Problem to update SRM EHP1 to EHP2

Hello Gurus,
we are RUMP Up Partner for SRM and we are trying to upgrade. We are using Solution Manager 7 EHP1 SP26. I check allready the SLD with LVSM and the content seems to be good for concerned system.
If we try to upgrade with mopz we can't select EHP2 only EHP1 visible. What could be wrong?
Many thanks in advance
Markus

As the others have stated, more details please!
You can't update through iTunes?
Is there an error?
Do you have an internet connection?
Are you running the up to date version of iTunes?
Is your computer crashing before you can load iTunes?
Can you not download the update?
Does the download get stuck?
Does the phone say it's updated?
What version are you currently running and are you trying to update to?
So many questions and so little for us to go on....

Similar Messages

Backend PO number does not update SRM follow-on doc section

Hi Guys,
We are on SRM5.0 and ECC6.0 with Classic scenario.
We are developing a logic in BADI BBP_CREATE_BE_PO_NEW (method FILL_PO_INTERFACE1) to determine if a Goods Receipt is required for some business conditions. Below is the logic.
1.If GR is required then create a PO with External number range in backend. This is working fine.
2.If GR is not required then create a PO with internal number range in backend. PO_NUMBER field will be cleared in the BADI so that backend system creates a PO with internal number range. This is working fine.
But the problem in the point 2 above is, internal PO# is not reflecting in the follow-on doc section in SRM. I noticed that SRM allots a PO# in table BBP_PDBEI with backend external number range before it transfers the data to backend. We tried to delete the PO# in BBP_PDBEI-BE_OBJECT_ID in the same BADI so that backend system can updates this field BE_OBJECT_ID in SRM with internal number PO. We did not succeed in doing this.The SC status shows Approved but do not show the PO#.
Can any one tell me how to populate the backend internal number PO in the Follow-on doc? Is this the right way of doing or is there any better way? Did any one developed such logic?
Please share your thoughts and experience.
Thanks in advance..
Jagdish

I noticed that SAP takes the number sequence from number range PO and updates BBP_PDBEI field before sending the Purchase order to ECC. If the different number range is defined in IMG "Define num range per Backend system for Follow-on docs" then system takes that num range. Then BBP_GET_STATUS_2 checks the PO# and updates SRM if the PO# matches otherwise it wont update.
But in our case we defined num range 44 for POs with Goods receipt and would like to assign another number range 22 for POs with NO GR. We can assign different PO doc type (ZEC) for NO GR by using BADI BBP_CREATE_BE_PO_NEW. But how to assign num range 22 for ZEC dynamically in BADI. System is trying to take num range 44 by default.
Is there any way we can assign different number range in SRM BADI?
Thanks,
Jagadish

Updating SRM 7.0 purchase order from R/3 ECC 6.0

Hi,
we have a situation where we need to update srm po (account assignment ) after GR . we were able to update in R/3 .
Till now SRM version is 4.0 there was no problem and purchase order is only available in R/3 . Now SRM system getting updated to 7.0 and as in SRM 7.0 purchase order is saved in SRM system too . To avoid the inconsistency we have to update the po in SRM as well.
Is there any way to update in srm from r/3 ecc 6?
Thanks ,
Rhea.

Hi Masa,
We use some customization during good receipt so during GR we change the account assigment details of po .
We got a method to change the ECPO . so it is possible to change ECPO(copy of srm ) in ERP.
What I am looking at is after changing the srm po copy in ERP I want to update in SRM too. so that both has same values (account assignment) . Not sure at this point how can be done (May thru BAPI/ RFC).
so is it possible to change po details in SRM from R/3.
Rhea.

CS4 Master Collection - Problem Applying Updates

Hi
I'm running the CS4 Master Collection on Windows Vista Ultimate 32-bit, SP2.
Normally I have no problem applying updates to the various Adobe components when they become available, however for a while now I've been unable to instal an update that's reported as being available for Adobe Media Encoder 4.1.0.
If I run the "check for updates" manually I can download the update (reported as being 63.7MB) and when I attempt to instal it the installation process appears to run. It finishes after a while and the Adobe Updater reports "The Udating Process is Finished" in a single dialog box with a single button entitled "Quit" - which seems odd as "Quit" implies "finish earlier than planned", I'd have expected something more in line with "All done", something like "OK".
Anyway, when I run the check for updates again I'm told about the same update implying that it wasn't applied successfully.
I get this behaviour whether I run the update as an Administrator or not (all other updates for other products are applied without problem). I also get it regardless of whether or not I reboot the machine after trying to apply the update.
Does anyone have any suggestions on what could be causing the problem ? I couldn't find anything obvious or obviously relevant in any of the Windows event logs on the PC.
Thanks for any ideas
Steve

I am having the same problem. I found a forum that suggested this. Apparently it worked for some people, but not for me. Let me know if it does:
1. Start -> All Programs -> Accessories
2. Right-click on Command Prompt and select "Run as..."
3. Run as Administrator (even if you are logged in as Admin. You need to run in the Black Command Prompt, not the White one)
4. Run: regsvr32 JScript.DLL
5. Then run: regsvr32 vbscript.DLL
(dont forget the spaces, or it won't work)
6. Then try running the set up again
As i said, it worked for some on the forum, but not others (like me). Try it and see if works for you

Problem with updating the PC Updater software

Good evening (from Germany). I have a problem with updating my Nokia Software Updater. I can download the setup and I can execute this. But when the installation starts (0%) a error message appears. It's a problem with Windows Installer but I don't know how to solve the problem. Here is a picture with the exactly error message:
http://img-up.net/?up=Nokia_probES8HJXXg.jpg
I hope somebody knows the anser with this software...
Greetings
OS: Windows XP SP2
Phone: Nokia 3110 classic Firmware: V 5.50
Message Edited by dernamenlose on 24-Apr-2008 08:56 PM

Good morning (from Denmark).
I hve the same problem.
OS: WinXP SP2
Phone: N73.
Greetings.

Problem while updating the Support Package 17 on my SAP WAS SP9

Hi,
I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
ERROR 2006-10-13 10:23:22
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
Please help me in this regard.....
Thanks in advance...
Satya

Hello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
ERROR 2006-11-22 10:13:57
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).

Updating SRM contracts from R/3 to SRM....

Hi all,
I am working in SRM, my requirement is to update the SRM contracts from R/3 to SRM and if any changes happen in R/3 contracts (previously updated contracts to SRM) then it should replicate those changes in SRM contracts also.
I found the program BBP_CONTRACT_INITIAL_UPLOAD (This program can be used to upload contracts from ERP to SRM. A separate contract in SRM would be created for each successfully transferred ERP contract.)
My question is, so if any changes happen in R/3 contracts it should update SRM contracts also.
Please let me know the solution how to solve this?
Highly appreciated any kind of help..
Thanks
Rajesh.

Hi Rajesh,
I think that your scenario is very risky as there is no master system for contract : one time it is srm and after it can be r/3 !
Besides this comment, you can search the forum and find some threads for contract replication in both ways (but no activated in the same time...)
Kind regards,
Yann

In updating iPhoto 7.1.5 to 9.4.3. I have four different Libraries. Is there a problem in updating all four Libraries from 7.1.5?

In updating iPhoto 7.1.5 to 9.4.3 I have four different Libraries. Is there a problem in updating all four Libraries from 7.1.5?

No. Once you have upgraded iPhoto to 9.4.3 launch it with the Option key held down and select each library in order. iPhoto will convert the library to the new version.
As always, be sure you have a backup copy of each library before proceeding.
OT

Hello, I have this problem on updating applications on my iPhone 4s 5.1.1 i dont know if you can help me with. when ever i want to update an application on apple store i get a different user name then mine(slamdance@cracked.by) this user name is not mine

Hello,
I have this problem on updating applications on my iPhone 4s 5.1.1 (jail broken) i dont know if you can help me with.
when ever i want to update an application on apple store i get a different user name then mine([email protected]) this user name is not mine but its always there only on updating my app's.
thanking you in advance for your kind help.

Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have and forfeit any support from this forum.

Problem in update snow leopard 10.6. 2 to version 10.6.4 on Imac 27 "I7

Problem in update snow leopard 10.6. 2 to version 10.6.4 on Imac
27 "I7
When do the automatic update of version 10.6.2. to version
10.6.4 when it comes to "Apple" and the hourglass to "think" that moment appears on the screen too fast some risks.
Does anyone know how to solve this? I happen to other customers?

Hi slbruilima
The best way to bring the system up to date from 10.6.2 is to download and install the 10.6.4 Combo Update from the following link. > http://support.apple.com/kb/DL1048
Dennis

Problem in Update Statement

I got some problem in update statement.Can anybody discuss with me regarding my problem? Below is the occured problem.
//all the declaration like Connection, ResultSet are declared, setting the ODBC path and so on steps have been set up before this method. When compile it, no error, when I start to run my program, the program�s interface is shown, but the following error was appearred and data cannot be updated, can anybody tell me where is my mistake?
//ERROR:SQL Error in update statement:java.sql.SQLException [Microsoft][ODBC][ODBC Microsoft Access Driver] Syntax Error in UPDATE statement.
//emp_overview is the table name
// last_name, first_name, office_phone�.is the attributes of the table
//this method had declare in the interface class already
public String updateData (String idd, String ln, String fn, String op,
               String oe, String hp, String ps, String ss)
               throws java.rmi.RemoteException
     {//begin of this method
          String result ="";
          try
          Statement statement = connection.createStatement();
          String sql = "UPDATE emp_overview SET" +
          "last_name=' "+ln+
          " ', first_name=' "+fn+
          " ', office_phone=' "+op+
          " ', office_ext=' "+oe+
          " ', home_phone=' "+hp+
          " ', primary_skill=' "+ps+
          " ', secondary_skill=' "+ss+
          " ' WHERE id="+idd;
          statement.executeUpdate(sql);
          statement.close();
          catch (java.sql.SQLException e)
     System.out.println("SQL Error in update statement: "+e);
          //throw a RemoteException with the exception
          //embedded for the client to receive
     throw new java.rmi.RemoteException("Error in Updating exist row into DB", e);
          return result;
     }//end of this method

Hi Kevin,
According to the code you have posted, it looks like you are missing a space between "SET" and "last_name". I suggest you add the following line of code:
System.out.println(sql);
before the invocation of "executeUpdate()".
I also suggest you add the following line of code:
e.printStackTrace();in your "catch" block.
Hope this helps.
Good Luck,
Avi.

Problem in Update statement using Execute Immediate

Hi All,
I am facing problem in update statement.
I am creating dynamic sql and use "execute immediate" statement to execute a update statement.
But it is not updating any thing there in the table.
I have created a query like :
update_query='Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
Execute immediate update_query using V_Id;
commit;
But it is not updating the table.
I have a question , is execute immediate only does insert and delete?
Thanks
Ashok

SQL> select * from t;
                 TID P
                 101 N
SQL> declare
2     V_Id          number := 101;
3     Table_Name    varchar2(30) := 'T';
4     update_query varchar2(1000);
5 begin
6     update_query := 'Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
7     Execute immediate update_query using V_Id;
8     commit;
9 end;
10 /
PL/SQL procedure successfully completed.
SQL> select * from t;
                 TID P
                 101 Y

Problem in UPDATE statement In Multiple Record Block

Hi Friends,
I have problem in update Statement for updating the record in multiple record data Block.
I have two data Block the master block is single Record block and the 2nd data block is Multiple Record data Block.
I am inserting the fields like category,and post_no for partiular job in single data block
Now in second Multiple Record Data Block,i am inserting the multiple record for above fileds like no. of employees work in the position
There is no problem in INSERT Statement as it is inerting all record But whenever i want to update particular Record (in Multiple Block) of employee for that category and Post_no
then its updating all the record.
my code is Bellow,
IF v_count 0 THEN
LOOP
IF :SYSTEM.last_record 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES(g_post_no, g_roster_no, g_category, :POST_HISTORY_MULTIPLE.idcode, :POST_HISTORY_MULTIPLE.joining_post_dt,
:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
next_record;
ELSIF :SYSTEM.last_record = 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES (g_post_no,g_roster_no,g_category,:POST_HISTORY_MULTIPLE.idcode,
:POST_HISTORY_MULTIPLE.joining_post_dt,:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
EXIT;
END IF;
END LOOP;
SET_ALERT_PROPERTY('user_alert',ALERT_MESSAGE_TEXT, 'Record Updated successfuly' );
v_button_no := SHOW_ALERT('user_alert');
FORMS_DDL('COMMIT');
CLEAR_FORM(no_validate);
Please Guide me
Thanks in advence

As you do a loop over all the records in the block, of course every record is updated.
Also, what you do is not the way is intended to be used. In general, you base a block on a table,then there is no need at all for writing INSERT's or UPDATE's. Forms also know's then, which records to be updated and which not.

Problem In Update Statement In Multiple Record Data Block

Hi Friends,
I have problem in update Statement for updating the record in multiple record data Block.
I have two data Block the master block is single Record block and the 2nd data block is Multiple Record data Block.
I am inserting the fields like category,and post_no for partiular job in single data block
Now in second Multiple Record Data Block,i am inserting the multiple record for above fileds like no. of employees work in the position
There is no problem in INSERT Statement as it is inerting all record But whenever i want to update particular Record (in Multiple Block) of employee for that category and Post_no
then its updating all the record.
my code is Bellow,
IF v_count <> 0 THEN
LOOP
IF :SYSTEM.last_record <> 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES(g_post_no, g_roster_no, g_category, :POST_HISTORY_MULTIPLE.idcode, :POST_HISTORY_MULTIPLE.joining_post_dt,
:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
next_record;
ELSIF :SYSTEM.last_record = 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES (g_post_no,g_roster_no,g_category,:POST_HISTORY_MULTIPLE.idcode,
:POST_HISTORY_MULTIPLE.joining_post_dt,:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
EXIT;
END IF;
END LOOP;
SET_ALERT_PROPERTY('user_alert',ALERT_MESSAGE_TEXT, 'Record Updated successfuly' );
v_button_no := SHOW_ALERT('user_alert');
FORMS_DDL('COMMIT');
CLEAR_FORM(no_validate);
Please Guide me
Thanks in advence

UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;These update statements are without where clause, so it will update all records.
If it is specific to oracle forms then u may get better help at Forms section.

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Problem to update SRM EHP1 to EHP2

Similar Messages

Maybe you are looking for