Problem uploading videos when using Cutetube.

When I try to upload a video, I get the following error message displayed:
"Error - Server response is:"
Having tried several times it then said:
"Error - Server response is: Bad Request"
Does anyone know what this means or how I can resolve it?
Also the other day my phone froze and it said something about hildon shutting down. I can't remember the exact message. Could this be the problem?
Thanks

Welcome to Apple Discussions!
This usually occurs when your iPod is set to manually manage songs and playlists. Try setting your iPod to automatically update. Also, try dragging the videos to the iPod (under Source on the left of iTunes).
btabz

Similar Messages

Problem Capturing Video when using A/D converter

I'm reasonably new to Final cut, but not a complete novice.
I have had good success in the past capturing video and also using the log and batch capture feature using a DV tape in my camcorder and having FCP control the camcorder.
Now I tried something that I have done in my past when I was using imovie 06. I have a VHS tape in my VCR connected to my Mac through my camcorder which acts as an A/D converter.
The problem is that when I do a log/capture and capture now, I start my VCR and see the video in the viewer but the capture window says that it can't find a timecode and remains black.
Can someone give me some advise on what I'm doing wrong?
Thanks,
Steve

Thanks for the help.. could you point me in the right direction on where I set this setting? I looked in my Lisa Brenneis FCP6 book and I can't find a 'capture protocol' in the index.
Thanks,
Steve.

My macbook has problems streaming video when using an external monitor

I have a MacBook from 2007. I have a converter so that the MacBook can be connected to an external monitor, and have connected it to my TV. This works fine, but if I am streaming videos and trying to watch on the TV, the streaming becomes very choppy, almost like the wireless connection is too slow. If I unplug the computer from the TV, however, the streaming returns to normal. I previously connected to a TV with an S-video connection and the problem did not seem as prominent. Now I am connecting to a HD tv using an HDMI connection.
Any suggestions for how to alleviate this? I haven't updated or upgraded the memory or RAM, possibly that would help? Would the amount of files I am storing be causing the problem? I currently have 50 GB available.
Thanks for any help!
Conor

Make sure your Mac is set to a resolution and frequency that your monitor supports.
The other possibility is that your graphics card is fried, but that seems unlikely since your computer is new. Before too long, you should make sure your graphics card is OK using the Apple Hardware Test, but I'm not sure how reliable that is because it claims that my partially broken graphics card is OK.

Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

Problem is:
Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

I get sound no video when using AirPlay. Any ideas?

I get sound no video when using AirPlay. Any ideas?

Do you get an "HDCP error"?
Since the last ATV software update, I have had problems playing You Tube content from the iPad to the ATV using airplay, yet the same content from the You Tube channel on the ATV plays fine. I get the dreaded "HDCP error" which is nonsense, as YouTube content does not have this protection. Netflix also gives the same error. (I have posted seperately about this problem.)
I have had a couple of years of fault-free playing with my setup, the only thing that has changed is the Apple ATV software. Ergo, they need to fix whatever bug they introduced. None of the recommended "fixes" have worked.

When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm usi

When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm using a Mac with Mountain Lion OS. Any solutions?

Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN

Problem in JDBC , when using LIKE operator. - VERY URGENT

Problem in JDBC , when using LIKE operator.
LINE 1 : String temp = "AA";
LINE 2 : String query = "select * from emp where EMPNAME like '*temp*' ";
LINE 3 : Staement st = con.createStaement();
LINE 4 : ResultSet rs = st.executeQuery(query);
'*' character is not getting evaluated. In MS ACCESS2000 only * is accepted instead of '%'. Moreover in MS ACCESS the like operator has to be used within double quotes as a String. whereas in other databases, it accepts single quotes as a String.
Ex:
In MS ACCESS
     select * from emp where ename like "*aa*";
Other Databases
     select * from emp where ename like '%aa%';
In my situation iam passing a Variable inside a like operator and '*' is used.
For the above Scenario, Please help me out.
If possible Kindly let me know the exact Syntax.
Please give me the answer as LINE1,LINE2,LINE3,LINE4,
I have verified in JDBC Spec also, it has been specified to use escape sequence.that too did not work.
Due to this, My project is in hold for about 4 days. I could not find a suitable solution.
Please help me out.

I made a LIKE clause work with M$ Access, using PreparedStatement and the % wildcard:
            escapeStr                   = "%";
            String sql                  = "SELECT USERNAME, PASSWORD FROM USERS WHERE USERNAME LIKE ?";
            PreparedStatement statement = connection.prepareStatement(sql);
            statement.setString(1, ("user" + escapeStr));
            ResultSet resultSet         = statement.executeQuery();
            while (resultSet.next())
                System.out.println("username: " + resultSet.getObject("USERNAME") + " password: " + resultSet.getObject("PASSWORD"));

I'm having problems uploading video taken with my iPhone 4 to Photobucket. FB will not accept the file extension which is ex. IMG_423. They will play on my computer and will upload to Facebook. Why is the phone taking video with this file instead of so

I'm having problems uploading video taken with my iPhone 4 to Photobucket. FB will not accept the file extension which is ex. IMG_423. They will play on my computer and will upload to Facebook. Why is the phone taking video with this file instead of something like .mov or mp4. How can I change the extension after the fact and avoid it in the future?

You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

Problem with SDO_relate when using polygons with holes.

I'm having a problem with sdo_relate. I'm trying to extract all elements from a point table (bdtq_batim_p) that are inside a specific polygon from another table (SDA_MUNIC_SS). The spatial index for both table have been rebuilt and the data from both table is valid.
When I do a count on the query, I know the answer should be 1422 elements (Counted in ArcGIS). However, sdo_relate gives a smaller number of elements in the result set.
The query :
SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and sdo_relate( t.SHAPE,s.SHAPE,'mask=anyinteract querytype=window') = 'TRUE'
returns 282 elements. The query with mask=inside, SDO_Anyinteract() and SDO_inside() all give the same result.
I did a test with the following query and the result is 1422 (which is the good result).
SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE';
It's important to note that the polygone (from SDA_MUNIC_SS) that is used for this query have holes in it. I have the same problem with all the polygons from the SDA_MUNIC_SS table that have holes in it. For the polygon without holes, the results are the same for the 2 queries.
My question are :
Why are the result from the two queries different? A query with a buffer of 0 should always return the same result as a query with Anyinteract.
Is there a known problem with SDO_RELATE when using a polygon with holes in it?
Do you have any idea how to solve my problem.

Since i don't have much control on the version of Oracle and Patches that we use in the system, we used a workaround that detects the polygons with holes and uses the SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE' operator in those case. We saw a slight decline in performance but it now returns the right results. When the system will be patched, we'll come back to the original version and see if the problem is solved.

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

I am having problems sending emails when using apps. I dont receive any emails when I try to send documents such as pdf or pictures. I tried sending it to my other email account but I don't get any email. What is wrong?

I am having problems sending emails when using apps. I dont receive any emails when I try to send documents such as pdf or pictures. I tried sending it to my other email account but I don't get any email. What is wrong?

System Preferences > Network > your-connection-medium > (Assist me) > ( Diagnostics )
This sometimes provides additional helpful information, sometimes not so much.

Is there an adapter or something you can use on a iPhone 5 that will let you watch video when using an AUX cable?

Is there an adapter or something you can use on a iPhone 5 that will let you watch video when using an AUX cable?

if you by AUX mean composite or component then likely not as they would not be able to support a high enough resolution to do any type of airplay mirror
hdmi should work though
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
there is also the vga version but vga don't carry audio so it may not be that fun
http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter

Problem: Uploading Video To iPod

Ok here's the issue. 8 times out of 10 when I connect my iPod via USB, it does not give me the option to upload video to my iPod. I would click on the "iPod Options" where you can select Automatically update this and that... and I only see four standard options (Music PodCast Contacts Notes). 2 out of 10 times, it would give me the other options (Photos Videos) and then I can upload videos no problem. But the majority of time, it does not give me this option. I have to continue to remove the iPod from the USB repeatedly until I luckily happen to land on a time when it will allow me to upload video.
And when, during that 8 out of 10 times when I don't get the option to upload video, it removes all video from the iPod so I can no longer view them! How can I get this thing consistant!
Why is this happening? How can I get this thing to be consistant in allowing me to upload videos?

hiya!
... okay ... this might be a symptom of a USB connection issue. if your USB connection is flaky to precisely the right degree, itunes can sometimes actually see a video ipod (or a nano) ... but it misidentifies it as an earlier version of ipod (without some of the capabilities of the nano, or the video ipod). sometimes, for example, this can cause the photo tab to go missing in the ipod preferences in itunes.
does the ipod icon in the itunes sourcelist look any different during the times you do get video capability from the times when you don't? if so, you might have one of these weird misidentification issues.
if so, some of the general ipod/USB-troubleshooting techniques might be useful:
Using USB to connect iPod
Tips for charging iPod and connecting to your computer
love, b

Upload video by using jsp/servlet

I'm using jsp/servlet to upload video file but I have a problem.
This error occurs for preparing SQL statement when I cast OraclePreparedStatement.
It is " Error : weblogic.jdbc.rmi.SerialPreparedStatement
at jsp_servlet._upload._jspService(_upload.java:185)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:263)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2390)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:1959)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)"
Please help me asap.
Thanks

You need to use the Oracle jdbc driver. Apparently, the Weblogic JDBC driver is being selected:
weblogic.jdbc.rmi.SerialPreparedStatement
The Oracle JDBC classes can be found in <ORACLE_HOME>/jdbc/lib/See <ORACLE_HOME>/jdbc/readme.txt for how to specify the correct class path in the application.
I would have thought that the oracle JDBC driver would have been selected (if in the classpath) or an exception would be raised if the Oracle JDBC driver was not found.... because the code should include:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
This should load the Oracle jdbc driver and classes, not the weblogic ones. IF the Oracle JDBC drivers are not found, an exception should be raised...

Problem - upload video

Howdy Everybody,
I had problem with Sharepoint Server 2013 when I was upload video (3mb).
ID: 0289b79c-fdf3-40d0-fae9-6033a32bd938
Category: Authentication Authorization, Logging Correlation Data, Monitoring
[Forced due to logging gap, cached @ 09/11/2014 17:24:19.52, Original Level: Verbose] {0}
0289b79c-fdf3-40d0-fae9-6033a32bd938
Authentication Authorization ajmmt
High [Forced due to logging gap, Original Level: VerboseEx] SPRequestParameters: AppPrincipal={0}, UserName={1}, UserKye={2}, RoleCount={3}, Roles={4}
0289b79c-fdf3-40d0-fae9-6033a32bd938
b4ly High
Leaving Monitored Scope (SPSqlClient). Execution Time=1593.97577066359
0289b79c-fdf3-40d0-fae9-6033a32bd938
can anyone help me please?
Thanks,
Lucas

Hi Lucas,
Based on your description, I recommend to verify the things below:
Check if you have permission to upload documents to the library.
Check if the file type of the video is blocked in SharePoint. Go to Central Administration > Security > Define blocked file types under General Security > check if the file extension of the video is added in the file types.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problem uploading videos when using Cutetube.

Similar Messages

Maybe you are looking for