Problem updating Logic Studio

Hey there all,
I have been having a problem updating Logic Studio 9. My purchased version is 9.0 (full, not upgrade) and I tried to update to 9.1 a while ago. When I did it, I got this very strange error message that said there was a system error of some sort. This of course sent me in to a panic, however my system itself seems to be stable, so I can only assume this is a problem with the updated software.
Eventually, I deleted the updated software (which left 9.0 on my system), and since then (this was a WHILE ago), I've spent a lot of time trying to figure out what to do to be able to update the software. I can't tell you how many times I have uninstalled, reinstalled, and re-uninstalled the original disks. I just can't get the software updater to recognize that I uninstalled 9.1 so that I can re-download the software update. And for god know what reason, I am not able to connect to the downloads server to get the upgrade.
Can anyone tell me where/how/if I can fix this?? Logic 9.0 keeps crapping out on me. I'd like to have access to my songs, etc.

hi, Colpanique.
A couple of ideas. Is your OS up to date? Are you running SL? It's better for LP9 than Leopard. Is LP9 registered?
Software updates sometimes have a proapp u/date. This is for Logic/final cut etc. If they aren't on your system, the later LP u/date might not install.
Another reason why LP 9 caps out is ram. I have LP8, and I know 9 requires more ram. 1G is at the low end, and might be insufficient for the OS and LP9. Run out of ram and the app will crash. This true if you load samples or drums etc,
If LP 9 isn't registered, the apple server won't let you get 9.1. I tried, as I wanted to go from 8 to 9 and bypass the bugs in LP 9.0. 9.1 is more stable.
Anyway, hope thsi is of some help. Good Luck. Scorpii Pirates.

Similar Messages

Guitar Rig/ Rig Kontrol problems in Logic Studio

I have recently upgraded from Logic Pro 7 to Logic Studio. I never had any problems until the upgrade but now my Rig Kontrol 2 refuses to work claiming...
"The device 'RigKontrol2' could not be set up by the driver. This can be caused by bad USB connections or insufficient power on the bus."
I am using a USB direct from the back of the mac (and tried new leads) and have updated the drivers to the very latest version but nothing is working. I can still see Guitar Rig as an option amongst my inserts but as soon as I plug in the RigKontrol then ALL of my inserts blank out and no sound is output at all.
Any ideas anyone?
Many thanks Nick.

My only idea (and this comes from being an owner of Guitar Rig 2 w/ the Rig Kontrol for ALMOST two years now) is that the Rig Kontrol is a faulty piece of equipment. . . period. I regret purchasing it more than any purchase I've probably ever made. It was so faulty w/ Logic 7 and Pro Tools that I was like, screw this, and put it away in a closet and have never touched it since. The GT2 software is FANTASTIC. . . don't get my wrong, I love my Guitar Rig software, but the Rig Kontrol is a piece. NI's support for it is pretty poor too. It's probably just some kind of issue between Logic 8 and Rig Kontrol, however, try going into Audio/MIDI setup and getting it to recognize through there.
My advice would be to just ditch the Rig Kontrol.

Updating logic studio 8 - help needed!

Can anyone cleverer than me help me with a problem?
I bought a second hand mac book pro and it had a copy of logic pro on it that when you opened it asked for the serial number. I had logic plat 6 on my previous mac and I bought the update to studio pro 8, installed it with the xs key in and it all seemed to work fine until i did a software update and tried to launch it again. It just came up asking for the serial no as before which the upgrade version doesn't have on the packaging. I then have to reinstall which again works until i try to update.
I have tried:
uninstalling logic using appzapper before reinstalling.
entering the serial no that is shown when the app is opening up.
running update with the xs key in.
none of these have worked and it's starting to get annoying. I think it must be to do with the version that was on the machine when i got it but using appzapper i have no idea how to get rid of it.
Any help on this would be hugely appreciated.
thanks in advance.

It just came up asking for the serial no as before which the upgrade version doesn't have on the packaging.
You've confused me with this. Are you saying that your Logic Studio Upgrade package doesn't have a serial number? Because it should. Inside the box are several thin documents, one of which is called 'Installing Your Software.' You'll find your serial number on that.
It's very possible that if you used App Zapper to uninstall the previous LP8 it didn't find the folder that contains the Serial #, and therefore Logic is still running on your friends number. (I just opened LP8 in App Zapper and it didn't find that folder). Go to Your User/Library/Preferences/Logic, and dump the files within that folder. There are Logic preference files in the Preferences folder, but you want to dump the ones *inside the Logic folder within the Preferences folder*.
You shouldn't have to reinstall Logic to get it to be under your license. Just dump the files mentioned above, start Logic, put in the Serial Number in your package, and then it will be running on yours. You might need the XS key in for that.
Once it's all squared away, and it's running from your serial number, you should be able to update Logic without the XS Key and without having to put in your Serial Number each time.
Good Luck!

Problem installing logic studio to my mac 10.6.8 PLEASE HELP!

I am having trouble trying to install Logic Studio on my mac book pro 10.6.8 when i click on the "logicstudio.iso" file it mounts the file but when I "double click" on the "dmg" file nothing happens the "installer" doesn't pop up. I have installed other programs, the installer pops up and installs these programs with no problem. I have no idea why this is happing please PLEASE HELP ME

REboot holding CMD+r keys to boot from your Restore partition, useDisk utility from there to firstRepair Disk, then Repair Permissions.

Problem Upgrading Logic Studio to 9.1.1 From 9.0.2

I was on Snow Leopard with Logic Pro with version 9.0.2. I upgraded to Lion (big regrets but that's whole different story) bottom line is that version 9.0.2 no longer runs. I get a pop-up window that says "You Can't Use this Version...". Not a big one, so I go ahead and download the latest Logic Pro 9.1.1 and try to install. But It won't install. It says "Your Computer Does Not Need This Upgrade". I don't know what to do next. Is there a resource file that I need to trash or what would you suggest?
Thanks!

Got it. Found similar postings with the solution. I'll re-stated it just to save anyone running into this post a bit of search time.
1. Go to the Application folder. Find the Logic Pro application and edit the application name. Get rid of the numbers and spaces if any. Just leave it as Logic Pro.
2. Re-attempt to install 9.1.1 this time it worked for me -well, sort of. It turns out that 9.1.1 is also no compatible with Lion.
3. Launch the Software Update application and updgrade to the latest version. For me it was 9.1.5.
All seems well.
Thanks.

Can´t update logic Pro 9.0.0 to 9.1.3

Hi
I have a problem updating logic pro. I was wondering, my version is still 9.0.0 and the automatic update never find any updates for logic. So I downloaded the update manually, but I receive a massage...that there is no logic 9.0 on the system and I can´t update...very funny, because there definitely is a logic 7, 8, and 9 on the system working.
Anyone with an idea out there?
Thanks
Mitsch

TBPlayer1950 wrote:
As well as being in the Applications folder, you MUST NOT rename the app. It has to be "Logic Pro.app" or the updater will not find the file.
Cheers
TB
...or just *Logic Pro* (if you have the .app suffix disabled systemwide, which I believe to be the default in OS X)

Just reformatted....Still can't update Logic to 7.1.1! What's going on?

Alright, this is driving me quite mad. This is my original thread: http://discussions.apple.com/message.jspa?messageID=2061139#2061139
Basically in a nutshell, I am having an issue trying to update Logic Pro 7.1.0 to 7.1.1. I have gone and done what some kind and helpful board members here have advised me to do; I've done and repaired my permissions and I've went through the disk utility to repair any disk errors. And I have been in a tech support email exchange with Apple's Logic Pro Support for about a week now, and their final word was "ERASE & INSTALL"
And here I am, fresh off a clean install of Tiger and the error still lingers.
At this point, I no longer have a clue of what might be the issue anymore. My only guess is...could the actual installer file on Apple's server somehow become corrupt? My guess is no, because some board members from my last thread had noted that they had absolutely no problems updating Logic without any hassles.
I know this is a very miniscule error. It is only a minor update to Logic, but because it's still not corrected after a clean install has got me worried.
Can anyone here see a solution to this? I would really appreciate any more help.

I'm on Tiger 10.4. The reason why I haven't upgraded to 10.4.6 is because I really don't feel like updating Pro Tools LE and the DigiCore Audio drivers to adapt to the new Mac OS update. But now that you mention it, could that be the reason why?
And I haven't changed anything in Logic's setup. Didn't create subfolders, move files, or anything. Just intalled it in the Applications folder. And I know its in there.

Problem: I bought Logic Studio 8, then the Logic Pro 9 Update, and now lost

I can't start Logic, after...
- I had a running Logic Pro 9 system, that I installed with an upgrade to my bought Logic Studio 8. Ok, back then.
- Then I did a big mistake: I have thrown away (because I did not think it was necessary to keep) the manual and the CD of Logic Studio 8. So I lost the Serial number, which was printed in the manual, and I lost the CD too.
- Back then, that was not a problem, because I had a running system.
- Now I tried to install on a second machine, and I could not. I ordered a new serial number, and I received it from Apple support. But it looks like I have received some Logic Studio number and in the mail they don't say which version. Since it is called Logic Studio, I assume the serial is for version 8. But I can't install that because I lost the version 8 CD too...
- So I now need a new Logic Studio version 8 CD ? I tried to order that by fax (the same support number that also sent me the serial), but no response from Apple.
- Now I have moved my main machine to another Mac Pro (Firewire Transfer) and now I must also enter the serial number and none of the ones that I have works.
I feel like Apple should provide me a complete set of Logic Pro 9, CD and serial. This would make my life easy again. I would also cover the expenses.
What shall I do?
Who can I contact?
Btw: it seems to be really hard to get Logic support. Apple is a big company...

Marky Goldstein wrote:
I feel like Apple should provide me a complete set of Logic Pro 9, CD and serial. I would also cover the expenses.
So that's settled then. Move on over to the Apple Store. A complete set of Logic Pro 9, CD and serial comes at 499.-
If you have proof of purchase of L8, it might be less, but that would imply you haven't thrown that away too.
Christian

Logic Studio, not compatible with my new iMac?? downloads or updates available?

I just bought a new IMAC 21.5 And Logic Studio from Apple Store. After installing Logic I get the message that Logic doesn't support my version of computor? Spec PROCESSOR 3.1GHz Quad-Core Intel Core i7 MEMORY 16GB 1600MHz DDR3 SDRAM-2X8GB HARD DRIVE 1TB 5400-rpm Serial ATA Drive.
Can I down load some update for Logic or my iMac so I can get Logic to work??
Thanks!

Problem solved!
Just needed to update some software...
Thanks anyway!

I can't update to Logic Studio 9

I just bought a MacBookPro, I try to install Logic and it tells me that power PC applications are not supportrd.
Ironically I bought an upgrade to Logic Studio just one year ago and I can't use both of them. Any suggestions?

Hi
Which version of Logic Studio and 'upgrade' are we talking about here (the one with Logic 8, or the one with Logic 9)?
The only problem with the original (Logic 8) Studio on Lion is that the Installer will not run (PPC application). Logic 8.0.2 itself runs fine on Lion.
If the OP has a Logic 9 Studio upgrade, all that is required is to install the upgrade disks and to enter the original and upgrade serials. Software updates may well be required after installation.
CCT

Problems upgrading from Logic 6.4 to Logic Studio

I recently had my hard drive die, so i am now in the process of reloading all my software. I started with Logic 6.4 years ago and have been purchasing the upgrades ever since. I first installed Logic 6.4 with the dongle inserted than i installed Logic studio. I than updated the software. However, now Logic will not open. I get the prompt;
"Upgrading from Logic 6.4 to Logic Studio running 10.6.7 2.66 i7 17 inch running problem. After install Logic will not open. Updated all the software. On a Macbook Pro"
Is there something i'm doing wrong.
thanks for any help.
David

Choose About this Mac from the Apple menu, check if the computer has at least 2GB of RAM, and if it does, click here and order a download code for Lion 10.7. Doing this costs money; you may find it easier and cheaper to upgrade to Yosemite, which is free.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(122702)

After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding, do anyone have any ideas what problem it can be?

After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding on certain moment, i tried to reinstall freshly and update to version 9.1.5 but problem same so at this moment version is 9.1.6. I tried 64bit too but no changes. And the thing is that i need studio and i need to sort this problem quick.
Please everybody if you had same problem give me answer or any idea what to do
Thanks

The sample rate is not 128 or so, you probably mean the buffer size...
But the performance drop makes sense: switching between a 64 bit process and 32 bit doesn't come free: it cost performance and creates a jitter, which also either shows as performance lost or instability.
You really have to move away from outdated 32 bit AudioUnits, sorry. Ask the vendors to finally release 64 bit versions, it has been several years since 64 bit is available.

Very Strange Logic Studio Installing Problem, please help !

Hello .
I wanted to install Logic Studio 9 on a brand new imac and somehow installation was failed .
Than i erased what ever i could which was left from the failed installation .
And now i am trying to reinstall, but this time Installation is not asking me Audio Content 1, 2 and 3
And also after Jam Pack 1, instead of continuing to 2 and 3, is asking to put install disk , and after that point installation getting failed again .
So far what i erased after failure was (only the ones i could find out of this list )
Application Files
/Applications/Compressor
/Applications/Logic Node
/Applications/Logic Pro
/Applications/MainStage
/Applications/Soundtrack Pro
/Applications/WaveBurner
/Applications/Utilities/Apple Loops Utility
/Applications/Utilities/Impulse Response Utility
Factory Settings, Instruments
/Library/Application Support/Logic/
/Library/Application Support/Garageband/
/Library/Application Support/Garageband Content/ (Legacy)
/Library/Application Support/Soundtrack Pro/
/Library/Application Support/WaveBurner/
Impulse Responses
/Library/Audio/Impulse Responses/
Receipts
Receipts can vary quite a bit depending on your system. Try to find all those that look like the following:
/Library/Receipts/AudioContentforSoundtrackProXX.pkg
/Library/Receipts/CompressorXX.pkg
/Library/Receipts/EXS24SamplerLibrarySamples.pkg
/Library/Receipts/EXS24SamplerLibraryStudio.pkg
/Library/Receipts/GarageBandXX.pkg
/Library/Receipts/ImpulseData.pkg
/Library/Receipts/ImpulseResponseUtility.pkg
/Library/Receipts/JamPackXX.pkg
/Library/Receipts/LogicXX.pkg
/Library/Receipts/MainStageXX.pkg
/Library/Receipts/RemixToolsXX.pkg
/Library/Receipts/RhythmSectionXX.pkg
/Library/Receipts/SharedLogicStudioHelpFiles.pkg
/Library/Receipts/SoundtrackProXX.pkg
/Library/Receipts/UltrabeatXX.pkg
/Library/Receipts/WaveburnerXX.pkg
User Preferences:
~/Library/Preferences/com.apple.logic.pro.plist
~/Library/Preferences/com.apple.logic.pro.cs
~/Library/Preferences/Logic/ (Legacy preferences)
License
/Library/Application Support/ProApps/Logic Studio System ID
Apple Loops
/Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand/
/Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
/Library/Audio/Apple Loops/Apple/iLife Sound Effects/
/Library/Audio/Apple Loops/Apple/Jam Pack 1/
/Library/Audio/Apple Loops/Apple/Jam Pack Remix Tools/
/Library/Audio/Apple Loops/Apple/Jam Pack Rhythm Section/
/Library/Audio/Apple Loops/Apple/Jam Pack Symphony Orchestra/
/Library/Audio/Apple Loops/Apple/Jam Pack World Music/
/Library/Audio/Apple Loops Index/
But what ever i tried, gives no solution . At the end a fail .
How can i wipe out all the Logic existence from my computer to make new install ?
Or, what is this problem i am having? As installation is not asking some discs which is necessary for the setup anymore .
Did anyone experienced that ?
I will be very happy if someone can assist on me this . Since 5 hours i am trying to setup this thing .
Thanks a lot

it is very frustrating to see such an installation problem happening from a "professional" called DAW .
I am actually a Protools user , and i have never had this type of complications .
I mean come on, i am just trying to install the thing .
On a new system, on a new computer and from an original purchase .
I believe i have enough computer knowledge to instal a simple software .
But i am spending almost 10 hours since yesterday to install Logic .
Instead of making designer boxes or giving fancy advertisements, i am inviting Apple Engineers to create proper working software .
Especially to see a professional audio software like Logic in this epic fall, is very very bad .
I mean you can say i am problematic and don't know how to instal a simple software, but than please write to google, Logic installation problems , and you will see thousands of issues .
Whatever i am writing here not against to the people who are replying and want to help , i just want Apple to read this .
Ah , i am sure Apple won't put attention on it , but doesn't matter .
You just lost 1 customer for Logic
I am erasing this thing now from my computer and continue with Protools as the way i was doing .
Sorry if i am bitter, but this is not acceptable .
Message was edited by: timbre2010

Logic Studio Install Problems

Purchased Logic Studio a couple weeks ago. The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it. Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday. Install problems continue but now different. Orginal set woudl load a coiuple of disks then error out. This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out. Tried several times and even tried inserting other content disks. I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc. On this set my SoundTrack Pro option is grayed out and I cannot select it to load. I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did. Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
My system config is:
Processor: 3.4 GHz Intel Core i7
Memory: 16GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6970M 2048MB
Software: Mac OSX Lion 10.7.5 (11G63b)
1TB Internal SATA Disk (This is the drive I am attempting to load on)
256GB Flash Storage
12TB (RAID 5 Configure to 6TB) Pegasus External
This evening I will call Apple Support again, but any advice from the audience is much appreciated.
Signed: Frustrated but Determined

Purchased Logic Studio a couple weeks ago. The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it. Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday. Install problems continue but now different. Orginal set woudl load a coiuple of disks then error out. This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out. Tried several times and even tried inserting other content disks. I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc. On this set my SoundTrack Pro option is grayed out and I cannot select it to load. I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did. Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
My system config is:
Processor: 3.4 GHz Intel Core i7
Memory: 16GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6970M 2048MB
Software: Mac OSX Lion 10.7.5 (11G63b)
1TB Internal SATA Disk (This is the drive I am attempting to load on)
256GB Flash Storage
12TB (RAID 5 Configure to 6TB) Pegasus External
This evening I will call Apple Support again, but any advice from the audience is much appreciated.
Signed: Frustrated but Determined

Pro Applications Update 2008-02 Update for Logic Studio Owners?

I received Compressor 3.0.3 as part of the Logic Studio 8 bundle.
Pro Applications Update 2008-02 states that it upgrades Compressor 3.0.3, however, Software Update does not offer to update Compressor nor can I download it manually since it is demanding that I provide a Final Cut Pro serial number (which I do not have, I have only the Logic Studio serial number which it won't take).
Does anyone have any idea what Logic Studio owners are supposed to do to obtain Pro Applications Update 2008-02?
Dave

Well, I would agree except that the update specifically provides an update for Compressor 3.0.3 which Logic Studio owners have as well and the update description states that it is recommended for all Logic Studio users.
"Pro Applications Updates improve reliability for Apple's professional applications and are recommended for all users of Final Cut Studio, Final Cut Server, and Logic Studio.
Pro Applications Update 2008-02 addresses installation issues, compatibility updates, and general performance issues and improves overall stability.
Applications included in the update:
Final Cut Pro 6.0.4
Compressor 3.0.3"
Dave
Message was edited by: daveporter

Problem updating Logic Studio

Similar Messages

Maybe you are looking for