Problem : touch screen compatibility with photoshop

Hello , I have Sony vaio touch screen and i have windows 8.1 and photoshop cc 14.0 installed in my system , the touch screen works in all PS interface but it doesn't respond in work area
Please help me to solve the problem !

This should tell you what you can and can't expect
Photoshop Help | Touch gestures

Similar Messages

  • How to enable touch screen stylus in photoshop: Dell Inspiron 13: windows 8?

    How to enable touch screen stylus in photoshop: Dell Inspiron 13: windows 8?

    You don't need to enable anything. For it to work you need a touch screen display and a pressure sensitive pen. Not a capacitive pen like those used on a iPad.
    A capacitive pen will work with the interface but not the brush tool.

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    Hi McGannahanSkjellyfetti,
    If you are experiencing difficulties with touchscreen response on your iPhone I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Touch Screen Drawing With Adobe Illustrator And Photoshop

    I've read that people have used the touch screen monitors of there home computers to draw in Illustrator.  Is this true?  If so what types of computers/monitors allow this?
    Also any other devices?  I've heard of the Surface Pro and am still researching it.

    I have the surface pro 3 I7 256GB device. It works great using the Adobe suite CC 2014. If no keyboard is connected then you can use the new touch interface in Illustrator. The pen that the surface has 256 pressure levels. Which is usually more than enough even in photoshop.
    The touch interface is much larger than the normal interface making easier to see on the hyper resolution screen (2160x1440)
    If you use the normal interface (which you will need to at times) I recommend a mouse so you can easily select buttons and menu items.
    If you purchase a tablet and for any reason the pen does not work correctly or other defect, it is recommend to send it back for replacement. There have been some issues reported on the surface forum. But I do not know if these were early units or what. Just so you are aware.
    The reason why you should use the surface over other tablet is because of the pressure sensitive pen. Photoshop for example can use the capacitive pens for accessing the interface but the brush tool requires a Wacom style pen.
    To my knowledge most if not all tools in illustrator can use a capacitive pen.
    Most features like zoom, move even the new straight rule/French curve work by using two fingers.
    The best part of having a touch screen is the ability to see what you are drawing while you draw it.

  • Photoshop touch not compatable with Galaxy Note 3?!

    The google play store says neither the phone version or tablet version is compatable with my Verizon Galaxy Note 3 (using android version 4.3).
    Can you please do something to fix this so I can download the app?

    Hi,
    is this still a problem for you?
    Thanks,
    Ignacio

  • What is the best touch screen computer for Photoshop

    I want a touchscreen computer/ tablet / detechable  with windoes 8 - and I want to run Photoshop and Illustrator.
    Any suggestions for a computer type. Under 800. I% or 3/ musthave hdmi/
    I ask as I see or read that people are having a lot of problems with downloading cloud or using a stylus with Photoshop.

    Start here to see what screens have Mac drivers.
    http://www.touch-base.com/

  • Has anyone used a touch screen monitor with scxi.I am having video lock ups while using LV and MAX

    I have a PCI-MIO-16XE-50 daq card (dev1) connected to a scxi-1000 chassis address 0 ID 1, with a scxi-1102,1163,1163,1162 slots 1,2,3,4 respectively.Cable is connected to daq card to 1102 card .Micro touch screen is used on com2. Have tried other serial ports 1,5. Touch screen works fine with windows until LabView and max is installed .Video lockups,Max failures occur.MAX seems to confict with touch screen.

    Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

  • Problem touch screen IdeaPad U330

    Hi!
    I know this problem might be posted before, but I couldn't find it.. So I'm trying it this way.
    Since a few weeks my Lenovo IdeaPad u330 has a problem with the touch screen. When I start my laptop, it works perfectly, but after a few minutes - or maybe an hour (it's quite random actually) the touch screen stops functioning, and I can't use it at all. I've used my laptop for over 10 months now, and the problem only started occuring a month ago, I think. 
    I think it might have something to do with the fact that my apps stopped working and that I had to 'restore the system'. 
    For the record, I'm still using Windows 8..
    Anyone's got a clue?
    Thanks in advance!

    We've just started having a problem with the touch screen. The screen becomes unresponsive and while the trackpad works the cursor flickers so you can only see it while it's moving. After a bit of playing with it I realised that it was registering some presses at the bottom of the screen- you could see the touch feedback circles. If I moved the screen a little, holding it at the top, more or fewer touches registered, so it looks as if the screen housing is putting pressure on the touch screen. If you hold the screen just right then no touches register and it goes back to normal.
    I'm just getting ready to return it. Probably try to get a refund because it looks like a design fault to me. Shame because it was a great laptop (despite windows 8)

  • Windows 8 upgrade problems (touch screen and audio)

    my　computer is HP touchsmart 600 1005xt and recently upgraded from windows 7 to windows 8 (64-bit)
    after up grading I noticed that the touch screen does not work and and the speakers also did not work

    HI,
    Here are a few tips that might help you to get your touch screen working:
    Activate Windows and install updates by pressing the Windows logo key + W. Type "Activate Windows" into the search field, and then click on the Activate Windows icon that appears in the upper left corner of the screen. In PC Settings, click on Activate Windows, wait for your computer to connect to Microsoft, and then follow the onscreen instructions. Restart the computer. Press the Windows logo key + X, and select Control Panel from the menu. In the upper right corner of Control Panel, select Large Icons from the View by drop down. Click Windows Update. Install touch and/or graphics driver updates. Restart the computer.
    Another thing to try: Go to the HP Support and Drivers site and click Drivers and Software.  In the search field, enter your product name or number, and then click Next. Select your operating system from the drop-down, and then click next. (If you don't know if your operating system is 32- or 64-bit, press the Windows logo + X key again and select System from the menu.) Follow the onscreen directions to install any appropriate drivers. Restart the computer.
    If the touch still doesn't work, try this: Press press the Windows logo + X key, and select Device Manager from the menu. In Device Manager, click the little triangle next to Display Adapters to expand the list. Right-click on the graphics card and select Disable. When asked if you want to disable the card, click yes. Restart the computer. You may have to tinker with your screen resolution.
    ~Lil.Liebe
    Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
    Click Accept as Solution on a reply that solves your issue to help others in search of answers.

  • Portage M750 Touch screen issues with windows 7

    I just purchased a used Toshiba portege M750.  Windows 7 is installed and I cannot get the  touch screen to work. The digitizer portion works great but the touch screen does not work.  Please advise.

    Portege M750-S7221
    Portégé M750 Series User’s Guide
    Downloads here
    Sevice Pack 2 has not yet been issued for Windows 7.
    The digitizer portion works great but the touch screen does not work.
    I don't see anything either in the spec or in the User's Guide about a touch screen.
    Here's the spec.
    Display - 12.1” diagonal widescreen LED backlight LCD display at 1280 x 800 native resolution (WXGA) with indoor/outdoor enhanced viewing supporting digital pen
    -Jerry

  • IPod touch screen frozen with computer cable and iTunes sign

    My iPod touch is frozen with a computer cable and iTunes disc sign on the screen. I have tried to restart it but it has not gone away. Any suggestions as to what it may be or how to fix it?

    Called Apple tech help - no freaking use!!! So I read a few posts and amongst others under help in itunes, I ran diagnostics and there was a link when the ipod was not recognized that discussed clearing temp files, etc. I did that, messed with MS Config to disable conflicting programs and some other stuff related to clearing temp files from installation of software. Eventually, I removed all apple software - itunes, helper, bonjour, mobile me etc and reloaded itunes. Did another reboot and this time it worked.
    Now, this is the second time I have updated software and each time it it really sucky. I thought Macs were supposed to be better than PC's (;-) well they sure are NOT. I can download and update anything else with no probs but an ipod.
    ipod touch is cool as it has internet access but stupid as an MP3 player as there is no radio and no decent equalizer. Sony kisses ipod butt regarding sound quality

  • Can I use a touch screen monitor with my macbook pro?

    I am doing a lot of photo organization and thought it would be easier if I had a touch screen monitor attached to my macbook pro.  Has anyone tried this and if so, what brand did you use.
    Thanks
    Bob

    All a touchscreen is going to do is replace your mouse or trackpad, you can't use two hands at once to gain any speed advantage organizing photo's.
    Also it would have to be a pretty big touch screen, place your two hands over a 17" screen and most of the screen is blocked.
    If you need something like that, talk to Microsoft, they have a "Big @ss table" that does that.
    Gives me a backache just looking at those people
    http://www.engadget.com/2007/06/20/microsoft-surface-one-day-your-computer-will- be-a-big-***-table/

  • Yosemite compatibility with photoshop element 11 ?

    Do you know if upgrading from marevick to yosemite is possible with photoshop element 11 ?

    It is - but many of the tools don't function properly when using a trackpad.  The click and drag action doesn't work for the brush, spot healing, etc.  It does work with a mouse.

  • New Mac os x 10.9.4 compatibility with photoshop 7

    I currently use photoshop 7 on an HP.  I just bought a Mac os x 10.9.4 and would like to still us photoshop 7 because that is what i know how to drive.  Will photoshop 7 work with os 10.9.4?

    No, photoshop 7 will not work on mac os x 10.9.4 mavericks.
    Photoshop 7 for mac os requires a PowerPC processor and your mac has an intel processor.
    Apple's transition to Intel processors - Wikipedia, the free encyclopedia
    Also. sounds like you have the windows version, which wouldn't work on the mac side anyway.
    Any photoshop version of cs3 and newer should work on your mac, but i would suggest not trying to find a used version, but instead go with photoshop cs6 (buy) or photoshop cc 2014 (subscribe)
    because there is a very good chance used versions or ones from ebay that say new but never used are pirated versions.

Maybe you are looking for