Problem updating spam/saint

Hi all,
While updating spam/saint i m getting following error.
- Error in step: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0212
Any idea how to resolve this. This system is connected to another system in tms , the latter being domain controller. The tp versions in these 2 sys are diff. Can this be the prob..
Any suggestion?
Thanks,
Ajith

Hi,
You didn't say what system you using ? Anyway, go into SM59 and find the RFC connections used for TMS(usually two) under ABAP connections, try do a connection test, is it successful ? ..if not check technical settings are correct.
See note 96907 for further troubleshooting.
Nelis

Similar Messages

UPDATE SPAM/SAINT TRANSACTION (SAPKD70023)

I am trying to Update SPAM/SAINT transaction in Client 000. The log reports finished with return code 4, but the transaction still runs and the message below is: DD IMPORT finished with retyurn code 4. But it is working, yet.
I am updating the SPAM/SAINT transaction in Solution Manager 4.0 and the kernel release is 7.00 with patch level 83.

Import of the current OCS Queue (02.11.2007, 16:44:06)
The import is continued in phase 'CHECK_REQUIREMENTS'
Import phase 'PROLOGUE' (02.11.2007, 16:44:11)
Import phase 'PROLOGUE' was successfully finished (02.11.2007, 16:44:12)
Import phase 'CHECK_REQUIREMENTS' (02.11.2007, 16:44:12)
Import phase 'CHECK_REQUIREMENTS' was successfully finished (02.11.2007, 16:44:13)
Import phase 'DISASSEMBLE' (02.11.2007, 16:44:13)
Import phase 'DISASSEMBLE' was successfully finished (02.11.2007, 16:44:17)
Import phase 'ADD_TO_BUFFER' (02.11.2007, 16:44:17)
Import phase 'ADD_TO_BUFFER' was successfully finished (02.11.2007, 16:44:18)
Import phase 'MODIFY_BUFFER' (02.11.2007, 16:44:18)
Import phase 'MODIFY_BUFFER' was successfully finished (02.11.2007, 16:44:18)
Import phase 'TEST_IMPORT' (02.11.2007, 16:44:18)
Import phase 'TEST_IMPORT' was successfully finished (02.11.2007, 16:44:23)
Import phase 'IMPORT_OBJECT_LIST' (02.11.2007, 16:44:23)
Import phase 'IMPORT_OBJECT_LIST' was successfully finished (02.11.2007, 16:44:28)
Import phase 'OBJECTS_LOCKED_?' (02.11.2007, 16:44:28)
Import phase 'OBJECTS_LOCKED_?' was successfully finished (02.11.2007, 16:44:28)
Import phase 'SCHEDULE_RDDIMPDP' (02.11.2007, 16:44:28)
Import phase 'SCHEDULE_RDDIMPDP' was successfully finished (02.11.2007, 16:44:28)
Import phase 'IMPORT_PROPER' (02.11.2007, 16:44:28)
The 'IMPORT_PROPER' phase started at 16:44:28 but at now it is still running, at status line stays - "DD Import finished with returncode 4" ...
Can anybody helps to update SPAM/SAINT proper?

How long may it take to update SPAM/SAINT?

Hello,
I'm updating SPAM/SAINT Update - Version 700/0027; it has run for a long time during DDIC Activation. How long may it take for the whole process of update of SPAM/SAINT?
Thanks and regards,
Said

Dear Sayid ,
SPAM update generally not took tooo much time , in your case please check the log in
\usr\sap\trans\log for better understanding , there you can track the changes / update / error .
Hope this input help you to track / solve issue .
Regards ,
Santosh

No DDL commands found for activation while updating SPAM/SAINT

Hi,
Hi,
While updating SPAM/SAINT version 0053 (SAPKD70053) we are getting
error in activation.
If we check the logs we found error related to no ddl command found for
activation
No DDL commands found for activation of /SDF/SWCM_PAT03D
No DDL commands found for activation of /SDF/SWCM_PAT03P
No DDL commands found for activation of /SDF/SWCM_PAT03Q
No DDL commands found for activation of CLNT_CVERS
No DDL commands found for activation of CLNT_CVRS2
No DDL commands found for activation of CVERS_SUB
No DDL commands found for activation of PAD03
No DDL commands found for activation of PAT05
No DDL commands found for activation of PAT06
No DDL commands found for activation of PAT09
No DDL commands found for activation of PAT10B
No DDL commands found for activation of PATPRDVRS
No DDL commands found for activation of PATRTVERS
No DDL commands found for activation of PATSWFEATR
No DDL commands found for activation of PATSWFTINC
No DDL commands found for activation of PRDVERS
No DDL commands found for activation of STACKCOMPS
No DDL commands found for activation of SWFEATURE
No DDL commands found for activation of SWFEATUREINC
No DDL commands found for activation of TECHUSAGES
No DDL commands found for activation of TFDIR_INIM
No DDL commands found for activation of TRBAT3
We try to activate the table but were not able to activate it.It giving message that Table cannot be activated.
Attaching the error log files
System Details:
SAP NetWeaver 2004s
Database: DB2 10.5
Can anyone help us in this

Hi Amit,
From the logs you attached
2WETP000 13:44:36: Retcode 1024: error in DDL statement for "CLNT_CVRS2 " - repe
2WETP000 at
2EETP345 13:44:48: Retcode 1024: SQL-error "-601-SQL0601N The name of the object to be created is
2EETP345 identical to the existing name "SAP<SID>.CLNT_CVRS2" of type "VIEW". SQLSTATE=42710" in DDL
2EETP345 statement for "CLNT_CVRS2
Can you check in database for the existence of the object.
Also what is your kernel level ?
Regards,
Deepak Kori

NW70 EHP1 Update Problem w/SPAM/SAINT

Hello,
We have followed the guide for NW 7.0 EHP to update our system from NW 7.0 SPS18. The kernel update appears to be successful, and system -> status tells us that we are on the 701 kernel.
However, we are having trouble in SPAM/SAINT. We've downloaded the latest 701/34 kernel and attempted to update spam, but once the update completes and we restart spam, it is still at 700/34 (not 701/34).
Furthermore, we are able to load the 701 support packs from EPS/in, however, they never appear in SPAM or SAINT, and therefore they cannot be added to a queue and applied to the system. SAINT complains that the components are "701" and basically are not appropriate to install in a "700" system.
Obviously we are missing something here in the update process. What does it take to get SAINT/SPAM to recognize the 701 support packs? We've read through many docs and notes and have had no success.
Thank you.

Thanks for your help so far.
We downloaded the NW7.0 EHP1 SP3 at this link: http://service.sap.com/sap/bc/bsp/spn/sps/index.do?pvnr=01200314690900000866
I followed the stack guide at this link: https://websmp207.sap-ag.de/~sapidb/011000358700000087932009E.PDF
The downloads are:
File ;Description ;Component Version ;Instantiation ;Instances
SAPK-70101INPIBASIS;PI_BASIS Support Package 01 for 7.01;PI_BASIS 7.01;;Application Server ABAP
SAPK-70102INPIBASIS;PI_BASIS Support Package 02 for 7.01;PI_BASIS 7.01;;Application Server ABAP
SAPK-70103INPIBASIS;PI_BASIS Support Package 03 for 7.01;PI_BASIS 7.01;;Application Server ABAP
SAPKA70101;ABA Support Package 01 for 7.01;SAP ABA 7.01;;Application Server ABAP
SAPKA70102;ABA Support Package 02 for 7.01;SAP ABA 7.01;;Application Server ABAP
SAPKA70103;ABA Support Package 03 for 7.01;SAP ABA 7.01;;Application Server ABAP
SAPKB70101;Basis Support Package 01 for 7.01;SAP BASIS 7.01;;Application Server ABAP
SAPKB70102;Basis Support Package 02 for 7.01;SAP BASIS 7.01;;Application Server ABAP
SAPKB70103;Basis Support Package 03 for 7.01;SAP BASIS 7.01;;Application Server ABAP
SAPKW70101;BW Support Package 01 for 7.01;SAP BW 7.01;;Application Server ABAP
SAPKW70102;BW Support Package 02 for 7.01;SAP BW 7.01;;Application Server ABAP
SAPKW70103;BW Support Package 03 for 7.01;SAP BW 7.01;;Application Server ABAP
igsexe_13-10003077.sar;Installation for SAP IGS integrated in SAP Kernel;SAP IGS 7.00;AIX 64bit;Application Server ABAP
SAPEXE_23-10006210.SAR;Kernel Part I (for Basis 7.01);SAP KERNEL 7.01 64-BIT UNICODE;AIX 64bit/#Database independent;Application Server ABAP
SAPEXEDB_23-10006211.SAR;Kernel Part II (for Basis 7.01);SAP KERNEL 7.01 64-BIT UNICODE;AIX 64bit/ORACLE;Application Server ABAP

Update SPAM/SAINT package for release 7.00 terminated

Hi All,
We have installed solman 4.0 on windows environment. when i tried to import spam/saint update, it got terminated in the phase IMPORT_PROPER.
Also, in SM50 it is showing on workprocess running for long and gets terminated. I also have run SGEN once my installation was over.
0 DIA 4028 Running Yes 649 SAPMS38L 000 DDIC Delete D010INC
can anyone suggest what the problems would be..
Thanks and Regards,
sailesh K

Hi
I have tried three times. In fact I also restarted SAP System by changing rdisp/max_wp_runtime to 0 as there were lot of short dumps with timeouts.
I notice that currently job RDDGEN0L is running at present.
Also,
1) Dialogue work process running Report SAPMS38L with action Delete on Table D0101NC (User DDIC).
2) BGD Work process Status On Hold Reasn RFC with report SAPLSDDD (User DDIC).
SPAM Status is "MOVE NAMETABS FINISHED WITH RETURN CODE 0". Import logs finished with error code 4.
Regards
Chandu
P.S : FYI I am opening another thread with the same message.

Updating spam/saint manager

I have a freshly installed SAP ERP 6 system.
1. I can see that most components are on 600 and NW components on 701 release. When I navigate to transaction SPAM, the menu says Support Package Manager version 7.01 / 0033.
However, when I goto the OCS package directory, it shows SAPKD70029 and SAPKD70033.
Should the files not be SAPKD701** as its version 7.01 listed in menu bar ?
2. What is the latest level I can update it to ? Should it be SAPKD70043 or SAPKD70143
3. For downloading the latest package, from sap software download center, how do I know which of the following should I go for ?
SPAM/SAINT UPDATE 620
SPAM/SAINT UPDATE 640
SPAM/SAINT UPDATE 700
SPAM/SAINT UPDATE 701
SPAM/SAINT UPDATE 702
SPAM/SAINT UPDATE 710
SPAM/SAINT UPDATE 711
SPAM/SAINT UPDATE 720
SPAM/SAINT UPDATE 730
SPAM/SAINT UPDATE 800
If its just spam version, why dont we go for SPAM/SAINT Update 800 ?
Thanks,

Hi,
As I can see, you have installed EHP4 ready system whose netweaver version is 7.01. So, you should install SPAM update of 701 release i.e. SPAM/SAINT UPDATE 701.
SPAM updated of other release will not work because you need to install SPAM update based on netweaver release.
Thanks
Sunny

Update SPAM/SAINT

Dear all,
I have 3 SAP servers:prd、dev、qas(new),i want to update the qas's SPAM/SAINT,prd&dev's version is the same as 700/0020、700/0021、700/0024,but i can't find these packages at SAP site now,there are only 0038/0039 packages,if i don't update all 3 servers to 0038/0039,i just want to update to 0020/0021/0024,how should i do?
BTW:i am new about SAP basis,can you tell me how to install SPAM/SAINT?
Thank you in advance.

Dear Damon,
Before upgrading the support packages, you need to update the spam in the particular server.
log into the server via 000 client --> Run transaction spam / click on support packages and click on import spam/saint upgrade.
The system will automatically get upgraded to the latest spam version.
Coming to the support packages you need to decide which support packages you need to install in all the Dev/Qa/PRD server.
start applying support packages from dev server download it one server and start applying from one server to the other server.
Regards
Nizam

SPAM/SAINT Version Updation Problem

hi,
I have installed ECC 5.0 and i have also updated the Kernel,
but when i go to update the SPAM/SAINT Manager Version it shows that it requires at least 0018 Version of the Support Manager.
Can any body please suggest that what is the process of upgrading the SPAM Manager and if there any downloads required to update the SPAM/SAINT Manager.
It's Urgent.....!
Regards,
Ashish
Edited by: Ashish Chugh on Feb 18, 2008 11:58 PM

Hi,
You need to download the patch for SPAM/SAINT upgrade.
Http://service.sap.com/patces --> Enty by application group --> Additional components --> SPAM/SAINT update --> SPAM/SAINT update <version>
Download the latest version.
Uncar in /sapmnt/trans at OS level. Go to SPAM and click support package --> import SPAM/SAINT update
Best Regards,
Srividya.R

Error in spam/saint update TP_CANNOT_CONNECT_SYSTEM TP_INTERFACE_FAILURE

Dear All,
while i am updating spam / saint in saint t code I am facing an error TP_INTERFACE_FAILURE and reason for the error is TP_CANNOT_CONNECT_SYSTEM
the error details are
The installation was stopped, since an error occurred during the phase
CHECK_REQUIREMENTS, which the Add-On Installation Tool is unable to
resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
    -   Error in phase: CHECK_REQUIREMENTS
    -   Reason for error: TP_CANNOT_CONNECT_SYSTEM
    -   Return code:
    -   Error message: TP_INTERFACE_FAILURE
Notes on phase CHECK_REQUIREMENTS
n this phase the system checks the various requirements for the add
nstallation. The following are reasons why this phase may fail:
   TP_CANNOT_CONNECT_TO_SYSTEM: tp cannot log on to the system
   database.
   Check the action log (in the menu, choose Goto -> Action Log). Y
   may be able to use the detailed tp error message in this log to
   identify and remove the cause of the error.
   QUEUE_NOT_EMPTY: There are still OCS requests in the transport
   buffer which are not completed. You can show these requests with
   following tp command:
   tp SHOWBUFFER <SID> -DSOURCESYSTEMS= TAG=SPAM
   These requests have to be completed or deleted from the buffer
   before you can continue importing the queue.
o   CANNOT_DROPBUFFER: tp cannot delete old, incompletely processed
     Support Packages from the tp buffer.
     Check the action log (in the menu, choose Goto -> Action Log). You
     may be able to use the detailed tp error message in this log to
     identify and remove the cause of the error.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
please help me, its very important to complete this job i am in a critical position
Thanks
Senthil

Dear,
Please refer these links,
tp_cannot_connect_system
Problem loading a package in the SAINT transc. (TP_CANNOT_CONNECT_SYSTEM)
Regards,
R.Brahmankar

Error in Spam / saint update TP_STEP_FAILURE and DDIC_ACTIVATION

Dear All,
While updating spam/ saint update I am facing this error
Details of Error:
The installation was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
    -   Error in phase: DDIC_ACTIVATION
    -   Reason for error: TP_STEP_FAILURE
    -   Return code: 0008
    -   Error message: tp step A, return code
        0008
Notes on phase DDIC_ACTIVATION
In this phase the system activates the imported Data Dictionary objects.
This phase may terminate for several reasons:
o   TP_INTERFACE_FAILURE: The system was unable to call the tp
     interface.
o   TP_FAILURE: The system was unable to execute the tp program. For
     more information, see the SLOG or ALOG log file.
o   TP_STEP_FAILURE: The system was unable to perform the tp step DDIC
    activation successfully. To see the cause of the problem in the
    activation log, choose Logs.
    If you import two or more OCS packages in one installation queue,
    and activate the Data Dictionary objects in the incorrect sequence,
    this can cause errors. In this case, the activation errors disappear
    if you repeat the activation run. To do this, choose Continue.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Please help me
Thanks
Senthil

Hi,
i am having the same problem with SPAM
Error in phase: DDIC_ACTIVATION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPKA70012, tp step A, return code
0008
however i dont have the option to continue.. Please help
thanks

SUM - SPAM/SAINT 7.3 Update using SQL2012

Hi,
I installed a SAP NW BW 7.3 in Windows Server 2012 / SQL 2012 and I'm trying to update SPAM/SAINT via SUM, but this errors occurs:
1 ETQ359 RFC Login to: System="BWD", AsHost="atlas" Nr="00", GwHost="atlas", GwService="sapgw00"
2 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20140527175641
1 ETQ233 Calling function module "OCS_API_DELETE_QUEUE" by RFC
1EETQ235 Call of function module "OCS_API_DELETE_QUEUE" by RFC failed (error-status "3")
2EETQ360 RFC of "OCS_API_DELETE_QUEUE" failed:
2EETQ361 code/exception : 3
2EETQ362 key             : DBIF_RSQL_SQL_ERROR
2EETQ399 SQL error 515 while accessing table PAT05.
4 ETQ010 Date & Time: 20140527175641
1EETQ399 Last error code set is: RFC error system BWD nr 00 function 'OCS_API_DELETE_QUEUE' failed with code 3 key DBIF_RSQL_SQL_ERROR: SQL error 515 while accessing table PAT05.
1EETQ204 Upgrade phase "SPAMCHK_INI" aborted with severe errors ("20140527175641")
And generate these two short dumps:
1)
Category               ABAP Server Resource Shortage
Runtime Errors         DBIF_RSQL_SQL_ERROR
Except.                CX_SY_OPEN_SQL_DB
Date and Time          27.05.2014 18:32:53
Short text
     SQL error 515 while accessing table "PAT05".
What happened?
     Database error text: "Cannot insert the value NULL into column
      'DDIC_ACT_SUBSET', table 'BWD.bwd.PAT05'; column does not allow nulls. UPDATE
      fails."
2)
Category               ABAP Server Resource Shortage
Runtime Errors         DBIF_RSQL_SQL_ERROR
Except.                CX_SY_OPEN_SQL_DB
Date and Time          27.05.2014 18:45:59
Short text
     SQL error 515 while accessing table "PATHISTORY".
What happened?
     Database error text: "Cannot insert the value NULL into column 'DACT_SUBSET',
      table 'BWD.bwd.PATHISTORY'; column does not allow nulls. INSERT fails."
Can anyone help me?
I didn't find any SAP note, or documentation about this problem.
Thanks!
Marcello

Hi Reagan,
I read this note, but the solution is to re-install the application.
I will do this in last case.
Thanks!

SPAM/SAINT update error patch 23 - 640

Hi:
I´m recieving the following dump when updating SPAM/SAINT patch 23 under 640:
Syntax error in program "SAPLOCS_UI "
Error in ABAP application program.
The current ABAP program "SAPLSPAM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLOCS_UI ", the following syntax error occurred
in the Include "LOCS_UIU15 " in line 1:
"Function "OCS_DISPLAY_WITH_USER_BUTTON" not found in Function Library."
In program "SAPLOCS_UI ", the following syntax error occurred:
"Function "OCS_DISPLAY_WITH_USER_BUTTON" not found in Function Library."
Thanks a lot,
Armenta

Hii read modification adjustments in this document u will get a clear idea.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
Award points if useful

To reset SPAM/SAINT update

Hi!
I have started to update SPAM/SAINT (from 26 to 30).
The update is stopping in phase IMPORT_PROPER.
How can I sdelete this patch in tcode SPAM?
I would like to install new kernel patch firstly (from 133 to 159).
Thank you very much!
regards
Thomas G.

D'oh!

Importing a SPAM/SAINT Update

Hello,
I am trying to update SPAM/SAINT.
In Transaction SPAM, when I import SPAM/SAINT Update the package SAPKD70139 is proposed for the queue.
I need to import this one SAPKD70042, that already decompressed in EPS/in.
(Both are displaying in OCS overview)
Could anybody help me to find the way deleting a Not imported Package (SAPKD70139) in OCS Packages / SPAM ?
Many Thanks in advance
Latif

Issue is solved.
Regards

Problem updating spam/saint

Similar Messages

Maybe you are looking for