Problem Uninstalling Flash CS4

I have downloaded the trial version of Flash CS4. When I try to uninstall it an error message appears saying that I have Adobe Bridge open, which I don't. I restarted my computer, tried Uninstalling it again and the same problem occured. What can I do to fix this and uninstall the program?
Thanks!

run the cs4 cleanup script, and reinstall flash cs4 again:
http://www.adobe.com/support/contact/cs4clean.html

Similar Messages

  • Problem with Flash CS4. Getting error when rendering the file

    Hi,
    One of my user is facing problem with Flash CS4.
    Whenever he tries to render the file, Flash CS4 throws the below error and only after restarting the application, it works fine for another couple of hrs.
    Please some one help me to resolve this issue.
    -Prabagaran L.

    Please post in the Flash forum. This forum is for suite specific issues.
    Bob

  • Can't uninstall flash cs4

    right after i installed flash CS4 i received a message about it not installing correctly or completely (i can't remember the exact error message - definitely had a big red X on it) but it said i could continue anyway and i did.
    now i want to remove it but i can't get it to UNinstall completely. when i run the uninstall thing from my windows vista control panel, it finishes with this
    message:
    "Done
    Some problems occurred while components were being removed. Please see below."
    and there is nothing written below, just an "Exit" button. i think it's only getting partially removed.
    thanks

    Can some please help me

  • Help me Please ,, I have a problem with Flash cs4

    hi ,,
    I wanna design a website by using Flash cs4 or flash cs3 ,, my computer's system is Viste ...
    in the last day I was download the flash program from Adobe website .. the terial one ...
    then when I complete the download ,, I go to install the program ...BUT !!!! always it show me a Alert window and it asked me to close (( Internet explorer )) to make the install contnue ,,, and the problem is that im not opening any programs eather internet explorer when Im install flash program
    help me please what can I do I need the program very important
    and thank you so much
    Salma

    I use task manager ,,, the result is = no Internet Explorer are RUNNING
    and the Flash cs4 program still does not install
    thank you but the problem still not solve

  • Problem loading flash cs4

    I dont know why flash cannot load, after installing it i
    launched the program and it stays on the splash screen stuck at
    "Loading Standard Profiles...." part.
    I have an earlier version of flash 8 and its been runing
    great from day one, i uninstalled it thinking there was conflicting
    issues but still nothing.
    My machine is xp with sp2 with 2gb of memory intel core duo
    any ideas?
    -marvin

    marvin,
    > I dont know why flash cannot load, after installing it i
    > launched the program and it stays on the splash screen
    > stuck at "Loading Standard Profiles...." part.
    Adobe hasn't made Flash CS4 available yet as a public beta
    or trial
    download -- at least, not that I see on the Flash product
    page -- so my
    first question is, did you install something you shouldn't
    have?
    David Stiller
    Adobe Community Expert
    Dev blog,
    http://www.quip.net/blog/
    "Luck is the residue of good design."

  • Weird AIR problem in Flash CS4.

    I have an AIR 1.5 Flash CS4 project that utilizes the new facebook api.  While the project works as expected by using "Test Movie" inside flash,  when I compile it it gives the error:
    VerifyError: Error #1014: Class flash.html::HTMLLoader could not be found.
    at com.facebook.graph::FacebookDesktop$/login()
    at SonyEricsson_fla::MainTimeline/frame17()
    I have read various posts about swc prioritization but even that doesn't  help, I have compiled the project by using the trial of CS5 but the  same problem persists. It is as if during compilation the  flash.html.HTMLLoader class is omitted. Could you suggest anything  please? Thank you.

    Ned Murphy-
    Thanks for your response. Yes I created a roll-over button of the photo in the graphic I made and then I was trying to create an ActionScript to play the movie (zoomout effect of the text on the graphic) when the mouse rolled over the photo (button). But I have been having a hard time implementing this action. I am trying to follow directions according to my book but making this ActionScript has been another problem I am having. I don't know how to view code in Flash. This graphic is intended for  a website I am creating in Dreamweaver so I'm just adding the button, zoomout effect and actionscript in Flash. Is there a way to undo the current actionscript applied and try again? Do you have any tips for creating this kind of ActionScript using the Action panel? Maybe once I get the ActionScript right the movie will play as it should in Test Movie??
    Thanks for your help.
    ashmic19

  • Video Problems with Flash CS4

    I'm having what I think is video problems since I switched to
    CS4. Frequent apparent redraws leave remnants on screen, panels
    move back and forth, etc.
    I have a Dell Precision 490 with 4gb ram and a nVidia Quadra
    fx 550 with 128 megs of ram. Open GL is enabled. I have loaded all
    the latest nVidia drivers.
    If this sounds like a video card problem, can anyone
    recommend a good, not too expensive card? I don't play any games,
    just use the machine for PS. ID and Flash mostly.
    Thanks in advance.
    Jon

    Just to be clear, when you initially did a Burn to Disc for the DVD, it tested and played perfectly, including the full Linked Timelines. It was ONLY with the Flash Export, that things went pear-shaped. Is that correct?
    Good luck,
    Hunt

  • Sound problems with Flash CS4

    Hello. I am currently preparing a presentation in CS4, and I've run into a really strange issue.
    Said presentation is roughly 3000+ frames, and easily over 100 layers deep, with a lot of fade-in/fade-out animations.
    It's also suposed to have sounds. Small clips that only last for a few seconds. However... after putting in one of said sounds (an .aif, also tried at .wav), for some reason, the clip plays briefly in an earlier frame when I publish it. It has, in fact, played at least twice in one moment, but the second sound went away when I deleted the layer and tried again... the first is still there.
    Looking at the library confirms that the sound is only being used once, in the frames I set up for it. It plays just fine and as it should in said frames. I have manually looked in the layers it seems to show up on, but none of them have sound. For the record, the sound is set up as Stream.
    So it's either a bug or my presentation is haunted. It's not a HUGE deal according to the other people I'm working with, but it's driving me nuts as I try to figure it out. Does anybody have any idea how to deal with this issue?
    Thanks for your time.

    1.  delete the sound from your library and retest to confirm everything works as expected (and that sound is not present).
    2.  convert that sound to an mp3, import to your library and add it once to the main timeline.  (if you add it to any other movieclip's timeline, you have a potential problem to discuss.)  test.

  • Problems with Adobe Flash CS4

    Hi to all readers
    the problem that I have is next:
    i have adove flash cs4 and work with it without any problem,
    until i publish my movie into swf file and try to run it....the
    movie is empty...like no have anything.
    what happens?...wht need do to fix that
    problem?...please..help me

    You know I'am having the same problem, Using flash CS4 after
    publishing I check it with Preview-flash and its good but when
    checking with Preview-HTML it doesn't work. ??? and it doesn't work
    after publishing and inserting into Dreamweaver or after uploading
    to server, I get no errors just no video? can any explain this
    situation I am in?
    Any help?... Much Appreciated. Thanks

  • Why is Flash CS4 so terrible in Windows 7 64 Bit?

    Hello,
    Well, I still have yet to see any posts or answers to posts that address the following problems with Flash CS4 on Windows 7 64 Bit:
    1. Flash takes half of forever to load.
    2. Flash is slow.
    3. Flash will not allow to Test Movies or Test Scenes. (This one is the most maddening and irritating.)
    4. Will not publish files due to an incorrect parameter. (Notice it doesn't say WHICH one.)
    Basic Specs:
    Windows 7 64 Bit OS
    8GB of RAM
    Intel i5 750
    I would really hate to have to revert to Windows XP just to use Flash CS4 reliably and I certainly am in no mood to purchase yet ANOTHER upgrade to CSx.
    Windows 7 has been out for around a year. Certainly someone at Adobe can illuminate why this program functions so poorly in Windows 7.
    Thank you.
    MGL

    Oh, and if by chance you, too, run Windows 64 Bit and Flash CS4, I would appreciate if you could share any thing you did to your system or installation to make it work better.
    Please don't just say, "Well, it works for me, blah blah blah."
    Thanks.

  • You can't open the application Adobe Flash CS4.app because it may be damaged or incomplete.

    Can someone help me with that one ? When I am trying to run Flash after install I get this error message:
    You can't open the application Adobe Flash CS4.app because it may be damaged or incomplete.
    Mac OS 10.6.5
      Model Name:    Mac Pro
      Model Identifier:    MacPro3,1
      Processor Name:    Quad-Core Intel Xeon
      Processor Speed:    2.8 GHz
      Number Of Processors:    2
      Total Number Of Cores:    8
      L2 Cache (per processor):    12 MB
      Memory:    4 GB
      Bus Speed:    1.6 GHz
    I tried to uninstall and reinstall, same error. I couldn't launch under Leopard (10.5.x) either.
    Thanks
    Eric

    Here’s some updates.
    I can not uninstall Flash (CS4) using "Adobe Creative Suite 4 Design Premium". It looks like Flash is not installed.
    If I try to install it using the disk, it looks like Flash is not installed at all. So I go thrue the installation process, and follow the instructions, until it’s complete.
    But if I go in my App folder, and look in the Adobe Flash CS4 folder the Flash.app icon has a circle with a bar in it. This is when I get the message.

  • (Urgent!) Uninstalling Flash Builder 4 Beta 2

    Hi,
    I'm having problems uninstalling Flash Builder 4 Beta 2.  There is no uninstall app in the Flash Builder folder for some reason.
    If I remove to the Trash and try installling and running the new Trial version, it gives me the error "An error has occurred. See the log file..". The contents of the log file are : "!SESSION !SESSION " ??
    Is there anyway to remove the previous version manually?
    Some details on my setup :
    OSX 10.5.8.
    I think Java 1.6..
    But this might a problem as when i try to launch OSX Java Preferences it gives me the error "Cannot launch Java application, java.lang.NullPointerException".
    I'm pretty stuck and can't get either to to work ( The old Beta 2 version gives me a Flex Licence error ). I just need to get the new trial insalled so I can upgrade completely.
    Any help would be much appreciated.
    Thanks
    Jamie

    Hello,
    Data Mangement expects unique values for id property.This issue may occur when you select 'Identity' property in Data Mangement wizard which is not unique in the Table.For eg:, you have selected 'name' field as identity property. And your MySQL database table has multiple rows with identical values for 'name' column.
    Can you verify if you have similar setup?
    Thanks,
    Radhakrishna

  • Flash CS4 Crashes

    Hi I was using CS3 suite and didnt have any problems
    (crashes) but since upgrading to CS4 I have been facing constant
    crashes specially with Flash CS4 with Vista SP1 32bit.
    I have re installed Vista 32 bit, thinking previous crashes
    could be installation related, I have the latest dell XPS pc with
    the latest drivers including ati graphics driver and all the vista
    updates installed including sp1. I have freshly installed CS4
    suite, it is still crashing... Crashes occur intermittently, like
    selecting unused library items or selecting motion preset etc... By
    the way I turned the kaspersky antivirus off thinking it could be
    related, but this didn't make a difference. Earlier Firereworks CS4
    crashed too.
    Has anyone experienced similar crashes, is Adobe aware of
    this?
    Thanks

    i've had problems with flash cs4 crashes with a new dell
    (less than 2 weeks old) using 64 vista home premium.
    i do most of my work with flash cs3 which has had no
    problems.

  • Adobe flash cs4 uninstall problems

    I am unable to uninstall the adobe flash cs4 trial. i go to add/remove and it just don't load, nothing pops up or anything ! please help me, I need to uninstall it! D:
    im on windows xp

    Still no solutions to this? I stopped getting the error
    message after installing all current software updates, but the tool
    still doesn't work on multiple shapes. Symbols work fine -- just
    not multiple shapes.

  • Flash cs4 mac - Error opening URL '/:Users:someting.swf' - Not a "loading external content" problem

    Hello.
    I am having a weird problem when trying to test a movie or publish preview -> flash on mac with Leopard os.
    The result is a blank movie with the usuall "movie not loaded" if u right click on it and the output returns the "Error opening URL 'the path of the swf here'.
    This has nothing to do with loading external files or something like that. It happens even in blank movies and it gives the same error if I try to open a swf from flash ide.
    I can publish the project or export the movie with no problem at all.
    I can preview the movie in html. I can run all the swf files in my hard disk, network, usb stick, dvd etc., but when I try to open any of these files from flash ide I got that stupid error.
    Its not something that stops me from working in flash ide but its slow to export movie any time I want to test it.
    Things that I've tried so far but nothing worked:
    Update the flash cs4 to the latest version
    Update the flash players
    Restored the release flash player as default player (I am using as default the debug player)
    Cleared the preferences
    Move the flash cs4 folder to another location in hd
    Saved the fla document first before testing the movie (in different places with or without spaces in document name or folder)
    Give read & write permissions for everyone for flash.app, players and for fla files when saved first before test movie
    Unistall and install the application 3-4 times.
    Test every as version just in case.
    Also I've checked the folders when testing movie and I can see that it creates an swf file, which I can run it outside flash ide (the one that the flash ide player cannot load) with no problem.
    The mac os has the default set up as it came. Nothing chnaged in permissions or security settings.
    Thanx in advance.

    In this particular example I am using this code to start the
    xml file load:
    // now load the XML file that contains the content strings
    var sXMLFile:String = "xml/home.xml";
    var xmlContent:XML = new XML();
    xmlContent.ignoreWhite = true;
    xmlContent.onLoad = onXMLLoadComplete;
    xmlContent.load( sXMLFile );
    But I don’t think the code is the problem here . This
    happens on every file I load when I am using a relative path to the
    content, regardless of how I load the content (XML object,
    loadMovie, MovieClipLoader, etc…) and the same code executes
    perfectly on every other machine in the office(Mac and PC).
    I’m more concerned with the semi-colons and .swf filename
    that Flash is putting into my relative path on the error message.
    Is that normal?

Maybe you are looking for