Problem Trying To Burn A Image To A Dual Layer DVD

My Problem is that i seem to be unable to burn an (DMG) image file to a Dual Layer Disk. I am using Disk Utility to burn the DVD. Everytime I try to burn the Disk i get the error message "The unit could not calibrate the laser power level for this medium.." but my computer is capable of burning Dual Layer Disk's. I Have Done This Before. I have been searching the web for any tips on how to fix the problem and i have even gone out and brought a cd 'laser lens cleaner' which many people clame fixed there problem but no advil. There is nothing wrong with the image file and i have managed to burn the file half way after cleaning the lens with the 'laser lens cleaner' i brought before, at which point i recived the error message "devise failed to respond properly, unable to recover or retry". I have not been able to gte any further sinse and am still gettin the first error message that "The unit could not calibrate the laser power level for this medium.." I have also tryed reinstalling the OS but no luck there either. Any Idea's?

Long shots ...
I know for a fact that the Perian QuickTime component causes major burning problems with Toast and Popcorn, remove it and they work perfectly, if you have it installed try removing it.
Failure to calibrate could be the media, what brand do you use ? try Verbatim ...
The CD lens and the DVD lens are two different things, a CD cleaner may not clean the DVD lens (so one burns fine and the other doesn't)

Similar Messages

Problems burning dual layer DVDs - help...please

I'm trying to burn a movie onto a dual layer (8.5gb) DVD but my 12" G4 Powerbook doesn't like it. It doesn't recognise the DVD and spits it back out after 30 seconds or so of strange noises, whirring etc. Burning onto regular 4.7gb DVDs seems to work OK, so am I doing something wrong? Can anyone help? FYI the media is DVD +R dual layer, made by Emtec (BASF).
Powerbook G4 12 Mac OS X (10.4.5)

Well I certainly am no expert on media, but I went to Apple's store to look at the PowerBook's spec's. On the 12" it says "Slot-load 8x SuperDrive (DVD±RW/CD-RW)" and then on the 17" it says "lot-load 8x SuperDrive (DVD+R DL/DVD±RW/CD-RW)." So it appears to me that the 12" does not support dual-layer discs. I know that it doesn't have a dual-layer burner, but perhaps it will not even let you do a dual disc one side at a time. Not sure, just guessing.

Media write error for dual layer DVD burn

I am having a problem burning a dmg to a dual layer DVD using the internal DVD writer. I have tried both Disk Utility and SimplyBurns.
Both program s go through the preparation for the file, and when it attempts to burn the disk I get a 'media write error'. I am using Memorex DVD +R DL disks. I have successfully burned both CDs and regular DVDs with the drive.
Does anyone have a suggestion on how I can fix this?
Thanks

I am using Memorex DVD +R DL disks.
Try Verbatim DVD+R DL discs.

Burning to a dual layer DVD

Hello,
I've just finished a project that I want to take to a facility to have copies made. I've been told in the past that using a DVD-R can create problems with the copies when used in certain DVD players. I'm running DVD SP2 and I can't seem to get the program to accept anything but a DVD-R. Is this a preferences issue or should I take the actual Video and Audio TS and burn it straight to the dual layer DVD? Would appreciate any help?
John
PowerMac G4 Mac OS X (10.4.6)

It could be a hardware and/or software problem.
As far as Dual-Layer disks go ... I don't think they were around in the DVDSP 2 days... that's too long ago for me to know (without searching, and searching is your friend in this case).
Also your G4 might only have a DVD-R drive and that might be why DVD SP is only accepting DVD-R's. You most likely don't even have a Dual-Layer DVD drive unless you installed one later on in your G4.
How large is the Video_TS folder? You'd only need to burn it to a Dual Layer if it's >4.7gigs and even if it is you need to create a Dual-Layer break point in DVDSP to tell the disk when to switch over to the other layer on the disk. Or if it's just over 4.7 gigs (approx.) you can try and re-compress it and see if you can fit it onto one disk (which may be better for compatability issues, something you seem to be concerned about) - you may end up having more problems w/ Dual-Layers and players compared to DVD-R's and players.
Good Luck

Has anyone had problems trying to burn playlists to CD's so tht they can play on standard CD players.

Has anyone had problems trying to burn playlists to CD's, so that they can play on regular CD players?

Yes, I have had problems playing burned IDVD's on stand alone dvd players and on pc's.
I have set the burn speed to 4x and as low as 2x to no avail.
I will try Verbatim discs and DVD-R to see if that resolves my problem.
I will also make sure of the minimum of 25 gb free space on hard disk.
Do you prefer a particular cleaning-dvd? I've never used one on my macmini.
Thanks for your responses, I'm anxious to try your suggestions and see what happens.

Sense Error Message when trying to burn Dual-Layer DVDs?

Hey all,
I am trying to burn a dual-layer DVD disc with the internal drive in my MacBook Pro.
I am getting the same error message from Toast each time I try to burn a disc. I get no response from Disk Utility (it just says "waiting for the disc drive") and Finder doesn't recognize the dual-layer disc when I try to burn in Finder.
I've heard that it may be a media issue, so I've tried with every single brand of DVDs that I can get my hands on. So far, I've tried Verbatim, Sony, and Memorex. I can't find any other brands of media, even at Best Buy?
I've heard that it may be a security update that might have caused this issue. System Profiler says that my machine can burn both DVD+R DL and DVD-R DL.
What is going on?!??

Welcome to Apple Support Communities
The two most common suggestions are (a) try other media, which you've done (and Verbatim normally work) and (b) run a DVD Lens Cleaner disc through it to see if some dirt or dust on the lens it causing the problem. If this doesn't fix it then it sounds like a hardware fault and best to let Apple check it out.

Problems burning dual layer DVD's

we have had lots of problems trying to burn dual layer dvd's. Single layer has been fine but is there some secret trick for getting dual layer to work? we have tried both the internal dvd burner and an external one and both are supposed to be dual layer capable.

about half of the ones we try get about half way through and then say media sense error (or similar wording) some of the others look like they have burned fine and then when it is writing the last little bit it just stops, this results in discs which are unreadable. The others look like they've burned fine and then don't play one of the items on the DVD once it is put in the machine.
Those that do play appear to stop about the level of the switch of layers.

Trying to make single layer disk image AFTER making dual layer image

Hi all
I wonder if you can help me.
I just made a dual-layer DVD image from a project and it created a 7GB file. Now I'd like to try a single-layer disk image at 4.7GB, something I did with an earlier version of this project, resulting in a watchable disk on a smaller TV.
Having made the 7GB image, Encore won't let me make the 4.7GB version but I don't understand why.
Martyn

Thanks John.
I don't know the answer to your AVI/MPEG2-DVD question. Sorry.
I simply imported my PPro sequences, built my menus and created the disk image for a dual-layer disk. Whatever source format that involves, that was the one I've used. How can I find out?
Is there an alternative way of building a disk that will allow me to choose all DVD/image/Blu-ray output options without starting again?

Burnning dual layer dvd Encore CS5.5 errors out.

Here is the greatest error I have ever seen.
I got to burn a dual layer dvd transcoded from AVCHD 1080i with fallowing settings.
Edited footage in PPro and send to Encore via Dynamic link, created dvd project using Mpeg2 with 9mbps, Dolby 192 for Audio.
File size to be burned on dvd is 5.67gb, aprox 1 hour 10 min transcoded with 9mbps, 720x40 wide screen, audio is 192kbps Dolby.
There are three menus one is main and tow sceen selection menus, noting fancy everything as default. menus linked as usual nothing fancy and and it is very basic.
All assets, that used for motion menus and main video is transcoded fine, but when it gets to put dvd together I get this error
Encore starts organizing videos for disk and after that it gets to this above and thats it. Press ok Build progress box gives fail message and option to Ok it. After pressing Ok button this box goes away to build panel.
I have tried to change an Automatic layer break to manual still get the same error, I have tried a custom layer break and still get the same error again, I have tried dvd, and an image, and folder for dvd, still the same error there to. I have redone project from scratch and still got the same result.
However previously I have burned many Dual layer dvds using the same method described, and same settings described, and never had this problem.
Nothing on the PS was changed except the updates installed regularly.
Anybody have any Idea what is this all about? Because I just burned 16 Blu Ray discs, and 16 Dual layer discs on one of the project, and next one a day latter this happens.

I'm having the same problem. not once did it, the encore was automatically break in the case of dual layer dvd. now he does not. I mark the box DUAL LAYER 8.54gb, do DVD disc or image or folder, or change the marking of the layer break from automatic tomanual, and it does not. in the end he always gives the message: duallayer requerid.
wanted to know how to do this manually break, because even in the manual or here on the website of adobe, has no suchinformation. does not show clearly how to manually break. please if someone can give a help, thank you.

Help with burning large project on dual layer DVD

Hi need help please.
I am busy with a SD 16x9 project 215 minutes long so I am trying to use dual layer DVD's. The project has a serious menu setup (well I think so), it starts with a intro and go's into the main menu with sub menu's and so on. my problems is the following:
if I burn a image all works well if I burn a disc from the image or using encore the menu once using a DVD player is very slow (the last half of the links on the time line) and some links get mixed up (if I press play dvd on the 3rd sub menu it somtimes starts in the correct place and somtimes it starts one link later).
is this caused by the break in the layer and what can I do to correct it or to get it better.
thanks
Darren

Are you using any motion menus? Have you exceeded the 1 gig limit for menus etc?
I assumed 16:9 and forgot to look before I started posting: it does not look like it, but be sure you don't have more than 18 buttons per menu (if it is 16:9).
With lots of short clips, break position should not be an issue. You can export to a folder and use imgburn which gives more control over layer breaks.
Even though complex, it all looks straight forward, and, even though I can't see the image detail, it looks okay. The most likely issue in such a project is that Encore got lost as you made changes/corrections. Sometimes they can be fixed. Other times, the solution is a do over. Newer versions for Encore appear more robust (fewer problems and more likely to fix problems), but no versions appear to be free of such issues.

Can't burn dual layer DVD's

Now that full retail copies of Leopard seem to be rarer than hens teeth I thought it about time I made a back up copy of mine to see my G5 imac through.
I've created a new disk image, popped in a dual layer DVD and on clicking burn get the message "The disc inserted does not have enough free space" despite it being only about 6.5 gb, and using a dual 2.4ghz iMac.
I've tried several types of DL disk, confirmed that system profiler gives DVD dl write status, and have no problem burning cds or single layer dvds.
Anyone come across this, and if so, did you cure it. Thanks

This is a genuine problem. I bet that if you tried to read a burned (that is, not manufactured) Dual Layer disc (either +R DL or -R DL) you would not be able to do that either; my iMac simply refuses to read the disc, which has to be force-ejected at startup.
I work in the CD/DVD manufacturing industry (and have for nearly 10 years) and we are getting complaints from customers that they cannot read our DL burned media, either +R DL or -R DL. However, only people with Macs have this problem. I have confirmed the DVDs play on every PC in our office, and also several set-top units, but none of our three Macs work. To dispel the whole "your media is junk" theory, I have tried several brands, including verbatim, ritek, and CMC magnetics (Hotan). I have also also tested the burned media in our $5,500 CD/DVD analyzer and it conforms to respective book standards and does not have any POFs and very low if any PIFs.
As a last resort, I hooked up an external IDE Pioneer 118 via a FireWire bridgeboard (a drive actually removed from a PC that played the DVDs just fine) to an office iMac. Unlike the internal Matsushita drive, this drive will read the Discs, but MacOS refuses to mount them!
This has to be some kind of problem with MacOS or the hardware. Either Apple has engineered it to not work with non-manufactured Dual Layer discs, or there is some big mistake here. Searching google and these forums reveals all sorts of similar issues.
Come on Apple respond to this post!!!!

Trouble burning dual layer dvd's with my superdirve

Hello, my question is regarding burning dual layer dvd's on my macbook pro. After finishing up a 5.6 GB movie in DVDSP4, i exported as an image (burned it as a .img) and then opened it up in disk utility for burning. Upon execution, i received an error message that said " the device failed to calibrate the laser power level for this media." I then tried burning the .img via DVDSP4 as well as the standard drag to disk on my desktop, all with the same luck. When trying the standard drag, drop and burn method (burn folder on my desktop), i received the error code 0X80020022.
After having no luck, i tested my super drive with standard CD's and single layer DVD's which it burned to just fine. I then tried switching media from memorex dvd dl +r's to sony dl + r's, but unfortunately it just refuses to burn to dual layer.
Any ideas as to what might be the problem?
Thanks.
Terry

Great Job

Disc image form a double layer DVD fails

I am trying to make a disc image from a double layer DVD in Disc Utility (os 10.5.1) so I can burn another copy (I burned the disc I am copying from, so it should not be encrypted or anything) and it has an i/o error part way through each time I try, I am guessing it is hitting the double layer splice point and not knowing what to do or something.
Any help would be much appreciated!
Thanks in advance!

Hi
There is a far fetched solution - but far from perfect.
(Best You can do is as Old Toad writes - Make it SL from start)
But anyhow
• in iDVD Save as a DiskImage
• Then use Roxio Toast™ and copy the DiskImage to a new SL-DVD - BUT also select Fit-on-DVD.
Now Toast will re-compress (takes sever amount of time) so that the material will fit (up to 10 hours on a SL-DVD)
BUT there are several Cons. to this
• Roxio Toast™ is not free - nor is it cheap
• Takes a long time to do
• Resulting DVD will look poor (Much worse than a SL-DVD from iDVD from start)
(A 10 hour SL-DVD - looks like crap)
So Yes it's technically possibly - But I can not motivate it at all.
Yours Bengt W

DVD RW DW-U10A won't read burned Dual Layer DVD

My friend created a dual layer dvd for me on his PC. I put it in my G5 and after about 15 seconds of the drive trying to read the dist it just gets spit out. It won't mount or anything.
Why is this happening? I've never had problems reading discs created on a PC. Is my drive incompatible with DVD DL+R media?

Hi,
I've been having a similar issues since not long ago. I think it coincides with Apple,s last security update (although I can't swear the 2 are connected).
I have a dual core 2GHz PowerMac G5 with a Pioneer DVD-R 110D Dual Layer.
I'm burning Dual Layers medias with Toast 7 (DATA, DVD-VIDEOS ETC). They all mount fine after and I can read the files etc. However if I insert the discs a few day slater, about 50% of them won't mount and are rejected without any error message!
Anyone else has this problem?

Can Adobe Premiere Elements 12 burn a dual layer dvd disk? If not, which of the components is at fault?

When I spoke to a person about upgrading from Premiere Elements 10 to 12, I specifically asked if the program could burn DUAL LAYER 8.5 dvds and I was told that it could. That is the ONLY reason that I upgraded. Since recording in full HD the files are larger. I video plays for local theaters. I have been trying to burn a disk that is 7.5GB (2 hours 15 minutes). I bought RIDATA -RDL 4x 8.5GB disks. Then had a dual layer burner installed in my computer. Premiere Element dialog "incompatible disk" The RITDATA says the problem is Adobe, the Geek Squad says the problem is Adobe.
SO ANSWER THIS QUESTION: Can Adobe Premiere Elements 12 burn a dual layer dvd disk? If not, which of the components is at fault? I am trying to burn 18 copies of this video (no copyright infringements) and don't tell me to to divide it into 3 disks.

drowning
Can Adobe Premiere Elements 12 burn a dual layer dvd disk?
Short answer: Yes.
What are you burning to DVD disc - DVD-VIDEO on DVD disc or AVCHD format on DVD?
Does your DVD CD burner support double layer single sided discs?
Premiere Elements is supposed to (been there and done that....)
1. burn to Folder (8.5) for Publish+Share/Disc/DVD and Publish+Share/Disc/AVCHD
(you take the VIDEO_TS for the former and BDMV Folder in the latter to a program like ImgBurn
for the actual burn to the DVD double layer single sided disc)
2. burn to disc 8.5 GB/240 minutes
Have you gone the burn to folder Folder (8.5 GB) route?
Have you tried another brand of disc in spite of by the disc manufacturer and the Geek Squad are telling you?
A double layer single sided disc is labelled 8.5 GB/240 minutes. In reality, that 8.5 GB is 7.95 GB. Where are you
coming up with 7.5 GB for your disc? Was that due to typing glitch?
Please review and consider. Any questions, please do not hesitate to ask.
ATR
Add On..Have you updated 12 to the 12.1 Update yet? If not, please do so using the opened project's Help Menu/Update.
This is not Adobe. Rather user to user.

Problem Trying To Burn A Image To A Dual Layer DVD

Similar Messages

Maybe you are looking for