Problem to print character mode report in Landscape

I set orientation and select but it still print in landscape character mode. When it print in character mode report in portrait format its ok.
I Set and use all the option in report to print in Landscape in character mode.
I ask you please to give me information about the printing definition files and its codes, how to use printer codes. I use two printers
1. Epson LQ2180 2. HP 6L
I used HPLWIDE printing definition files put its still print in portrait format not to print in landscape.
Thanks for corporation
I will wait ur reply...
At this address
[email protected]
[email protected]

Hi,
This sounds like a similar problem that I had (and still having). It was (is) a Bug. Go to metalink.oracle.com and reference this bug#1413754. See if this is your problem as well. My only work around was change the format of the file instead of using character mode I am now using PDF. Which is working fine for me.
~Vannette

Similar Messages

URGENT: Problem in printing Character Mode Report in Chinese Version

Hello,
I am working with Reports 6i. i have developed one Character mode report. This report is working and printing fine in Windows 2000 Server (English Version). But, this report is not working properly in Windows 2000 Professional (Traditional Chinese Version) where i have compiled report in Chinese Version Machine. And, i am getting the Preview properly. Main problem is at the time of printing. I am using EPSON LQ - 2070 Dot Matrix Printer.
Please help me on this issue.
Thanks in advance.
S.Sudhakar Sankar.

Try printing to file first and ensure that the output is correct in something like "notepad" with the appropriate font.

Character mode Report in Landscape Format

Hi All,
I want to print my character mode report in landscape format. But I am not getting it. Everytime I get print as Portrait. I am printing from live previewer of report builder.
I am using Oracle 9i and Report builder 6i (6.0.8.11.3).
I have done following settings:
System Parameter ORIENTATION=Landscape
DESFORMAT=DECLAND.PRT (Given by Oracle)
In the object navigator I have set following properties for Main Section
Width=11
Height=8.5
Orientation=Landscape
Char Mode Width=132
Char Mode height=66
I have done same settings for Header Section and Trailer Section. Please help me.
Thanks in advance.
Regards
Mona

You will need to edit prt files to add the printer escape sequences to change the page orientation to landscape. Printer escape sequences can be obtained from the printer manual, or the printer vendor.
For instance, HP printer escape codes can be obtained from the HP website under the printer support links.
The steps below describe how to print a landscape, character mode report from a Windows NT PC on an HP 4100N Printer. The 4100N is a dual mode printer that can use either PCL or Postscript printer language.
1. Use a web browser to navigate to the HP website and obtain the printer escape codes for the HP 4100N. If you are unable to locate the HP4100N printer, look for generic PCL information. The HP site also includes detailed information on the printer command syntax.
2. The HP4100N printer command for landscape page orientation is "ESC&l1O" - where ESC indicates escape, '&' (ampersand) is the parameterized character, 'l'(lower case letter l) is the group character, '1' (number one) is the printer value character and 'O' (upper case letter O) is the termination character.
NOTE: The HP documentation uses "EC" to signify the escape character.
It also suggests pressing CTRL and the letter P together, then
releasing both keys and pressing the ESC key. If this is done in
a dos editor, a left arrow will actually be displayed on screen.
This character cannot be interpreted by Oracle Reports and will
cause printing errors if used in a .prt file. Instead, just use
the letters "ESC" to indicate that the code that follows is a printer
escape sequence.
3. Make a copy of the wide.prt file and rename it to "mywide.prt."
4. Add the page orientation escapes to mywide.prt file:
printer "mywide"
height 66
width 132
before report esc "&l1O" *** Puts Page in Landscape Orientation***
after page control(L)
after report esc "&l0O" *** Resets page orientation to Portrait ***
return control(M)
linefeed control(J)
SYNTAX NOTES: The escape sequence must be enclosed in double quotes ("). The above comments regarding page orientation are used to clarify where the escape codes gets added, but they should NOT be used when editing
the actual .prt file.
5. Save mywide.prt file to the $ORACLE_HOME\report60\printers\ directory.
6. Go to Windows PC -> Start -> Settings -> Printers and open the properties for the HP printer. Ensure that the option to "Always Spool Raw Data" is checked. This option is usually under the General Printer
Options, or Spool Options. On Windows NT, you must have Administrator privileges to change this setting.
7. Test running the report to the printer and specify desformat mywide. It is not necessary to include the file extension (.prt).
8. The report will now print in landscape orientation.

Printing Character Mode Report On Oracle 9i AS - Application Server

Hi All,
Even though I have put this problem in Reports Forum,
I thought it fit to put forward this problem in Forms Forum
since Forms Forum is being accessed by a large number
of developers across the world.
Now the problem :
I have developed a report in Character mode that runs in
hundreds of pages. The output will be taken on High speed
Dot Matrix Printer since the client requirement is fast printing
& economical printing. That is the reason to develop this report
in Character mode & not Bitmap mode. This report works
fine in Client-Server environment.
However, the problem lies in the Web Server environment.
The same reports will be run on Oracle 9i AS. Since the
browser supports only HTML & PDF format, Character
mode reports faces a major problem.
Can anybody help me to resolve this problem ??
I would like to remind you again that the constraint is NOT
TO USE LASER PRINTERS.
Thanks.
Mayur
[email protected]

Hi Shahmayur,
I too am facing the same problem. If your problem is cleared then please let me know, so that i can continue the work.
Rgds
Bhaskar

Page size problem while creating character mode report

Hi All,
I've designed a report in character based layout design. The report needs to be loaded into NOTEPAD and then EXCEL sheet. I need maximum page width for this report. I kept page size of width 23" in layout design and pulled the fields so that to get maximum room. When I run the report and load it into NOTEPAD, I don't see the page width, meaning that it gives me normal 140 column size which is of course not what want.
Please can someone provide some assistance in this scnario.
Thanks - Zahir

The character mode and bitmapped page sizes are different, and independant of each other.
For character mode you need to set the width in the following places:
1) In the appropriate layout section property palette (assuming you're on 6.0 or above).
2) In the .prt file that you're referencing in desformat to produce the output.
If you set the width in both these places to the size you want you should be okay.
Alternatively, you may want to look at the delimited format to generate output for spreadsheets.
Hope this helps,
Danny

How to make character mode reports in reports 6

iam finding difficulty in setting the properties for the character-mode reports in reports 6.0!!how do i preview and print character mode reports in landscape mode
(132*66)
thanks in advance.
jitendar

thanx very much for ur advice sasha !!
i changed the layout model to character mode but the main problem is that how do i change the pagesize of the screen to 132*66!
at presenti can view only 80 chars screen!
is there any answer to it !!! can i change this setting so as to view my 132 column report on the screen first and then print on the printer !!
thanking in advance,
jitu :-)

Character mode report cuts off last character on a line

Reports 9i, Windows 2003 Server. Printing character mode reports to IBM 6400 printer. I have a variable text column (multi line) and randomly the last character on a line gets cutoff. I'm using Courier 10 as my font. It is only 1 character that ever cuts cutoff. Any ideas? I'm desperate.
Tom

Hi,
change the reports height& width for landscape /portait.
and go to edit margin in layout.
see the layout and move to left if it has lot of gap in left side.
we can get correct output if the right side border is upto 8.2.
try with this.
--Basava.s

How to send a character mode report from Oracle Form 10g to a printer.

how sending a character mode report from Oracle 10g report to a printer.
I'm sending to a printer located in the network
i have theses parameter report
desformat = prtname
desname=??????
destype= ?????
mode=character
i would like to preview the report before to send to a printer
slds

ACCOUNTING SYSTEM
2006-2007 From Date : 01-JUL-06
Printed On : Friday August 31 2007 11:13 AM To Date : 30-SEP-07
G A/C. Code 99-99-9999 Description: xxxxxxxxxxxxx H
-- DOC. # -- -- DATE -Chq/Slip# ---------- N A R R A T I O N -- -- DEBIT -- -- CREDIT -- -- BALANCE --
Opening Balance: -999,999,999.00 Cr.
G *** Total *** 0.00 0.00 -999,999,999.00H
================= ================= =================
when i run character mode report in browser then display this output properly
but sir problem is that when i print the report
G(use for bold)
is not working
means not print in bold format in printer
same character print G
do you have any idea when i print through browser to printer G for bold purpose its work to printer ?

Problem in Character Mode Report (Urgent)

Dear All
i m designing a character mode report
and when i preview it ,,, it will display
different report font which is big in size
and width so it is not fit in the designed columns
can any one help me ,, y this problem is exist
though i m using Dot matrix printer EPSON DFX-8500
printer.

Hi..
If you are directly giving Print from previewer..you need to set printer to 10 cpi (if you want bigger font) and 12 dpi to compress the larger font..
CPI is character per inch so in one inch 10 chr or 12 chr can fir acc to setting.
If you are uploading file on Oracle Apps then you need to set fonts if needed in concurrent manager,printer setting,Style,fonts ..
"But the hardware setting is vewry imp..set the font in DRAFT mode"..
tarak desai
[email protected]

Print SSRS Server Report in landscape or portrait mode directly(without report viewer control)

Hello,
.Net 4.0\VS2010\C#\ssrs 2008 on Sql Server 2008R2
Having a problem printing a Server report while controlling the orientation and the size of the emf rendered to the physical page.
I have the report cutting off in both landscape and portrait modes. I'm passing the following deviceinfo to the render function:
string DeviceInfo =
@"<DeviceInfo>
<OutputFormat>EMF</OutputFormat>
<PageWidth>8.5in</PageWidth>
<PageHeight>11in</PageHeight>
<MarginTop>0.25in</MarginTop>
<MarginLeft>0.25in</MarginLeft>
<MarginRight>0.25in</MarginRight>
<MarginBottom>0.25in</MarginBottom>
</DeviceInfo>";
return DeviceInfo;
string mimeType; string fileExtension; Stream pageStream = serverReport.Render("IMAGE", deviceInfo, firstPageParameters, out mimeType, out fileExtension);
No other settings seem to have an affect on controlling the output to printer or pdf. i.e. The deviceinfo params fed to server report's render function are all you get. I think my original code comes from an MSDN or CodeProject example. I'm not
inventing anything new here.
Links below indicate similar problems but they are looking at the issue from just landscape mode. Seems like I ought to be able to squash or expand the image to whatever size I specify, separate from the 'page' size. Please let me know what i need
to know to make these reports print without bleeding onto 2 pages or slicing off the right side of the document image.
http://stackoverflow.com/questions/25652415/cant-print-ssrs-rdlc-report-in-landscape-mode-directly-to-printer-using-suggest
https://social.technet.microsoft.com/Forums/sqlserver/en-US/06a9b432-c8a5-4952-a07c-867742a26c47/print-rdlc-without-report-viewer-either-in-portrait-or-landscape?forum=sqlreportingservices
print ssrs rdlc report in landscape mode directly
Thanks!

Hi
FraterJoanni,
Thanks for posting in MSDN forum.
I am not expert in SSRS. You should get better response in SQL Server > SQL
Server Reporting Services, Power View forum.
After take a look at the similar threads links as you posted above.
The conclusion is we needn’t tell the program o this report is landscape not portrait. If the width is larger than the height, the report will be printed in landscape; otherwise, it will be printed in portrait.
>>Links below indicate similar problems but they are looking at the issue from just landscape mode.
But in C# forum, we only from the point of code, code looks OK to me.
A similar blog talking about this
Controlling Page Size in a Reporting Services Report
And I have got the default page size in the US is Letter, 8.5in x 11in. In other parts of the world A4 (8.3in x 11.7in) is the standard.
65: //build the device settings (A4 8.3 × 11.7)
66: string deviceInfo = string.Format("<DeviceInfo><PageHeight>{0}</PageHeight><PageWidth>{1}</PageWidth></DeviceInfo>", "11.7in", "8.3in");
67:
68: //get report bytes
69: result = rs.Render(format, deviceInfo, out extension, out encoding, out mimeType, out warnings, out streamIDs);
70:
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Printing of Character Mode Reports on 3 tier on Dev 6i

Has anyone done character mode printing of reports on Dev6i? We are facing problem of REP: 3002. We have already loaded Orarrp on server and client and also tried changing the service property from log on as System Account to Log on as Administrator and also vice-versa, but nothing seems to work.
Any help will be appreciated.
Plz repond to email: [email protected]
B.Suryaprakash

The first thing to do is to make sure that you can print a character mode report on the server box just using the rwrun60 executable.
If you can do this then you should take a look and make sure that the user that's started the reports server has access to the printer that you're trying to print to (you seem to have changed from the localsystem log on to Administrator, but are you sure that Administrator can access those printers).
I think that orarrp is a red herring here - and I'm not sure why you're trying to set it up.
Hope this helps,
Danny

6i character mode report migrate to 11g , printing result were incorrect in the same matrix printer?

Hi All
We got stuck when our 6i character mode report migrate to 11g.
We use the same PC to test, when run 6i report(character mode with 200 column) in legacy system, report result were correct in our matrix printer ,
When running in 11g, if we directly print report via report builder (without preview), result were correct.
But running report via preview/screen mode, printing result were incorrect ( not 200 column width).
We try to adjust PC's printer/paper setting , but our-defined printing option never appeared in printer dialog.
Is anything(config or some setting) we forgot to do in this situation ?
Thanks for all your patient response!
Hendry

Hi Shahmayur,
I too am facing the same problem. If your problem is cleared then please let me know, so that i can continue the work.
Rgds
Bhaskar

How to modify & use Printer Defination files for Character Mode Report

How can use & modify printer defination files for changing formats & orientation in character mode report. I donot know how to use printer defination files I tried to set the system parameter (Desformat) but it doesn't work.

I m also faced same problem that u face,
If u want to make character mode report so plz follow these instructions:
1. Set the properties of Report Name Node in Character Cell is Yes.
2. Change the mode of the System Parameter Mode is Character.
3. Goto the Layout---> Main Section Properties and set the Character Report Width and Height like 132 and 66
4. Create Formula Column and write this code "RETURN(CHR(14));"
5. Goto Layout Model and map this formula column into Header of the Body Like If ur Company Name is "ABC COMPANY" attached with field and map Formula Column.
5. Goto Printer Definition File DFLT.prt open in NotePad and set width and hieght that u set in Main Section of Report.
6. At Last u Run the Report with Some System Parameter or User Parameter and View as Character Mode Report.
In My Case I used EPSON LQ2180 Printer
So, U Ask More Qustion and u have more knowledge About character mode report Plz Mail me at this address.
Shahid Shafi
[email protected]

Character Mode Report Print in Developer 6i

How i can create character mode reports for efficeint printing on dot matrix printers. I m not asking about the Character Mode Template(in the report wizard). And how i can convert the existing reports to Character Mode.
I am using Reports 6i.

Please post this question in the Rpeorts forum: Reports

Character mode report printing

hi everyone,
When I am running report in character mode, it is working fine in previewer. But as soon as I am giving the printing from there, it is giving Rbe ERROR dialog box and runform is getting hanged. How can I get report printed directly from previewer in character mode report generation.
On the other hand if i redirect o/p to a file by making destination type file, then I am able to take to print of file. If any have a solution, please reply ASAP.
Thanking every one
Ashish

Hi Ashish,
It is not clear from your question about the type of error message you are getting.
Please meake sure that the report is indeed a character mode report.
Please verify the following for that:
1. The mode in system parameters is defaulted to
'caracter'
2. In the property palette of the report, the "design in character units" should be marked as yes.
Please ensure that above points and try printing again.
thanks
The Oracle Reports Team

Problem to print character mode report in Landscape

Similar Messages

Maybe you are looking for