

Hi,
at my customer we migrated to 'OracleBI Discoverer 10.1.2' and it works fine with one exception.
In the item 'View' of the 'Open Workbook from Database' dialogue there i am able to choose one of four values. If i move with the mouse over the wanted value, the value is cleared - but it is choosable. Is this a bug or how can i change that mystic behavior?
Regards,
Martin

Hi,
i use the Java version 1.6.0_22.
Following versions of Discoverer are installed:
OracleBI Discoverer 10g (10.1.2.1)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18)
Discoverer Model - 10.1.2.48.18
Discoverer Server - 10.1.2.48.18
End User Layer - 5.1.1.0.0.0
End User Layer Library - 10.1.2.48.18
Regards,
Martin

Problems with opening files from older iMacs on my iMac6, 1

I can't open files from my older iMac Power PC G3 on my iMac6, 1. I keep getting the error message "file is used by Mac OS X and cannot be opened." The file types that won't open are .psd, .doc, and even some .pdfs. I was trying to transfer info from my old computer via flash/jump drive and nothings seems to work. PLEASE HELP!

I can't open files from my older iMac Power PC G3 on my iMac6, 1. I keep getting the error message "file is used by Mac OS X and cannot be opened." The file types that won't open are .psd, .doc, and even some .pdfs. I was trying to transfer info from my old computer via flash/jump drive and nothings seems to work. PLEASE HELP!

Opening documents from internet explorer

Hello Firends,
"I´ve problem trying to open documents (odt, doc, xls, ...) with OpenOffice since Internet Explorer?? it takes forever to open, two minutes, however, if you open Firefox or from Windows Explorer opens at the same time.
I tried it with Windows XP SP3, Internet Explorer 6 and later 8.
This time, as I mentioned, is about two minutes, however, activating the QuickStart reduce opening times to 30 seconds, but still very slow. The problem is that I need to work well in Internet Explorer, so that I can not use Firefox or other browser.
I've been mulling over a long time and I can not solve. The version used is 3.2 OpenOffice itself can be helpful.
Thanks in advance for the input.
Greetings!

You have three variables: browser, open office, and document being opened.
Assuming you are opening the same document to get your timing comparisons, we ca drop that as a variable
For browser, you have either Firefox or IE. For document reader application you have open office.
--------|--open office --
firefox | fast
IE | slowConclusion, IE is slow. You may just have to live with it. (Or else buy a faster PC. That is what MS tools are good for, justifying PC upgrades. 8^)
HTH,
ed

IE Problem with opening XLS from remote host

So Im having a problem opening/saving my generated Excel Spreadshhet in Internet Explorer on a remote client. Basically, I click on my button to generate the spreadsheet, it then sends the data to my servlet that generates the document and then sends it back in a response. When I do via localhost everything works the way its supposed to, I get the document to open in IE. However if I try this from another machine, the document doesnt open; when tried in Firefox remotely everything works. So I then started down the road of reviewing my response headers and havent had any luck.
      resp.setContentType("application/vnd.ms-excel");
      resp.setContentLength(document.size());
      resp.setHeader("Pragma", "no-cache");
      resp.setHeader("Expires", "-1");
      resp.setHeader("Accept-Ranges", "bytes");
      resp.setHeader("Content-disposition", "inline; filename=report.xls");
      OutputStream outputStreamToClient = resp.getOutputStream();
      document.writeTo(outputStreamToClient);
      try {
        outputStreamToClient.flush();
        outputStreamToClient.close();
      } catch (Exception e) {
        if (DEBUG) {
          System.out.println(e.getMessage());
      }My next step was to run a wireshark trace and verify that I was in fact getting my generated document sent to the remote machine and I was able to confirm the response was in fact sent and that all my necessary headers were in place. Im open to any suggestions as I'm quite stumped at the moment.
Matt

So I made the changes for removing the extra headers as was recommend and still didn't have a problem. Now I did realize I forgot to mention that this is all being executed from an Applet on the client side. I build up my request dynamically in the post string and then send it via the connection I create. Now I did actually notice when I reworked my DEBUG statements that on the applet side I would get the following
AppletConnection.getContent() warning: no content-type
However, I have a servlet that generates a PDF based on the same data and that works just fine off a remote client and also returns the above "no content-type" error. Below I have the code from the Applet side that is actually sending the data to the servlet and receiving the response. I just wanted to reiterate that I am assuming the content-length field is in fact valid because I am able to successfully send a spreadsheet to a remote client if they are using FireFox as opposed to IE.
      final URLConnection appletConnection = url.openConnection();
      // inform the connection that we will send output and accept input
      appletConnection.setDoInput(true);
      appletConnection.setDoOutput(true);
      // Don't use a cached version of URL connection.
      appletConnection.setUseCaches(false);
      appletConnection.setDefaultUseCaches(false);
      appletConnection.setRequestProperty("Content-Type", "application/x-www-form-urlencoded");
      //Write object to servlet
      OutputStreamWriter wr = new OutputStreamWriter(appletConnection.getOutputStream());
      wr.write(post);
      try {
        wr.flush();
      } catch (Exception e) {
          System.err.println("Error: Could not write object to servlet from client!");
      try {
        appletConnection.getContent();
      } catch (IOException ioe) {
        System.err.println("AppletConnection.getContent() warning:"+ioe.getMessage());
      }Thanks,
Matt

Problem with opening RAWs from LR3 in CS5

Hi,
I came back from 3 weeks of shooting and was working on some picture when I tried to open one picture in Photoshop CS5 and instead of as usual opening the image in TIFF, CS5 opened the OPEN window to find a file ?!?!?!
Someone could explain me what happened and how to solve this problem.
I tried to check many preferences, and tried to open and close many times CS5 and LR3 but nothing, I am lost !
Thanks for the help,
Best

Hi,
I use the function Edit in from the LR menu Photo> edit in PS CS5. And after CS5 opens but asking for the file...Ok probelm solved without any answer.
I tried again to open and now it opened the file without any problem...Very strange !
But thanks !
best

Problem when running webdynpro from Internet explorer 8

Hello Dear all,
I created a webdynpro and everything i created is right. when i load the webdynpro (F8) to internet explorer 8 i can see the webdynpro . But the IE 8 screen shows no reaction. I thought that my webdynpro was wrong. But i ran the webdynpro from my officemates computer and in his IE 8 the mentioned Webdynpro works perfect! The problem is only the Internet explorer 8 .
I would appreciate your soon answers.
Alfito

I read this website
https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1530264
and i set the zoom to 100% and my problem is solved. How absurd! i almost uninstalled the browser. Best regards
alfito

Illustrator cs6 "this file cannot be found" problem when open file from network

I used to install the trial version of Illustrator CC on my desktop and then when the trial run out I decide to go with illustrator CS6 instead, So I decide to buy &
install Illustrator CS6 on our desktop and everything seem to be fine except
the problem is our .ai file is located on the network shared drive of the design team,
When we try to open the file from the network drive with illustrator CS6, it said "This file cannot be found"
- we try to copy the file from network drive to our desktop and file can open without problem
- if we directly double click the file from the network drive to launch the illustrator CS6 with that file. It's also fine, no problem at all.
- but if we open the illustrator CS6 first and try open.. and then browse to that file on network, then "This file cannot be found" happen again.
- Illustrator CS6 have no problem open file in the local harddisk.
- Illustrator CC never have this problem open file in our network drive, try reinstall the Illustrator CC trial again and it can open without problem
- I try using Adobe CC Cleaner tool to remove everything before reinstall the Illustrator CS6, still no luck.
- Try remove the Adobe relate folder in user/user/Appdata and then reinstall, still no luck
- Try right click and open with --> Illustrator CS6 , yes if we double click the file directly it's ok, but as mentioned if we open illustrator first then browse for the file, the problem happen.
Did I miss anything to fix it ?

the same thing happend to me,
in my office the same folder with hebrew name, I can open files
on my laptop the same folder with hebrew name, I cannot open files.
I know its about the folder because when I put the files in a different folder, it open them.
how can I fix it without changing the names of my entire work folders?
there must be a different between my two computers.
thanks for your help

Problem with opening browser from Java app.

Hi guys, I'm not sure if this is the right place to post this, so please excuse me if I'm wrong. I'm trying to open an html page (it's a help file) from a Java application. I'm currently using java.awt.Desktop. browse(URI uri); which gets the job done, as long as I don't pass any parameters to the page. (e.g. http://www.site.com/site.html?param1=1). Doing that gives me an IOException. Is there a way to do this without using the JNLP API?

This is the file path copied directly from the browser's address bar:
file:///home/riaan/EMCHelp/Help.html?page=WorkFlowActivityCategory.html"{code}
Which causes the app to throw an exception, but when I change it to:
{code}file:///home/riaan/EMCHelp/Help.html{code}
it opens Help.html in the browser. That's why I thought that it might be the query that's a problem. Perhaps it's a simple issue of not escaping a character or something that I failed to see.

Adobe Acrobat Standard and Pro - dialog prompt when opening PDF from Internet Explorer 9

Good morning.
I am having an issue where our ends users that have either Adobe Acrobat X Standard (AAXS) or Adobe Acrobat X Pro (AAXP) cannot open a PDF within Internet Explorer 9 without being prompted by a dialog box to OPEN, SAVE or SAVE AS. Our user that have Adobe Reader X (ARX) only are ok. The ARX users can click on a PDF link within the browser and it will automatically open in a new tab. However, the AAXS and AAXP users will click on that same link, but are then prompted with a dialog box to either OPEN, SAVE or SAVE AS. Has any one else seen this before? We would like it to be so that all users - no matter what Adobe PDF program they are using of the 3 mentioned - can open a PDF link by just clicking on the link and no additional dialog options appear.
The ARX users have the same Internet settings within the Adobe preferences as the AAXS and AAXP users. The check box is checked to have PDFs open within the browser, which they do, but that dialog box always appears for AAXS and AAXP users. Any thoughts?
Thank you.

Thanks for the reply. I stumbled across something today after posting. I had already known that If the ARX user also had one of the other products (AAXS or AAXP), then they would get the dialog box. Here is what I just figured out: if the user uninstalled ARX and re-installed (still having both ARX and AAXS or AAXP in the end) then they no longer get the dialog box. It seems like perhaps its an issue the AAXP and AAXS are overwriting something in the registry.

Problem Viewing/Opening PDF from Outlook attachment

Some PDF files will open just fine. Other PDF files will give me this error: "Can't create file. Right-click the folder you want to create the file in, and then click Properties on the shortcut menu to check your permissions for the folder."
Can someone please help? I am using Adobe Reade version 9.4.1 and Outlook 2003.
Thanks!
TDGunz

Hi,
The workitem is not completed, it can be viewed if logged on to the SAP system externally (not from the Icon in outlook mail).
The issue is it cannot be viewed and the SAP screen hangs when it is clicked from the Icon in the Outlook mail.
Thanks,
Sandipan

Problem to open SLM from Internet over EP 7.01

Similar Messages

Maybe you are looking for