Problem unmounting filesystems when rebooting/halting after upgrade

I just installed mkinitcpio 0.6.8-2 and util-linux 2.19-3 from testing repo and when i reboot/halt my system either with my custom kernel26-ck or kernel26 from core i get an error when unmounting filesystems saying:
"/dev/sda3 busy remounting read-only"
/dev/sda3 is my /home. After several reboots i noticed that 2 weird files(strange unreadable names) appeared in my home, so afraiding that something is wrong with the filesystem i rolled back the packages (mkinitcpio, util-linux-ng and my old kernel26-ck). Now everything is fine again with both kernels,
I'm writing my experience here because i do not know which of mkinitcpio and util-linux may be responsible for that problem. If anyone has an idea it would be nice to inform me so that i open a bug report.

I opened a bug report but it was closed because of being duplicate to that:
https://bugs.archlinux.org/task/23014?s … name=&type
so it seems that the developers team is already informed about the problem.
Last edited by mechmg93 (2011-02-24 11:13:19)

Similar Messages

Problems unmounting/ejecting a disk image after upgrade to 10.4.9

Since I upgraded to 10.4.9 I have the following problem:
After viewing a slideshow of pictures located in a disk image I cannot unmount/eject this image. I receive an error message that the image cannot be deactivated/ejected as some file is still in use.
Using the activity monitor I checked which files are in use by the Finder and found out that the last picture shown by slideshow is still referenced.
To me it seems as if the upgrade from 10.4.8 to 10.4.9 either changed the behaviour of slideshow (which does not close all files when terminated) or the eject image function (which does not force all open files in the image being closed).
The only bypasses I found so far are
- using "umount -f" on Unix level (think I have to be an admin for that)
or
- logging off and on again / restarting the computer
Has anybody got other ideas how to force the unmount without using native UNIX commands in a terminal window?
Can someone tell me how I can report this bug to apple? On Apple's support pages I could not find any information on that.
Thanks in advance for any helpful hints.
iMac 20" intel Mac OS X (10.4.9)

The "Dock" contextual menu item to "Relaunch" the "Finder" is the equivalent of a "Force Quit", which is quite different from a regular "Quit".
Unless it is being unresponsive to a normal "Quit" signal, force quitting any application is not recommended because unsaved changes will be lost. In the case of the "Finder", any sort of file transfers in progress will be interrupted. Data loss may also occur if a file containing "comments" has been moved at some point earlier in the login session.
A normal "Quit", such as what occurs when logging out, quitting through the menu, using AppleScript or the "Quit" option of "Activity Monitor.app" ensures that the app quits in an orderly manner.

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problems to reconize the sim card after upgrade itunes, what should I do???

Problems to reconize the sim card after upgrade itunes, what should I do???

Get a SIM card from the carrier to whom the phone is legitimately locked.

An unknown error occurred (-42110) when opening itunes after upgrading

when opening itunes i get "an unknown error occurred (-42110) when opening itunes after upgrading to latest version.

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

Problem with WCS Audit status missmatch after upgrade

We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3 WLC : 6.0.188.0.
how I can fix the problem?

Hi,
Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
Regards
Surendra

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

IPhone connections hangs when sending email after upgrade.

After upgrading to 2.0 firmware on my first generation IPhone, the phone now regulary hangs when sending email via smtp. Even if I try to close the connection by putting it into AirPlane mode and back again it still hangs and from that point onwards doesn't check or send any new emails. If I then shut the phone down and restart it looses the email as it's not either in the sent or outbox folders. This has happened quite a few times since upgrading. Does anybody have any advice?

Found this useful tidbit by mdwelsh231 on another thread:
"I'm having this problem too. Rather than rebooting the phone, an even easier solution is to hold down the Home button for several seconds (I believe it's 8 sec) which will kill the Mail application and return you to the home screen. Restarting Mail (by tapping the Mail icon) will cause it to reconnect. I find that this resolves the connection hanging issue. However, it is still kind of a pain. I suspect a bug in the 2.0 iPhone firmware. "
Worked for me
Cheers,
C

Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
hope someone can help me out.
I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
thnx in advance for the help

I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
Any help would be appreciated.

Problem in de-queuing xml messages after upgrade to 11g database

We just upgraded from database 10g to 11g. After upgrade we are facing a problem in processing xml messages smaller than 4000 bytes. Messages larger than 4K bytes are handled correctly.
We have Tibco IM/BW adaptors accessing Oracle AQ through JDBC Thin from other platforms than the DB is on.
These clients connect to the database with an application user (XXIO) which belongs to the APPS schema.
The client makes an enqueue to the queue-table XXIO_I00_I_JMS_Q_TABLE and in USER_DATA-part of the message the client specifies some header-information for the message with the actual data.
The enqueue is made with JDBC Thin 11.1.0.7 and with the aqapi.jar/jmscommon.jar-files from the rdbms 11.1.0.7-installation, so the API towards the database is of the correct version.
When the enqueue is done, the message has correctly been put into the table XXIO_I00_RT_I_JMS_Q_TABLE.
Now to the problem,
For example, we have a message that just has been put into the table, and it has a text_len of 3887.
The text-part of the message is put in text_lob, not in text_vc.
The problem now is that when the propagation starts
(execute DBMS_AQADM.ENABLE_PROPAGATION_SCHEDULE(queue_name => 'XXIO.XXIO_I00_RT_I_JMS_Q'),
the code for dequeue and move of the message, assumes that the text is in text_vc when text_len <= 4000 bytes.
Since that's not the case, the message propably gets errored out, and is put in the errorqueue.
The length of the messages that are put into text_lob vary from 2000 and up, so text_vc seems to be used only
for messages below 2000 bytes now. This problem occurred when we upgraded the DB and client API to 11.1.0.7.
Any pointer will be helpful.
Thanks

here is the output
HOST LOWER_PORT UPPER_PORT ACL ACLID
smtp.ABC.com 25 25 /sys/acls/ACLPORTA25.xml A275C7806DD74DE38F95D7E17794803D
mqlinuxext.serasa.com 4081 4081 /sys/acls/ACLPORTA4081.xml 85ED7A539AAC4A419C828D0EC037C090
mqlinuxext.serasa.com 80 80 /sys/acls/ACLPORTA4081.xml 85ED7A539AAC4A419C828D0EC037C090
mqlinuxext.serasa.com /sys/acls/http_access_acl.xml 40C25DBC57E4476BA7906652EBD50332
Thanks a lot

Problems with result area in workbooks after upgrade to BW 3.5

Hi,
we are experiencing some problems with our <b>workbooks</b> after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message <b>'Result area</b> cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
Has anybody had similar problems and has found a solution for this?
Thanks,
EMS

Hi,
I am having that message, always if I delete a Sheet which contains an embeded query.
Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
To find out if this is your case as well,
select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
Regards
Vasso
Message was edited by: VASSILIKI SIAGRI

Opera crashed when using gmail after upgraded

After upgraded 3 days ago,I got the problem of opera crashed when I am using www.gmail.com.
Don't know what's wrong.Does anyone have the same problem?

I am one of the men who moved form firefox to opera,because opera launch faster than firefox,so I will wait another version that fix the crash problem.
Someone said the opera8.52 is faster than opera9,is that true?
I don't like the bt in the opera,I have my bt client better than him.

Problem with PO text in ME22 after upgrade

Hi,
I face an issue in Purchase Order Text. We have recently done the upgrade from SAP 4.6 C to SAP ECC 6.0. Before upgrade, the users were entering required texts in ME22 transaction for each item and select the check button available. All the text types ticked here are carried forward and printed on the Delivery output.
After upgrade, this tick is removed from all the existing documents and also for the new POu2019s users select this button and save it. But, when they come back and see it in change mode ME22, the tick is not available. Because of this issue, these texts are not printed in delivery outputs now.
I have checked this problem in SAP. No relevant notes are available. Has anyone faced this issue before? Can you please throw some light on the same?
Thanks and Regards
Vijayakrishna

Hi
Please, see these notes
Note 751441 - Consulting: Settings for texts from purchase order
Note 53593 - Q&A - Delivery text from stock transfer order
Note 417883 - Texts from purchase order
and related notes. They talk about how to copy text from PO to delivery (for instance, in SC, STO and so on). It's related with some customizing steps in VOTXN and some VOFM subroutines that perhaps they are lost after the upgrade.
I hope this help you
Regards
Eduardo
Edited by: E_Hinojosa on Aug 24, 2011 10:22 AM

Problem with ADF Security / SQL Authenticator after upgrade to 11.1.1.6

Hi,
We have an ADF application built with JDeveloper 11.1.1.2 that's been in production for a couple of years. Now we are in the process of upgrading to 11.1.1.6 so I have upgraded WLS and ADF in a test environment and re-deployed the application there. The application uses users and groups from database using SQL Authenticator configured in WLS. This worked fine in the old version but now after the upgrade we can't log in with credentials from the database. I can log in if I add a user to the default authenticator. We didn't touch any of the authenticator settings or security realm configurations during the upgrade. Both authenticators are marked as SUFFICIENT, as they have always been.
Has something changed in the way SQL Authenticator is used since 11.1.1.2? What could be the problem?
Regards,
Joonas

Answering myself here: after recreating the SQL Authenticator and the ADF Security configuration logins are working again. Don't know where the problem was though.

Problem unmounting filesystems when rebooting/halting after upgrade

Similar Messages

Maybe you are looking for