Problem upgrading WAE 512 from 4.1.5f to 4.2.3
Hi guys,
I've just upgraded a wae 512 from version 4.1.5f to 4.2.3 using the Rescue CD but after the installation the CLI shows me an error:
No directory /local/local1!
Logging in with home = "/".
System Initialization Finished.
Disk based software not installed.
Some applications may not run correctly!
show version command:
CORE#sh ve
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2010 by Cisco Systems, Inc.
Cisco Wide Area Application Services Software Release 4.2.3 (build b7 Jul 29 201
0)
Version: UNKNOWN-PRODUCT-4.2.3.7
Compiled 01:16:47 Jul 29 2010 by damaster
Device Id: 00:14:5e:95:ef:67
System was restarted on Wed Sep 22 15:30:32 2010.
The system has been up for 5 minutes, 37 seconds.
I can't access interface giga and ohter commands neither. I really appreciate your help
Thanks in advance
Lenin
Dear smnambia,
i have problem the Wae 512 RMA can't booting stack at disk-100: disk apply.
and i follow how to use rescue CD
Enter the following option in sequence
2,3,5,8 and 9
for number 2,3,5 is normally,
but when i wipe disk and press yes.
Installer Main Menu:
1. Configure Network
2. Manufacture flash
3. Install flash cookie
4. Install flash image from network
5. Install flash image from usb/cdrom
6. Install flash image from disk
7. Recreate RAID device (WAE-674/7341/7371/7541/7571/8541 only)
8. Wipe out disks and install .bin image
9. Exit (reboot)
Choice [0]: 8
Using cd-rom device (/dev/scd0)
Enter full URL of .bin image to install.
ftp://[user:pass@]ip_addr/path/to/file
http://[user:pass@]ip_addr/path/to/file
file:/local/path/to/to/file
URL for .bin image [file:/media/images/waas-universal-4.4.1.12-k9.bin]:
Continue? This will wipe out all disks! [n]: y
unmount device (/dev/scd0)
Scro
and nothing happen for a long time. its normal??
how long when we wipe the disk?
Similar Messages
-
Problem upgrading to cloud from CS 5.5
I wanted to take advantage of the special upgrade pricing for previous CS users. I have CS 5.5 Master Collection that I obtained while I was a student. When I go through the system to get the upgrade price, it asks for a serial number. However, when I registered, I had to type in a code and then got a serial number for the different products. When I insert one of these serial numbers that I found in an old email, it says I don't qualify. Do I not quality because I am upgrading from a version I obtained as a student?
>obtained while I was a student
Does not qualify, because you bought at a discount -
Problem upgrading to Tiger from OS 8.6
I have a Power Mac G4 with OS 8.6, I'm trying to upgrade to Tiger. I put in the DVD and it boots, it then goes through the whole installation without any errors and then restarts. Then when the computer boots up it shows a grey screen with an apple logo in the center and a circular loading thing below it. Then after a while the apple logo turns into a circle with a cross through it. I've tried reinstalling it twice now and I keep getting this. I don't have my original 8.6 discs or anything and I'm starting to freak out a little. What do I do?
Hi roryt,
first please check the 10.4 Tiger System requirements. You have to uppgrade to at least OS 9.1 first, better 9.2.2. Then open system profiler and check which computer you have. Once you found that download and apply the corresponding firmware upgrade: Mac OS X: Chart of Available Firmware Updates
Be aware that you need a DVD-drive for Tiger since it only ships on DVD. -
WAAS Upgrade CM path from 4.4.7 WAE-512 to 5.4 vCM
I have a deployed WAAS system running 4.4.7 and the old WAE hardware is all on the EOL clock or not supporting 5.4 at all. The budge fairies had money at the end of the year so I've got new WAVE boxes and vCM 5.4 DVDs to deploy.
My question is what is the upgrade process for the CMs?
Can I simply spin up two 5.4 vCMs as a secondary CMs to the 4.4.7 primary CM on a WAE-512, then make one the primary? That would assume that a 5.4 secondary could sync to and then take over directly from a 4.4.7 primary. That's the bit that I have doubts about.
Or would I have to start with vCMs at 4.4.7 to get them to sync, then take over as primary and upgrade them? Is there a 4.4.7 vCM image?
If that's a dead end, I saw another discussion about downgrading a WAVE-294. I'm thinking one could be downgraded to 4.4.7, joined as a secondary CM, promoted to primary, and then upgraded as a stepping stone to vCMs at 5.4. Then the '294 would be deployed back as accelerator as originally intended. Any pitfalls with this?
Or is there a simpler path that I'm missing entirely?
Also can anyone confirm that the RJ-45 console ports on the WAVE-*94 have the same pin-out as traditional Cisco switch RJ-45 console ports?
Thanks.Hi Edward,
For the upgrade process, you'll have to follow this procedure :
http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v541/release/note/waas541xrn.html#pgfId-171257
So either down grade your vCM to 4.4.7 (this requires that it is a vCM-100 or -2000)
- there probably is a vCM 4.4.7 image out there somewhere, but these could be hard to get.
- or just use the "copy ... install" on your vCM, to get it downgraded.
or use the 294 method (same methodology applies)
But as I see it, there is no need to play around wit ha secondary CM, you don't need the CM to ensure optimization, when things are up and running.
You can easily change a CM to an accellerator by configuration and a reload, unless we're taking vWAAS, where the ova image is locked.
remember to take a backup of your CMS database and place it somewhere else, before starting upgrading.
Best Regards
Finn Poulsen -
WAE 512 and problem with services
Hi
I have few WAE 512 installed in my network. Every use 4.1.5b software. I have problem with one. I have upgraded it from CD and after that I see below alarms:
Directy after WAE restart appear:
Major: DRE (DRE+LZ) initialization failed: <>
after about 15 minutes other alarms appear:
Critical: nodemgr: The wafs_edge service has been disabled.
Critical: Edge is down.
Do you know where should I look for a problem source ?
Thanks in advance
JamesHi
Here you are the outpu:
ps. after 3 days these alarms disapeard. When I've restarted WAE alarm appeared and after 3 days desapered again....
Physical disk information:
disk00: Present 5QD39305 (h02 c00 i00 l00 - Int DAS-SATA)
715402MB(698.6GB)
disk01: Present 5QD392VR (h02 c00 i01 l00 - Int DAS-SATA)
715402MB(698.6GB)
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
/sw internal /dev/md0 991MB 914MB 77MB 92%
/swstore internal /dev/md1 991MB 880MB 111MB 88%
/state internal /dev/md2 5951MB 256MB 5695MB 4%
/local/local1 SYSFS /dev/md5 14878MB 1277MB 13601MB 8%
/disk00-04 CONTENT /dev/md4 668196MB 119653MB 548543MB 17%
.../local1/spool PRINTSPOOL /dev/md6 991MB 16MB 975MB 1%
Software RAID devices:
DEVICE NAME TYPE STATUS PHYSICAL DEVICES AND STATUS
/dev/md0 RAID-1 NORMAL OPERATION disk00/00[GOOD] disk01/00[GOOD]
/dev/md1 RAID-1 NORMAL OPERATION disk00/01[GOOD] disk01/01[GOOD]
/dev/md2 RAID-1 NORMAL OPERATION disk00/02[GOOD] disk01/02[GOOD]
/dev/md3 RAID-1 NORMAL OPERATION disk00/03[GOOD] disk01/03[GOOD]
/dev/md4 RAID-1 NORMAL OPERATION disk00/04[GOOD] disk01/04[GOOD]
/dev/md5 RAID-1 NORMAL OPERATION disk00/05[GOOD] disk01/05[GOOD]
/dev/md6 RAID-1 NORMAL OPERATION disk00/06[GOOD] disk01/06[GOOD]
Disk encryption feature is disabled.
regards
James -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
Problems upgrading from OS 8.1 to OS 9.2.2
Thank you for any help you can give me.
I have some additional problems upgrading from OS 8.1 to OS 9.2.2.
1. The keyboard is typing symbols, not normal letters. When I go to Key Caps it shows symbols and not normal letters. When I was running OS 8.1 the keyboard typed fine.
2. I also am have trouble with windows closing as I open new windows. Everytime I click to open a new folder the old folder closes.
3. Copying files. When I drag a file it makes a new copy on the desktop.
How did I goof up going from OS 8.1 directly to OS 9.2.2?
All these problems were fine while running under OS 8.1.
I believe this computer came with OS.8.6 installed on it but I got it with OS 8.1.
Any help you can pass on to me would be greatly appreciated.
I am typing this on my Dell PC.
Thanks a million,
Jim
iMac G3 333 Mac OS 9.2.xEasy, I just insert my OS 8.1 System Software into the tray loading CD and choose it as the start up disk in the control panel. I restart the computer and it is running off of OS 8.1 instead on OS 9.2.2. I looked for another keyboard today at a used computer store but they didn't have one for the iMac. I need to find one as all my research indicates that it is somehow connected to the option key. But then again everything works fine under OS 8.1. Quite a puzzle to me. Again thanks for the page tip on Firmware. Jim - PS, I did pick up a zip drive that connects to USB ports.
iMac G3 333 Mac OS 9.2.x -
I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud. I have iphoto '08,version 7.1.5. Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that. suggestions? thanks!
You have to buy iPhoto from the Mac App Store.
-
WAE 512 and transaction logs problem
Hi guys,
I have a WAE 512 with ACNS 5.5.1b7 and I'm not able to export archived logs correctly. I tried to configure the WAE as below:
transaction-logs enable
transaction-logs archive interval every-day at 23:00
transaction-logs export enable
transaction-logs export interval every-day at 23:30
transaction-logs export ftp-server 10.253.8.125 cache **** .
and the WAE exported only one file of about 9 MB even if the files was stored on the WAE as you can see from the output:
Transaction log configuration:
Logging is enabled.
End user identity is visible.
File markers are disabled.
Archive interval: every-day at 23:00 local time
Maximum size of archive file: 2000000 KB
Log File format is squid.
Windows domain is not logged with the authenticated username
Exporting files to ftp servers is enabled.
File compression is disabled.
Export interval: every-day at 23:30 local time
server type username directory
10.253.8.125 ftp cache .
HTTP Caching Proxy logging to remote syslog host is disabled.
Remote syslog host is not configured.
Facility is the default "*" which is "user".
Log HTTP request authentication failures with auth server to remote syslog host.
HTTP Caching Proxy Transaction Log File Info
Working Log file - size : 96677381
age: 44278
Archive Log file - celog_213.175.3.19_20070420_210000.txt size: 125899771
Archive Log file - celog_213.175.3.19_20070422_210000.txt size: 298115568
Archive Log file - celog_213.175.3.19_20070421_210000.txt size: 111721404
I made a test and I configured the archiveng every hour from 12:00 to 15:00 and the export at 15:10, the file trasnferred by the WAE was only three one of 12:00 the other of 13:00 and 14:00 the 15:00 has been missed.
What can I do?
Thx
davideHi Davide,
You seem to be missing the path on the FTP server; which goes on the export command.
Disable transaction logs, then remove the export command and then add it again like this: transaction-logs export ftp-server 10.253.8.125 cache **** / ; after that enable transaction logs again and test it.
Let me know how it goes. Thanks!
Jose Quesada. -
Problem upgrading database from 8.1.6 to 10.2
I have a problem upgrading the database (Oracle) from portal 8.1.6 to 10.2
I have edited the upgrade_db.properties, but when I run upgrade_db.sh it ends with this error message:
[java] Load Failed
BUILD FAILED
/opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml:17: The following error occurred while executing this line:
/opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml:91: The following error occurred while executing this line:
/opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml:103: The following error occurred while executing this line:
/opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml:62: Java returned: 255
Total time: 6 seconds
=======================================================================
ERROR!
CALL TO ant -f /opt/bea102portal/wlserver_10.0/common/p13n/db/build_createdatabase.xml FAILED!
=======================================================================Is there anybody who understand what's going wrong?It seems that the update scripts got problems because we had used portalAdmin to add new data content types. The update scripts try to add new types too, but use hardcoded primary keys that will already be in use if new data content types are added by the administrator.
-
Problem upgrading iPad from iOS 4.2 to 4.3....
Before I start, I can confirm that I have successfully upgraded my iPhone4 from 4.2 to 4.3.
In regard to the iPad, when I click on the 'Check for update' button in my iTunes device summary page, it states that 4.2 is the 'Current Version', even though I know that iOS 4.3 is available. Therefore to try and force an update I selected the 'Restore' option in the same summary page and it prompts me if I am sure that I want to restore etc... which I confirm with the RESTORE, then I get an error message of _'There was a problem with downloading the software for the iPad "iPad". The requested resource was not found.'_
Anyone have any ideas how to get around this issue, or why iTunes is telling me that 4.2 is the latest version.
Thanks in advance.here's a tip from another thread http://discussions.apple.com/thread.jspa?threadID=2777490&tstart=0
-
Will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?
will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?
Impossible to know. But I would make a backup before doing so, just in case. I would also do the following:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you wish to save yourself a lot time should you need to reinstall Mavericks at some point in the future then see the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
/Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time. When completed it would be wise to test the installer by checking that it boots the computer and is then ready for installation. -
Problem activating Facetime on iMac: I recently upgraded my iMac from Snow Leopard to Mountain Lion.
Since the upgrade, when I try to sign on with my valid Apple ID & password I get this message "The server encountered an error processing registration. Please try again later."
I have tried (again later) repeatedly without success. PLEASE HELP! -
Are their problems upgrading from windows 7 to windows 8 on HP touchsmart 320 pc
Does anyone know if their are problems upgrading windows 7 to windows 8 on my touchsmart 320 PC and if I decide to upgrade can I remove the windows app and go back to windows 7 without problems?
Ms. BYPWhen requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the back or bottom of the computer. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
THIS is HP's position on Windows 8 support and any HP computer not originally shipped with Windows 8;
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
and
Important information regarding additional limitations and requirements;
Screen Resolution Requirements
Limitations with DVD playback software
Limitations with Blu-ray playback software
Limitations with TV Tuner software
Secure Boot & other UEFI dependent features
Limitations with touch screen capabilities;
Windows 7 (and Windows Vista) PCs with touch screens will not have full Windows 8 touch capabilities after upgrade.
HP PCs with touch input hardware designed for Windows 7 (or Windows Vista) will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points. Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7 (and Window Vista).
HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
I did a "clean" install of Windows 8 on my HP TouchSmart 320-1120m CTO Desktop Computer and had NO issues at all. If you do an actual "upgrade", please be aware that much of the HP value-added software that came with the computer will have to be uninstalled before doing the upgrade. You may also run into other minor issues with other software already on the computer. The only way to go back to Windows 7, is to use the HP Recovery Discs you should have already created. If you haven't yet created these discs, do so BEFORE upgrading to Windows 8.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Maybe you are looking for
-
To know the amount of free space in a tablespace
hi, I'm learning oracle 9i release 9.2.0.1.0 .I'd created a tablespace 'TOOLS' for being used as the default tablespace for Statspack. I wish to know the amount of free space available in this tablespace. For this purpose I ran the following query bu
-
i also am no longer using my hotmail account which is my apple id. I wish to change my apple id to a .me e-mail address. can i not do this?
-
I want to load uk data and us data ?
Hi guru's, i have One infopackage, i want load uk data for 6.30am and us data for 6.30 pm same infopackage, if possible, can u give me the step by step. Thanks prabha reddy
-
I have my Mac Mini connected to a 50" Panasonic Plasma using a DVI – HDMI cord (the native resolution of my set is 1366x768). I was able to get my 1280x720 picture displayed perfectly on the screen after using SwitchresX, and performing a decent amou
-
Changing EPN topology programmatically
Hello, I haven't been able to programmatically add new elements to an EPN. I've just found this thread, that is one year old, and seems to confirm that it is not possible: Examples of programatic creation of EPN elements Could you please confirm that