Problem to update delivery block (sales order header level)

hi all,
after few tries, we got message "Field 'LIFSK' cannot be changed, VBAKKOM 0001279765 ready for input".
this message come when we try to update the delivery block with some value when the delivery block in the sales document is blank (no block).
please advise how to solve the problem. thanks.

Well, you said that only some orders are failing - try to find what's so different about them. Also check if there are any other messages in the RETURN table.
Sometimes these errors might be difficult to catch because the field might not be available for input only at the moment when your BAPI runs, but later, when you go to VA02, it is available. Here is an example. We were trying to update the reason for rejection field. It becomes available, for example, when the delivery line item has been confirmed, but for the lower amount. The program with BAPI was running at the background. Sometimes there was an error in the delivery, which was corrected by a user. So when later in the day we went to research this, we couldn't figure out what's wrong. You might want to check the Changes log on the order and on the delivery.
And, of course, there is always the debugger - set the whatchpoint for where this message occurs.

Similar Messages

  • Complete delivery indicator in the sales order header level

    my order quantity is 10 and having the complete delivery indicator in the header level
    Complete delivery indicator in the sales order header level
    when i am doing the partial delivery i got below error
    Delivery quantity is less than quantity of 10 PC assigned to batches
    this is warehouse linked.
    Please let us know how to do the partial delivery.
    when i click on the bacth icon to reduce the quantity it is greayed out.
    is there any posiblity to reduce the quantity in the transfer order
    Please do the needfull
    thanks
    Raju.

    Hi
    Usually this Complete delivery indicator flow from Customer master data. you need to change this data in Customer Master
    Sales Area Tab under Shipping view Remove the Complete delivery indicator, also in Partial delivery per item keep the field Blank ( Partial deliveries allowed )
    I hope this will solve your issue
    Award if useful to you

  • Creating multiple partner function for a sale order @ header level

    Hi All,
    I have a requirement where in i have to create more than one partner funtion for a sale order @ header level. But the system did not allow this sort of scenario and i got the error,
    Partner function ZZ can only occur  1 times in procedure TA (Sales Document Header)
    the function module that was giving this error was SD_PCHECK_PARVW_COUNT_OK
    here the function module checks if a partner function already exists if so it throws that error. This also updates the VBPA table where partner function is one of the key fields.
    Our issue is that we have to allow the system to enable posting 2 or more partner function for the same sale order. It was also verified that the unique key was unchecked during configuration.
    is there any other way of over coming this issue as we are updating the standard table. Is it possible??
    Thanks a lot in advance for your reply....

    I believe this is a configuration setting, based upon the details of your post.  Typically, a sales order can have multiple partner functions, but usually the partner type is not duplicated at a single level (header or one item).  For example, it would not be logical to have multiple ship-to partners at the header level...these would be unique at the item level, if required.
    Speak to your SD functional specialist about the configuration controls for partners, if you must have more than one partner with parvw = ZZ, for the entire order (header level).
    Edited by: DaveL on Aug 23, 2011 3:00 PM

  • How to add a new tab to sales order header level

    Hello Experts,
    I have to add a new tab 'Billing Plan' at sales order header level.
    As per my functional person, If I modify TVAK-FPART field with some value than tab will be come.
    I tried to modify TVAK-FPART field in debug mode and was able to see the tab, BUT when I again came back to
    VA03/VA03 transaction then that tab was not there.
    Pls help me to resolve this problem..
    Rocks!!

    Hello Rock,
    I have the similar requirement, to add a new tab at the sales order item level. there are already two customer tabs but i dont want to use them, instead i want to use a new tab to be created. i searched BADIs but the BADI BADI_SD_TAB_CUST_I is for SAP Internal use only.
    Kindly suggest whay way you used to create a new tab. thanks in advance.
    Reagrds
    Sachin

  • BADI for sales order header level data

    Is there any BADI which will give me the sales order header level data? I need net price of the sales order in header level. KOMK structure does not contains the net price value.

    My requirement is:
    I am writing a pricing routine for calculating ZSMR condition value in sales order header level. The formula for calculating is (NET PRICE / NET SALES COST) / NET PRICE.
    I can't use VBAK  because I have not saved the sales order yet. I need to use some structure.
    Which structure contains the net price of the sales order in header level. KOMK structure does not contains the net price value.
    Edited by: dossgs on May 21, 2010 4:08 PM

  • How to make Delivery block at Sales Order Header level for specific materia

    Hi,
    My client want to create a delivery block EDI order at the Order Header level for specific materials
    How can we achieve this.

    Dear Varada rajan
    Go to material master, select "Sales: sales org.1" view and assign "01" against the field "DChain-spec. status" and save.  By assigning, for a particular sales area, you can block that material.
    Now go to OVSU select 01 and assign "B" against the field "Block delivery".
    Now create a sale order and post the outcome.
    thanks
    G. Lakshmipathi

  • How to update TEXT in Sales order header

    Hello ,
    I have requirement in which I am creating SO via IDOC calling BAPI_SALESORDER_CREATEFROMDAT2.
    Question: Can any one help me in finding a solution to update the TEXT in sales order header which is confogured IN TEXT CONTROL in SD.
    I have tried various option using CREATE_TEXT but it is only updating STXH table , the text is not coming in the sales order.
    If someone knows about this , <removed by moderator>.
    Edited by: Thomas Zloch on Nov 15, 2010 4:20 PM - please do assign priorities > normal

    Sounds like a text determination config issue - have you assigned the text in VOTXN?  Have you run the text determination analysis from VA02 in the document?

  • WBS Element ( Billing element ) assignment  at sales order header level

    HI,
    There is provision of assign WBS Element at sales order header as well as item level , If Project WBS Element is assigned for each line item delivery  and stock updating is happening from the project, But WBSE will assign at sales order Header  system will not allowing to create project delivery( moment type 601Q), and stock updation ftom project.
    Please let me know how this will happen ,
    Regards,
    Gangi
    Edited by: Gangi Reddy Botchu on Jul 7, 2008 4:50 PM

    SPRO - SD - Billing - Billing Plan - the first 5 config nodes (Define Billing Plan types / Define Date descriptions / Assign Date categories / Maintain Date Proposals / Assign Billing Plan types to Sales Doc types) are applicable to you.
    this is pretty tranparent for a reference.
    What else is required?

  • Activate field at sales order header level

    Hi,
    I can see field AUFNR (Order) in sales order header table VBAK. But not able to found same filed in sales order through using t c.code VA01. Where I can see this at header level? How to activate this field if I want to see in sales order?
    Thanks,
    Mohan

    Hi Mohan
    First of all Welcome to SDN forum
    Go to transaction variants using t.code SHD0 and give t.code VA01 and then give the business object as BUS2032 then you will get the programs . select the program and in that and check the AUFNR order feild
    that is as you said that it can be seen in the VBAK table check in this VBAK table ( AUFNR - VBAK) . If that feild is suppressed then make it optional and then save it and then create the sales order and then check the AUFNR feild in VBAK table. It should come in optional mode
    Regards
    Srinath

  • Receiving Point- @ Sales Order Header Level

    Dear Experts,
    I have to maintain receiving point at sales order header leve shipping tab. When i am trying to choose options it's telling no possible entries. If i want to get here what i have to config. Please suggest me.
    Thanks in advance,
    VS

    HI ,
      Pls maintain the entries in the following path.
    Go to XD02 tcode and in General data -
    >unloading points----> click on receiving points there u can maintain  the receiving point and save.
    and then when creating sales order for that customer  the receiving point  will be automatically comes in dropdown.
    regards,
    ksihore.

  • VL02N Change Delivery blocked - Sales Order is currently being processed

    Hi Experts,
    We have a problem with only 2 deliveries. We try to reverse goods movement in VL09, and the error Text Text * ID * language  not found. Text Determination is ruled out because the rest of the deliveries can be reversed without this error.
    Here are some more findings:
    - When we tried to change the Delivery, error will show 'Sales Order XXX is currently being processed by user'. This is odd because it doesnt say the user name.
    - Sales Document Flow is correct, but when I checked VBFA (table for Document Flow), no entry for Sales Order as preceding document for the delivery, In fact, Sales Order cannot be found as preceding document.
    - When I checked LIPS, the Update Indicator for Delivery Document Flow is blank. Requirement Type and Planning Type also blank.
    - We were able to delete Sales Order even if Delivery is not yet complete. Document flow was then changed where the preceding document of the delivery is a billing document.
    It's getting weirder as it goes, any idea is really welcome. Thank you so much.

    Hi Sridhar,
    Thank you very much for your answer, that is certainly the case. Some tables werent updated with the preceding document.
    These tables/fields are:
    VBFA - Sales Ord missing as preceding document
    LIPS - VGTYP field (indicator of what type is the preceding document) is blank, as well as many other indicator fields. Actually, what were filled was just the preceding document number and item number in LIPS.
    Additional detail is that we can see the SO in the Document flow of the delivery, but under the delivery item's Preceding Documents tab, it will say that there's no preceding document.
    However, the delivery is already GI'd (hence we want to reverse it), and we cannot reverse because of this problem.I found an OSS note that will force update the VBFA table, but still doesnt work, until I added some codes that will also force update the value LIPS-VGTYP = 'C'. However, I dont want to do this because this is a force update...
    Any advice will be a great help. Thanks.
    Joyreen

  • To add Billing Plan at Sales Order Header Level

    Dear All,
    Our requirement is such that for a project, we need to define a billing plan at header level of sales order.
    As of now we are defining billing plan at sales order line item which are having accunt assignment to WBS elements.
    Pl. let me know whether we can add billing plan at SO header level and if it is possible then how to do it. Because right now there is no tab available for "Billing Plan" at SO header level.
    If we can add it then will it be valid for all item levels?
    Need your help.
    Regards
    Ratna Palit

    SPRO - SD - Billing - Billing Plan - the first 5 config nodes (Define Billing Plan types / Define Date descriptions / Assign Date categories / Maintain Date Proposals / Assign Billing Plan types to Sales Doc types) are applicable to you.
    this is pretty tranparent for a reference.
    What else is required?

  • Discounts at sales order header level

    Hi,
    Is it possible to create discounts at header level,
    if it is possible what are the setups & procedure to follow
    and if there is any doc pls share it to [email protected]
    Thanks in Advance
    Raghu

    Yes.
    When you define the modifier, set the level to header.
    See http://oracleebusinesssuite.wordpress.com/2007/09/12/how-to-setup-manual-modifier-for-special-charges/

  • Update delivery with sales orders

    Hello,

    Hi,
    Welcome to SCN.
    I recommend you to go through the Forum Rules and Regulation.
    Regards,
    Abhijit G. Borkar

  • How to update the sales order header & item data in TM system

    Hi Experts,
    Greetings!
    I need your help,I have a one requirement sales order data came from ECC these sales order data need to update in TM Sales order header table as well as item table also these fields are additional fields.
    Can anyone please guide me I am very new in TLM .
    Thanks in advance.
    Thanks&Regards,
    Siva.

    Hi Siva
      "/SCMTMS/TRQ~ROOT" is for sales order header and "/SCMTMS/TRQ~ITEM" is for details.
      I assume you need to
    enhance the structures for these nodes to hold your add. fields;
    and do the same for the input parameter of service TransportationRequestRequest_In (which is used to create OTR) from PI side;
    Pass the add. fields during service call (impelment in ERP system);
    Map the fields from service paremeter to node attribute (implement in TM system, BAdI   /SCMTMS/TRQ_SE_TPNRQ_REQ~CHANGE_MODIFICATION create modification table for the input parameter).
    I cannot find source code for all of that; hope it helps.
    Sensen

Maybe you are looking for