Problem updating razr v3i

When I connect my phone, itunes recognizes my phone and updates. Then when I drag a play list or song to my phone icon , I get a message that it is updating but after a few moments a pop up returns with this message. "The mobile phone cannot be updated. The disk could not be read from or written to."
Yes, there is a memory card properly installed in my phone.
Yes, my phone is set to Memory card already.
I already checked "enabled disk use" and I already checked the "Convert higher bitrate songs to 128 kbps AAC" in the Preferrences option.
What can I do to get the itunes to update my phone? Any help is appreciated.

I'm experiencing the same problem and unfortunately do not have a solution, albeit I can add that so far only certain songs seem to be unable to transfer, while other songs go over just fine. When the transfers fail, I get a beep from the phone as though the cord were disconnected and then reconnected. My computer does not register any disconnect, but it seems as though the phone senses that it has been. At this time I am only trying to transfer songs from my Windows machine, later on I will try and use my Powerbook, but I have no reason to suspect this is a platform issue. Right now I'm transferring songs just fine, unfortunately not the ones that I really want on it.

Similar Messages

Razr V3i and iTunes Problems

I got a brand new, unlocked Razr V3i with iTunes built in from a store right here in NY. I started transferring some songs and podcasts right unto it and it worked fine. But it has suddenly stopped docking in iTunes. I'm using a mac and it's been going fine so far until it stopped docking. The message still shows up on the phone saying do not unplug the cable. Has anyone else had this problem? If so how did you fix it?

If you have an iPod, you know that sometimes you might have to reset it to get it to cooperate. This involves pressing a couple of controls simultaneously.
Your mission, Jim, should you decide to accept it, is to find a similar set of inputs for your phone. Unless, of course, that phone is going to self-destruct in a cloud of gray noxious smoke as soon as you finish listening to this message.
Oh, wait. I see your name is kirk. Don't think that I'm mistaking Star Trek for Mission Impossible, here. :-D
My recommendation is to get on the double A down to Sheridan Square. The cell phone is not supposed to work underground, therefore, you won't miss its other functionality so much. 8-/

ISync not syncing all contacts to Moto Razr V3i

Hi,
I have a Motorola Razr V3i that I'd like to sync with my Mac address book. I'm running Leopard 10.5.1. I keep the Address Book as the reference for all my contacts. When I connect my Razr to the Mac, I want to replace all the contacts on the phone with the entries in the Address Book. I have set options in iSync to sync all contacts with phone numbers. I am facing two problems with this:
1) During the sync, the application tries to replace data on my Mac with data from the phone. Is there an option that I can set by which the information on the Mac is never overwritten by the information from the phone? I want information to go one way all time - from my Mac to the phone.
2) After the sync, I discovered that not all the contacts had been imported. A few random contacts are not transferred from the Mac to the phone. I thought that this might have something to do with the fact that the phone used to be synced to my earlier install of Tiger. So I did a "master clear" and a "master reset" on the phone. But even after doing that, some of the contacts (different ones this time) were not synced. And due to the problem described in #1, iSync tried to replace all my existing contacts on the Mac with blank information on the phone.
What's the point of iSync if I have to check whether all contacts have been imported, and manually enter the ones left out. I checked for a software update on the phone, but there was none available.
I'd be happy to provide additional information to get this problem fixed.
Thanks,
Saurabh

I am having the same problem with Leopard 10.5.1 Isync and my razor V3 from Cingular. In addition the contacts in my address book are duplicated after syncing with my phone. Basically after using Isync my address book gets doubled and cluttered with names and no phone numbers, the data gets completly screwed up. Whats going on?

50 Song Limits (ROKR, RAZR V3i and SLVR)

I have an unlocked V3i that I put my AT&T sim card in from my work phone. THe V3i is terrific but for the fifty song limit. As suggested on other websites, I went to: itmss://phobos.apple.com/WebObjects/MZFinance.woa/wa/upgradePhone.
No luck. Does anyone know if the above link works in other countries? If so, would switching "select your country" from within iTunes make the update work?
Any other fixes or mods out there?
Powerbook G4 1.67 15" (w/ Verizon evdo card); iMac G5, Airport Extreme and two expresses Mac OS X (10.4.5)

Please stop. It is indeed available in Australia as well as other countries. As I said before, it is right on Motorola's web-site. Don't believe me? Look for yourself: http://www.motorola.com/motoinfo/product/details/0,,130,00.html
Quote from site:
** The Motorola RAZR V3i is available with iTunes in ONLY the following markets:
Australia, NZ, Indonesia, India, Singapore, Malaysia, Philippines, Vietnam, Turkey, South Africa, Rest of Africa, North Africa, Israel, Thailand, Middle East
Additional markets may be added at a later date. Please check with your local Motorola representative for additional information.
Now, my question still stands: Has anyone else out there gotten an unlocked Motorola phone with iTunes from overseas and figured out a way to raise the 50 song limit to 100? Has anyone successfully used the link provided above in my original post either by switching your country within iTunes or by another means?
Thanks in advance to anyone with any experience with this.
Powerbook G4 1.67 15" (w/ Verizon evdo card); iMac G5, Airport Extreme and two expresses Mac OS X (10.4.5) RAZR V3i
Powerbook G4 1.67 15" (w/ Verizon evdo card); iMac G5, Airport Extreme and two expresses Mac OS X (10.4.5) RAZR V3i

There was a problem updating InDesign CC For more information see the specific error below. Update Failed Download error. Press Retry to try again or contact customer support.(49)

Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

Click here and follow the instructions.
(98724)

HI there, am having a big problem updating mu iphone due to me forgetting my password, can you tell me how to retrieve it. It seems like i have one apple id for downloads and a different one for updates. Can you help ps.?

Hi There
Am having a big problem updating my iphone 4 Apps, due to a problem with my password for my apple id. But it seems that i have two different ids, one for the updates and another for the downloads. I am not able to retrieve my Id password for updating my Apps. Can you help me ps?
Thank you

What program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager?

BRFplus: Problem updating values in an internal table in a loop expression

Hi
I'm looking into the loop expression type of BRFplus and I have come across a problem updating an internal table, I'm trying to create and populate the table using a loop, here is the functionality I'm trying to achieve:
In a rule set create an internal MONTH_TBL table containing 12 rows of two columns: MONTH_NUM containing values 1 through 12 and MONTH_VAL containing an amount (initially 0,00 EUR in all 12 rows).
After initializing the table traverse through SFLIGHT table and for each row add PRICE from the table to MONTH_VAL in the row of MONTH_TBL corresponding to the month of FLDATE field in SFLIGHT.
The initialization of MONTH_TBL works as intended, as does the traversal of and retrieval of values from SFLIGHT. The problem however is the update of the internal table MONTH_TBL (defined as result data object for the function). I don't get an error, but the tables does not get updated, and I cannot seem to find out what the problem is. I would have attached an XML extract of the function + ruleset for information, but it dosen't seem like that is possible, I could e-mail it on request (for SAP employees with access to system QU5 the function is LOOP_TEST in application Z_KLAUS_TEST).
I hope that this is sufficient information to understand the issue that I'm dealing with.
best regards
Klaus Stenbæk, KMD

Hi Klaus,
The Loop expression is part of NW 7.02 which is not yet released. When you experience the problem as part of a test you should have a contact at SAP for dealing with problems/errors. Usually SAP-internal messages are used for this purpose. Please clarify with your SAP contact how the model is.
BR,
Carsten

Problems updating ipod touch 3g to os 5

Hi... I am very excited to see what all the buzz is about for the new OS 5.x for use on my ipod touch 3g but im having problems updating my device. my itunes has been updated to 10.5 and i have conected my touch to my computer and clicked on update. but all that comes back is that it is updated to the newest version which it states 4.2.1 .... but i dont see any of the new stuff that is supposed to be with os 5 i have erased and put my touch back to default settings and it still does the same thing. i erased using itunes when connected by the cord and i have tried using the reset feature on the touch itself w/o the cable. if anyone has some advice for me it would be greatly appreciated !!

heather from gravenhurst wrote:
it is an 8g & ive talked to the itunes support team and they say that it is indeed a 3g
Not true. Apple did not make an 8GB ipod touhc 3rd gen at all. They do not exist.
You can see for yourself:
Identifying iPod models

Problem updating Nokia N97 firmware over the arir ...

OK here goes,
I'm having some real problems updating the firmware on my white nokia N97
I recently bought it of the web as a 12 month contract onto t-mobile (not there website though) in th uk
After noticing some problems i googled and noticed a firmware update had been released on 1st july 2009
I tried to get the firmwae over the air (OTA) via typing in *#0000# and selecting check for updates. I get no updates available for nokia and t-mobile (unsure what the difference is?)
So i heard try using nokia software updater.
i downloaded latest version 1.6.13 and installed it on a windows vista 32-bit home premium laptop ok
i have also installed all of the stuff that came with the cd with the phone (ovistore etc )
when i plug the phone into the laptop i get four options (PC, media, usb and something else) first time it ran it installed the necessary drivers and so therefore when i now plug it it just connects as expected.
so the laptop is detecting the nokia n97 at this stage
when i then load nokia software updater click next i put the phone into general mode on full charge with a sim card in it and click next again to detect the phone is pc suite mode
after about 2 minutes it says it can detect the phone although i can go to my computer and traverse the folder view!
i can even set it off looking for the phone pluggin it in and the autoplay options of vista will kick in in the background detecting the phone (ie outisde scope of nokia software updater)
i have tried all different connections mode pc suite mode etc different profiles nothing. tried it onto different pcs with different windows version on it. tried reinstalling software updater
my software version is 10.0.012 and my product code is 0587240
interestingly when i goto the can i update on nokias website it says no i have the latest version when i supply this information. weird
im kinda in catch 22 because there is a bug with pc usb detection of the phone in version 10 but i cant update to version 11 because of this bug
its driving me nuts any help greatly appreciated
thanks in advance
Cheers
kyle

kyletindle wrote:
i did a hard reset using *#7370# and locking code 12345 and the phone did reset but software updater does still not recognise the phone whilst ovi suite does and nokia sync etc
to make matters worse it has broke my facebook app error: undefined
mega
just what i wanted cheers nokia
It will break your facebook as you have re-formatted the C: drive of you phone. Was you facebook installed to the E: drive by any chance?
Go to OVI Store and re-install it.
It may be work installing it from OVI Store then un-installing that one to clean off the mess you have been left with post formatt and then re-installing it fresh from OVI Store.
As I always say. Before doing a re-format always uninstall all apps/widgests before doing a hard reset or factory reset.
I also do a this and a factory reset before firmware updates to clean my phone. Should really do a hard reset/format as this would be cleaner still, but tehn I would have to do a lot more set-up afterwards.
N97 (Product Code: 0585262 (Voda UK)) FW 12.0.026
95 8Gb (Product Code: 0558787 (UK)) FW 31.0.018
If a post by a user has been helpful, please click on the Kudos! button.

I have problems updating my app in the appstore. How should i update using itunes? Currently, i'm unable to use all of my apps.

I have problems updating my apps in appstore for my IPad. How should i update it using itunes? I'm unable to see all the apps currently.

Hallo. If all of your apps purchases from the same Apple ID, you can try to update them on iTunes, ways as below:
iTunes 12 for Windows: Download previous purchases from the iTunes Store
iTunes 12 for Mac: Download previous purchases from the iTunes Store
Regards,
Anson

I am having problems updating my itunes to the latest version, on each stage I am getting a message 'The feature you are trying to use in on a network resource that is unavailable.' I try to click OK it fails and I do not know an alternate path to select

I am having problems updating my itunes to the latest version, on each stage I am getting a message 'The feature you are trying to use in on a network resource that is unavailable.' I try to click OK it fails and I do not know an alternate path to select, please help?
I get message like below on each stage of the update, Quicktime, Safari & iTunes;
It's so annoying as until I update my iTunes account my phone won't sync.

Many thanks for the screenshot. (The key to these is knowing which particular .msi file is being mentioned by the message.)
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
(Assuming that the QuickTime and Safari messages were also citing bonjour64.msi, you should also then be good to go with those installs too.)

Problem Updating iPod software on iTunes

I am having problems updating my iPod software through iTunes. As soon as it gets to the end of the download, an error message comes up (-48, I think) that states there was an error in downloading the update. It suggests to check my internet connection or try again later. It happens everytime. I have a very stable internet connection and my iTunes software is version 7.1.1.5
Please help me! Thank you.

See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem.

Problem updating IDS signatures

I have a IDS-4215 sensor with version 5.1(5)E1S333V1.2
I tried several times updating signatures with next version on it but it doesnot get updated and only the local MC gets upgraded. I have other IDS sensors also but I dont have any problem updating signatures with them.
Why are the signatures not getting updated on this Sensor.
Help me with a solution. All helpful posts will be rated.

Did you try applying S355 directly to the sensor using the CLI or IDM rather than the MC?
Sometimes you don't get good error messages when trying to apply through the MC.
If you apply through CLI or IDM did you get any messages back from the sensor?
Did you get a success messgae? If doing it from the CLI did it come back to a CLI prompt?
If no error messages come back when trying the upgrade, then it will require looking at a "show tech" from your sensor to try and see what is going on.
You would not want to copy that output to this forum, so your best bet would be to open up a TAC case and provide them the output from when you tried applying the update through the CLI or IDM, as well as the output from the "show tech" taken immediately after the failed upgrade attempt.
I am not currently aware of any situation where the upgrade would fail without some type of error message being returned.
Here, however, are some common errors that should return an error message (I don't remember the exact wording of the error messages):
1) sensorApp/analysis engine is Not Running
(you can check "show version" before doing the upgrade to make sure it is Running).
2) sensorApp/analysis engine is not responding (you can do a "show stat vi" before trying the upgrade to ensure it is responding to statistic requests before trying the upgrade)
3) license has expired (you can do a "show ver" and make sure the license has not expired)
4) Signature Update already installed - This is a tricky one. This can happen when a previous attempt to update at that same signature level failed, but left some remnants around. The second attempt to install the same update detects the remains of the previous failure and incorrectly thinks that the update is already installed. There are 2 ways to recover from this. Save off the config, and do a recover-application command to re-image the sensor, then re-apply the config. Or wait till the next signature update S356 comes out and try it with the newer sig update. I haven't seen this problem in a long time, and I am not sure if it can happen anymore. Steps were taken to try and prevent this from happening.
5) sensorApp/analysis engine could stop During the signature update - This can happen on lower end sensors like the IDS-4215 especially when tunings have been made to the signatures or custom signatures have been created. The low end sensors have limited memory. When a new signature update is applied the sensor has to compile the new signatures. If using the standard set of signatures with no user tunings, then the signature update should apply fine. But if the customer has made tunings and/or added custom signatures, then this compiling of the new signatures could push the sensor above it's allowed memory limits. The kernel will then kill sensorApp/analysis engine. The signature update will never complete (never get an error OR a success message). And the sensor has to be rebooted to get it working again. If you are running into this issue you might need to remove some of your tunings and custom signatures, apply the signature update, and then re-apply your tunings.

Problem updating razr v3i

Similar Messages

Maybe you are looking for