Problem unlocking CUDA in CS6 , but works fine in CS5

I installed CS6 which was fast and painless into my programs directry G( aslo where CS5 is installed):, add my card (GTX465)  and linked the PPRO EXE in the nvida settings and made it compatable. Then launch CS6 , which was much faster than CS5 loading up. Settup a new Project and went to the general progect settings, to set the ME Hardware play back settings, I could not change it from software to hardware. I have tried to do this and redo the settings still does not work.
I uninstalled CS6  and reinstalled cs6 as a default C: I also down loaded the patching program from www.studio1productions which unlocks all the geforce cuda card ,everything seems to work , till i launch CS6 , I am still not able to set CS6 to Hardware Render Play back , CS5 still works fine and i am able to set ME in CS5 but not CS6.
What am I missing or diong wrong?
Please help .......Harm ,Bill............

I am having the same problem just downloaded the latest nvidia driver but After does not see the cuda
Fast Draft:
Available
Texture Memory:
400.00 MB
Ray-tracing:
CPU
(GPU not available - incompatible device or display driver)
OpenGL
Vendor:
NVIDIA Corporation
Device:
GeForce GTX 560 Ti/PCIe/SSE2
Version:
3.0.0
Total Memory:
1.20 GB
Shader Model:
4.0 or later
CUDA
Driver Version:
Devices:
Current Usable Memory:
Maximum Usable Memory:

Similar Messages

  • "Incompatible GPU or no drivers found" issue with AE CS6 - But worked with AE CS5.5

    Hi guys, as the title suggests, I am receiving this issue in the Display section of the Preferences. I have After Effects CS5.5 still installed and I can opt to render using Open GL, whether its in my live document or to a file, but it just won't work in AE CS6. My graphic drivers have been updated and I still receive this error. These are my specs:
    Intel Core i7 CPU 930 @ 2.80GHz
    12GB Ram
    Windows 7 64-Bit
    Hundreds of gigs of free HDD space
    MSI R5850 Twin Frozr II 1GB GDDR5 4000MHz
    Please help, thank you.

    http://www.adobe.com/products/aftereffects/tech-specs.html
    Everything else is neither here nor there, as they say. Most other cards should work for "normal" OpenGL features, but that raytracing stuff really requires one of the cards listed there. As to why it doesn't work in your case, is an open question just as is why Adobe effed up CS6 so much. You could always try other drivers. Perhaps an older one in fact may work. Also play with settings like screen resolution and not using dual screens. Perhaps some combination will work.
    Mylenium

  • Hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    Have you changed the system voice to an English one in system preferences?

  • TS2972 First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first

    First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first night.

    The speed may have been ok at that time and is too inconsistent/too slow overall. interference may have proven to be more of an issue since as well. If using public DNS that will provide Intermittant results
    I'm sure using a hotspot would be fine but it depends on your viewing habits. An HD movie is around 4-5GB. It would also be subject to speed. requirements so best to test to see how it compares.
    You would have to check with your Carrier if hotspot it's enabled then just to into your settings and toggle it ON

  • I bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message. so when i tried to restore the iphone setting it is giving me now "ICCID: unknown" message please help. any ideas?

    i bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message.
    so i tried then to restore the iphone using itunes but it got worse it is giving me now "ICCID: unknown" message please help. any ideas?

    Please define "factory unlocked". The term is basically meaningless. iPhones are sold either carrier locked or unlocked. Some carriers will unlock them after a period of time upon meeting certain requirements and paying a fee.
    There are lots of places that will "factory unlock" an iPhone. This basically translates to "hack". This can cause permanent damage to the phone. Best case scenario is these phones will re-lock to the original carrier on an update or restore. Worst case it they become expensive bricks.
    ICCID unknown indicates a critical failure. There is no way to resolve this other than taking it in to Apple and getting the phone replaced. It's very possible that the phone was hacked and attempting to update has now killed it.
    Where, EXACTLY, did you get this phone?

  • HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

    touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

    Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

    Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

  • Superdrive no longer recognizes CD, but works fine with DVD

    my Superdrive seems to have a problem recognizing any type of CD media, but works fine with DVD media.
    I reinstalled Leopard and still the same problem. I also zapped the NVRAM (this is an Intel 2.0 Ghz Mac Mini w/ 2 GB Ram.
    Is there anything else I can do or do I just need to replace the drive?

    Typically when this sort of symptom appears, it relates to a hardware failure, either due to a faulty lens, or dirt. You might try a lens cleaner to ensure it is not the latter.
    Since this is a 2.0GHz mini, it ought to be still under warranty - if that is the case it would be wise to have Apple, or an approved service provider, check it and undertake any necessary repairs.

  • People picker is not working for ie11 but working fine for other lower version

    i am using sharepoint 2010 and windows authentication
    recently i have updated my ie to ie11 and problem goes here.
    when i try to select from people picker, there are an unexpected error happened 
    however when i use other ie version, people picker work fine, what goes wrong?
    i have already added my system as trusted site
    if there any others thing i miss out?

    Hi,
    According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
    IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
    first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
    add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
    add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
    You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Newest version of flash player not playing in newest version of google chrome but works fine in IE

    newest version of flash player not playing in newest version of google chrome but works fine in IE

    jennifer.jones214 wrote:
    In your  opinion, should I uninstall Firefox if I am installing Waterfox?
    Waterfox can coexist peacefully with Waterfox.  I have both installed, but never use Firefox any more.
    Not only can Waterfox run in 64-bit address space, it also is better optimized during compile time than Firefox.  (For obvious reasons; Firefox is compatible with many old systems, Waterfox only needs to be compatible with new 64-bit systems.)
    P.S. regarding Chris' advice above; Firefox and Waterfox use the same profile, so if that is actually the problem, then it will occur in both browsers.

  • HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

    Hi,
    Any one have this issue?
    HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
    This issue was found in my replacement motherboard. the original mother do not have this issue.
    The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
    Appreciate any one can provide clue for resolving the problem.
    I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50) 

    @wheng 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) env

    Hello,
    BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) environment
    Step 1: Build a asynchronous BPEL process which has no extra node. Make and deploy it in 'local windows desktop SOA' server
    The BPEL process has three nodes:
    a. client - on the left side of the swim lane
    b. receiveInput - first node in swim lane (client calls 'receiveInput')
    c. callbackClient - second and last node in the swim lane ('callbackClient' calls client)
    Step 2: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
    Step 3: Now, I can see the successfully completed BPEL instance in the BPEL console.
    Now,
    Step 4: Deploy the same BPEL process (dummy asynchronous) in the SOA server (hosted in unix box)
    Step 5: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
    Step 6: I find that the BPEL instance appears to have ended in error (on the second node i.e. callbackClient )
    With the following error message
    +<invalidVariables xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>9710</code>+
    +</part><part name="summary"><summary>Invalid xml document.+
    According to the xml schemas, the xml document is invalid. The reason is: Error::cvc-complex-type.2.4.b: The content of element 'DummyBPELProcessProcessResponse' is not complete. One of '{"http://xmlns.oracle.com/DummyBPELProcess":result}' is expected.
    Please make sure that the xml document is valid against your schemas.
    +</summary>+
    +</part></invalidVariables>+
    Has anyone faced similar issue as above ?
    i.e. process works find in windows environment (local SOA), but fails in SOA server in UNIX environment
    Appreciate your help in understanding this issue.
    Thanks,
    Santhosh

    Hello,
    The fix to this issue appears to have been as follows:
    +<schema attributeFormDefault="unqualified"+
    +     elementFormDefault="qualified"+
    +     targetNamespace="http://xmlns.oracle.com/DummyBPELProcess"+
    +     xmlns="http://www.w3.org/2001/XMLSchema">+
    +     <element name="DummyBPELProcessProcessRequest">+
    +          <complexType>+
    +               <sequence>+
    +                    <element name="input" type="string"/>+
    +               </sequence>+
    +          </complexType>+
    +     </element>+
    +     <element name="DummyBPELProcessProcessResponse">+
    +          <complexType>+
    +               <sequence>+
    +                    <element name="*:result*" type="string"/>+
    +               </sequence>+
    +          </complexType>+
    +     </element>+
    +</schema>+
    In DummyBPELProcess.xsd,
    modifiying "result" to ":result" appears to have resolved the issue in SOA under unix environment.
    If anyone can explain why "result" works in SOA under windows and ":result" works in SOA under unix environment, I would really appreciate your help.
    Thanks,
    Santhosh

  • I just installed CC Lr 5.5 and it will not open on my laptop but works fine on my desktop.

    I just installed CC Lr 5.5 and it will not open on my laptop, but works fine on my desktop.

    Try this:
    https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

  • I have a Mac running 10.9.2. My wireless mouse with not scroll in mail but works fine in other applications? Any suggestions?

    I have a Mac running 10.9.2. My apple wireless mouse will not scroll in Mail but works fine in other applications.
    Any suggestions?

    First, see this discussion. If the solution suggested there doesn't work for you, continue.
    If you've installed a Mail plugin called "Mail Unread Menu" and you know how to remove it, please do that, then quit and relaunch Mail. Test. Otherwise, see below.
    Back up all data.
    1. Triple-click anywhere in the line below on this page to select it:  
    ~/Library/Mail/Bundles
    Right-click or control-click the highlighted line and select 
    Services ▹ Open
    from the contextual menu.* A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
    2. Repeat with this line:
    /Library/Mail/Bundles
    This time you may be prompted for your login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • After updating to iOS 6.0.1 "Yahoo! Server Unavailable" but works fine on iPhone.  Help please!

    after updating to iOS 6.0.1 "Yahoo! Server Unavailable" but works fine on iPhone.  Help please!

    GIve it time. Yahoo has been have persistently random issues in past weeks. If you don't want to wait, you can try deleting and readding your account info.
    The issue is on yahoo's end and all their updates/upgrades.

Maybe you are looking for