PROBLEM: Trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network

I'm trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network in my home.
I see the EXPRESS in ARPT UTILITY but when I click on "CONTINUE" or "MANUAL", the only option I'm given is to SWITCH networks, which I do not want to do.
I am using a MACBOOK PRO (MAC OS X 10.6.8)
Can someone offer me help with this?
Thanks!

Hi, I have a similiar setup. When you click onto the express, and it asks you to switch networks, it's not actually asking you to "change" networks. It's just actually switching to the xpress. When the xpress comes up, you'll input the name of your existing network, which you set up and named for the extreme. You'll have to change the extreme to "participate in a network", which is what you'll also do for the xpress. In the extreme under the WDS tab, you'll input the wds mode as "wds main". And then put a check mark in the "allow wireless clients". Where it says wds remotes, you'll input the the airport id's for the xpress's. In each of the xpress's, you'll set up as participating in a wds network. In the xpress's, under the wds tab, you'll set the wds mode to remote, and check
mark in the allow wireless clients. You'll have to input the airport id of the extreme in the wds main block. Under the internet icon on top, in internet conect tab for connect using: airport (wds), connect sharing: off (bridge mode).
Remember to insure that the express's show the same channel as the extreme, if you're using 802.11n (80211b/g compatible). Of course the security that you decide to use should also be the same.

Similar Messages

Trying to extend my Airport Extreme network using two Airport Express

Ok, so just an hour ago I had a network working fine that was set up like this:
Modem => Airport Extreme => Airport Express 1 / Airport Express 2
Stupidly I decided to rename one of them, to their specific room location, using Airport Utility 6.3.2, after it came back online it was listed on the utility bliinking yellow, when I hover over it with the mouse I can see the YELLOW DOT next to STATUS: Extend network, if i click on that it gives me the option to A) IGNORE B) EDIT and futher it goes on to say that it CAN NOT EXTEND THE NETWORK, asking me to check if the device is configure correctly/password is correct/or within range.
I have tried everything, reset, factory reset, setting it up again, and it just comes back blinking yellow.
Stupid again: I decided to unplug the other Airport Express, to see if that would help bringing the first one online again, now I have TWO yellow - non-able-to-extend-range Airport express units in the house.
Naturally I am quite frustrated, so any good advice will be very much appreciated, thanks!
The Airport Extreme is version 7.6.4 and serial number 6F8070MYYEW (If that helps anyone), both Airport Express is the latest version.

Hi Bob thanks!l
After about two hours of trying everything, I finally did something that fixed the issue, and since I have been around the block so many times I am actually not sure what it was; but it was a change in the setting on my Airport Extreme, and I think maybe I canged the router mode from DHCP (Is that default) to DHCP/NAT - and after that I was able to bring my Airport Express stations online again.... Weird, and far from the tunrkey solutions I have come to expect from Apple regarding internet connections.
Thanks for helping Bob, althogh I came up with a solution on my own, people trying to help is always very very much appreciated!!
Best
Eirik

Problems sharing External HD over Airport Extreme network

I just purchased a 1.5 TB Western Digital MyBook Essential. I tried plugging it into my Airport Extreme so I could access it wirelessly across the network but I can't seem to get it to work. I have followed all instructions I could find and still no luck.
I tried plugging it directly into my Win7 PC and it came up just fine and I was able to put an HD movie on it. Then I tried plugging it into my Mac and it came right up and I could play the movie without any problems (although I did notice I couldn't transfer any files off my mac onto the HD).
I then plugged it back into the Airport Extreme and went to disks and it showed right up with 1.4TB free. I then adjusted all the File Sharing Options as follows:
X - Enable File Sharing
Secure Shared Disks: With Airport Extreme Password
X - Remember my password in keychain
AirPort Disks Guest Access: Read and Write
X - Share disk over WAN
Workgroup: WORKGROUP
WINS Server: WORKGROUP
For some reason I still can't see it in finder to access the files on the MyBook Essential. I can't pull it up on my Win7 PC either.
Does anyone have any idea what I'm doing wrong? Thanks

Okay then, so there is no real way to have an external drive shared over the airport in such a way that both my mac and my pc can access it and read/write to it?
On the contrary. With an external drive, formatted with HFS+, the AirPort can share it to either AFP (Mac) or SMB (PC/Linux) clients.
I looked at FAT32 but it says there is a 4GB max file size, and I am mostly planning on using this drive to backup my Bluray collection which are fairly large files (7GB or more)
I would recommend HFS+ instead which has a max. volume size of 8 EiB. You can easily format the drive by (temporarily) attaching it to your Mac, and then, use Disk Utility to partition/format it as desired.

Trying to extend my airport extreme network with an airport express

I´m trying to extent my network with an airport express 802.11g.
I´ve been fallowing the guide:
http://support.apple.com/kb/HT4259
however, when I´m trying to configure the extended wifi base station ( point 8.) it won´t let me choose "extend a wireless network".
The only options I have is "create network", "join network" and "participate in a wds network".
I´ve been trying to find a solution all day.
Is there anyone out there who has hade the same problem or knows what it could be?
I´ve made sure that my base station connected to the internet through ethernet has checked the "allow this network to be extended"

however, when I´m trying to configure the extended wifi base station ( point 8.) it won´t let me choose "extend a wireless network"
Unfortunately, the older AirPort Express 802.11"g" model does not have a setting to "extend a wireless network", so it cannot be used the way that you want.
The article that you reference should be clear about this:
This article explains how to set up an 802.11"n" extended wireless network.
You need to use one of the newer AirPort Express 802.11"n" models to gain the ability to "extend a wireless network".

I'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

i'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

Until Bob Timmons gets back to you, first decide what you would like the Express to do. I understand you want it for AirPlay remote speakers, which you can certainly do.
I am assuming that you are not using an Apple AirPort router; if that's not the case stop here and let me know.
If your existing router is not an Apple AirPort Base Station, the Express:
can "join" an existing wireless network as a client, for the sole purpose of streaming music. If that's what you want to do, do not connect it to your router with an Ethernet cable.
can "extend" an existing wired network to serve as an additional wireless access point, which can also stream music. If that's what you want to do, connect its WAN port to an available LAN port on your router using an Ethernet cable.
Then, "hard reset" the Express according to the instructions below, and configure it. The prompts should be self-explanatory. If you run into trouble, describe which of the above two configurations you decided upon, and the point at which you're getting the "unexpected problem".
To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click. Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Cannot add Airport Express to Airport Extreme network

I keep getting the message "There was an error setting up this Apple wireless device for WDS. Quit Airport Utility and try again." So I've tried a few times with different reset/reboot/configuration changes all to end up with the same message at the end. This problem seems to almost exactly coincide with my update to 10.5.8. At least the Extreme is finally playing nice after I restored it to the factory settings and updated it to v.5.7. This is really frustrating since I pipe my music downstairs through this Express and feed the TiVo.

I'm trying to do the same thing - extend my wireless network from my Airport Extreme to 2 more Airport Expresses. I don't have a solution yet but hopefully between us both and the help of others we can get it.
First thing I realized - I needed to go to settings on Airport Extreme and in the 'Wireless' tab check 'Allow this network to be extended'.
Instead of WDS, I plugged in the new Express and in the 'Wireless' tab chose 'Extend my wireless network' and then chose my Airport Extreme network. Still not there, as for some reason Airport Utility no longer picks up the extremes even though I've got them plugged in right here. Perhaps a reboot after this post and we'll see what happens.
One question to all - does it matter if any/all of these wireless base stations have encryption set to WPA or WEP? Would it affect the Extreme's ability to connect to the Express'?

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How do I add an airport extreme to a cable modem with only one ethernet port, while keeping that port connected to my Mac?

I have a mac pro connected by ethernet to a cable modem via ethernet. There is only one ethernet port on the modem.
I want to keep the Mac connected via ethernet for speed. Is there a way that I can add an airport extreme to this set up - for my ipad and roku, and for guests to use - or do I need to buy a router to put between the modem and the mac?
If I need a router, what kind?
Thanks.

The modem connects to the WAN "O" port on an AirPort Extreme router.
The Mac Pro connects to one of the three LAN <-> ports on the AirPort Extreme router.
Or if you do not need the ability to connect a hard drive to the USB port on the router, you can save a bit by using an AirPort Express.
The modem connects to the WAN "O" port, the Mac Pro connects to the LAN <-> port
Either the AirPort Extreme router or AirPort Express router will allow up to 50 wireless device to connect.
There are many other wireless modems offered by other manufacturers as well.

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

Macbook Pro trying to connect to Airport Extreme I no longer own

I used to own an Airport Extreme which I used to run backups on my Macbook Pro, but got rid of it over a year ago. Then a few days ago, after a software update, I've started getting the following error message when I wake my macbook up from sleep "there was a problem connecting to the server airport extreme". I've checked the Airport Utility and it doesn't think there is an Airport Extreme connected. I can't find anything running in the background either, but then I'm not super techie, so its quite possible I'm not looking for the right things in the right places. Its starting to drive me a bit potty as I can't find anything similar in a google search either, so I'd be grateful if someone could help me work out what to do about it (preferably by giving me simple step by step instructions!). Thanks

Clean install the OS..
Sorry but if you have deleted all the plist files it would be gone.. but upgrade installs of Yosemite are so buggy.. just start over..
Use the existing TM backup to restore your files.. of course take great care doing this and if you need to make a new clean backup to a usb drive plugged directly to the computer.. a disk image can also add to the security of your files.
This is OS problem .. not the TC which is no longer even there.

Emac G4 problems with joining Airport Extreme network

I have an Airport Extreme network with two Airport Express base stations. The Airport Extreme is connected to the internet via ethernet/cable modem. The imac and the base stations work fine and I have no problem with my internet access on the imac, but I can't get internet access via the emac. It appears that the emac is connected to the network, but I get an error message ("Can't find server") when I try to access the internet. What have I done wrong?
imac G5 isight Mac OS X (10.4.4) Other computer: emac G4, operating system 10.3.9

Is the eMac connected wirelessly to the network?
It may be a DNS issue, see KB 106798, Mac OS: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or Similar Messages.

Airport Express to extend my Airport Extreme network

Puzzled at set up of my new Airport Express to extend my Airport Extreme network. Just trying to increase range. [Extreme works fine.]

We are going to need a bit more info in order to help.
Do you know if your AirPort Extreme is a newer dual band model? Check the Model Number on the bottom of the device if you are not sure.
Are you still using the OS X 10.6.8 operating system on your Mac as your profile indicates?
If no, what operating system are you now using?

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... What am I doing wrong?

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!

The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
Apple's instructions for WDS are here if you want to give it a try.
http://support.apple.com/kb/HT4262
It is possible that it might work. Keep us posted on your progress
Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points.

I am trying to connect an airport extreme to extend my wifi coverage and it doesn't work

I hope someone can help me.
I have an Apple Airport extreme gen 5. I have a BT router/modem that I connect to my broadband and its signal is OK but not great. I have multiple apple devices, a windows PC, and a Panasonic smart TV.
I also use Belkin poweline adaptors to attach the TV and apple TV to my network - its flaky.
I was trying to attach the airport extreme to a powline adaptor in the lounge to extend my wireless network - it was green for a while but then flashed orange and stopped working.
I have now reattached it directly to my router in the same room with an Ethernet cable and still get the orange light and the airport utility keeps asking to attach to the WAN port but then nothing works - I can still acccess the internet through my existing bt modem/router.
Any ideas please?

Click the Wireless tab just below the row of icons
Make sure that the setting for Wireless Mode is set to Create a wireless network
The Wireless Network name would be the same name as the BT network
The Wireless Security would be the same setting that the BT router is using....should be WPA2 Personal or WPA/WPA Personal
The Wireless Password would be the same password as the BT network
Verify Password
Click the Internet icon
Click the Internet Connection tab just below the icon
The setting for Connect Using should be Ethernet
The setting for Connection Sharing should be Off (Bridge Mode)
Click the Update button at lower right of the window and allow a full minute for the AirPort to restart
Power off both the BT modem/router and the AirPort
Wait a minute
Power up the BT device first for a few minutes
Then, power up the AirPort
Everything above is a "quick fix". If that does not work, we will have to start all over again from scratch.

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

PROBLEM: Trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network

Similar Messages

Maybe you are looking for