Problem using flash player
i download the newest version of flash but when i go to a website that needs flash it says i need to upgrade.. please advise . i uninstalled and installed 5 times already
What is your operating system & version?
What is your web browser?
What is your Flash Player version?
Similar Messages
-
Problems using Flash player 11.8.800.168 with Firefox 23.0.1 ?
I am trying to use Virtual Credit Card Number software with Firefox. I downloaded Flash Player 11.8.800.168 But when I try to open the Virtual Number software it continues to tell me to install Flash player. Any help out there?
Is this Virtual Credit Card Number software a website or a stand alone application? If stand alone, then I would recommend installing the Active X (Internet Explorer) version that you can download here: http://get.adobe.com/flashplayer/otherversions
-
Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer
There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/
-
I encountered a problem when using Flash Player V9.0.115, can somebody help me?
Hello all, can somebody help me?
I have encountered a problem when using Flash Player
V9.0.115. Your help would be greatly appreciated.
The problem described as follows:
1. The flash file with sound works well before uploaded to
website. The audio lost when uploaded to the website(There is no
problem with the flash file size). I have uploaded the flash file
to website for you to test. Please go to
http://www.sameshow.com/democreator/create
a new site.swf and kindly check with it.
2. When we open the flash movie in IE with Flash player
V9.0.47 and previous versions (Flash9d.ocx), the flash movie with
sound works well.
3. When we upgrade the flash player to the latest version
V9.0.115 (Flash9e.ocx), the video works well, but the sound just
can play several seconds and then stop.
4. On Flash Player ocx V9.0.115. If we publish the flash
movie on web with 24fps, the sound just can work several seconds
and then stop, the problem is the same if we use the
TShockWaveFlash control to play the flash movie.
5. On Flash Player ocx V9.0.115. If we publish the flash
movie with 12fps, the sound works well but the quality is really
very poor. It seems that the sound plays shorter with more frames
per second. But the flash file works well with the Flash Player
V9.0.47 and previous versions (Flash9d.ocx).
Can somebody help me to figure it out? Thanks in advance!
Regards,
Sabrina
[email protected]Hello Darren, I really appreciate your response. My mail is
[email protected] I have uploaded the flash file to our
ftp,
http://www.sameshow.com/democreator/create
a new site.swf. And also I compressed the original file to a
zip file and uploaded to our ftp at
http://download.sameshow.com/aff/create.zip,
please kindly check! When we playing this flash file on FlashPlayer
V9.0.47 and previous, the audio works well. But the audio just can
play several seconds and then stop when I playing it on FlashPlayer
V9.0.115. The garbled audio makes us very upset. Your help would be
great appreciated!
Sabrina Fu -
I'm having problems when Firefox 5 uses Flash Player.
Whenever the browser uses Flash player ''(ex. Facebook games)'', my browser becomes so slow, that even opening a new tab takes time to load.
One more thing, whenever I watch videos from youtube, although the buffer is finish, the video is choppy.
Any solutions with this?No solution but some general comments
It may be worth disabling firebug, and any other unnecessary extensions, also consider any other background tasks, for instance is the computer indexing drives, or doing other downloads or security scans.
Experiment with hardware acceleration on and off, in both firefox prefs, and FlashPlayer settings. Ensure any video drivers are up-to-date.
Do you need the multiple java consoles, and is there any possibility skype may slow things down ?
It may be worth considering a new separate profile just for flashplayer gaming. -
Wife has an older MacBook Pro. when an app uses flash player "Blocked plugin" comes up. I don't know much about mac, tried to update flash player and get newer version already installed, and update and still get same message. How do I uninstall flash player and reinstall?
Sounds like it is blocked for the website you are at. Check with this:
You can quickly test whether a recently added plug-in is causing problems by blocking it.
Choose Safari > Preferences, click Security, then click Website Settings next to Allow Plug-ins.
Select the plug-in you want to disable on the far left, then click each pop-up menu on the right and choose Block.For some plug-ins, you see pop-up menus for different websites, and you can choose to block each one individually. Use the “When visiting other websites” pop-up menu to block all other websites that don’t have individual settings. -
I can only use Flash Player in one tab at a time, only on Firefox.
Recently, when I downloaded the new Flash Player, I can only use flash player in one tab at a time. This is only in firefox. I'll open youtube, and the visual and sound both play perfectly. I open up a new tab, begin using a flash website in that tab, and the youtube sound is quiet, only the visual continues to play. I need to multitask with flash sometimes, and this is a big problem for me. Help!
By default, Flash 11.3 and higher will spin up a lot of distinct processes. You should be able to get quite a cacophony going.
Have you ever done any troubleshooting that involves changing how Firefox works with plugin-container.exe or the Flash player's protected mode?
Often it is helpful to disable hardware graphics acceleration in Firefox and in Flash:
(A) In Firefox, un-check the box here and restart:
orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
Unrelated, but you can remove the Java Console extensions unless you are a Java developer (and even then, you probably don't need the old ones):
orange Firefox button (or Tools menu) > Add-ons > Extensions category -
High cpu usage when using flash player
Hi,
Just updated to Mavericks and now I'm having very high cpu usage while watching streams using flash player. CPU usage is somewhere around 110% and after a moment the stream starts to lag and fps is slowing down. I also tried using Chrome but with no difference. Flash player is the newest version 11.9.900.117.
Any ideas on how to fix this?i think its the best to hit the report a problem button in safari, since its appears since i updated safari to 5.1.4! maybe they make a additional update
-
So I'm having a problem with flash player, and was wondering if anyone has experienced the same thing, or might be able to help.
- Upgraded 2 computers to snow leopard, macbook pro laptop, and mac Pro tower (intel proc).
- Laptop has no problems, everything renders fine, and without any difficulty.
- Mac Pro doesn't display any dynamic data, text fields show up blank, some flash player controls don't work, brightcove player won't load completely... things are just not working right.
- Main browser is Safari, but same problem exists in Camino, Firefox, etc...
- I've had Safari Stand installed, but have since removed it.
- I've removed GROWL notifications completely
- I've got debug and developer menus turned on (but have that with the laptop also.)
Please see the screenshot attached. This graph should have text data on it showing the x/y axis, the key, as well as data when you mouse over each block, but doesn't show anything.
The second screen shot shows a brightcove player from our website... There should have full controls at the bottom, and nothing shows up. If I right-click, and go to 'view full screen', I can't then get out of full screen by clicking escape key on the keyboard, I have to use any player controls, or right-click again, and hit 'exit full screen'.
Anyone have any suggestions? It's something to do with my computer, rather than snow leopard, because flash works fine on my laptop, but not on the desktop. Any help is really appreciated !Hi!
I reached your post because I was having the exact same issues as you and I found a fix that worked for me! The problem is a font issue: I logged in with the guest account that had no users font installed and flash was working fine, so I logged back into my account and moved all the fonts in my 'User>Library>Fonts' folder in a folder in the desktop. Then I closed and reopened Safari and Flash was working!
In the end the problem was with a version of Arial that I had in my users' font folder: I deleted just that, put my users' font back in the folder and the problem disappeared.
I hope it hepls!
best
nicola -
Intermittant problems with Flash Player 7 and 8
Good morning,
While "stress testing" a recent Captivate 2 generated quiz
lesson, one of our testers noticed some odd behavior. (Granted,
most students will not do the following actions, but I thought I'd
mention it anyway.)
First let me add that we use a LMS and that this behavior
might have something to do with the LMS, but I suspect the problem
might be in how Flash Player 7 and 8 handle viewing a SWF file.
The tester would start the quiz, answer a few questions, then
close the session (before the conclusion of the quiz). The tester
(student) would then (through the LMS) go to the quiz/lesson link
and begin again. The Quiz behaviors are that the student can't go
back to any question they have already answered. In theory the
student would go back to the next unanswered question and continue
with the quiz.
The first time this is done, everything appears to work well.
However, if the same student behavior is done again, when the
quiz/lesson is re-launched the student is taken to the very first
slide, not the one where they left off. If they go to the first
question slide they will find that it appears to be unanswered. The
student then tries to answer it and nothing happens, nore can the
student move to the next question. They are "stalled" and can go no
further. Any subsequent attempt to re-enter the quiz produces the
same effect. Additionally, if this is done without restarting the
computer the browser (Internet Explorer) will hang and they'll need
to stop the process.
I found that in Captivate 2 you have 3 options for building a
solotion when you publish a project. You can publish using Flash
Player 6, 7 or 8. Only by selecting Flash Player 6 does this
behavior stop. The Flash Player 6 selection seems to work well.
Anyone else had problems with FlashPlayer 7 and 8?Flash Player 11 sends the getServerVersion request in order to determine the capabilities of the Flash Access license server. If you are running a 2.0 server, it should return an HTTP 404 error, since it does not support this endpoint. The client understands that to mean it is communicating with a Flash Access 2.0 server, and will send the license request accordingly. In other words, the fact that your 2.0 server does not support getServerVersion should not cause the license acquisition to fail.
Is your server responding to the getServerVersion request with a 404? After the getServerVersion request arrives at your server, you should see another request asking for a license. In your server logs, do you see any errors in the license request processing? -
Video Player Component using Flash Player 6
I'm streaming video using Flash Player 6. The problem I am
having is that the video will only play at a super small size,
something like 180 x 60 (that's a guess). Is there a way to play
the video at the 320 width that I redered it as?
I'm using Flash Player 6 because some code that came with my
purchased Flash Template does not work unless it's published to
Flash Plaey 6.
Thanks in advance!Hello Melissa,
I might not be understanding the question right, but if you
are using Flash
Player 6, and the Flash Player 6 video player component, you
can resize the
video by resizing the component on the stage (just drag and
make it larger).
Let me know if that works for you.
Jesse H.
Adobe Community Expert
My site:
http://www.jharding.com
Free Blog Radio:
http://www.tornadostream.com
> I'm streaming video using Flash Player 6. The problem I
am having is
> that the
> video will only play at a super small size, something
like 180 x 60
> (that's a
> guess). Is there a way to play the video at the 320
width that I
> redered it as?
> I'm using Flash Player 6 because some code that came
with my
> purchased Flash
> Template does not work unless it's published to Flash
Plaey 6.
> Thanks in advance! -
Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
When i use flash player my computer restarts ?
when i use flash player my computer restarts ? i turn off Hardware Acceleration but now i can't play game in full screen. what is the problem and please told me the solution.
What is your operating system & web browser?
-
Video Pixelation occurs while recording the video using flash player
Hello,
I am recording the video using flash player 9 ( using the
flash media server 2.0 on the back end). Everything used to work
fine in the past. The quality of the flv video was good. Now
suddently, I have started seeing the pixelation in the recorded
video (very poor video quality). Nothing has been changed in the
code. However on the server side, I am not very sure if there is
any windows update has taken place and have caused the problem with
the codec on server.
However my understanding is that when we record the video
then flash player use its own codec not the flash media server.
Can any one help me on how I can get rid of pixelation
issues?
Thanks for your help.
Best Regards
PradeepHello Melissa,
I might not be understanding the question right, but if you
are using Flash
Player 6, and the Flash Player 6 video player component, you
can resize the
video by resizing the component on the stage (just drag and
make it larger).
Let me know if that works for you.
Jesse H.
Adobe Community Expert
My site:
http://www.jharding.com
Free Blog Radio:
http://www.tornadostream.com
> I'm streaming video using Flash Player 6. The problem I
am having is
> that the
> video will only play at a super small size, something
like 180 x 60
> (that's a
> guess). Is there a way to play the video at the 320
width that I
> redered it as?
> I'm using Flash Player 6 because some code that came
with my
> purchased Flash
> Template does not work unless it's published to Flash
Plaey 6.
> Thanks in advance! -
Problems installing flash player. Learner
I am experienceing problems installing flash player. I go to the adobe website and install the program and I am told it has been successfully installed. No flash player icon apppears on my desktop. When I press the windows start icon and click on "all programs" there is no evidence of the flash player. However when I click on" my computer" icon and go into uninstall/change the flash player program is there.I have spent quite some time installing, uninstalling and installing again without success
I am using windows Vista. I am also using Kaspsersky Internet security. It is a private computetr so I do not think I need administrators permission. I have tried installing flash player using both interner explorer and Mozilla firefox.Please can anyone help. Many thanks.Shane, since you must be having problems getting a thread started, I'll just go ahead and try to help you here.
Use IE and go to Help and click on About Internet Explorer. It should tell you sp1 or sp2.
Also using IE, go to Tools, click on Manage add ons and look in all add ons for Shockwave Flash Object. Let me know if it is Enabled and if it is version 10.0.45.2 or says Flash10e.ocx.
Then switch over to FF (Firefox) and find the plug-in SWF version 10.0.45.2 and make sure it is listed and Enabled.
Post this info back to me.
Thanks,
eidnolb
Maybe you are looking for
-
PDF created with InDesign CS6 on Mavericks not legible in other systems
Recently migrated to a new MAC with Mavericks, now after creating PDF files and sending them to clients, some are able to view the file correctly and others are not? Any help will be appreciated.
-
FAQ Broken: How do I upgrade the firmware on a WRT54G Wireless-G Broadband Router?
I tried to view the above question in the FAQ, but it goes to the answer for a different question. I then tried "How do I upgrade the firmware on my router?" a little further down, but it acts like I'm not authenticated, and won't accept my Linksys F
-
Deploy JDBC drivers - SAP PI 7.0
Hi guys, I have to deploy JDBC drivers to implement JDBC adapter in SAP PI 7.0. I've found some guides for XI 3.0 or SAP PI 7.1 but not to SAP PI 7.0. Can I apply guide for XI 3.0 or another exists? Best regards, Pablo
-
Question about static properties in implementation (.m) file
I've been using some static properties in my implementation files so they can be accessed by class methods like so for example: #import etc static Class foo; // <-- Here is where I've been defining static properties @implementation Bar - init { foo =
-
Transferring Software from old to new computer
Hi, Just wondering if/how I can transfer my Adobe C6 Master Collection and Lightroom from my current iMac to a new Imac I wish to purchase, will license work on new one, I have no need for it on old one after...