Problem to unassign deliveries from vehicle in Yard

Hi all,
We have a problem with 2 deliveries in a shipment.
We want to unassign this deliveries from the shipment, but when doing this an error appers:
'Documents are already assigned to Yard vehicles. Please unassign them'.
So i searched in the LYRDM txn for the deliveries in Yard but couldn't find them because the process is already complete.
Looks like the shipment is anymore in the vehicles tab.
Any idea of how we can unassign this deliveries?
Thanks!

Hi,
Please input the shipment number in LYRDM tcode and go to vehicles table check the shipment for which it is assigned.
once find shipment, do right click and unassign from vechicle.
Hope it will helps you...
Rgds,
Kris.

Similar Messages

  • Problem with date format from Oracle DB

    Hi,
    I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
    I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
    I have changing the field settings in DataSource  to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
    I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
    If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
    Thanks in advance.
    Regards
    Varada

    Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
    The issue again in detail
    I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
    The problem is,  I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
    I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
    I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
    Regards
    Varada

  • No unassigned deliveries were found

    Hi Gurus.
    We have created the new RLM plant 7199 copied from the old plant 7000 , based on this all RLM config has been copied. After create the RLM plant , we have created the new Shipping point 7199 from 7000 -Define, copy, delete, check shipping point from Logistic execution . After this we created the new customer Master C7199 and assigned this customer master number in the u201CDefine Shipping Data for Plantsu201D of Stock transport order for the plant 7199.
    After this we have created the Material master # 10000060384 for the plant 7100 with MRP type u201CPDu201D and MRP type u201CNDu201D for the plant 7199 and posted the PO for the plant 7199, and then created the GR without any issue.
    While creating the GR, it provided the below Cross-docking for Goods receipt 500086227 2010 details.
    Destination:C7199     Dest.Name : UK   Item      : 1  Details: Dlv.Item : 80080340 10 Material Description : Test
    Quantity : 10    BUn: EA    Original document: PO item 4500078232 10  Purchasing Document     4500078232 etc.
    In this screen we select the above line and select u2018SHIPMENTSu201D, we are getting the error message as u201CNo unassigned deliveries were foundu201D (Message no: OIO 152).
    FYI, we analyzed the program and found that delivery number 80080340 is missing in the table VTRDI. Looks like we missed some config to update this table.
    Could you please suggest me why this is occuring.     
    Thanks
    Sada

    I found the solution, I missed the config of Maintain Route Determination in Logistics Execution.

  • Problem during creating delivery from PO in intra-co stock transport

    Hi All,
    during the intra co stock transport process between 2 company codes after the PO is saved as the 1st step of the process,im trying to create a delivery wrt the PO in the transaction code VL10B.
    this is giving the following errors
    1.documet is incomplete:u cannot save the delivery
    2.serial number reqt.not satisfied (V50UC-SERIAL),error group:L1
    immediate help on this issues will be appreciable.
    thanx
    vishal degaonkar

    to add more information bout the problem.....
    we've assigned serial no's during delivery creation which is done manually.as the delivery creation process in VL10B is in the background it is not picking up the serial no's and hence the incompletion error.
    is there any other method to create deliveries from purchase orders???

  • Block deliveries from storage location

    Hi,
    I have two storage locations - 01 and 0Q.
    The production wanted 01 to be their storage location for finished products for sale. All deliveries must be issued from this storage location.
    Storage locatio 0Q is the Quarantine location for finished products that is not yet ready for sale, or with quality problems. Deliveries for sales should not be done from this storage location.
    My question is how to restrict, or disallow any goods issue for sales orders or deliveries from the Quarantine location? Is there a transaction in SPRO where I can do this configuration?
    Thank you in advance

    Hi,
    Option No. 1 --> Using User Exit
    Option No. 2 --> Using SPRO
    You can use incompleteness for inbound delivery, in incompleteness Put storage location as a filed. You can define the same using SPRO.
    Logistics Execution ---> Shipping -->Basic Shipping Functions > Incompletion Control for Deliveries>Define Incompleteness Procedures Select H delivery item and create your procedure.
    Assign table filed as LIPS -LGORT screen LAPD status 02 and Seq 1000 and attach this in Procedure to ELN in below path
    Assign Incompleteness Procedures -->Assign Incompletion Forms to the Delivery Item Types
    Now, if you are try to save the inbound delivery with Storage location system will not allow you to save the delivery.
    Bye,
    Muralidhara

  • Face time fades out and then tries to reconnect on new ipad retina display on WiFi.  Iphone 4s has no problem with face time from exact same location and same contact.  WiFi signal strong on both devices.  What gives?

    Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact.  What gives?

    rdallas001 wrote:
    Is the router to small?
    Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
    Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

  • Facing Problem with passing Values from One report to another

    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

    sorry for the late updation.
    My First Report, Summary level is a Pivot Table.
    I tried the same report with Table option, the value is passing correctly.
    Is there a way to get rid of this situation using Pivot table.
    Thanks for your help.
    below is the original request.
    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

  • I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

    i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

    hi TimoHahn,
    i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
    Root cause of ServletException.
    java.lang.NullPointerException
    at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
    at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
    at java.util.ResourceBundle.getString(ResourceBundle.java:334)
    at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  • Problem establishing SSL VPN from only 1 IP address

    Hi,
    I'm experiencing strange problem.
    I can't establish SSL VPN connection from 1 IP address, but I don't have problem establishing SSL VPN from any other IP address.
    Remote IP address: 10.0.0.1
    ASA's public IP address: 192.168.1.1
    Output of packet-tracer:
    1. with problematic source IP address:
    packet-tracer input wan tcp 10.0.0.1 50601 192.168.1.1 443 detailed
    Phase: 1
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   192.168.1.1   255.255.255.255 identity
    Phase: 2
    Type: ACCESS-LIST
    Subtype:
    Result: ALLOW
    Config:
    Implicit Rule
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff37573f00, priority=119, domain=permit, deny=false
            hits=861, user_data=0x0, cs_id=0x0, flags=0x0, protocol=6
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=0.0.0.0, mask=0.0.0.0, port=443, dscp=0x0
            input_ifc=wan, output_ifc=identity
    Phase: 3
    Type: CONN-SETTINGS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff38a10a50, priority=8, domain=conn-set, deny=false
            hits=4069, user_data=0x7fff38770910, cs_id=0x0, reverse, flags=0x0, protocol=6
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=192.168.1.1, mask=255.255.255.255, port=443, dscp=0x0
            input_ifc=wan, output_ifc=identity
    Phase: 4
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff395c7d70, priority=0, domain=inspect-ip-options, deny=true
            hits=4044934, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
            input_ifc=wan, output_ifc=any
    Phase: 5
    Type: VPN
    Subtype: ipsec-tunnel-flow
    Result: ALLOW
    Config:
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff37560700, priority=13, domain=ipsec-tunnel-flow, deny=true
            hits=2268518, user_data=0x0, cs_id=0x0, flags=0x0, protocol=0
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
            input_ifc=wan, output_ifc=any
    Phase: 6
    Type: TCP-MODULE
    Subtype: webvpn
    Result: ALLOW
    Config:
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff38a10cc0, priority=13, domain=soft-np-tcp-module, deny=false
            hits=4627, user_data=0x7fff38c14300, cs_id=0x0, reverse, flags=0x0, protocol=6
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=192.168.1.1, mask=255.255.255.255, port=443, dscp=0x0
            input_ifc=wan, output_ifc=identity
    Phase: 7
    Type: VPN
    Subtype: encrypt
    Result: DROP
    Config:
    Additional Information:
    Reverse Flow based lookup yields rule:
    out id=0x7fff375504a0, priority=69, domain=encrypt, deny=false
            hits=40747, user_data=0x0, cs_id=0x7fff3754fa40, reverse, flags=0x0, protocol=0
            src ip/id=192.168.1.1, mask=255.255.255.255, port=0
            dst ip/id=10.0.0.1, mask=255.255.255.255, port=0, dscp=0x0
            input_ifc=any, output_ifc=wan
    Result:
    input-interface: wan
    input-status: up
    input-line-status: up
    output-interface: NP Identity Ifc
    output-status: up
    output-line-status: up
    Action: drop
    Drop-reason: (acl-drop) Flow is denied by configured rule
    If I run packet-tracer with any other source IP address, let's say 10.0.0.2, everything is OK:
    packet-tracer input wan tcp 10.0.0.2 50601 192.168.1.1 443 de
    Phase: 1
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   192.168.1.1   255.255.255.255 identity
    Phase: 2
    Type: ACCESS-LIST
    Subtype:
    Result: ALLOW
    Config:
    Implicit Rule
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff37573f00, priority=119, domain=permit, deny=false
            hits=862, user_data=0x0, cs_id=0x0, flags=0x0, protocol=6
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=0.0.0.0, mask=0.0.0.0, port=443, dscp=0x0
            input_ifc=wan, output_ifc=identity
    Phase: 3
    Type: CONN-SETTINGS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff38a10a50, priority=8, domain=conn-set, deny=false
            hits=4090, user_data=0x7fff38770910, cs_id=0x0, reverse, flags=0x0, protocol=6
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=192.168.1.1, mask=255.255.255.255, port=443, dscp=0x0
            input_ifc=wan, output_ifc=identity
    Phase: 4
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff395c7d70, priority=0, domain=inspect-ip-options, deny=true
            hits=4047886, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
            input_ifc=wan, output_ifc=any
    Phase: 5
    Type: VPN
    Subtype: ipsec-tunnel-flow
    Result: ALLOW
    Config:
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff37560700, priority=13, domain=ipsec-tunnel-flow, deny=true
            hits=2270040, user_data=0x0, cs_id=0x0, flags=0x0, protocol=0
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
            input_ifc=wan, output_ifc=any
    Phase: 6
    Type: TCP-MODULE
    Subtype: webvpn
    Result: ALLOW
    Config:
    Additional Information:
    Forward Flow based lookup yields rule:
    in  id=0x7fff38a10cc0, priority=13, domain=soft-np-tcp-module, deny=false
            hits=4648, user_data=0x7fff38c14300, cs_id=0x0, reverse, flags=0x0, protocol=6
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=192.168.1.1, mask=255.255.255.255, port=443, dscp=0x0
            input_ifc=wan, output_ifc=identity
    Phase: 7
    Type: USER-STATISTICS
    Subtype: user-statistics
    Result: ALLOW
    Config:
    Additional Information:
    Reverse Flow based lookup yields rule:
    out id=0x7fff3a1cc320, priority=0, domain=user-statistics, deny=false
            hits=4902651, user_data=0x7fff3a0043c0, cs_id=0x0, reverse, flags=0x0, protocol=0
            src ip/id=0.0.0.0, mask=0.0.0.0, port=0
            dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
            input_ifc=any, output_ifc=wan
    Phase: 8
    Type: FLOW-CREATION
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    New flow created with id 4384689, packet dispatched to next module
    Module information for forward flow ...
    snp_fp_tracer_drop
    snp_fp_inspect_ip_options
    snp_fp_tcp_normalizer
    snp_fp_tcp_mod
    snp_fp_adjacency
    snp_fp_fragment
    snp_fp_drop
    Module information for reverse flow ...
    snp_fp_tracer_drop
    snp_fp_inspect_ip_options
    snp_fp_tcp_normalizer
    snp_fp_adjacency
    snp_fp_fragment
    snp_ifc_stat
    Result:
    input-interface: wan
    input-status: up
    input-line-status: up
    output-interface: NP Identity Ifc
    output-status: up
    output-line-status: up
    Action: allow
    I run packet capture on WAN interface - and I can only see incoming packets (SYN) with destination to tcp/443 but there isn't any outgoing packet (SYN/ACK).
    I even can't open web page from internet browser (url https://192.168.1.1) when source IP is 10.0.0.1, but I can open "SSL VPN Service" web page from any other source IP address.
    The only thing different with this IP address is that there's configured site-to-site (IPsec) vpn tunnel from same source to same destination IP address.
    Here is the configuration of the tunnel:
    group-policy GroupPolicy_10.0.0.1 internal
    group-policy GroupPolicy_10.0.0.1 attributes
    vpn-filter value VPN-ACL
    vpn-tunnel-protocol ikev1 ssl-client
    access-list VPN-ACL:
    access-list VPN-ACL extended permit ip object-group DM_INLINE_NETWORK_83 object-group DM_INLINE_NETWORK_84
    object-group network DM_INLINE_NETWORK_83
    network-object 10.11.217.0 255.255.255.0
    network-object 192.168.201.0 255.255.255.0
    object-group network DM_INLINE_NETWORK_84
    network-object 10.11.217.0 255.255.255.0
    network-object 192.168.201.0 255.255.255.0
    tunnel local & remote networks:
    access-list wan_cryptomap_5 extended permit ip 10.11.217.0 255.255.255.0 192.168.201.0 255.255.255.0
    crypto map wan_map 5 match address wan_cryptomap_5
    crypto map wan_map 5 set connection-type answer-only
    crypto map wan_map 5 set peer 10.0.0.1
    crypto map wan_map 5 set ikev1 transform-set ESP-3DES-SHA
    I've configured the same setup in my lab and I can't reproduce the error.
    The SW version running on ASA is asa861-12.
    I'm out of ideas.

    Just collected some other information:
    1. traceroute shows that traffic is not leaving ASA at all
    1   *  *  *
    2   *  *  *
    3   *  *  *
    I double checked that there is no "strange" entry for remote public IP in routing. Traffic with destination to remote IP should be sent via default gateway like all other traffic.
    2. debug crypto ipsec shows this information when I ping public IP address of the remote host (with VPN
    IPSEC(crypto_map_check)-3: Looking for crypto map matching 5-tuple: Prot=1, saddr=192.168.1.1, sport=30647, daddr=10.0.0.1, dport=30647
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 1: skipping because 5-tuple does not match ACL wan_cryptomap_1.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 2: skipping because 5-tuple does not match ACL wan_cryptomap_2.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 3: skipping because 5-tuple does not match ACL wan_cryptomap_3.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 4: skipping because 5-tuple does not match ACL wan_cryptomap_4.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 5: skipping dormant map.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 5: skipping dormant map.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 6: skipping because 5-tuple does not match ACL wan_cryptomap_6.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 7: skipping because 5-tuple does not match ACL wan_cryptomap_7.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 8: skipping because 5-tuple does not match ACL wan_cryptomap_8.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 9: skipping because 5-tuple does not match ACL wan_cryptomap_9.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 10: skipping because 5-tuple does not match ACL wan_cryptomap_10.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 11: skipping because 5-tuple does not match ACL wan_cryptomap_11.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 13: skipping because 5-tuple does not match ACL wan_cryptomap_13.
    IPSEC(crypto_map_check)-5: Checking crypto map wan_map 65535: skipping dynamic_link.
    IPSEC(crypto_map_check)-1: Error: No crypto map matched.
    It really seems that the whole problem is that ASA is trying to encrypt traffic sent from public IP address of one VPN endpoint and targeted to public IP address of another VPN endpoint and send it to remote VPN endpoint via IPcec tunel.
    There is indeed VPN tunnel established between both VPN endpoints, but there are just local and remote networks defined with private IP address space for this tunnel, VPN endpoint's public IP addresses are not included in the definition of this IPsec VPN tunnel.
    And there are at least two more IPsec VPN tunnels configured the same way and I can't reprodure this error on there two VPN tunnels.
    Any idea?

  • Problem inporting raw files from my Nikon D3200

    i have problems importing raw files from my Nikon D3200, i have tried some of the suggestions such as
    removing the RawCamera.bundle and RawCameraSupport.bundle from the System Library and downloading a newer version (OS X Yosemite: Supported digital camera RAW formats - Apple Support)
    The problem is  --  the latest RAW Compatibility Update version for Yosemite 6.02 appears to be the one I currently am using (in my System Folder).
    In that same article referenced above, my Nikon D800 is listed in an earlier version simply titled "Supported by Yosemite 10.10".
    This had some success but is not working after trying it several times, i am currently on version  OSX Yosemite 10.10.1 and the version of iphoto is 9.6
    any help would be greatly received as i only shoot in Raw

    Remove the RawCamera.bundle and RawCameraSupport.bundle again and update the system to 10.10.2 via the App Store.  That contains the bundles that will support that camera: OS X Yosemite: Supported digital camera RAW formats - Apple Support.  The 6.01 and 6.02 updates are not needed for that camera. Be sure to repair disk permissions after the update.
    As usual be sure you have a backup of your hard drive before applying any such update.

  • As soon as I open iTunes a  message pops up to say a problem has stopped it from working and I have to close it. Any solutions?

    As soon as I open iTunes a  message pops up to say a problem has stopped it from working and I have to close it. Any solutions?

    Start with the third box in  Troubleshooting issues with iTunes for Windows updates.
    If that doesn't work, use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
    tt2

  • Problem while selecting BELNR from BSEG

    Hi Experts,
    I have a report performance problem while fetching BELNR from BSEG table.
    I have to print latest BELNR from BSEG where BUZID = ‘M’ but at the time of execution of report, It is taking too much time (More that hour and sometimes it gets hanged).
    I have also gone through the comments provided by experts for previous problems asked in this forum e.g. BSEG is a cluster table that is why data retrieval takes long time etc.
    Can any one has any other idea or suggestion  or any other way to solve this problem
    Regards,
    Neeraj

    Hi,
    1) Try to create an index on BUZID field
    2) Don't use SELECT/ENDSELECT statement. Instead of that extract all the concerned entries from BSEG into an internal table :
    select belnr from bseg appending table itab where buzid = 'M'.
    then do this :
    sort itab by belnr.
    describe itab lines n.
    read table itab index n.
    Please reward if helpful.
    Regards,
    Nicolas.

  • Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.

    Hello Guys,
    I am creating resultsource from central admin. If I create it from central admin it works fine. But if I am creating result source from power shell scripts it shows me following error message.
    An exception of type 'Microsoft.Office.Server.Search.Query.InternalQueryErrorException' occurred in Microsoft.Office.Server.Search.dll but was not handled in user code
    Additional information: Search has encountered a problem that prevents results from being returned.  If the issue persists, please contact your administrator.
    Any suggestion ?
    Thanks in Advance.

    Hi,
    Please provide more specific information about the issue. What type of content source you tried creating via powershell?
    Make sure you are using the approproate permission and search service application.
    Here is the reference for creating content resource via script:
    http://technet.microsoft.com/en-us/library/ff607867(v=office.15).aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

    I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?  Any help will be appreciated.  Thank you.

    This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
    https://discussions.apple.com/docs/DOC-4141

  • Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view. Also, when I go to enter a new event in google calendar, I now have to click the cursor in the box to type the event (it used to let me just start typing).

    Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?

    I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

Maybe you are looking for

  • Link to OBIEE 11g Dashboard Page from a 10g Dashboard Page

    Hi all, Is it possible to place a Link object on a dashboard page (within OBIEE 10g) and have that navigate to an OBIEE 11g dashboard page? If so, how is that implemented? Our 11g and 10g environments are on different servers. For business reasons (a

  • Determing Gapless Playback Information.. CRASH

    Since I installed v 7, iTunes (and my computer) freezes as iTunes tries to "Determine Gapless Playback Information" by scanning all my tracks. It gets stuck on one (or several possibly), and there is nothing I can do except reboot my laptop. Can anyo

  • How to use 2 primary key in 1 table

    Hi, When i creating the table,in this the following are the columns Name,Street,City,Pin in this they give some rules the column Name & City as Primary Key. But when type the query it shows the error table contains one primary key, how i do this? Tel

  • How to connect to and communicate with an SQLite database in AIR/Flex

    Hey guys, I recently decided I would try programming a vocabulary-training program in AIR, so I could use it on Linux as well. I got stuck pretty soon. I am trying to connect to a local SQLite database and I obviously fail epically. Posting the sourc

  • Any BAPI for VL02N

    Hi, I’m creating a new output type in NACE(V7-Transport) and one of my process is to update the delivery(VL02N), its work using CALL TRANSACTION but I got abap dump, the errors is Runtime Errors POSTING_ILLEGAL_STATEMENT and the comments is Statement