Problem updating with gnome-mount & gnome-disk-utility?

I've been getting this when I try to "pacman -Syu" for the last week or so:
Replace gnome-mount with extra/gnome-disk-utility? [Y/n]
When I say yes I get:
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-rt: requires nvidia-utils=185.18.36
Any ideas what I can do to make this go away?

loafer wrote:Which version of nvidia-rt do you have? Try upgrading to the latest one in the AUR as that depends on nvidia-utils=190.42.
Thanks loafer. I removed the nvidia-rt (I think I got it from archaudio) and installed the nvidia-beta-all package and everything upgraded just fine.

Similar Messages

Internal hard drive does not mount in disk utility

My internal hard drive no longer mounts in Disk Utility. It is grayed out. I have extraordinarily frequent spinning beach ball/freezes, in Safari or Apple Mail. The most recent symptom: upon rebooting or just starting up, I see flashing black on the display. This has been occuring for more than six months. Of course, I have made total and frequent backup's. I bought new RAM, but have not yet installed it, and I susect this might help. I have done repeted troubleshooting many times each: Apple's Disk Doctor, Repaired Permissions, Reinstalled the Mac OS, safe boot, Alsoft's Disk Warrior, Apple's longer Harware Test, etc. I have worked as a new user, too. All tests done report that all is well. What od you thnk the problem is? Must I drive 1.5 hrs. each way to the Genius Bar at my nearest Apple Store? Might I try to erase the hard drive as a fix? I hate to do this, only as a last resort, as it is so time-consuming. Should I just update my Mac OS? Please advise, out there, if anyone can offer any advice, I would be greatly appreciative.

The list of issues you posted probably would not get shorter if you attempt to 'upgrade them' away, as usually that kind of effort is not effective yet may expose more of the same problems while not necessarily revealing the original weakness. Another OS X installed over a set of problems seldom helps.
How full is the hard disk drive? If it is too full, or has been very busy in use several years, it may be time to replace the HDD and perhaps put a larger capacity one in the computer. And if the main computer hardware checks out OK (tested under a variety of duration and stress tests) then also consider a RAM upgrade if the device is not already at the maximum capacity.
When was the last time the hard disk drive was devoid of content, maybe wiped -- erased and reformatted by a third party disk utility or have a utility overwrite the entire HDD with zeros? This used to be a common tech service in the course of a major effort to restore a Mac. Or Defragment?
If you can do the latter, this could help resolve bad sectors and remove old data or corruption on the hard drive. Or get a new HDD and before committing a new OS X install & apps to it (or a re-clone of a complete backup) test the drive and be sure it is ready for use. Not all new drives are perfectly ready; some need to get exercise first.
I'd bet on a new hard disk drive of larger capacity (also note spin RPM rate and data speeds) and a full RAM upgrade.
If you have a backup clone on an external hard disk drive (in a boot-capable enclosure) you could really go to town and before you erase the main/only hard drive, make a backup clone and test its ability to boot the Mac. Or put the old drive and content in a suitable boot capable enclosure of the kind with its own power supply, and deal with it later.
Then consider a later version OS X -- whatever most recent version that model can support... {edited}
Good luck & happy computing!

Missing menu "File|NFS Mounts" in Disk utility

I had many NFS mounts using Disk utility and I used "File|NFS Mounts" but now that option is missing and I can't see my mounts neither those mounts are working, so I have two questions
1. Where I can see my old mounts listed?
2. How can I make nfs mount work?

The problem is Boot Camp: It uses a hybrid GPT/MBR partitioning scheme - which ends up hiding the Recovery HD partition - which is an EFI physical partition (neither GPT nor MBR).
I would expect a new version of Boot Camp to release - like real soon - because of the Recovery HD partition invisibility issue.
In this article - it is suggested that rEFIt should be used to partition a hard drive that is going to support multiple boots including Mac OS X, LINUX, and Windows.
(http://wiki.onmac.net/index.php/Triple_Boot_via_BootCamp)
The key in the article to using Boot Camp with rEFIt is this:
"Run the Boot Camp Assistant and create the Windows XP driver cd. Then exit Boot Camp. DO NOT PARTITION USING BOOT CAMP: you are only using Boot Camp for the drivers, not the partitioning."
All partitioning is done in terminal mode using the "diskutil" command.
rEFIt is used to update both the GPT and MBR records so that all partitions will be visible using its "gptsync" command.
Then - you replace the standard Mac boot menu with the rEFIt boot menu. THAT will show the Mac OS X partition, Recovery HD (an EFI partition), and the Windows partition.
My caveat is that rEFIt - which is open sourced and available here: http://refit.sourceforge.net
has not been recently updated and tested with respect to Mac OS X Lion.
Hope this helps!

Mac OS 10.5.6 downloaded Firefox 3.6.13 Came as .dmg When I try to launch it says "Not Recognized". Right click for "Open With" refers me to Disk Utility when same results "Not Recognized"

About my Mac > G5 Desktop OS 10.5.6
Want to upgrade to Firefox 3.6.13
The download comes as a compressed file in .dmg format. When I attempt to launch the .dmg file to decompress I get a error message that says: The following disk images failed to mount: Image > Firefox 3.6.13 Reason > Not Recognized. When I right click to see what opening app it is directed to it says: Open with "DiskImageMounter (default). Disk Utility is offered as another opening resource when I direct the file to Disk Utility and go to Menu Bar select "File" then select "Open Disk Image" (or Cmd + "O") I get the same result. Have tried downloading the file twice more and get the same results

Vk2mh it sounds like the download was not complete or corrupted. Where are you downloading the update from? Have you tried downloading again?

Can I fix a disk with this message?-Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

Can I fix a disk with this message?
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

Some problems can indeed be fixed this way. But working from Recovery_HD or Disk Warrior DVDs and working in the restricted environment those provide can be difficult. You can literally spend days working on this problem (while your regular work is unavailable) only to discover the old drive is unsalvageable.
There is no way to know up front whether you are facing a major Hardware failure or a minor software glitch, or something in between. Often you are forced to work from the drive you no longer trust. I continue to recommend you do this work from a different, fully functioning Mac OS X booted from a different drive.
If you have had the foresight to (as The hatter often recommends) clone your virgin install onto another drive for use in such situations, you will be able to recover from such problems in record time. If not, my previous recommendations stands:
Buy a new Drive. Or two. Install Mac OS X from scratch on a new drive, and get your Mac running again. Later, you can use the full power of Mac OS X to attempt to rescue your data, if needed. Then Zero the old drive, to see if it can hold data again reliably.
If the old drive eventually provides some needed data, and is salvageable, Merry Christmas.

Internal hard drive fails to mount in Disk Utility.

My internal hard drive fails to mount in Disk Utility for the past year, so I cannot verify it. However, it does mount in Disk Warrior. (1) I am concerned that it will not mount within the Apple software, and what that bodes for my computer. (2) I also have MANY spinning beach balls daily and have to use the power button to reboot. I just bought extra Crucial RAM and have yet to install it. Somehow, I don't think it wil help my issue # 1 though. Please advise, anyone out there! Thank you.

No, there are never any errors like that. Also, I have upgraded the Mac OS from 10.5 to 10.6.8. That did nothing. I backed up my Users = Christina folders to a good, 15 year old Firewire 800 La Cie 1 TB external hard drive. I also tested using the Apple Hardware test, which showed no problems, and Alsoft's Disk Warrior and defragged, and fixed a very minor issure re directory count, probably resulting from many improper shutdowns lately due to frozen spinning beach balls. None of these procedures alleviated the issues, and I still have the same issues: mainly that super-frequent spinning beach ball. Do you think I ought to install that new RAM sitting here finally? Perhaps it is a lack of RAM??I only have 2 lousy GB's of RAM after all! Thank you so very much for a reply.
Message was edited by: Flamingcreatures

"/" symbol where my disk should be mounted in disk utility.

I have a "/" symbol where my disk should be mounted in disk utility. I was just wondering if this is normal. I feel like it used to be a bunch of numbers and letters (probably saying where my disk was mounted). I have been having a bunch of hardware and CPU issues and maybe this could be why?

diskutil list:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            499.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *16.1 MB    disk1
   1:        Apple_partition_map                         32.3 KB    disk1s1
   2:                  Apple_HFS Flash Player            16.1 MB    disk1s2
Diskutil cs
No CoreStorage logical volume groups found
Mount:
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)

My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?

My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?

See mount section in 1st linked article.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

Problem with External HD and Disk Utility

Hi. I'm using OS X Yosemite 10.10.3 on a 15 inch MBP Retina. I've been using my 2TB WD My Passport Ultra hard drive since around February of this year. Earlier today when I plugged it in, the hard drive didn't show up in my devices in finder. So, i unplugged and tried again. Still nothing. Then, I went to Disk Utility and found that the drive was there but the partition wasn't mounted and is greyed out. So i tried to verify / repair the disk but have gotten a couple different messages. One being "The partition map needs to be repaired because there's a problem with the EFI system partition's file system. The other being "Some information was unavailable during an internal lookup". This message has showed up more than any other. I've been able to get in and look at my files once to try to copy the files from the drive after a message popped up and said it "couldn't repair the disk" but i "could still open or copy files on the disk but can't save changes to files on the disk." But I encountered an error that was something along the lines of "Operation couldn't be completed because the item "..." is in use". But the file i was trying to copy wasn't open or in use by any program. SO, I'm in pretty desperate need of some help with this. I have some very important files on this drive that I can't afford to lose. A lot of it irreplaceable. Any help at all would be very much appreciated! Thanks a lot!

I recall that the old imacs could not use a HD over 130G or so unless they are partitioned. So you may need to make three partitions first with your disk utilities. It should format it at the same time.

Problem with "Prohibited name". Disk Utility can't repair the disk!

Hello,
Sorry if my english is not perfect, but I do my best!
I have a problem with almost all applications. When I quit an application, it appear the crashed window. I can submit to Apple support the report, but I don't because there is too much.
I start on a cd-rom and lauch Disk utility. It can't repair the disk because of two "prohibited name" lines in red. No more information!
What are the two "prohibited name"? File? Folder?
How to repair the disk?
Any idea?
Please, help me.
Thank.

Bienvenue To  Discussions GMDC!
Exactly which model Mac G5 is it?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
What peripherals do you have connected? A keyboard, mouse, printer, external drive or modem, router, etc?
What happened between the last time the Mac functioned successfully, and when it didn't?
Have you made any changes, like upgrading the system, updated or installed any applications or programs, etc?
Have there been any unusual occurences, like freezes, crashes, power outages, etc?
See if you are able to perform the procedures posted below, and post the results.
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
8.When finished, select Quit Disk Utility from the Installer menu.
9.Select Quit Installer from the Installer menu.
10.In the resulting pop-up window, choose restart.
11.After the computer has restarted, you can eject the CD.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
When "Repair Permissions" is complete. Quit "Disk Utility".
ali b

Problem with External HDD and Disk Utility

I'm having issues with my external hdd, I keep all of my media on it, and randomly it is no longer readable, and doesn't show up on the desktop, it only gives me the options to initialize, ignore or eject, when I try to initialize it and run first aid, all of the options are greyed-out and I cannot click on them. The only option in Disk Utility that I can do is erase. Is there anyway to fix the hdd so I can continue to read and write to the device, I really don't want to lose over 600 gigs of photo's, videos and music.

Since it sounds like the disk is on the way out, I would suggest that you back it up preferably twice.
Once you have your data backed up then and only then you can start troubleshooting the problem.
What model Mac do you have?
How is the disk connect to your Mac?
Does the disk have another type of connector?
|___________________
Allan

Problem with external harddrive and disk utility

I have just about ran out of room on my iMac G3 so I went to walmart and bought a FreeAgent 320 GB external hard drive. On the bottom it says its compatible with my iMac G3 you just have to format it using disk utility.
So I open up disk utility and I see my hard drive. I click on it and then go to erase so I can format it to work on my mac. However everything on the erase page of disk utility is greyed out and and I can't click on anything.
What do I do? Thanks.

I recall that the old imacs could not use a HD over 130G or so unless they are partitioned. So you may need to make three partitions first with your disk utilities. It should format it at the same time.

Disk Images will not mount and Disk Utility will not runru

I am having some major problems with Disk Utility, Disk Images, and software update. First, Disk utility will not open or run. When I double-click the application icon, nothing happens, no message, nothing. I am running OSX 10.4.11. I have deleted diskutility prefs. I am able to run Disk Utility from the Startup DVD of Tiger. On first run, it verified and repaired permissions. I run verify and repair permissions several more times from Startup DVD and everything is fine. But Disk Utility on my startup HD will not work. Similary, NONE of my disk images will mount. No matter what Disk Image i try to mount, nothing will. And I cannot use Disk utility to mount them! So, no matter what I download, no images will mount. And thirdly, when I try to run software update, it will not work. I do get a message: it says, "Could not load Software Update." Finally, i tried to download Onyx to delete log files, etc.. but again, the disk image will not mount. I was able to install a dashboard widget called "maintidget" and was successful in running the daily, weekly, and monthly maintenance tasks. Can anyone help? Everything else works fine!!! All apps! Safari, Mail, iTunes, MS Office, everything works fine. Thanks for ANY help!

Previously, I had run verify permissions, repair permissions multiple times(from startup DVD) - no probems found. Deleted disk utility prefs. Run the maintenance taskes (daily, weekly, monthly). Nothing worked. But, I forget to check the drive for problems. So I ran disk scan. It found "invalid node" and repair disk could not do it. So, do I erase and do a fresh install or get DiskWarrior? I am running Leopard so I do not have Time Machine but I have backed up my documents, iTunes Library, iPhoto Library, etc... Another thing I found out the hardway is to sync all your bookmarks, mail settings and messages, etc... with .mac if you have an account. Any more suggetions?

Encrypted drive will not accept password when re-mounting via Disk Utility

I have used the 'whole disk encryption' on one of my external HDDs. Sometimes i eject the drive when i don't need it because it's in a 4bay housing along with 3 other drives. I do this because OSX wakes up all my drives even for mundane tasks like safari browsing or even looking for a dictionary definition. But anyway, my problem is if i want to re-mount that encrypted drive from disk utility (left mouse click on greyed out drive and re-mount) it does not accept my password. I get the little shake like i typed it in incorrectly. Anyway, i tried it like a dozen times and received a dozen shakes of negativity.
If i swith off the drive unit and swith back on again the password is accepted just fine..
Can anyone else test this so i can mark it up as a Lion bug? Or is there something else i need to try?
Thanks
Si

Hi MacNewb1022,
Welcome to Apple Support Communities.
The article linked below has some great troubleshooting tips that should help you resolve the slot-loading SuperDrive issue that you described.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Cheers!
-Jason

Disk image mounting and disk utility oddities on Xserve running OS X Server

I continue to run into an odd problem on one of my server setups. It is a 1.33 GHZ Xserve running OS X Server 10.4.11. There are four ATA drive installed (two of which are mirrored using Softraid 3.6.6). There are a total of 6 Firewire drives on the Firewire 800 Bus. Three of those are used for sharing out files and the other three are for various backups.
What happens is that I sometimes run into an issue where dmg files will not mount. There are no error messages and nothing in the log, they just don't open. Likewise I am unable to launch Disk Utility, it just spins and spins never displaying the drives, again nothing in the logs, no crashreporter. I have also found out that the same thing happens in System Profiler when I try to get a list of drives on either the ATA bus or the Firewire bus. Mind you they all show up on the desktop. Likewise I have had no luck getting them to list or run permissions or the like from the diskutil commandline. Now I am able to mount actual drives. When I swap out the offsite backup drive it mounts the new drive just fine. However... when I eject the drive and it has disappeared from the desktop and then I remove it... I get the removal error.. you didn't put the drive away properly message.
Now there are no disk related events showing up anywhere in the logs. The only other oddity that I can see is that my rsync backups tend to generate a ton of zombie processes. I get zombies of cron, sh, rsync, and mail.
It is just a pretty straightforward shell script
/usr/local/bin/rsync -E --archive -eahfs --delete /Volumes/Files/Shared\ Items/ /Volumes/Backup\ Files/Shared\ Items/
Running in cron with it set to email the logs.
Now this does all clear up when I reboot the server... but it also doesn't reboot cleanly. It closes down all of the applications, login window and the like and then hangs on the shut down portion. Eventually I have to power it off manually. I've done the normal Volume checking on the main drives and they come up with 0 errors.
Hoping someone might have some ideas before I end up having to backup and reinstall the whole thing.

Also when I try to open the disk image file I get the following error in the log.
xserve kernel[0]: disk10s10: media is not present.

Problem updating with gnome-mount & gnome-disk-utility?

Similar Messages

Maybe you are looking for