Problem using export_to_excel package

I have downloaded the export_to_excel package from Denes and followed the instructions very carefully. However, everytime I click the link created I get the following error in cell A1 of the XLS file created.
Report Header Error: ORA-01403: no data found / 100
I have tried with several different reports and get the same results each time. Below is one query I have tried with.
select item_no
, description
, price
, cost
, sales
, weekly_avg
, lead_time
, k_rec_level
, over_ride
, final_level
, qty_on_hand
, sales_alloc
, qty_on_order
, reorder_qty
, order_dollars
, total_reorder_dollars
, onhand_value
, onorder_value
, over_target
from TABLE(select forecast(to_date(:P20_START_DATE,'mm/dd/yyyy')
, to_date(:P20_END_DATE,'mm/dd/yyyy')
, :P20_INV_OWNER
, :P20_WEEKS_ON_HAND) as forecast_tab from dual)
Any help would be appreciated.
Scott

Scott,
I have never tried to run the package with table functions. Have you tried to create a view
on your table function and than query the view instead? That may give you the expected
result.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Similar Messages

Problem using the package Admin_Optimize.dtsx

Hi, I am trying to use the package Admin_Optimize.dtsx but everytime that i ran it it fails, i try to openend with BIDS but i am unable to edit it, any advice that how can i use this package? or where can i find documentation related to this package? and how can i edit or modify it?, I appreciate your help.

Hi, Harish.
This is the situation The optimize works fine if I set it to "Lite." but it fails if It's a full optimize with compress turned on. I got the error in the Package log:
TOTAL STEPS 1
1.Admin_Optimize: Failed in 363 sec.
[Selection]
Application=BP_Detail,Reporting,National_Plan
OPTIMIZEOPTION=Yes
COMPRESSDATABASE=Yes
DEFRAGMENTINDEX=Yes
OptimizeMinWBCount=1000
[Messages]
[Error][Osoft.Services.Application.OptimizeManage.OptimizeManagerCtrl]

Problems using DBMS_PIPE package

Hi! Im using the SQL Navigator for Oracle to develop PL/SQL code and now I've got a problem with the DBMS_PIPE package. When i use the methods like create_pipe etc. in a normal pl/sql window it works without problems. But when i place such a DBMS_PIPE.CREATE_PIPE... call into a function in my own pl/sql package there's the error PLS-00201: identifiere 'sys.dbms_pipe' must be declared!
what do i have to do to use the dbms_pipe package in a package developed by my own.
thanks in advise
Ingo

login to your SYS schema and grant execute on the DBMS_PIPE package to the oracle user under which you
are creating your PL/SQL procedure:
SQL> grant execute on SYS.DBMS_PIPE TO <username> ;

Jar File Problem Using External Packages

I am having problems creating an Executable jar file that imports classes from my own package.
I can create an exe jar no problem without using any external packages, but when I use an external package the jar will not execute.
I am using WindowsXP, my package is in,
C:/MyClasses/Database
the class files are stored loose, not in a jar file
I have tried altering the class-path in the manifest file, but to no joy - I may have not changed the classpath correctly!
Please help
Magic

This is a mine field of "correct programming style."
External jars, if very general, could be placed in the directory jre/lib/ext.
In some cases you can unzip the external jars and add them to your own jar.
The manifest.mf migth be looked into, and of course you need to communicate your patching!
As you remarked, it might be a problem of class path usage.
For that the jar tool documentation might explain it better than I.

Sincere Eclipse 3.0.2 build problems using a package for all Eclipse Java p

Hi,
I had the following problem:
- jar-file put into a directory (for jdbc-access)
- Environment variable set in Window/preferences/Java/BuildPath/ClassPathVariables:
Name: classpath (could be any other name, does not correlate with WIN env. var.)
Path: C:\java\eclipse\jars\mysql-connector-java-3.1.8-bin.jar
- class-file was automatically built by Eclipse, error message:
�. java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
In Windows I set the classpath environment variable to
classpath=.;C:\java\eclipse\jars\mysql-connector-java-3.1.8-bin.jar
In Windows/i.e., a DOS-Shell. It works
As it didn�t work in Eclipse, I deleted Eclipse and installed it again (from an elder version I had on another workstation)
After starting Eclipse asked me to rebuild all -> Yes (it then needed some time to do so)
Then it worked
So, right here I thought I knew how to go on in other projects using this jar-file, but:
The same problem appears in another project, but it works in WIN/DOS command line, but not in Eclipse. Project/Clean und rebuilding automatically or manually doesn�t help.
As a workaround for this project I did in
Project/Properties/Java/BuildPath/Projects I marked a link to the project where it works (see above), and now it works, too.
But I am not satisfied, I don�t like trial and error solutions.
I suppose that Project/Clean doesn�t really clean properly.
Has anybody made similar experience and knows the real solution?
Thanks
Michel

JediKnight wrote:I didn't find it in AUR
What search term did you use?? Here is monodevelop-git already in the AUR.
It seems it may have been abandonded, but perhaps you could take over that package rather than starting a new one.
Additionally, a patch is applied in that PKGBUILD. Perhaps that could be needed to solve your problem.

Receiver email encoding problem using mail package

Hi to all.
I'm facing a email problem. My company email server is workig fine with emails subject but customers email server is making some strange changes when i use special characters such as 'á' or spanish letter 'n with a tail on the top'.
I set the field 'Content_Type' of the email to 'text/plain; charset=ISO-8859-1' but isn't working. If i remove those special chars, the subject is OK.
I also tried to add content conversion in the receiver email adapter in module tab but with no possitive results.
I'm using SAP PI 7.0 sp14.
Any idea of what is happening?
Kind regards,
Inigo.

If you want to use non-ascii characters in email subject, then you have to apply a special notation for this, like follows:
=?utf-8?Q?Auftragsbest=C3=A4tigung?=
This is email standard. So I recommend not use non-ascii characters in email subject.
Regards
Stefan

I am having problems using Numbers package, unable to add specific cells in a column, when I tap "sum" it totals the whole column, rather than the specific cells I want. Would appreciate any help. Thank You Francis

I am having a problem with adding selected numbers in a column. When I select "sum" the whole column is added, not just the selected cells. I would appreciate any help how to rectify? Many thanks. Francis Anthony

I don't know if this is the best way but it's pretty easy.
1.) Select the cell you want the sum in.
2.) Select the sum function
3.) In the line where you see =sum(B2:B8) using your finger tap the B2:B8
4.) Use the backspace key to delete the B2:B8 and it will then show "value"
5.) You can now tap any cell you want in the sum
6.) When finished tap the green check mark button at the end of the sum line.
That pretty much sums it up.
Good luck.
Steve

Problem Using UTL_FILE package ORA-29285

Dear All,
I would very much appreciate your help.
I am trying to export data form a table.
The version of the DB is 10.2.0.4
I am using the following procedure:
create or replace
procedure EXPORT_FRAME(
dir IN VARCHAR2, filename IN VARCHAR2) IS
f utl_file.file_type;
cursor frame is
    Select *
    from test_complete_frame_2008;
begin
f:= utl_file.fopen (dir, filename,'w');
FOR a IN frame
Loop
    utl_file.put_line (f,
        '"'||a.COM_DATA_ID || '";"' ||
           a.COM_DATA_SET_ID || '";"'||
            a.NSI || '";"'||
            a.FRAME_ID || '";"'||
            a.STATUS_FRAME || '";"'||
            TO_CHAR(a.FRAME_REFERENCE_DATE, 'dd/mm/yyyy') || '";"'||
            TO_CHAR(a.DATE_OF_SELECTION, 'dd/mm/yyyy') || '";'||
            a.EU_LEU_ID || ';"'||
            a.NSA_ID || '";"'||
            a.SOURCE_IDENTITY || '";"'||
            TO_CHAR(a.REF_DATE_LEU_IDENTITY, 'dd/mm/yyyy') || '";"'||
            a.NATIONAL_ID || '";"'||
            a.REF_DATE_NATIONAL_ID || '";"'||
            a.DUNS_NUMBER || '";"'||
            TO_CHAR(a.REF_DATE_DUNS_NUMBER, 'dd/mm/yyyy') || '";"'||
            a.BVD_ID || '";"'||
            TO_CHAR(a.REF_DATE_BVD_ID, 'dd/mm/yyyy') || '";"'||
            a.NAME_LEGAL_UNIT || '";"'||
            a.LEGAL_FORM_EGR || '";"'||
            a.SOURCE_LEGAL_FORM || '";"'||
            TO_CHAR(a.REF_DATE_LEGAL_FORM, 'dd/mm/yyyy') || '";"'||
            a.TYPE_OF_LEGAL_UNIT || '";"'||
            a.SOURCE_CODE_TYPE_OF_LEU || '";"'||
            TO_CHAR(a.REF_DATE_TYPE_OF_LEU, 'dd/mm/yyyy') || '";"'||
            a.STATUS_LEU || '";"'||
            a.SOURCE_CODE_STATUS_LEU || '";"'||
            TO_CHAR(a.REF_DATE_STATUS_LEU, 'dd/mm/yyyy') || '";"'||
            a.POST_DELIVERY_POINT || '";"'||
            a.CITY_NAME || '";"'||
            a.POSTAL_CODE || '";"'||
            a.STATE_NAME || '";"'||
            a.COUNTRY_CODE_BOP || '";"'||
            a.COUNTRY_ACCESS_CODE || '";"'||
            a.TELEPHONE_NUMBER || '";"'||
            a.FAX_NUMBER || '";"'||
            TO_CHAR(a.DATE_OF_INCORPORATE, 'dd/mm/yyyy') || '";"'||
            a.SOURCE_DATE_OF_INCORP || '";"'||
            TO_CHAR(a.REF_DATE_DATE_OF_INCORP, 'dd/mm/yyyy') || '";"'||
            TO_CHAR(a.DATE_OF_LIQUIDATION, 'dd/mm/yyyy') || '";"'||
            a.SOURCE_DATE_OF_LIQ || '";"'||
            TO_CHAR(a.REF_DATE_DATE_OF_LIQ, 'dd/mm/yyyy') || '";"'||
            a.NACE_CODE || '";"'||
            a.VERSION_NACE || '";"'||
            a.SOURCE_CODE_NACE || '";"'||
            TO_CHAR(a.REF_DATE_NACE, 'dd/mm/yyyy') || '";"'||
            a.NUMBER_PERS_EMPLOYED || '";"'||
            a.SOURCE_CODE_PERS_EMPL || '";"'||
            a.CONS_PERSON_EMPLOYED || '";"'||
            TO_CHAR(a.REF_DATE_PERS_EMPLOYED, 'dd/mm/yyyy') || '";"'||
            a.SPECIAL_PURP_ENTITY_CODE || '";"'||
            a.SOURCE_CODE_SPE || '";"'||
            TO_CHAR(a.REF_DATE_SPE_CODE, 'dd/mm/yyyy') || '";"'||
            a.EMAIL_ADDRESS || '";"'||
            TO_CHAR(a.REF_DATE_EMAIL_ADDRESS, 'dd/mm/yyyy') || '";"'||
            a.WEB_ADDRESS || '";"'||
            TO_CHAR(a.REF_DATE_WEB_ADDRESS, 'dd/mm/yyyy') || '";"'||
            a.P_EU_LEU_ID || '";"'||
            a.P_NAME_LEGAL_UNIT || '";"'||
            a.P_COUNTRY_CODE_BOP || '";"'||
            a.STATUS_RELATIONSHIP || '";"'||
            a.PERCENTAGE || '";"'||
            a.KIND_OF_CONTROL || '";"'||
            a.SOURCE_CODE_RELATIONSHIP || '";"'||
            TO_CHAR(a.REF_DATE_RELATIONSHIP, 'dd/mm/yyyy') || '";"'||
            a.GLOBAL_LEVEL || '";"'||
            a.GGH_EU_LEU_ID || '";"'||
            a.GGH_NAME_LEGAL_UNIT || '";"'||
            a.GGH_COUNTRY_CODE_BOP || '";"'||
            a.GGH_NSA_ID || '";"'||
            a.GGH_DUNS_NUMBER || '";"'||
            a.GGH_BVD_ID || '";"'||
            a.GGH_SOURCE_IDENTITY || '";"'||
            a.GLOBAL_EG_ID || '";"'||
            a.GLOBAL_EG_NAME || '";"'||
            a.TOP_MNE_IND || '";"'||
            a.GEG_PERSONS_EMPLOYED || '";"'||
            a.GEG_SOURCE_CODE_PERS_EMPL || '";"'||
            TO_CHAR(a.GEG_REF_DATE_PERS_EMPL, 'dd/mm/yyyy') || '";"'||
            a.NUMBER_OF_LEGAL_UNITS || '";"'||
            a.GEG_NACE_CODE_DIV || '";"'||
            a.GEG_SOURCE_CODE_NACE || '";"'||
            TO_CHAR(a.GEG_REF_DATE_NACE, 'dd/mm/yyyy') || '";"'||
            a.GEG_CONS_TURNOVER || '";"'||
            a.GEG_VALUTA_CONS_TURNOVER || '";"'||
            TO_CHAR(a.GEG_BEGIN_CONS_TURNOVER, 'dd/mm/yyyy') || '";"'||
            TO_CHAR(a.GEG_END_CONS_TURNOVER, 'dd/mm/yyyy') || '";"'||
            a.GEG_SOURCE_CONS_TURNOVER || '";"'||
            TO_CHAR(a.GEG_REF_DATE_C_TURNOVER, 'dd/mm/yyyy') || '";"'||
            a.GEG_TOTAL_ASSETS || '";"'||
            a.GEG_VALUTA_TOTAL_ASSETS || '";"'||
            a.GEG_SOURCE_TOTAL_ASSETS || '";"'||
            TO_CHAR(a.GEG_REF_DATE_TOTAL_ASSETS, 'dd/mm/yyyy') || '";"'||
            a.GEG_WEB_ADDRESS || '";"'||
            a.GDC_EU_LEU_ID || '";"'||
            a.GDC_NAME_LEGAL_UNIT || '";"'||
            a.GDC_COUNTRY_CODE_BOP || '";"'||
            a.GDC_NSA_ID || '";"'||
            a.GDC_DUNS_NUMBER || '";"'||
            a.GDC_BVD_ID || '";"'||
            a.GDC_SOURCE_IDENTITY || '";"'||
            a.REP_EU_LEU_ID || '";"'||
            a.REP_NAME_LEGAL_UNIT || '";"'||
            a.REP_POST_DELIVERY_POINT || '";"'||
            a.REP_POSTAL_CODE || '";"'||
            a.REP_STATE_NAME || '";"'||
            a.REP_CITY_NAME || '";"'||
            a.REP_COUNTRY_CODE_BOP || '"'
       UTL_FILE.new_line (f);
END LOOP;
UTL_FILE.new_line (f);
UTL_FILE.fclose(f);
    EXCEPTION
      WHEN NO_DATA_FOUND
        THEN dbms_output.put_line ('FAILED');
END EXPORT_FRAME;I get an error message:
Error starting at line 1 in command:
begin EXPORT_FRAME ('EXP','test2.csv'); end;
Error report:
ORA-29285: file write error
ORA-06512: at "SYS.UTL_FILE", line 136
ORA-06512: at "SYS.UTL_FILE", line 813
ORA-06512: at "EGR.EXPORT_FRAME", line 13
ORA-06512: at line 1
29285. 00000 - "file write error"
*Cause:    Failed to write to, flush, or close a file.
*Action:   Verify that the file exists, that it is accessible, and that
it is open in write or append mode.
Any idea?
Thanks in advance!

By default UTL_FILE.FOPEN opens file with record size up to 1024 characters (including newline). Most likely your code exceeds 1024. Change:
f:= utl_file.fopen (dir, filename,'w');to something like (assuming none of your records will exceed 10000)
f:= utl_file.fopen (dir, filename,'w',10000);SY.

Problem in Using Utl_Http package

Hi to all,
I'm trying to send the sms(Short Message Service) using utl_Http package. When I'm trying to run a sql statement like
SELECT utl_http.request('http://www.oracle.com/index.html') FROM dual
I'm getting an error message like this.
The following error has occurred:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1577
ORA-12545: Connect failed because target host or object does not exist
ORA-06512: at line 1
Pls help me to solve this problem.
Regards,
Alok Dubey

Thank you for ur reply. Infact my database was not able to access the internet. currently, it is working fine.
I'am using this code. It's works well.
CREATE OR REPLACE PROCEDURE Send_Sms_Http
AS
text_str VARCHAR2(5000);
V_Message VARCHAR2(200) := REPLACE('This is a DEMO SMS sent to u on '||TO_CHAR(SYSDATE,'DD/MM/RRRR HH12:MI:SS AM'),' ','%20');
text_sms VARCHAR2(5000) := 'http://hapi.smsapi.org/SendSMS.aspx?UserName=xxxx&password=xxxx&MobileNo=xxxx,xxxxx&SenderID=xxxx&CDMAHeader=xxxxx&Message='||V_Message;
BEGIN
text_str := utl_http.request(text_sms);
Dbms_Output.Put_Line('text_str = '||text_str);
EXCEPTION
WHEN OTHERS THEN
Dbms_Output.Put_line('Error in sending the message'||SQLERRM);
END;
Regards,
Alok Dubey

Problem to use J2EE Packages in Forte 3.0 CE IDE

I've got problems in using J2EE Packages in Forte for Java CE 3.0.
I can't use these Packages with the Forte IDE!
Example: import javax.jms.*;
The Error: Can't find javax.jms.* Package
What can I do to use the J2EE Package in the J2EE.jar?

I post it so often, with a little bit different titles, cause the chance anybody helps looks better. Many People gave me so much help - but in so many different ways. So I changed the title of my Problem!
I thank you for your support and help
Bye

Problems with the packager using J2sdk 1.4.2

Hi all,
when I try to use the packager, I always get this message:
C:\proc\cas\classes>packager cas.jar CasFrame
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-client to select the "client" VM
-server to select the "server" VM
-hotspot is a synonym for the "client" VM [deprecated]
The default VM is client.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
Die IDL-Datei konnte nicht erstellt werden..
(The IDL couldn't be created)
I did all the stuff released at the ActiveX developer guide on
http://java.sun.com/j2se/1.4.2/docs/guide/beans/axbridge/developerguide/index.html
Has anyone an idea, how I can fix this?
Might it be a problem, that I also use JBuilder 8.0 which ordinary uses Java 1.4.1?
regards
Tom

Oh no, I tried to get a run for a whole day... now I got it. It was always a mistake in the CLASSPATH. Stupid :-)

Conn problem SQl Server 64 Bit to Oracle 32 bit using SSIS packages

Hi,
I am facing the problem with connection SQL(64 bit) to Oracle(32 bit).
Please give me the solution/guide in right direction.
Environment is
S1-----> DBServer : 64 bit Windows Server 2003 Enterprise Edition, 64 Bit SQl Server EE, 64 Bit Oracle 10g Client
S2----->.AppServer :32 bit Windows Server 2003 Enterprise Edition, IIS, 32 Bit Oracle 10g Client & Server DB
I have doubt like....
1.Can i install 32 bit oracle also at (S1) 64 bit SQL Server(SSIS)
or only 64 bit oracle?
2.Running command line for SSIS packages at S1
i am unable to connect S1---->S2 using SSIS packages?
How can i solve this problem? pl give steps for going right direction.
Thanks
JOHN
[email protected]

Fabio D'Alfonso wrote:
Hi,
I was setting up VMware vCenter 4.1 (probably the only well known and largely used product with this lethal mix) and needed to setup an ODBC access to Oracle on the 32 bit side of Windows to setup the Update Manager server component, which is still a 32 bit application)
The problem with Oracle configuration is that in no way I found a 32 bit ODBC registered driver after the setup (of the 32 bit client and the 64 database server). I tried some third party driver for oracle (e.g. easysoft).They registered in the 32 bit ODBC manager but they never got a successful connection.
Also if this vCenter requirement is questionable (more questionable considering that the setup of this 32 component is not allowed on a 32 separate OS, not because it is separate but because is a 32 bit OS) I would get it working.
Could suggest a way to get this working?
Thanks
Fabio D'AlfonsoWhen you install the Oracle client software on Windows (which is necessary to support ODBC, as the Oracle ODBC driver sits on top of the native client software) the ODBC driver is NOT installed by default. You have to go back and do a "custom" install and select the "Windows components".

Problem using File sharing in a small office network

I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdk

Well, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package.

How can I solve a Parse Error: "There was a problem parsing this package"

Hello;
I developed a really simple app in Flash Pro CC for android. I published it using AIR 13.0 for Android. When I tried to install it I received the Parse Error: "There was a problem parsing this package"
Im not sure if the problem has something to do with my app xml file, but here it is:
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://ns.adobe.com/air/application/13.0">
     <id>TOeatorNOTTOeat</id>
     <versionNumber>1.0.0</versionNumber>
     <versionLabel>TouchEvent</versionLabel>
     <filename>TO eat or NOT TO eat</filename>
     <description/>
     <name>TO eat or NOT TO eat</name>
     <copyright/>
     <initialWindow>
          <content>TO%20eat%20or%20NOT%20TO%20eat.swf</content>
          <systemChrome>standard</systemChrome>
          <transparent>false</transparent>
          <visible>true</visible>
          <fullScreen>true</fullScreen>
          <aspectRatio>landscape</aspectRatio>
          <renderMode>gpu</renderMode>
          <autoOrients>false</autoOrients>
     </initialWindow>
     <icon>
          <image36x36>icons/icon36x36.png</image36x36>
          <image48x48>icons/icon48x48.png</image48x48>
          <image72x72>icons/icon72x72.png</image72x72>
          <image96x96>icons/icon96x96.png</image96x96>
     </icon>
     <customUpdateUI>false</customUpdateUI>
     <allowBrowserInvocation>false</allowBrowserInvocation>
    <android>
          <manifestAdditions>
               <![CDATA[<manifest> </manifest>]]>
          </manifestAdditions>
     </android>
     <supportedLanguages>en</supportedLanguages>
</application>
What do you think is the best to check?

i don't see any problem with your manifest.
try saving your fla and the published files to a new directory and see if the error resolves.

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

Problem using export_to_excel package

Similar Messages

Maybe you are looking for