Problem uploading an IDOC from File

hello everybody,
I'm using function IDOC_XML_TRANSFORM to upload an IDOC from a file, I have a problem with the function cause is searching the segments of the idoc in table EDSAPPL, now the problem is that the segment is not in that table, it should exist cause the IDOC was generated by the same system, now is there a process that should be done to update this table?, thanks in advance.
Regards,
Julio Cesar Ruiz

hi
chk this
Re: iDOC creation from a flat file
hope this helps
regards
Aakash Banga

Similar Messages

Create IDOC from file

I have received an IDOC order file, and I know there is a standard program RSEINB00 to create IDOC in system.
I would like to delete/add segments, change field contents in segements in the IDOC according to some of the segments in IDOC. Where can I manuplate it?
Thanks for your advice.

I am not test an IDOC file. I regularly receive IDOC file and need to manuplate the content, e.g. delete some of the segments, determine and fill in field content in some segments.
I just wonder if I can change the IDOC content after it is created in system, just like what I can do in WE19, but using a program. Is there any standard program for this purpose?
Or is there any user exit I can use when creating IDOC from file?
Thanks.

I have problems uploading a journal from iPhoto in my iPad, the web page online works on the iPad but I can't open the link on my computer

I have problems uploading a journal from iPhoto in my iPad, the web page online works on the iPad but I can't open the link on my computer

What did you rent the film on, your iPad or your Mac ? If you rented it on your iPad then it should have downloaded into the Videos app on it (you should get a rentals tab in the app). If you rented it on your Mac then it should be in the Movies part of your Mac's iTunes library, you will have to connect your iPad to your Mac's iTunes and move it from your Mac to your iPad (I think that it should show on the iPad's Movies tab for moving)

Format file problem uploading electronic bank statement files FF_5 RFEBKA00

hello
I am facing a problem when uploading electronic bank statement files with the file format. The situation is as follows:
1- Electronic bank statement files are sent by FTP from the bank to a certain directory in AL11
2- we have developed a "z" program that just picks electronic bank statement files from AL11 directory and process them using standard FF_5 (RFEBKA00) program.
3- When processing some files had an error, when debugging we have verified that errors are caused by some "special" characters non Unicode as "®" (=Hex'AE') with UTF-8, a '#' is displayed.
SAP answers a question as follows:
AL11 is designed to display os-files (log-files, trace-files etc.)
from within the SAP-system for supporting purposes in order not to
logon to the os itself.
It was not designed to display any file-content in the system created
with any code-page.
AL11 opens the file in textmode with encoding option default, which
means UTF-8 in a unicode system and NON-UNICODE in the other case.
You cannot change this setting.
If you have the need to specify these options, depending on your files,
you can make a copy of report RSWATCH0 and customize the OPEN-statement
to yor needs.
On a Unicode system, the files need to be in Unicode format (UTF-8).
Eg:When you interpret a non-Unicode "®" (=Hex'AE') with UTF-8, a '#' is
displayed.
Case 1:
Who is creating those files? Are these files
1) created by you
2) are they written by a SAP application?
==>There are the notes 752835 and 747615 for cases like these.
In case 2) it may be that the application responsible for the file
download (not AL11!) should be the problem, considering note 752835.
There is also the possibility for you to convert the file to the correct format using our tool RSCP_CONVERT_FILE (note 747615).
System administrator has told me to copy standard RFEBKA00 program and modify the OPEN-statement but I am not agree because I think that the problem is when generating the files in bank's system and/or sending the files to SAP by FTP.
Does any body face a problem like this before? Any ideas?
Thanks a lot

Hello,
The files that are available in AL11 are in Unicode.
Can you convert them to text by using the following method and then try:
You must have mapped this directory and having access.
Right click on file
Open with: Microsoft Office Word
Then the pop-up comes: File conversion - bacs
Select Other encoding radio button
Then select "Unicode" from list
and say OK
Now the file is being opened in readable format:
File SAVE as PLAIN TEXT
Save the file in the same folder that you are referring to in AL11
Now if you try with this .txt file, it should work in FF_5
Thanks,
Ravi

Problem while sending IDOC to File Senario

Hi Experts
    I am having problem while sending the Idoc from SAP R/3 to File
   I have done all the setting in SAP as well in XI but while pushing IDOC
   I am getting error in the transaction sm58 in SAP R/3
" <b>The service for the client 300(My SAP R/3 client) is not present in Integration
Directory</b>"
I can any one explain me what to done on this....all the connections are fine
Waiting for Response
Adv points and thanx
Rakesh

Reason and Prerequisites
You send IDocs from system ABC to the exchange infrastructure (XI) of system XIZ, and error messages are issued in system ABC (Transaction SM58) for the IDOC_INBOUND_ASYNCHRONOUS function module.
This note proposes solutions for the following error messages:
a) No service for system SAPABC client 123 in the integration directory
b) Transaction IDX1: Port SAPABC, client 123, RFC destination
c) ::000
d) NO_EXEC_PERMISSION: "USER" "Business_System"
e) IDoc adapter inbound: Error error ...
Solution
a) Error message: No service for system SAPABC client 123 in the integration directory
Solution:
You send IDocs from system ABC to XI. In the control record of the IDoc, the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the type (business-system/business-service):
Business system
Activities in the System Landscape Directory (SLD)(Create technical system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client.
For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the "Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with TransactionSLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD.
In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
b) Error message: Transaction IDX1: Port SAPABC, client 123, RFC destination
Solution:
The Integration Server tries to load the IDoc metadata from the sending system. The IDoc schemas from the Integration Repository cannot be used because they are release-dependent.
The sending system is determined by the value of the "SNDPOR" field from the IDoc control record (for example, "SAPABC").
Activities in the central XI system:
In Transaction IDX1, you can assign an RFC destination to the sending system (for example, "SAPABC"). This must be created beforehand in Transaction SM59.
Note that the IDoc metadata is cross-client data. In Transaction IDX1, only one entry must be maintained for each system. Only the lowest client is used by the runtime for Idoc metadata retrieval with RFC.
Ensure that only SAPABC and not "SAPABC_123" is entered in the port name.
c) Error message: "::000"
Solution:
This error occurs if the central XI system tries to load the IDoc metadata from the sending system by RFC.
There may be several different reasons for the failure of the metadata import, the error is not transferred in full by tRFC completely, and this results in the error message above.
User cannot log onto sending system
User/password/client is not correct or the user is logged due to too many failed logons.
Activities in sender system ABC:
Transaction SM21 contains entries for failed logons.
Activities in the central XI system:
Determine the sending port from the IDoc control record of the IDoc. If the ID of the sending system has the value "ABC", the value of the sending port is "SAPABC". You will find the RFC destination used for the "SAPABC" sending port with the lowest client in Transaction IDX1. In Transaction SM59, you will find the RFC destination containing the maintained logon data .
User does not have the required authorizations
Activities in the sender system ABC:
In Transaction SM21, you will find entries relating to authorization problems and more exact details.
Contact your system administrator and, if necessary, assign the user the required roles in user administration.
IDoctyp/Cimtyp cannot be loaded
Activities in sender system ABC:
In the sender system, you can check your IDoc types in Transaction WE30 (IDoc type editor) Take note not only of the errors, but also of the warnings.
The most common errors are:
- IDoc type or segments not released
- Segments that no longer exist are listed in the IDoc type
- Data elements that do not exist in the DDIC are assigned to fields
in the segment.
Contact your system administrator and correct these errors in the IDoc type.
d) Error message: NO_EXEC_PERMISSION: "User" "Business_System"
Solution:
You created a list of users in the directory who are authorized to use the "Business_System". The user in the error message is not on the list.
Alternatively, the same error is used if you have created a sender agreement with a channel of the IDoc type for the "Business_System" and the interface used. The user in the error message is not contained in the list of all authorized users defined there.
e) Error message: IDoc adapter inbound: Error error
Solution:
You send IDocs to the central XI system, where they are received by the IDoc adapter. The IDocs are converted into IDoc XML, and a corresponding XI message is generated and transferred to the XI Runtime Engine. The Engine tries to read its own business system from the "Exchange Profile". If the Exchange Profile is currently unavailable, the message is not processed and it is returned to the sending system with an error message.
Regard's
Prabhakar.....

Problem Uploading and Sharing Video Files

I just uploaded a 3.3GB h.264 Quicktime movie to Creative Cloud. It took many hours. Now that it's finished uploading, I can't figure out how to play the video while logged into Creative Cloud, despite that fact that under information it's recognized as a mov and 3.3GB. And when I try to share using the link-in-email option, my friend can't play the movie or download it. When he tries to download it, nothing connects. Creative Cloud seems to be treating this movie as a single still image or something. Suggestions as to how to solve these upload and share video problems? I have a 2011 MacBook Pro with all possible upgrades, Mac OS X Version 10.6.8. Any help here much appreciated. One of the reasons I signed on for a year with Creative Cloud was to utilize this 20GB to share video in the way I've done through Dropbox.

Thanks for the reply, Dave, but I don't think this is the problem. I've uploaded this h.264 Quicktime (which plays fine before uploading) a few times now and cannot download or share due to a very long period of "Connecting...", then the message "Problem loading page. The connection was reset. The conection to the server was reset while the page was loading. - The site could be temporarily unavailable or too busy. Try again in a few moments. - If you are unable to load any pages, check your computer's network connection. - If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web." Then I'm given the option to "try again". This or a similar message is what others get when trying to download when I try to share the file with them using the link-in-email method, and neither I nor any of those I try to share this with are having problems with internet connectiions or downloading other large video files from the internet. The reason I suspect that Creative Cloud can't deal with downloading larger files such as this 3.3GB Quicktime is that I have no problem uploading, downloading or sharing small Quicktime movies through CC, and they are identified the same way and look the same when uploaded to CC. I also have no problem downloading much larger video files from other sites on the internet, such as feature length films that are a lot larger than 3.3GB. It seems like only things that download quickly don't time-out, regardless of what browser I'm using. Does Creative Cloud's download system rely on files being able to be downloaded quickly in full before a browser's time-out? As I've mentioned before, I have no problem uploading, downloading, sharing, etc. using Dropbox. Long explanation here, I know, but I thought all this info might help in figuring things out. Any ideas as to what's going on?

Problem in Outbound IDOC from SAP R/3

Hi,
I am working on to send an IDOC from SAP R/3 to XI.
I configured all necessary things as follows:
1. Created for XI in sender system -- RFC dest, PORT and a partner profile with an outbound parameters and reciever port as XI port.
2. created for sender system in XI -- RFC dest, PORT(as SAP<SID>) in IDX1 and assigned an idoc type(coming from sender system) to the port.
Now I am trying to push the IDOC from sender system using Test IDOC transaction and gets success message as data is passed to port.
My problem is I am not able to see any message in SM58 of XI server.
Could anyone help me out?
Thanks In Advance.
Yaseen.

Yasseen,
you hardly see the idocs in Xi in sm58. Try sxmb_moni.
If you see anything there try sm58 on the sending R/3. There you see if you have connection problems (eg authorization in XI or missing receiver determinitions).
Hope it hellps,
helge

Problems at sending IDOC from XI to R/3

Hello everybody, I have a problem sending an IDOC (WPUUMS) from XI to R/3. Everytime the ERP system presents overflow problems at the locked table, the IDOC, send by the XI, is not created. The type of the sending message is asynchronous. I tried to use the ALE configuration but it doesn´t seem to work.
I hope anyone can help me to figure out this issue.
Thank you.

Julio
Please try this...
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe?quicklink=index&overridelayout=true
http://help.sap.com/saphelp_nw70/helpdata/en/44/a1b46c4c686341e10000000a114a6b/content.htm
Check the Queue [SMQ2] & if the message got struck in queues clear the queues
Then goto SMQR - De-register & register the queues.
I hope it helps you ...
Thanks,
Vasanth.

Help! Problem with reading objects from file

I wrote a "Library" program for an assignment, and one of the requirements is that the library store all of its information to file upon exit, and reload this information from file when run.
Well, the writing to file part is working. I'm using a FileOutputStream object and an ObjectOutputStream object. I can tell from the file size of the .dat file that information is going into it.
But what I can't do is read from file. For that, I'm using a FileInputStream and an ObjectInputStream. I keep getting this exception:
java.io.EOFException
     at java.io.DataInputStream.readInt(Unknown Source)
     at java.io.ObjectInputStream$BlockDataInputStream.readInt(Unknown Source)
     at java.io.ObjectInputStream.readInt(Unknown Source)
     at Library.readDataFromFile(Library.java:350)
     at Library.<init>(Library.java:63)
     at LibraryDriver.main(LibraryDriver.java:6)I looked this exception up and it says it's thrown when a data input stream unexpectedly ends....But I am instantiating the input streams just before I try to read from file:
                        fileInStream = new FileInputStream(libraryFile);
               objInStream = new ObjectInputStream(fileInStream);
               Object[] objectArray = new Object[objInStream.readInt()];Both input streams have methods that "return the number of bytes that can be read from this file input stream without blocking". Just for kicks, I tried writing that number to the console.
For the FileInputStream, I get 404 bytes.
For the ObjectInputStream, I get 0 bytes.
So I guess it's a problem with the ObjectInputStream? Anyone have any suggestions as to how I can fix this, please?

Yep, here's the relevant code from the writeToFile() method:
                      for (int i = 0; i < libraryAuthors.length; i++) {
                    currentAlphaAuthorList = libraryAuthors;
                    for (int j = 0; j < currentAlphaAuthorList.size(); j++) {
                         currentAuthor = (Author) currentAlphaAuthorList.get(j);
                         objOutStream.writeObject(currentAuthor);
               objOutStream.flush();
               objOutStream.close();

Problem when sending IDOC from ECC to MII 12.0

Hi all,
   I have followed the document "[How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50775783-6cb1-2b10-90b0-e6bc2c0b8563]" to configure the scenario to send IDOC from SAP ECC 6.0 to MII 12.0.
   But when sending 53 IDOCs by Tcode POIT to MII, I have problem as below:
   - 53 IDOCS were successfully outbounded (list in WE02).
   - 8 IDOCs were successfully sent to MII IDOC listener (these 8 IDOCs messages exist in list of Message Monitor).
   - 45 IDOCS were error with message in SM58: "Bean IDOC_INBOUND_ASYNCHRONOUS not found on host xxx, ProgId=yyy".
   I'm wonder why some IDOCs were successful while some others were error. If the bean IDOC_INBOUND_ASYNCHRONOUS don't exist in EJB, why some IDOCs successful found this bean?
   I have another wonder: in this scenario document, all IDOC message type (SYNCH, LOIPRO) is configured in outbound parameters of RECEIVER (receiver logical system), why they weren't configured them in outbound parameters of SENDER (sender logical system)?
   If some have the same problem and know how to resolve it, could you please help me?
Thank a lot in advance,
Vinh Vo

Hi Vinh,
Please read the following document:
[IDOC Listener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
If you explicitly defined a Prog ID in NW, then you have done an extra step and are confusing NW with the real destination.
In basic terms, you set up an RFC destination (with an assigned ProgID) in ERP, then configure MII to point to it.
I suggest that you follow the document completely and do nothing else to set up a new listener.
If you are not using ECC 6.0, you may find the paths are different, but the transactions codes are generally the same. However, you may want to check with some of the older installation instructions regarding specific modifications. Look in the Wiki for MII under Connectivity.
Good luck,
Mike

Problems with load DSO from file

I am working with BI 7.0.
I am loading data from file to DSO and my problem is that data is not active in my DSO, the data are loaded how New Data and I haven´t the data in query and DSO.
The settings of my dso are:
Type: standard
SIDs Generation upon Activation: X
Set Quality Status to 'OK' Automatically: X
Activate Data Automatically: X
I have created one transformation from datasource to DSO and one DTP that extract from datasource ( No PSA).
When I execute the DTP there aren´t errors, the status is green and ok but the data is not active.
If I try activate the data manually the job is launched but the data no active.
Thanks.

hai
Isabel Bautista
u r saying the data is not active in dso and also u r loading the data from file directly( no psa).
i think u know in B.I the data should be in psa then only u can load the data using DTP .so how can u load the data with out data in psa .i thinks may be because of this u r data is not activating in dso
if it helps
assign some points ok

Problem when pushing IDOC from SAP to XI

Hi,
I am trying to push an IDOC from SAP R/3 system to XI. When I processed the IDOC using test tool(WE19), it's showing message that IDOC sent succesfully to R/3 or External system. But in SM58 Transaction it gave error message that in Trabsaction IDX1: some RFC connection error. Then I opened the Transaction IDX1 on XI server, in that IDOC Adapter configuration I gave RFC destination, Logical system name of R/3 and saved it. Now When I tried again to push IDOC from R/3 to it's not giving any error message(in SM58), but I am not able to see any thing in SXMB_MONI. Can anybody guess what's happening? And also I am using fresh newly installed XI server. DO I need to configure something else? All RFC connections are well defined and working fine.

Hi,
It is not required to create Sender Agreement for the Idoc to XI scenario. Because it is implicitly exists.
Can u check Receiver Determination created in the XI once again. And also check for RFC destinations created in the R/3.
Hope it helps ..
-Moorthy

Inbound idoc from file

i run a job to upload text file to inbound processing of IDoc
the job run in two steps with two program
RSEINB00 : to upload the file
RBDAPP01 :to activate the list of the idocs
but the job failed in the second step and it return
" During inbound processing of IDoc , an error occurred. The event for object type 'IDOC' could not be triggered "
any one know why ???

Hi Kenny
I have also faced a similar issue in the past: To automate the process of file reading and triggering the inbound process whenever partner system (legacy system) copies a text file (containing data to be posted) to the SAP application server.
To automate file reading for inbound process, you have to use SAP events. You can define these events using transaction SM62.
This event will be used to execute the IDOC create program in a job based on this event.
Every time the partner system copies the extract file to the SAP application server, this event will be triggered which then runs the job for processing the data file.
For more information on using SAP events, click the following link and look into topics under heading Using events to trigger job starts:
http://help.sap.com/saphelp_erp2005/helpdata/en/fa/096e44543b11d1898e0000e8322d00/frameset.htm
the topic, Triggering events from external programs is quite interesting.
Cheers
Ashish Jain
[email protected]

Problem on inserting text from file to a clob column

Hi! I'm having problem in inserting text read from a text file to a clob column in my table.
Here's my code
public void addSyllabusOutline(int syllid)
          CLOB objclob1 = null;
          CLOB objclob2 = null;
          String query = "SELECT outline, projoutline FROM Syllabus WHERE syllabusid = '"+ syllid +"' FOR UPDATE";
          try
               System.out.print("Getting syllabus outline and projoutline clob locator...");
               DBConnection dbconnbean = new DBConnection();
               dbconnbean.openConnection();
               ResultSet rst = dbconnbean.executeQuery(query);
               if(rst.next())
                    objclob1 = (oracle.sql.CLOB)rst.getClob("outline");
                    objclob2 = (oracle.sql.CLOB)rst.getClob("projoutline");
                    Writer clobwriter1 = ((oracle.sql.CLOB)objclob1).getCharacterOutputStream();
                    String filename1 = "c:\\o1u2t3l4i5n6e7.txt";
                    File outlinefile1 = new File(filename1);
                    FileReader outlineFileReader1 = new FileReader(outlinefile1);
                    char[] cbuffer1 = new char[10 * 1024];
                    int nread1 = 0;
                    while((nread1 = outlineFileReader1.read(cbuffer1)) != -1)
                         clobwriter1.write(cbuffer1, 0, nread1);
                    //clobwriter1.flush();
                    clobwriter1.close();
                    Writer clobwriter2 = ((oracle.sql.CLOB)objclob2).getCharacterOutputStream();
                    String filename2 = "c:\\p1r2o3j4o5u6t7l8i9n0e.txt";
                    File outlinefile2 = new File(filename2);
                    FileReader outlineFileReader2 = new FileReader(outlinefile2);
                    char[] cbuffer2 = new char[10 * 1024];
                    int nread2 = 0;
                    while((nread2 = outlineFileReader2.read(cbuffer2)) != -1)
                         clobwriter2.write(cbuffer2, 0, nread2);
                    //clobwriter2.flush();
                    clobwriter2.close();
               System.out.println("done");
               dbconnbean.closeConnection();
          catch(Exception e)
               System.out.println("Error: " + e);
My error is java.sql.SQLException fetch out of sequence. I don't have an Idea on what seems to be the problem. Please help.. Thank you very much. ^_^

Hi,
Print the whole stack trace. It will tell you the line which causes the error. How you use clob and blob in oracle is also version dependent. Try to google for
oracle "your version" java clob example.
/Kaj

Problems with posting iDocs from MDM in SAP R3

Hi,
I am an MDM consultant, with limited knowledge about SAP R3.
We send material master data from MDM, via PI to R3 using iDocs.
We are having problems with posting MATMAS, and it seems the problems are with updating already existing materials.
In BD87 we get the following warnings:
The field MARA-ERVOE is not ready for input and was therefore not initialized
The field MARA-ERVOL is not ready for input and was therefore not initialized
The field MARA-FERTH is not ready for input and was therefore not initialized
The field MARA-KZGVH is not ready for input and was therefore not initialized
The field MARA-XCHPF is not ready for input and was therefore not initialized
With the last message being:
No changes made
I have checked the MDM syndicator, and none of these idoc-fields are linked to the MDM repository.
So they are syndicated blank.
If we try to resend the material, it is again stopped and in BD87 I see the same messages.
Please help me understanding how to solve these issues.
Thanks,
Thomas

Hi,
Please refer the below threads which talks about the similar problem
http://scn.sap.com/thread/3180116
http://scn.sap.com/thread/1374222
Generally the basic view of the material to be created first. Then the sales, purchasing and other views to be created.
There are few fields in the other views which gets values from the basic data view.
Regards,
Antony

Problem uploading an IDOC from File

Similar Messages

Maybe you are looking for