Problem updating the BIOS on Satellite A300

You update the BIOS in the laptop model A300-psagce after the update, the device to be subjected something.
Please help very necessary

Hey buddy,
Does this mean that now after the BIOS update you see only a black screen? Or can you access the BIOS or boot into safe mode?
If your notebook doesnt start anymore you should try this workaround: Remove the battery and AC/DC adaptor. Then wait one hour and connect both devices again. Now you can try to start the notebook again.
If it doesnt work you should go to an authorized service provider. Maybe the ROM module must be reflashed but this can only be done from an ASP.
Good luck!

Similar Messages

  • Updating the BIOS on Satellite A30

    Hi,
    I'm about to update the BIOS on my Toshiba Satellite A30 Laptop (Service Pack 3).
    I have downloaded the updated BIOS and have decided to update the BIOS from within Windows as recommended on the Toshiba website.
    On the website it mentions prior to upgrading the BIOS please ensure the following:
    Notebook PC BIOS update:
    Prior to upgrading the BIOS please ensure the following:
    - Notebook is undocked.
    - Notebook is connected to the mains.
    - Notebook must be in boot mode and not resume mode.
    - Remove any PC Cards.
    1. Windows based BIOS update:
    1. Extract the zip file containing the BIOS upgrade to a temporary folder.
    2. Make sure that all open files are saved and all applications are closed.
    3. Execute the extracted *.exe file in the temporary folder. Follow the instructions on the screen.
    4. The BIOS update will be done automatically.
    5. After a few minutes the Notebook will restart automatically.
    I'm not sure by what it means by Notebook must be in boot mode and not resume mode
    What is boot mode and how do I get my laptop in this mode?
    Can I not just run the downloaded file from my desktop?
    Thanks;

    Hi
    Boot mode means the notebooks should be powered off ;)
    Its simply off and ready to boot the OS when pressing the power button ;)
    But listen dude;
    This decryption belongs to the traditional BIOS update.
    You can find ONLY the win-based BIOS update on the Toshiba page.
    This BIOS can be updated only from running Windows OS.
    PS: BIOS update is not necessary if the notebook is running trouble free

  • Can't create the diskette for updating the BIOS on Satellite 1800-712

    I was given a Satellite 1800-712 with bugged BIOS (the power went down while reflashing) So now when the notebook is switched on a sign shows
    BIOS (Block2) is damaged! (Call your serviceman)
    and so on...
    I've downloaded the latest bios for the notebook, but when I try to follow the instructions given (unzip, insert a formated 1.44mb disk, start the *.exe file and a 1.44mb should be created) nothing happens. When I run the exe (chgbiosa.exe) if I'm running windows xp nothing happens, and if I'm running DOS says "Initial Error".
    In the Archive of the bios is a readme. It says that I should copy the files (BIOFC72T.COM and CHGBIOSA.EXE) to a 1.44mb floppy disk. Well it doesn't help either.
    Any ideas what should I do? Thanks in advance.

    Hi
    I found this thread in the forum:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19801&messageID=72625
    The case described in the thread above is very similar to your issue.
    According to this message every newer BIOS has a protection mechanism which means that even in case of an incomplete flashing procedure, the responsible area in the BIOS-flash for the upgrade is never deleted.
    So usually you should contact the service point in you country to solve this problem but maybe the description in the other thread will help you.
    But you know, everything what you do is at you own risk

  • Satellite A40: How to update the BIOS because I only have half of the Bios

    Hi guys
    i went to the local computer shop with my satellite A40 because i only have half of the bios !!!
    I sent an email to the german toshiba technical support and they said try a bios update (which baring in mind i still dont know how to do)then we sent my laptop to a local computer shop and told them the problem they told me not to update bios on a cempron processor.
    Why not? What are the risks in need to know.
    please help me because i want to in the future possibly upgrade to vista??

    Hello Daniel,
    Im a little bit confused about your message.
    What do you mean with only have half of the bios?
    Whats wrong with the BIOS?
    The Toshiba support said -> try a BIOS update.
    On the Toshiba page you can download the BIOS for the Satellite A40.
    It seems you didnt check the download page detailed because on this page you would find this instruction:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS&FID=TRO0000000b07
    The BIOS update was detailed described in this document and you should follow these guide lines to update the BIOS.
    bye

  • Win XP and updating the bios

    Wich is the correct procedure to update the bios of my mb (K8N diamond)?
    I have read the MSI information, but using Win Xp is not possibile to start the update from a boot floppy of win98. it can read the NTFS file system.
    Pad

    Quote from: tcsenter on 13-February-06, 14:19:49
    It is truly a mystery where this procedure originated from that uses a RAM drive for flashing a BIOS, given that DOS-based flash executables from AMI and Award have always required a pure DOS environment with NO MEMORY MANAGERS or other non-essential memory resident programs (and both BIOS companies continue to recommend this).  It seems to be a method advocated only here, for reasons I cannot explain, perhaps originating from someone's own personal preference.
    Physical RAM is much more vulnerable to power fluctuations and uncorrectable errors than modern fixed hard disks.  Only high-end servers running registered ECC modules can detect and track defective RAM right down to the individual RAM chip, marking it as unsafe for use to prevent access to the defective chip (ChipKill).  Hard disks can do this internally right down to the sector or block and have for years.  Of course, if the power is interrupted, neither is safe.
    Using a RAM drive is more complexity with absolutely zero advantage or benefit, and possibly will interfere with the flash process.  Flash utilities typically balk at the presence of memory managers and other non-approved memory resident code.
    Excellent fact/points. Up until several years ago, I only flashed from a floppy or directly from the drive. I've had a couple flashes go bad using a floppy, and whenever possible I would do it from the HD. When I'm faced with an NTFS formatted drive, then I'm forced to flash via floppy, until I had a disk go bad at some point after I had copied the files to the disk and possibly during the flash. I then saw this method using the RAM Drive here, and I've seen it on other forums such as PC perspective (formerly AMDMB) and a couple others I cannot recall. I don't know where it originated from either. I have several drives laying around, and I may consider abandoning that method, or at least using a CD, but I am not sure of that method, I would think it safer than a floppy in any case. I've been using the RAM Drive method ever since when I don't have a FAT partition available and haven't had a problem, but that only means I haven't done it enough times to experience the failure you speak of. I guess it's only a matter of time.

  • Nvidia monitor couldn be load after updates the bios 1.9...

    Halo....Have anyone used NVIDIA monitor?    I'm having a problem using that applications and prompt an error message after updating the BIOS V1.9.. Anyone has any opinion on it?
    Btw using Norton Ghost 9 and Raid0 which is better? Cos I wanted to knoe as I want to installed my other's PC which!!  

    K8N Neo2 isn't supposed to be supported by ntune (only nvfirewall and nvraid through ntune-lite) , so I would say it a good thing it blocks access
    considering the mishaps people have had in using it for tweaks .
    http://www.nvidia.com/object/motherboards.html

  • MSI H61M-P21 (B3) - Won't start, how can I update the BIOS?

    Hello Everyone!
    I just bought an MSI H61M-P21 (B3) Motherboard along with Intel Celeron G530 Sandy Bridge (2.4 GHz) and 1 DIMM of 4GB DDR3 1600 KingMax. I use NJOY 500W true power as power supply. The system starts but no image, no beep code, nothing... Testet with another DIMM of RAM (4GB DDR3 1333 KingMax), but no luck. Tested with another power supply (450w true power), no luck again. I have tested the motherboard out of case, put on an antistatic surface, no luck... Reset CMOS, same situation: no image, no beepcodes...  On the Main BIOS Chip of the motherboard is a little sticker on which is written "E7680IMSH30" - i guess that the motherboard comes 'shipped' with 7680vH3 BIOS.
    Is there a possibility to update the bios without replacing the CPU or send the board to RMA? I'm almost sure that the problem is around here...
    Thanks in advance! Any answer is welcome!
    P.S.: I appologise for my bad english.

    Good morning.
    I've tested the motherboard this weekend with another DIMM of 4GB DDR3 1333, ThermalTake PSU (500W, i don't remember the model) and Core i3-2120 CPU - those components were taken from another IDENTICAL motherboard H61M-P21 (B3) with same version of BIOS. Didn't worked... I have tested my Celeron CPU G530 on the functional H61M-P21 (B3) and it's working...
    So, there is a problem with my mainboard, i will send it to warranty.
    Thanks a lot. Have a nice day!

  • CAN'T UPDATE THE BIOS!!

    I have a Z60m and i would like to update my bios from version 1.12 to the latest. I downloaded the utility on the website, it says that my laptop should shut down and the restart in update mode but all i see is a regular restart of my laptop and no bios update.
    Did anyone had this problem?

    You probably need to update the embedded controller to a version that the new BIOS can work with, check the information offered on the download site.
    Now, before you ask; I know it says that if you need to update both BIOS and embedded controller you should update the BIOS first, it says the exact opposite on the embedded controller download site - confusing
    Just choose your updates and versions carefully.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • GE60 0ND-412XTR - I can't update the BIOS

    Hi guys.
    I'am living Istanbul, Turkey. And I know very little English.
    If the My problem is not being able to update the BIOS on my laptop.
    I did the following steps one by one.
    m-s-i-.-c-o-m-/files/pdf/Win8_UEFI_BIOS_Update_auto_en.pdf
    Therefore, I can not update the BIOS.
    What to do?
    Thank you.
    SYSTEM FEATURES
    MSI GE60 0ND-412TR
    Core i7-3630QM
    8GB 750GB
    GTX660M 2GB
    15.6" Full HD
    FreeDos
    MY UPGRADES
    120GB Kingston mSATA
    Installed: Windows 8 Prox64
    IN ADDITION TO
    Although SSD drive installed takes about 40 seconds to see the Windows logo.
    AND THE BIOS SCREEN
    i-.-i-m-g-u-r-.-c-o-m-/6TN2bLF.jpg

    Quote from: Essometer on 01-July-13, 05:05:50
    So you can´t update an GE60 with freedos to UEFI, is that right?
    I have Windows 8 on my GE60 freedos und the problem that my GPU won´t boost.
    Will this bug be fixed anytime soon?
    You cannot update the GE60 that came with FreeDOS to UEFI, correct.
    The GE60 does not have a GPU boost function like other models do. It does have a built in GPU boost that is regulated by the GPU, and this was fixed with a recent firmware update (roughly 3 or 4 months ago). You should update to the latest FreeDOS/Win7 bios if you have not yet.

  • How to recover Bios on Satellite A300

    How to recover bios on satellite A300 laptop?

    > Somebody told me that the bios must have infected and asked me to rewright the bios.
    So this someone hasn't got much savvy.
    Sorry mate but this issue has nothing to do with BIOS. BIOS is saved on the ROM module the virus cannot affect the ROM module since it needs to be flashed and I dont think that this a case on your notebook.
    You just deleted something in registry?? Im afraid this is not enough to get rid of a virus
    The best solution is to format the HDD and to reinstall the system once again
    Use the recovery disk because the recover would delete all partitions and would reinstall the system, drivers and tools again

  • Updating the BIOS: is it worth? And how to?

    Hello everyone.
    I have an Hp Envy dv-6 -7280sl
    I formatted it, and installed Windows 7 64bit and Ubuntu 13.10 in dual boot.
    Some days ago the notebook didn't let me enter in Windows 7 partition, giving me a 0xc00000e9 error. When I ran the Long DST test, it failed.
    I managed to format the Windows 7 partition, and installed it once again. Now it's properly working,  and the Long DST test is passing. But If I insert a Windows 7 64bit repair disk, it still gives me the 0xc00000e9 error.
    What can I do? Do I need to update the bios? Is it worth?
    And how can I do it, since the HP page want me to select "Windows 8"?

    Askaron wrote:
    Hello everyone.
    I have an Hp Envy dv-6 -7280sl
    I formatted it, and installed Windows 7 64bit and Ubuntu 13.10 in dual boot.
    Some days ago the notebook didn't let me enter in Windows 7 partition, giving me a 0xc00000e9 error. When I ran the Long DST test, it failed.
    I managed to format the Windows 7 partition, and installed it once again. Now it's properly working,  and the Long DST test is passing. But If I insert a Windows 7 64bit repair disk, it still gives me the 0xc00000e9 error.
    What can I do? Do I need to update the bios? Is it worth?
    And how can I do it, since the HP page want me to select "Windows 8"?
    BIOS update is always a good thing to do if needed but in your case first needs to solve the error problem your having when you use the repair disk. And then if you want to check on the HP driver support with your product number and see if there was BIOS update to your system. But when doing BIOS update make sure your batter is working order and power is good causing having a filed BIOS update is not a good thing to have. But in my experiences of flashing the BIOS unless something forbids happens updating a bios is something you should read the instructions and do it when your not using the computer for anything else. But generally if you do it carefully and not rush BIOS updating is should work fine just make sure to get the right BIOS that matching our product number. Also to your two paritions is there a reason why you need Ubuntu? I would think Windows would more then suffice and the problem might coming from the Unbuntu partitions when the repair disk does a scan. Put this way wipe the total hard drive clean partitions and make just one system Windows 7 and if any errors appears then you can tell if it is software based or hard drive based problems.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Tecra S5 - Is it worth to update the BIOS?

    I bought a Tecra S5 notebook recently and yesterday I noticed an update of the BIOS in the Toshiba website.
    I googled alot and also searched this forum and found a lot of threads about people having problems after updating (flashing) their BIOS. So I want to ask if the update is worth it, and if somebody owning a S5 has done it. Also could somebody tell me if there is a way to ensure you can roll back previous BIOS version after an update goes wrong?
    The notebook is precious to me and since living in this financial crisis time means I won't be able to buy a new one if I screw this up I want to be sure. Thanks in advance.
    EDIT: Forgot to mention that I installed Vista 64 due to having 4 GB of RAM.

    Hello
    First of all a BIOS update is not necessary if your notebooks runs smoothly. Never touch a running system ;)
    A BIOS update is only advisable if you have problem with it, for example not properly recognized RAM modules or so.
    I only update the BIOS of my notebook if I have problems with it and that means I updated the BIOS on my Toshiba notebooks 3 times as yet. Im not a Tecra S5 owner but I never had a problem with the BIOS updates. Some people who reported that the BIOS update failed did forget to read some instructions how to do that:
    Before you start a BIOS update you should close all running programs and close all background processes that you dont need. Also your antivirus and firewall should be disabled and must be logged in as administrator. Dont forget to connect the AC/DC adaptor before you start it.
    If you follow these tips normally the BIOS update should be done successfully.
    A BIOS downgrade to an older version can only be done from anuthroized service provider. That means you can downgrade it yourself.
    But newer versions are pretested from Toshiba and should not cause more problems as before. Newer BIOS versions fix problems.
    I hope I could help you a little bit! :)
    Greets

  • How can I update the BIOS without using a CD?

    Hello!
    I have recently decided to upgrade my RAM from 2GB to 4GB. After installing, I booted up my computer to find that it would not recognize the new memory. After doing a bit of troubleshooting, I decided to try and update the BIOS, as the version was from 2010. I downloaded the BIOS update boot CD application from lenovo, burned a disc, and on reboot I found that the boot order did not have CD listed on it. Here's the catch: I don't have the supervisor password. This is a hand-me-down laptop, and I have tried to find the password to no avail. This is the current boot order: USB drive, Hard drive. 
    My question is, can I either create a BIOS update disc using a USB, or update the BIOS some other way?
    I understand that it is impossible to recover the supervisor password without having it serviced (which I would rather not do, even if I have to send my RAM back to Crucial)
    My system specs:
    Thinkpad L512
    Bios version: 1.04
    Bios date: 2010-3-26
    Embeded Controller Version: 1.01
    Windows 7 32 bit
    Thanks for your help.
    Solved!
    Go to Solution.

    Welcome to the forum!
    Two things here:
    a) If you run System Update, it should offer the latest BIOS for your machine as well. I've never done it on a passworded unit, so it might or might not work but might be worth a shot.
    b) I doubt that the ability of the system to recognize new RAM has anything to do with the BIOS. ThinkPads much older than yours will run 4-8GB RAM with an old BIOS, older than your machine to begin with.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Problems updating the BAM database

    Hi Guys,
    I have an activity that runs for a long time and after executing for about 15-16 mins it causes the following exception.
    Did somebody else also faced this problem ever? I have tried configuring all possible timeout parameters but all in vain.
    Any help would be highly appreciated.
    Thanks,
    MK
    EXCEPTION DETAILS
    Problems updating the BAM database. Reason:Unable to connect to the database.
    Caused by: A lock could not be obtained within the time requested
    fuego.analyzer.UpdaterRuntimeException: Unable to connect to the database.
         at fuego.analyzer.UpdaterRuntimeException.cannotConnecToDatabase(UpdaterRuntimeException.java:80)
         at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:494)
         at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:273)
         at fuego.analyzer.UpdaterRunner.runUpdater(UpdaterRunner.java:176)
         at fuego.server.service.BAMRunnerService.runUpdater(BAMRunnerService.java:62)
         at fuego.server.execution.BAMUpdater.execute(BAMUpdater.java:33)
         at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:290)
         at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:465)
         at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:543)
         at fuego.transaction.TransactionAction.start(TransactionAction.java:216)
         at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:116)
         at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:56)
         at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
         at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:265)
         at fuego.server.execution.ToDoItem.run(ToDoItem.java:536)
         at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:752)
         at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:732)
         at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:138)
         at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:130)
         at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:429)
         at fuego.component.ExecutionThread.work(ExecutionThread.java:816)
         at fuego.component.ExecutionThread.run(ExecutionThread.java:395)
    Caused by: SQL Exception: A lock could not be obtained within the time requested
         at com.ibm.db2cs.m.j.generateCsSQLException(Unknown Source)
         at com.ibm.db2cs.m.b.wrapInSQLException(Unknown Source)
         at com.ibm.db2cs.m.b.handleException(Unknown Source)
         at com.ibm.db2cs.m.d.handleException(Unknown Source)
         at com.ibm.db2cs.m.t.handleException(Unknown Source)
         at com.ibm.db2cs.m.s.closeOnTransactionError(Unknown Source)
         at com.ibm.db2cs.m.s.movePosition(Unknown Source)
         at com.ibm.db2cs.m.s.next(Unknown Source)
         at fuego.jdbc.FaultTolerantResultSet.next(FaultTolerantResultSet.java:553)
         at fuego.analyzer.Updater.loadInstanceInfoValues(Updater.java:1039)
         at fuego.analyzer.Updater.loadInstanceInfoValues(Updater.java:988)
         at fuego.analyzer.Updater.loadInstanceInfo(Updater.java:982)
         at fuego.analyzer.Updater.synchronize(Updater.java:252)
         at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:480)
         ... 20 more

    Good morning justinmm357,
    I would be more than happy to help delink the secondary email address from your My Best Buy™ account.  Please send me a private message with the information below, by clicking on the blue button in my signature, and I will make sure that everything is up-to-date.
    Name
    Phone #
    Mailing address
    Email address (primary and secondary)
    Thank you for reaching out to us on the forum and for being a My Best Buy™ member!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • I have a problem updating the new ipod touch 5th generation

    I have a problem updating the new ipod touch 5th generation and I need help:
    With each attempt I receive the message:
    iTunes has detected an iPod in recovery mode.  You must restore this iPod before it can be used with iTunes.
    The iPod only displays a USB cable with an arrow pointing to an iTunes logo.
    I receive a "Are you sure..." message with the 2 options, one to Restore and Update and the other to Cancel.
    Each time I have selected the Restore and Update button and then moved through the acceptance screens.  Then iTunes begins to download the iOS 6.0.1 Software Update, which usually takes about 50 minutes.  During the download I will receive messages that an iPod has been found in restore mode.
    After the download is complete no update occurs to the iPod and iTunes displays the Device Summary screen showing derive Name as iPod and all other items as n/a.
    The iPod was working great without any known issues prior to attempting to update the OS.

    Maybe:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

Maybe you are looking for