Problem upgrade my 5230 to firmware to v40

I have a 5230 and I think the latest firmware is v40 but Ovi Suite and Nokia Updater both think my 5230 with firmware v20 has the latest firmware. How can I upgrade mine to v40? thanks

You may try at the Local Nokia Care..
BTW the version must be available in the USA as per this Nokia USA Site..
http://www.nokiausa.com/get-support-and-software/software/device-software-update
..but the conditions as mentioned earlier must satisfy...

Similar Messages

Upgrading nokia 5230 to Firmware 2.0?

I recently got a new Nokia phone! It has the firmware for v.12.8.095 When I run the Nokia Software updater it tells me that my firmware is up to date. How can I upgrade to v 2.0?

It simply means the update is not available for your phone's particular product code.
Reasons why a phone cannot update:
1. It is a country variant - country variants often get the updates later, or have updates skipped altogether. A Turkish country variant product code for example, skipped v40 and updated from v31 straight to v50.
2. It is network branded - phones acquired from network providers or these providers' stores SIM free are branded, and will not get updates until the networks approve and modify the updates to their liking.
3. Special editions - These special editions are chartered editions and may never get updates unless taken to a Nokia Care center.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Problems upgrading from OS 8.1 to OS 9.2.2

Thank you for any help you can give me.
I have some additional problems upgrading from OS 8.1 to OS 9.2.2.
1. The keyboard is typing symbols, not normal letters. When I go to Key Caps it shows symbols and not normal letters. When I was running OS 8.1 the keyboard typed fine.
2. I also am have trouble with windows closing as I open new windows. Everytime I click to open a new folder the old folder closes.
3. Copying files. When I drag a file it makes a new copy on the desktop.
How did I goof up going from OS 8.1 directly to OS 9.2.2?
All these problems were fine while running under OS 8.1.
I believe this computer came with OS.8.6 installed on it but I got it with OS 8.1.
Any help you can pass on to me would be greatly appreciated.
I am typing this on my Dell PC.
Thanks a million,
Jim
iMac G3 333 Mac OS 9.2.x

Easy, I just insert my OS 8.1 System Software into the tray loading CD and choose it as the start up disk in the control panel. I restart the computer and it is running off of OS 8.1 instead on OS 9.2.2. I looked for another keyboard today at a used computer store but they didn't have one for the iMac. I need to find one as all my research indicates that it is somehow connected to the option key. But then again everything works fine under OS 8.1. Quite a puzzle to me. Again thanks for the page tip on Firmware. Jim - PS, I did pick up a zip drive that connects to USB ports.
iMac G3 333 Mac OS 9.2.x

ZEN MICRO problems..reverting to old firmware possib

Hi,
I just upgraded to the new firmware .0.03 (since I don't have Windows XP to install the 2.00 version)...and i'm noticing a lot of freezing problems....
Is there a way to go back to the original firmware that was initially installed? ThanksMessage Edited by Tiger23 on 0-09-2005 0:0 AM

sigh.. I've tried that and it doesn't work....still freezes at the creative screen.... I suspect it may be a hardware problem since when it freezes at start up, there is no hard dri've sound. Before, when it was working well, you would hear little hard dri've sounds at start up....but whenever it freezes at start up, there is no hard dri've sound so it's kind of like the hard dri've is loose? So i tried tapping the zen micro, and after many many tries...it started up again, but then after a few songs, it froze......
I tried recover disk clean up, but when I select that...it freezes as well....it freezes at the "scanning disk..." screen of disk clean up..... I know something is wrong since I've tried disk cleanup when the player worked and it would be fast and would say "scanning disk.....25%....etc.....now i don't even see the progress percentage........
I'm calling support on monday..........anyone know how to fix my problem? Will RMA cost me a lot of money? I went broke after buy the zen micro....sigh..............

Problem Upgrading to Apex 3.1 on XE

I am running into a problem upgrading Apex to 3.1 on Oracle XE.
Hardware and Software:
Database: Oracle Database 10g Express Edition Release 10.2.0.1.0
PL/SQL Web Toolkit Version: 10.1.2.0.4
Host O/S: MS Windows XP Professional Version 2002 SP2
Host Hardware: AMD Athlon 64 Processor, 2.2 GHz, 1.87 GB RAM
Background:
This is a lab host. I am working through the full installation process so that I can set up XE and Apex on development and production hosts, the end in mind being to develop a simple application using XE/Apex instead of Access 2003, which is used heavily in this shop.
It seems to me that upgrading to Apex 3.1 would be a good thing to do up front instead of developing in the version which ships with XE (2.1, I believe) and performing the upgrade later.
I installed XE going with full defaults. Nothing at all tricky. I was able to connect to http://localhost:8080/apex without any trouble and log in as system.
I then followed these Apex upgrade instructions, very carefully:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
After I ran into trouble (see below), I reviewed this post and used it to double-check my work:
How to upgrade to Apex 3.1
I have worked through this a number of times, each time ending up with the same error.
The Problem...
After the upgrade, when I navigate to http://localhost:8080/apex, I receive the following error:
wwv_flow.app_not_found_footer_err
wwv_flow.err wwv_flow.app_not_found_err
OK
I reviewed this posting, which suggests that I upgrade my PL/SQL Web Toolkit:
apex 3.0 error wwv_flow.app_not_found_footer_err after new installation
I am perfectly willing to try this, but I am not sure how to obtain the latest correct version of the web toolkit for this particular version of the database. Any tips on where I might find this?
I also note that the posting says there should be 10 SQL files in the apex/builder directory. I only have 5, but I just downloaded this zip file a few days ago and assume this is the correct number of files. If it isn't, where could I find the correct zip?
Any other suggestions about the root cause of this issue would be appreciated.
Thanks!

Well, like Sherlock Holmes said, "when you have elminated the impossible, whatever remains, no matter how improbable, must be the truth." Or, something like that.
Thanks Joel, it was the files. I examined the zip file I originally downloaded and, sure enough, there were 10 files. I extracted it again and, for some reason, this time it only pulled one of the SQL files out, not even five as it did the first time. In addition, it also skipped about half the language folders.
To get it work, I used the windows built-in zip to open the file, navigated to the apex/builder folder, selected all of the SQL files and language folders, then copied and pasted them into c:\apex\builder.
I then restored the database, ran the install again, and everything worked just fine: I can access http://localhost:8080/apex/apex_admin and log in.
I'm not sure what the issue is, a problem with the zip file or (ok, more likely) a problem with the built-in windows zip tool. I used 7-zip (www.7-zip.org) to extract the file on my workstation and all 10 files and 9 language folders came out just fine.
The bottom line is, it works now, thanks again for the help.
-Tom
PS - I did not install the web toolkit upgrade.

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Problem upgrading [SOLVED]

I-ve a problem upgrading with my Arch 64. I've the next problem while upgrading...
4:01# pacman -Syu /home/koven
:: Synchronising package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
warning: ruby: forcing upgrade to version 1.8.7_p72-1
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: linux-uvc-svn: requires kernel26<2.6.26
If you've any idea about this issue please let me know.
Regards
Last edited by Koven (2008-08-17 22:17:50)

Ok. Thanks for your help, but removing that package was not the solution because I hadn't installed it. The only reference I had about that package was
5:13# locate linux-uvc-svn ~koven
/var/lib/pacman/local/linux-uvc-svn-238-1
/var/lib/pacman/local/linux-uvc-svn-238-1/depends
/var/lib/pacman/local/linux-uvc-svn-238-1/desc
/var/lib/pacman/local/linux-uvc-svn-238-1/files
/var/lib/pacman/local/linux-uvc-svn-238-1/install
So I decided to remove this folder and my problem was solved. Anyway I did some searches and nothing was found.
Regards

Problem upgrading database from 8.1.6 to 10.2

I have a problem upgrading the database (Oracle) from portal 8.1.6 to 10.2
I have edited the upgrade_db.properties, but when I run upgrade_db.sh it ends with this error message:
[java] Load Failed
BUILD FAILED
/opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml:17: The following error occurred while executing this line:
/opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml:91: The following error occurred while executing this line:
/opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml:103: The following error occurred while executing this line:
/opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml:62: Java returned: 255
Total time: 6 seconds
=======================================================================
ERROR!
CALL TO ant -f /opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml FAILED!
=======================================================================Is there anybody who understand what's going wrong?

It seems that the update scripts got problems because we had used portalAdmin to add new data content types. The update scripts try to add new types too, but use hardcoded primary keys that will already be in use if new data content types are added by the administrator.

My iPhone 4S . the restore Ends at 60 % with error 1 (not -1). I reinstall iTunes, download iOS 7.0.3 as ipsw and No success :( I Think that is a problem of the iTunes or firmware versions :/. Apple Please Help us!

my iPhone 4S the restore Ends at 60 % with error 1 (not -1).
I reinstall iTunes, download iOS 7.0.1 as ipsw and No success
I Think that is a problem of the iTunes or firmware versions :/.
Apple Please Help us!

You can't Restore to any iOS other than 7.1.
If the error persists, try on another computer. Still no joy, it is a hardware failure.

Problems upgrading camera raw 8.3 to 8.5, upgrade finished but version 8.3 still shows in Bridge

problems upgrading camera raw 8.3 to 8.5, upgrade finished but version 8.3 still shows in Bridge

Moving this discussion to the Adobe Camera RAW forum.

We now use Acrobat xi for special active forms we created that include certifications and signature fields, some of the forms are programmed to create other forms, will we have a problem upgrading to DC

We now use Acrobat xi for special active forms we created that include certifications and signature fields, some of the forms are programmed to create other forms, will we have a problem upgrading to DC
Our users use a form template to create other adobe forms with calculated fields, signature fields (using digital signatures)
, and buttons. Will we be able to continue developing these forms if we upgrade to Acrobat DC?

Hi Alex ,
In general ,you would not have any issues and problems moving to Acrobat DC .It has a different user interface and with more enhanced features .
You would be able to develop the kind of forms you are referring to .
You could refer to the following document to get more information about Acrobat DC .
FAQ | Adobe Acrobat DC
If in case you are referring to any particular issue or problem or if you face any regarding Acrobat DC ,we are always here to help you with that .
Please feel free to write us back .
Regards
Sukrit Dhingra

Will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?

will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?

Impossible to know. But I would make a backup before doing so, just in case. I would also do the following:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you wish to save yourself a lot time should you need to reinstall Mavericks at some point in the future then see the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
   2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
     sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
     /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time. When completed it would be wise to test the installer by checking that it boots the computer and is then ready for installation.

Are their problems upgrading from windows 7 to windows 8 on HP touchsmart 320 pc

Does anyone know if their are problems upgrading windows 7 to windows 8 on my touchsmart 320 PC and if I decide to upgrade can I remove the windows app and go back to windows 7 without problems?
Ms. BYP

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the back or bottom of the computer. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
THIS is HP's position on Windows 8 support and any HP computer not originally shipped with Windows 8;
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
and
Important information regarding additional limitations and requirements;
Screen Resolution Requirements
Limitations with DVD playback software
Limitations with Blu-ray playback software
Limitations with TV Tuner software
Secure Boot & other UEFI dependent features
Limitations with touch screen capabilities;
Windows 7 (and Windows Vista) PCs with touch screens will not have full Windows 8 touch capabilities after upgrade.
HP PCs with touch input hardware designed for Windows 7 (or Windows Vista) will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points. Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7 (and Window Vista).
HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
I did a "clean" install of Windows 8 on my HP TouchSmart 320-1120m CTO Desktop Computer and had NO issues at all. If you do an actual "upgrade", please be aware that much of the HP value-added software that came with the computer will have to be uninstalled before doing the upgrade. You may also run into other minor issues with other software already on the computer. The only way to go back to Windows 7, is to use the HP Recovery Discs you should have already created. If you haven't yet created these discs, do so BEFORE upgrading to Windows 8.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Problem upgrading and installing virtualbox-modules

Have some problems upgrading and installing virtualbox-modules
[elgringo@compjotr Desktop]$ sudo pacman -S community/virtualbox-modules
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: lirc: requires kernel26>=2.6.26-1
:: nvidia: requires kernel26>=2.6.26-1
Had to uninstall lirc nvidia and virtualbox-modules before I could upgrade the kernel and now I can't install the virtualbox-modules.
Anyone else who experienced the same problems?

virtualbox-modules depends on the kernel in core. If you want to use the kernel in testing, you'll need to rebuild the virtualbox-modules against it.
Virtualbox-modules will be fixed when kernel 2.6.26 will be moved in core. So you can wait if you prefer.

Problem upgrade my 5230 to firmware to v40

Similar Messages

Maybe you are looking for