Problem trying to synchronize iCal info with my cell again
After not syncing iCal with my Nokia 6822 for about six months or so (used a Palm for scheduling which I synced with Palm Desktop) I tried to do it again today, checking the 'calender' box under 'Nokia 6822'. When doing this an alert is popping up asking me to open iCal. After this is done I still cannot check the 'calender' box as the alert is popping up again and again and ... Any ideas to get things working again? Deleted the 6822 already and added it again, didn't help.
Sorry for the bad English -- I'm German, but don't be afraid. Thanks for any help.
Detlef
Hi, Erik. I don't watch movies on my Powerbook or download them from the iTunes Store, so I'm certainly no expert on the possible causes of your problem. But here are some thoughts for whatever they may be worth:
You have pretty minimal RAM installed to support any demanding use of the Powerbook in Tiger, so adding RAM is my first thought.
Because watching a movie is a pretty demanding use, you may want to make sure no other applications or processes are running on the computer while you're doing it. In addition to quitting all other applications, try turning off BlueTooth and Airport (if you have them) and disconnecting any USB peripheral devices, some of which may occasionally exchange packets of information with the Mac even when they're not in use. Post back and let us know whether these steps make any difference.
I presume you've downloaded the movie to your internal hard drive and are playing it from there rather than from any other drive - is that correct?
Similar Messages
-
I am trying to sync iCal with all my computers and devices via MobileMe. I cannot sync iCal on my Mac Pro nor Mackbook Pro. I believe accounts to be setup properly BUT on both computers there is NO choice to select iCal among the choices in "Sync Menu" on the MobileMe window in System Preferences. Help?
Greetings,
If you delete individual messages they will be deleted from other accounts.
If you setup the accounts as IMAP (which is the default for MobileMe accounts) you can remove the accounts and the other users will still have the email.
Alternatively if you don't want to see the account in the other user go to Mail > Preferences > Accounts > MobileMe account > Advanced > remove the check mark for "enable account". This leaves the account and just turns it off so you don't see it and it doesn't send / receive messages.
Finally, you should be backing up your data for safekeeping so even if you did delete the account and the messages magically vanished you could restore them: http://support.apple.com/kb/HT1553
Hope that helps. -
Warning: Problems occurred during synchronization in Charm with virtual sys
Hi Team
I have configured charm with virtual system --(Dev>V01>V02>) as client specific STMS , Where V01 is Quality and V02 is production system; When I do consistency check from solar_project_admin tcode for project created, it shows no errors ;
but when i try to activate the charma and click on "refresh" button , it throws following error
"Warning: Problems occurred during synchronization" ;I have checked the logs in SLG1 for object "/TMWFLOW/CMSCV" ; but
there are no errors except warnings for BC Sets , Can you pl guide what might have gone wrong ?
All the RFC's are working fine and there is no authorization issue in solution manager.
Thanks
Swatihi,
for the CTS activation you must do all the below,
1. SMSY --> landscape creation
2. RFC Creations
3. Client Specific TMS configuration
4. Prj --> CTS activation.
go through the below doc,
[https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf|https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf]
jansi -
My problem is to synchronize Lightroom 4 with Elements 11.
I have another computer with Lightroom 4 and Elements 10 and there is no problems to operate from Lightroom to Elements. I have tried almost everything and spent several hours to find a solution. My both computers are new HP Pavillion and have Windows 7. What shall I do?
You can try to use the link below & I hope that would be helful to you!!
http://www.photoshopelementsuser.com/html/integrate-lightroom-with-elements/
Mandhir -
Problem trying to watch iTunes movie with powerbook g4
My 867 g4 is doing the equivalent of a stutter when I try to watch the godfather (downloaded from iTunes) on it. The picture and sound keep momentarily stopping and starting again. I've got the original hard drive and 384 gb of ram.
Do I need to upgrade the computer?Hi, Erik. I don't watch movies on my Powerbook or download them from the iTunes Store, so I'm certainly no expert on the possible causes of your problem. But here are some thoughts for whatever they may be worth:
You have pretty minimal RAM installed to support any demanding use of the Powerbook in Tiger, so adding RAM is my first thought.
Because watching a movie is a pretty demanding use, you may want to make sure no other applications or processes are running on the computer while you're doing it. In addition to quitting all other applications, try turning off BlueTooth and Airport (if you have them) and disconnecting any USB peripheral devices, some of which may occasionally exchange packets of information with the Mac even when they're not in use. Post back and let us know whether these steps make any difference.
I presume you've downloaded the movie to your internal hard drive and are playing it from there rather than from any other drive - is that correct? -
Problem trying to run photoshop roundtrip with aperture/automator
i have been trying to install photoshop round-trip to use with aperture but it is not working.
first, i created a folder called automator in the main library and drag the "start photoshop roundtrip.action" file.
second, i copied the photoshop action pack to my photoshop cs2, inside my application folder
third, i restarted the computer (aperture loves quit and restart).
now, i am trying to run photoshop round-trip from my aperture menu from automator, but i dont see the option for photoshop round-trip.
what i am doing wrong?
thanks for your help.
ericCan you please provide the code for a sample procedure and the string you are passing it for me to try out?
-
Problems trying to save us .eps with the last version CS6
Since a couple of weeks always i try to save a file us .eps the app doesn´t work. The windows progress open but doesn´t progress...
Mylenium
I didn´t because it is with all files. Old files, new one. Just do some draw, any one and try to save us .eps and then fail.
Thanks -
Problems trying to render radioButtons & combine HTML table cells
Hello
Can anyone help please, I am trying to render radio buttons in one table column and text in other columns of the same row, and can't:
Here is some example html:
<tr bgcolor="#EDEDCC">
<td><input type="radio" name="downloadcode" value="223"></td>
<td>Ciara feat. Petey Pablo</td>
<td>Goodies</td>
</tr>
<tr bgcolor="#EDEDCC">
<td><input type="radio" name="downloadcode" value="445"></td>
<td>Blaa. Petey Pablo</td>
<td>Baddies</td>
</tr>
My efforts have resulted in bad HTML all over the place, e.g. I last tried:
<h:selectOneRadio layout="PAGE_DIRECTION" value="{order.downloadcode}">
<f:selectItem itemValue="SY77731"/><f:verbatim><br></f:verbatim>
<f:verbatim><td>Ciara feat. Petey Pablo</td></f:verbatim>
<f:verbatim><td>Goodies</td></f:verbatim>
<f:selectItem itemValue="SY77732"/><f:verbatim><br></f:verbatim>
<f:verbatim><td>Green Day</td></f:verbatim>
<f:verbatim><td>Boulevard of Broken Dreams</td></f:verbatim>
</h:selectOneRadio>
Many thanks...Hello
Can anyone help please, I am trying to render radio buttons in one table column and text in other columns of the same row, and can't:
Here is some example html:
<tr bgcolor="#EDEDCC">
<td><input type="radio" name="downloadcode" value="223"></td>
<td>Ciara feat. Petey Pablo</td>
<td>Goodies</td>
</tr>
<tr bgcolor="#EDEDCC">
<td><input type="radio" name="downloadcode" value="445"></td>
<td>Blaa. Petey Pablo</td>
<td>Baddies</td>
</tr>
My efforts have resulted in bad HTML all over the place, e.g. I last tried:
<h:selectOneRadio layout="PAGE_DIRECTION" value="{order.downloadcode}">
<f:selectItem itemValue="SY77731"/><f:verbatim><br></f:verbatim>
<f:verbatim><td>Ciara feat. Petey Pablo</td></f:verbatim>
<f:verbatim><td>Goodies</td></f:verbatim>
<f:selectItem itemValue="SY77732"/><f:verbatim><br></f:verbatim>
<f:verbatim><td>Green Day</td></f:verbatim>
<f:verbatim><td>Boulevard of Broken Dreams</td></f:verbatim>
</h:selectOneRadio>
Many thanks... -
Can I synchronize my iDevice with Aperture database on external volume?
Hi everyone,
I'm a photography enthusiast and I would always take photos.
Recently, my built-in harddisk was full and I transferred my photos to an USB-connected 2.5" external harddisk. That's not the problem - I can browse and edit the photo freely whenever I plug in my external harddisk.
But when I tried to synchronize my iPad with a database on the external volume, the problem comes. iTunes told that it cannot find the aperture database (in local drive) and I have no idea to match it with my current database.
Who can give me a solution? Thanks!
ALC
(Sorry for my poor English as I'm not an English native speaker)Hi Ap Lei Chau,
Your English is fine.
Though I do not have a iPad, I do have an iPhone. With my iPhone plugged in, open iTunes, under Devices click my phone, then Photos tab mine reads Aperture. Clicking that drop down I have a option to choose Folder. From there I can walk the path to an Aperture library.
It is my hope it appears the same in an iPad.
Cordially,
RicD -
Synchronize recursive tree with edit form
Hi,
I am trying to synchronize recursive tree with form, i have followed this post exactly Oracle ADF Developer: ADF - Synchronizing form with recursive tree
the first level of the tree works but the inner levels does not.
I am using JDEV 11.1.2.3Try sample 83 here -
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html#CodeCornerSamples -
Help with merged cells in table
I'm just learning how to use Dreamweaver 8 and tables. I am
trying to use a table with merged cells filled with graphics --
only one graphic per cell. I make my jpg the size of my cell, which
it seems to fill. Then, when I upload it to view in browser, it
looks as though the graphic doesn't take up the entire cell. At one
point, it was working both in Dreamweaver and the browser. Now, in
the browser view, it looks as though there is extra space above the
graphic and below it. Any suggestions on what is going on???It's not the use of tables with your graphics that is
necessarily the
problem, it's HOW you are using the tables with your
graphics. Can we see
the page you have built so we can examine the code?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"degazon" <[email protected]> wrote in
message
news:gasr2p$10m$[email protected]..
> Thanks! It's now evident that I shouldn't use tables
with the graphics. -
Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the same problem trying to istall iTunes.
Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free...... -
Since 8th May , after updating the iphone software to 5.1.1 I am not able to synchronize my iPhone with iTunes. Have tried removing previous back up datas , removed all photos and videos on iPhone , switched on and of and reset iPhone a million times , restarted my Mac a thousand times Please Help !!!
I have tried both options .. back up on this computer and also back up on icloud.
The backingup is fine .. there is no problem .. even synchronizing songs , applications , calender , mail accounts is fine .. only the contacs are not synchronizing. The itune goes on and on .. showing synchronizing contacs .. but nothing happens. When i uncheck contacts synchronisation .. everything works fine . I have also reorganized my address book . but it does not help -
i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fix this?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Can't connect to the internet in my home yet other devices can. I tried it in other wifi places and it connects without a problem. My home wifi is with ATT Uverse. I cheched the IP address on my laptop and its different than on my Ipod although it on the same network.
Move off WEP to WPA or, preferably, to WPA2 (as recommended by Apple). WEP has been deprecated by the WiFi Alliance since 2004 as insecure (it can be cracked in seconds by any hacker).
Note that each device on a network has a unique IP address but if your address starts with 169 then you did not get a valid IP address assigned to you by your router. If restarting the router did not cure the problem then you should check for a firmware update for your router.
Maybe you are looking for
-
Windows XP/Windows 7 2 user accounts on the computer. If each acct is logged into the computer and tries to have firefox running only one can connect to the internet at a time. Have Verizon FIOS for ISP and this just started to occur. Firefox version
-
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
Hello, everyone I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error: The Lync Server Front-End service terminated with service-specific error %%-100812489
-
HT5409 AVCHD audio does not play with the video clip
iPhoto does not import, or even see the clips, and when QuickTime played the clip off the card itself, no audio is present even though the inspector shows stereo.
-
Cascading Prompts in Crystal from a Universe
Hi There, How can I create a cascading prompt on the Universe to be used in crystal? I have created a Cascading prompt in the Universe and it work in Webi but for some reason you do not see the cascading LOV Versions BOE XI 3.1 SP2 FP2.4 Crystal Repo
-
Error message (-50) when updating podcast
When updating the Photoshop TV podcast I get an error message saying that there was a problem downloading it and I should check the URL to make sure that it is right. All other podcast updating is not affected, they update without issue. Is anyone el