Problem to Play and edit Audiofiles in Captivate CS4

Hi
i'm using the e-learning suit cs 4. I think there ist a Bug in Captivate 4.
when i imported a audio-file to a slide i can't listen to it. in the edit odr soundedit mode.
when i make a preview the sound will be played.
this is a big problem. in captivate cs 3 there wsn't this problem and i need a help.
thank you and sorry for my english
Mike

Hi Mukul,
thank you for your answers. Unfortunately it wasn’t the fix of my problem.
1.    I have tried with different audi-files and every File could be played in winamp and
mediaplayer and also when ein produced a swf.
2.    The Audioedit dialog can be open
3.    My PC
Vista 32 BIT 3 GB Ram
Captivate 4 Build 1598 out oft he eLearning suit cs 4
I have made a upgrade from Captivate 3 to the elearning suit
Captivate 3 is still running on this pc and there ist the Sound
I can’t find a problem. But I need the sound in captivate 4. :-(
Regards
Mike

Similar Messages

  • Problems importing and editing audio in Captivate 4

    Hello.
    I'm using Captivate 4, and am currently working on a video about 83MB in size.
    As I am importing audio (in mp3 format), I'm noticing that Captivate is cutting off my audio files, and garbling them up.  What I end up getting is something akin to scratching records for a narrative.
    I saw that there were other people who mentioned similar problems for Captivate 5, but I can't seem to find any existing posts about this problem for Captivate 4.
    Would someone please point me in the right direction, or give me some suggestions as to how to fix this problem?
    Thanks,
    Ottawagirl05

    Welcome to our community
    First off, while you say you are using Captivate 4 trial, hopefully you are aware that you may not actually purchase that version. Adobe now offers version 5.5 and if you choose to purchase, that's the version you will get. (Unless, of course, you are purchasing the older version from a software reseller. I guess that's possible)
    At any rate, the trial is fully functional. Nothing (other than time to use it) is restricted.
    I do suppose that you might be missing a patch that would possibly address an issue.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • The problem to retrieve and edit Universe from server

    I use CmsResourceService.retrieveUniverse to retrive *.unx from server to local.
    Then , I use LocalResourceService to load *.blx and cast to RelationalBusinessLayer and throws exception in my program.
    The exception is
    NestedException Interface requested not found : csLIB
    com.sap.tools.commons.exception.NestedException: Interface requested not found : csLIB
      at com.sap.tools.commons.exception.NestedException.create(Unknown Source)
      at com.businessobjects.mds.services.parser.decoder.DataFoundationSQLDecoder.getPRM(DataFoundationSQLDecoder.java:81)
      at com.businessobjects.mds.services.parser.decoder.DataFoundationSQLDecoder.<init>(DataFoundationSQLDecoder.java:96)
      at com.businessobjects.mds.services.parser.decoder.UniverseSQLDecoder.<init>(UniverseSQLDecoder.java:40)
      at com.businessobjects.mds.services.parser.EncodeDecodeHelper.decodeExpression(EncodeDecodeHelper.java:301)
      at com.businessobjects.mds.services.helpers.BindingHelper.decodeExpression(BindingHelper.java:250)
      at com.businessobjects.mds.services.helpers.BindingHelper.decodeResultExpression(BindingHelper.java:264)
      at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.getResultExpression(MdsToSdkBusinessLayerConverter.java:336)
      at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.copyBusinessItemProperties(MdsToSdkBusinessLayerConverter.java:296)
      at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.createSdkItem(MdsToSdkBusinessLayerConverter.java:251)
      at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.copyMdsToSdk(MdsToSdkBusinessLayerConverter.java:212)
      at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.copyMdsToSdk(MdsToSdkBusinessLayerConverter.java:217)
      at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.createSdkModel(MdsToSdkBusinessLayerConverter.java:146)
      at com.sap.sl.sdk.authoring.businesslayer.internal.services.BusinessLayerModelToModel.createSdkModel(BusinessLayerModelToModel.java:31)
      at com.sap.sl.sdk.authoring.local.internal.services.LocalResourceServiceImpl.createSdkBusinessLayer(LocalResourceServiceImpl.java:187)
      at com.sap.sl.sdk.authoring.local.internal.services.LocalResourceServiceImpl.loadInternal(LocalResourceServiceImpl.java:168)
      at com.sap.sl.sdk.authoring.local.internal.services.LocalResourceServiceImpl.load(LocalResourceServiceImpl.java:130)
      at com.sap.sl.sdk.authoring.samples.EditUniversesDemo.editUniverse(EditUniversesDemo.java:82)
      at com.sap.sl.sdk.authoring.samples.EditUniversesDemo.main(EditUniversesDemo.java:38)
    Caused by: com.sap.connectivity.cs.core.CSError: Interface requested not found : csLIB
      at com.sap.connectivity.cs.extended.ImplementationManager.getImplementation(ImplementationManager.java:151)
      at com.sap.connectivity.cs.extended.ImplementationManager.getConfiguration(ImplementationManager.java:195)
      at com.sap.connectivity.cs.extended.NLDBProvider.populateMap(NLDBProvider.java:49)
      at com.sap.connectivity.cs.extended.NLDBProvider.getManager(NLDBProvider.java:157)
      at com.sap.connectivity.cs.extended.Provider.getEnvironment(Provider.java:93)
      at com.sap.connectivity.cs.extended.ConnectionServer.JobProfile(ConnectionServer.java:532)
      at com.sap.connectivity.cs.api.trace.EnvironmentLogger.JobProfile(EnvironmentLogger.java:609)
      at com.businessobjects.mds.services.relational.PrmProperties.getDbParameterSet(PrmProperties.java:1394)
      at com.businessobjects.mds.services.relational.PrmProperties.loadFunctions(PrmProperties.java:1437)
      at com.businessobjects.mds.services.relational.PrmProperties.loadParameters(PrmProperties.java:1411)
      at com.businessobjects.mds.services.relational.PrmProperties.<init>(PrmProperties.java:155)
      at com.businessobjects.mds.services.relational.CsService.getPRMProperties(CsService.java:1159)
      at com.businessobjects.mds.services.parser.decoder.DataFoundationSQLDecoder.getPRM(DataFoundationSQLDecoder.java:79)
      ... 17 more
    Caused by: java.lang.UnsatisfiedLinkError: no cs_jni in java.library.path
      at java.lang.ClassLoader.loadLibrary(Unknown Source)
      at java.lang.Runtime.loadLibrary0(Unknown Source)
      at java.lang.System.loadLibrary(Unknown Source)
      at com.sap.connectivity.cs.library.ConnectionServer.<clinit>(ConnectionServer.java:330)
      at java.lang.Class.forName0(Native Method)
      at java.lang.Class.forName(Unknown Source)
      at com.businessobjects.connectionserver.ConnectionServer.getImplementation(ConnectionServer.java:428)
      at com.businessobjects.connectionserver.ConnectionServer.getInstance(ConnectionServer.java:132)
      at com.sap.connectivity.cs.extended.ImplementationManager.getImplementation(ImplementationManager.java:144)
      ... 29 more
    But If I use IDT Tool to create unx in the local and publish to the server. I use the same program and I can load blx in the program without exception.

    Hello Iris,
    If you are using Eclipse IDE to run the application for Editing local business layer, please follow the below instructions:-
    Add the jars in the class path by configuring the build path of your project & add all the jars from the location "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\java". These jars contains the interfaces which is requested by Semantic Layer based applications.
    Go for Run->Run Configurations->Arguments->VM Arguments. Define the location of your connection server such as -Dbusinessobjects.connectivity.directory="C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer".
    Go for Run->Run Configurations->Environment. Declare a new environment variable path specific to the java class & point it to the location C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86 which contains all the BusinessObjects DLL to make the communication between UNX universe to the database.
    Build & Clean your project & run your application once again.
    If you are using the standalone deployment, you can try the below steps:-
    Create a batch file for compiling the java program containing Semantic Layer Java code.
    declare the classpath & define all the libraries in the classpath from the below folder:
    C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\java
    C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\SL SDK\java
    define the java compile command with the name of the java class along with the class path entries.
    set the environment variable to point the BusinessObjects DLLs: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86
    define the java run command to run the java program along with the JVM argumnets: -Dbusinessobjects.connectivity.directory="C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer
    Please refer the attached txt file, convert the attached .txt file to .bat file, do the necessary changes according to your environments & try to run the batch file.
    Hope it helps.
    Thanks,
    Shailendra

  • Need help playing and Editing F4V files

    We recently started streaming our church services using FME. Our streaming works fine, however we can not read our recorded files. Does any one know of any tool that will read these files?

    Use the F4VPP tool to flatten the file before you can view it in Flash Media Player or Quicktime or VLC.
    http://www.adobe.com/products/flashmediaserver/tool_downloads/
    I also heard you can edit the files with Quicktime Pro (top and tail) simply rename them .mp4 and rename back when done.
    Matthew Quinn
    Systems Coordinator
    Digital Media Department
    t: 0151 293 8720 | m: 07887 735 405
    f: 0151 293 8722 | w: http://www.liverpoolfc.tv/
    a: Unit 14, The Matchworks, Speke Rd, Liverpool, L19 2RF
    Please consider the environment before printing this email

  • LSMW - Problem with copied and edited Project - missing new field

    I have copied an LSMW project to a new Project to load a Journal Entry to FI - Transaction Code FB01.  I added a new field VALUT (value date) to both the Maintain Source Fields and Maintain Field Mapping Steps.  The data with the new field shows up in Display Read Data, but it does not show up in Display Converted Data.  This new field is the last field in the csv file, i added it to the end of the Source fields.
    I think perhaps i need to create a new Batch Input Session, because when i run the Start Direct Input Program, one of the messages that comes up refers back to the original project name - not my renamed Project. --> "Session Name OLD PROJECT NAME was opened"
    (The steps available on my screen do not include a "Create Batch Input Session" step, as some of the posted answers show)
    Thank you for your help.

    Hi Sandra, Thank you for your reply.  I am not sure what you mean by restart.  if you mean go through all the steps- yes, i went through all the steps again. I also exited out of the LSMW screen completely and went back in to my project and redid the read and convert data again, just to be sure, but i am still missing the new field in display converted data. 
    The only change i made to the Project was to change the name of the Project, subproject, and object and to add a field to the Source Fields and Field Mapping - for field mapping i used the default rule of Transfer(move)and my source and code seems to be correct - in that i followed the example of all the other fields.  i also changed the name of the file where my new csv file was located, but i did not change the names of the read and converted data files. Perhaps i need to change something else? It seems to me that it is still using the instructions from the old project to convert the data.  Thanks again.

  • Problems with print and colour profiles etc in CS4

    This is driving me round the twist. until recently all was fine, but lately everything seems to have got screwed up. I am trying to print images produced in Corel painter, which have been placed etc into an .ai artboard. (CS4)
    No problems until recently, but now there seems nothing I can do to make it print accurately. There are so many colour and print profile choices available, I don't know which to pick as there doesn't seem to be a default.
    The screen image adjusts to any profile or colour management settings I change, but the actual print image never bares any relation to that screen image.
    Work I have printed previously,( and have not adjusted settings for )without any problems at all.. are now printing inaccurately.
    I'm using a Canon MP640 inkjet printer by the way.
    The same is true with printing from PS and any other application.
    I haven't made colour settings through Bridge for all adobe apps' as none of them so far seem to be accurate.
    Even if I saave an image to pdf or jpeg, and print from preview, it still comes out with the colours badly changed.
    Please, please help.. I can't work this out and I have got to print!!!

    willspring,
    Just to make sure: As I understand it, things worked in CS4, not only in earlier versions.
    To reset settings in Illy, you may Move the folder, but it may not solve the issue (the simpler but less thorough resetting being to Ctrl+Alt+Shift/Cmd+Option+Shift during startup).
    Have you made any changes, such as printer driver or whatever, between success and failure?

  • Best plug-in or app to play and export avi flicks

    Hi
    What is the best plug-in for FCPX, QT, or app to play and export avi flicks? Can they play in FCPX or FCP 7?
    best
    elmer

    AVI is a wrapper format like MOV. It would depend upon the codec used to encode the video if FCPX would be able to open it or not. I believe, in general, if you can open the movie file in QT, you can open it, play, and edit it in FCPX.  That said, AVI is a Windows format and there are a lot of codecs in use in Windows that are not likely to be compatible with the codecs you have installed with Quicktime.  First try opening the file in Quicktime Player. If you are in need of a codec to play the file, one of the easiest ways to install a lot of these codecs at once is via Perian (it is "end of life" at this point, but still works just fine in Yosemite.) You can download it here : http://perian.cachefly.net/Perian_1.2.3.dmg
    I have been able to import, open and edit AVI files in FCPX (more specifically, ones encoded with XVID/MP3).

  • Capturing and editing on my primary drive?

    I have two-500GB drives in my new Macpro, and I do not see how I could ever fill up the drive with the OS and applications installed (seems kind of a waste). I have read that it is not recommended to capture and edit video on the drive that contains the os and applications, and it should be done on a secondary drive.
    1. What specifically is the problem with capturing and editing video on the primary drive?
    2. Will partitioning the drive with the OS and applications installed, and capturing to the separate partition make a difference?
    Thank you.

    1. OSX creates a great deal of disk activity. Not only is the disk trying to feed the OS and the application commands, it also hosts the System Cache where RAM overflow goes to live until needed.
    Adding the demands of REAL TIME media spooling (read/write) to this really busy disk can overwhelm it - leading to dropped frames etc.
    2. Partitioning does not solve it. It is still one physical disk and subject to all the same demands as spelled out in #1 above. Partitioning may make some sense in organizing material but it will do nothing for system performance. Indeed, there is some evidence it will reduce realtime performance.
    If you need more drive space, for fastest performance, get a PCI based esata card and add a series of external sata devices. FW800 drives will work quite well as well - especially for DV, HDV and uncompressed SD.
    good luck.
    x

  • Problem with  Color Ghosting in CS6 but Not CS4 ?

    I have HD Footage from my Canon HV30 camcorder and when I open a project and edit the video in CS4 there is no color Ghosting, but when I open a project with the same source files and project settings in CS6 I get a nasty color ghosting. Has anyone seen or experience this issue before?   I have included and example of the same frame in each of the programs.
    Help!!

    Unfortunately I don't have another camera with HDV output. I could borrow another camera but it would be AVCHD.
    I'm not sure about any issues with the media and if there is a way to get this in front of a developer type person who would be knowledgable about the differences in how PP CS4  converts HDV source into a digital file vs how PP CS6 converts the HDV source into the digital file.  Does the PP capture process use a hard coded CODEC that is different between CS4 and CS6?
    I work in telecom and there is a huge effort to comply with standards, but interoperability is still a big issue even when there is a common governing standard. 
    Because my PP CS4 software converts and displays the "Standard Compliant" source media properly (without any Ghosting/Interlace artifacts)  my experience troubleshooting technical issues tells to ask the question  "What changed between things working and things not working?"  I am drawn to focusing on the difference introduced with CS6.
    As addressed earlier in this thread, it could possibly be interaction with display drivers (ruled out with updated drivers and because the exported files have the issue as well?). It could have been an issue with not having the latest PP CS6 software (eliminated with software update).  The only thing I have left is an interoperability issue with either my camera output having some varient in standard compliance that is causing the issue or the PP CS6 software  having some issue in interpreting or processing the streaming media input that PP CS4 did not have.
    So for my situation, here are the specifics: I am using a Canon HV30 Video camera set for 1080i  30p HDV format to tape. Within the camera I have it set for shutter priority, at 1/250 Shutter speed. Now we know there are ~30 frames per second so this faster "shutter speed" must be interpolated/converted to blend into the 30 frames. 
    To replicate/test the situation I would need (or someone else with one) a Canon HV20, HV30, or HV40 setup with the same shutter vs aperture priority recording some fast moving action.
    My bottom line is I really like working in PP CS6 and don't want to have to stay in CS4 because of this issue.  Any ideas how to escalate this issue to the developers or any other ways to move towards a resolution?   
    Thanks,

  • Problems opening and editing Olympus OM-D E-M1 files

    Hi,
    I have a new Olympus OM-D E-M1 camera. It produces (pretty great) video's of the .MOV format, H.264.
    However, I am not able to open, view and edit these files in Premiere Pro CS5.
    Some more information:
    - Video format .MOV, H.264, 1080p 29.97fps
    - Windows 7 machine, 6Gb ram, reasonably fast video card and quad core chip. Editing of other video formats with the same HD specs is no problem (e.g. mp4 or avi)
    - Video's play just fine in Quick Time and in the proprietary Olympus Viewer 3 software and in Windows Media player
    - Video's will import and I can put them on the timeline but very slowly.
    - They usually do not open in the Source monitor, or show just 1 frame
    - The sound sometimes plays fragments (as if it is reading the files very slowly)
    - It does not play a preview
    - I can export a sequence that I put on the timeline, for example to an MP4 which is then fine, but rendering and exporting takes forever, up to hours for 4 mins of film
    I am thinking that Premiere Pro somehow does not know where to find the right codecs for importing these videos, because they must be on my computer somewhere with QuickTime and Olympus Viewer. Anyone know how to tell PP how to find/use these?
    Please let me know if you need any more information to help me solve this problem.
    Thanks, Bastienne

    I made a screen dump of the folder in Olympus Viewer that is named Movie.
    It has some files which seem to be involved in codec. Please take a look if there is anything useful there .
    btw there is only one folder in Movie (AsFilter) and there is also only one folder in AsFilter (MP4), so there is no folder called MOV or similar, strangely enough.
    There may be one other interesting .dll file called CodecHelper.dll in the Olympus Viewer 3 root.

  • CUIC 8.5 - Problem with Save As and editing reports

                CUIC 8.5.2.  I have users set up with Roles of Login User, Dashboard Designer, Report Designer, Report Definition Designer and Value List Collection Designer.  They also have Read Execute and Write Permissions.  Problem is, if they run a stock report, the Save As, and Edit options on the report are greyed out and inactive.  What is missing in order for users to be able to create custom reports?  Any help would be appreciated.

    I might have ran into this at some point last year, I think (but I could be wrong) if you setup the write permissions for  the user group, it should then fix it for everyone.  You might want to give that a spin in case you have a lot of individual users.
    Glad the solution worked though.  Thanks for the points.
    david

  • I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

    I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

    At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
    When editing in Photoshop just add a box or mark on the image, for your tests.
    - If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
    - If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

  • The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

  • IPad 2 music does not play and high resolution pictures get corrupted when syncing through iTunes on 64 bit Win 7.  Anyone else have a problem with iTunes corrupting music and pictures from 64bit machine?

    Works from a 32 bit XP machine.  Does not work from a 64bit Win 7 machine.  It's 64 bit that seems to be the issue; the music won't start playing, and for pictures, it's when they're more than 768x1024 resolution that they appear very low resolution and/or corrupt.  None of the normal tricks work (different user account; different USB port; different USB hub controller) and the problem is replicable.  The music and JPEG and PNGs, however, are fine if transferred via a Windows network to a 32 bit machine ie it's not the music/image files.

    Dear Katrina, the problem has finally been solved, with the help of a computer-savvy friend of mine who came round this afternoon. As a courtesy, and to thank you for all your help in this matter, I want to share the solution with you.
    A piece of the puzzle was missing, as you said, and it lay in the tenth line of the XML document I relayed to you....
    <key>Music Folder</key><string>file://localhost/C:/Users/Simon/Music/iTunes/iTunes%20Media/</string>
    My friend spotted that the command string contained a sub-folder of the iTunes folder called "iTunes Media". iTunes was expecting to find all my music there, but that folder didn't exist.
    So I created a new folder called "iTunes Media", and moved all my musical content into it, leaving all the command files in the original iTunes folder.
    Then I moved the "iTunes Media" folder into the "iTunes" folder, so that it was a sub-folder of the latter.
    Then I re-opened iTunes and - joy of joys! - everything works once again. I am re-united with all of my music, and without having to make over 14,000 manual location exercises. I can't tell you how exciting that is.
    The mystery is solved, and what had me so puzzled seems obvious now. Thanks again for your help. Without you I might never have got to this point.

  • I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

    I have problems with my films that become slightly jerky after I have imported
    and edited them in iMovie and then burned them onto a DVD using iDVD.
    I can see the weak jerkiness when panning in both laterally
    and vertically.
    I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
    When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
    Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

    I have problems with my films that become slightly jerky after I have imported
    and edited them in iMovie and then burned them onto a DVD using iDVD.
    I can see the weak jerkiness when panning in both laterally
    and vertically.
    I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
    When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
    Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

Maybe you are looking for

  • ACS 5.3 Different password for privilege exec mode

    This is what I would like to do for our Core Routers. Not too familiar with ACS, so please excuse me if I don't provide you will all the details. Right now I have ACS 5.3 which is tide to Active Directory. When a user logs in they use there AD creden

  • Receiver  Mail adapter Error

    HI  All    i    am doing   a   scenario     SFTP    to mail adapter,   i  am sending  a    file    to    SFTP ADAPTER  and   Mail adapter   send  the   mail  to    clint,   i am   using  java  mapping ,   i  have  checked  the message in    RWB  mesa

  • Need configure wifi, but adobe air cd won't install, why?

    Am trying to configure wifi after installing new motorola wireless modem sbg901 and am trying to run the cd wifi instrux. It asks to install Adobe Air, but it won't install. Why can't I install Adobe Air?

  • Ipad shows email but I do not have any how do I get rid of it

    How do I get rid of the email notification when I do not have any

  • New DW CS6 Update

    What the hell Adobe? You do this "update" and now my workspace is gone that I custom created. Fine I can fairly easily fix that even though you screwed it up. BUT... But now I look to add items to my Favorites Menu bar and you REMOVED a bunch of item