Problem using game-related applications behind lynksis wrt54g v8 router.

Hi everyone. As the topic states I'm having trouble with game-related applications. The thing is that after I added the router to the network so my sister could have Internet connection, my two main game-related apps (Medal of Honor Heroes Dedicated Server & zbattle.net) stopped connecting successfully to some servers (ea nation: for moh account & www.zbattle.net for getting rooms for zbattle.net). Ironically, I can use zbattle.net from my sister laptop and can connect successfully using the wireless connection. I have forwarded the ports and used dmz twice, but nothing from my computer. ZBattle.net tells me there was an error connecting to the server and MoH heroes dedicated server tells me it could not connect to ea nation. Any help would be appreciated. Thanks in advance.

Here's a more detailed explanation of the problem and is up to date on the recent data I've gotten.
http://forums.zbattle.net/viewtopic.php?t=1434
Any help would be appreciated.

Similar Messages

RTSP steaming Port Forward (?) problems with 4 (four) WVC54GCA cameras on WRT54G v2 router.

I am having difficulties correctly setting up my four (4) WVC54GCA cameras on a WRT54G v2 router to make them stream RTSP videos that I can view on my BlackBerry Bold. I can access the cameras from the internet, through
http://CAM1_SubDomain.Linksys-Cam.com/1024
http://CAM2_SubDomain.Linksys-Cam.com/1025
http://CAM3_SubDomain.Linksys-Cam.com/1026
http://CAM4_SubDomain.Linksys-Cam.com/1027
so that part works fine.
All the 4 cameras are set up with static IP addresses.
The default RTSP port 554 and RTP Data port at 5000 are forwarded to CAM1 IP address. I can access CAM1 RTSP feed on my Blackberry Bold (and also on a good old Samsung SGH-A706 cell phone).
CAM 1 Settings:
STATIC IP: 192.168.1.201
Alternate HTTP Port: 1024 à Forwarded to 192.168.1.201
RTSP Port: 554 à Forwarded to 192.168.1.201
RTSP Data Port: 5000 à Forwarded to 192.168.1.201
RTSP access on cell phone WORKS only with the following format: rtsp://CAM1_SubDomain.Linksys-Cam.com/1111, where 1111 is the access code.
CAM 2 Settings:
STATIC IP: 192.168.1.202
Alternate HTTP Port: 1025 à Forwarded to 192.168.1.202
RTSP Port: 1029 à Forwarded to 192.168.1.202
RTSP Data Port: NOT SURE IF I NEED TO FORWARD ONE, HELP PLEASE
Despite I have a dedicated subdomain for each camera from TZO, the following link DOESN’T WORK
rtsp://CAM2_SubDomain.Linksys-Cam.com/1111, where 1111 is the access code.
Actually, when I enter the above link, the cellphone brings in the feed from CAM1, I guess due to the identical access code with CAM2. Once I change the access code for CAM2, it doesn’t’t show any feed.
CAM 3 Settings:
STATIC IP: 192.168.1.203
Alternate HTTP Port: 1026 à Forwarded to 192.168.1.203
RTSP Port: 1030 à Forwarded to 192.168.1.203
RTSP Data Port: NOT SURE IF I NEED TO FORWARD ONE HELP PLESE
Despite I have a dedicated subdomain for each camera from TZO, the following link DOESN’T WORK
rtsp://CAM3_SubDomain.Linksys-Cam.com/1111, where 1111 is the access code. This feed also brings in CAM1.
CAM 4 Settings:
STATIC IP: 192.168.1.204
Alternate HTTP Port: 1027 à Forwarded to 192.168.1.204
RTSP Port: 1031 à Forwarded to 192.168.1.203
RTSP Data Port: NOT SURE IF I NEED TO FORWARD ONE HELP PLEASE
Despite I have a dedicated subdomain for each camera from TZO, the following link DOESN’T WORK
rtsp://CAM4_SubDomain.Linksys-Cam.com/1111, where 1111 is the access code. This feed also brings in CAM1
DMZ could probably fix the problem for a second camera, but not for all four CAMs
OS: XP SP2
Question 1: Any idea how can I get all the four cameras RTSP feed on my cell/BlackBerry?
Question 2: I am running out of Port Range forwards. Should I add more port forwards, I have only one more shot. Any workaround?
Each and every help idea is greatly appreciated!

I have six of these cams and used the tutorial and review at http://www.Myhomserver.com for help. First thing, set ALL the RTSP access codes the SAME, so all you need to do is increment the port for each cam
Cam 1 - 192.168.1.200 - set at port 80 TCP - RTSP port default at 554, forward port 5000 UDP/TCP and the RTSP access code 12345
Cam 2 - 192.168.1.201 - set at port 1024 TCP - RTSP port at 1029, forward port 5001 UDP/TCP and the RTSP access code 12345
Cam 3 - 192.168.1.202 - set at port 1025 TCP - RTSP port at 1030, forward port 5002 UDP/TCP and the RTSP access code 12345
Cam 4 - 192.168.1.203 - set at port 1026 TCP - RTSP port at 1031, forward port 5003 UDP/TCP and the RTSP access code 12345
Cam 5 - 192.168.1.204 - set at port 1027 TCP - RTSP port at 1032, forward port 5004 UDP/TCP and the RTSP access code 12345
Cam 6 - 192.168.1.205 - set at port 1028 TCP - RTSP port at 1033, forward port 5005 UDP/TCP and the RTSP access code 12345
This worked for me using the above settings....take your time, plan out the ports, all RTSP ports must be different on each cam
Accessing CAMS can be done via your cell phone below:
Camera 1---> RTSP://<your TZO camera domain>:554/12345
Camera 2---> RTSP://<your TZO camera domain>:1029/12345
Camera 3---> RTSP://<your TZO camera domain>:1030/12345
Camera 4---> RTSP://<your TZO camera domain>:1031/12345
Camera 5---> RTSP://<your TZO camera domain>:1032/12345
Camera 6---> RTSP://<your TZO camera domain>:1033/12345
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

IPhone use to connect to a Linksys WRT54G v5. router but now it won't go to Internet. Updated firmware of Router.

Hello. We have 3 iPhones at my work and for a long time we could connect through WIFI with a wireless Linksys router. Now it won't get us to the Internet. I have updated the router's firmware. The iPhones can see the connection but the Internet won't work. I have played with some of the settings in the router but I don't think I know enough. Please help.

If you think it might need a charge, then use the Wall Charger to charge it up a bit.
Reset, hold at same time Home and Power buttons for about 15 seconds until iPhone restarts itself. See if everything is OK.
If not, you can try to Restore. If the iPhone is OFF, then hold the Home button as you connect the iPhone to computer with iTunes open. Keep holding Home button until iTunes detects iPhone in Recovery Mode. Restore Firmware.
If the iPhone is ON, then connect iPhone to computer with iTunes open, and hold both Home and Power buttons until iTunes detects iPhone in Recovery Mode. Restore Firmware.

Flex 4.5 problem using image in Mobile Application (Android)

I have a problem using flex and mobile application...
I have an image with path = "/mnt/sdcard/images/20120202172020990.jpg"
Simply using
<s:Image id="image" source="/mnt/sdcard/images/20120202172020990.jpg" />
Get me an empty image on device, still using it on computer (desktop build / debug) it works fine...
I have enabled every kind of permission in the app.xml
Why I got this error?

I actually solved the problem using:
image.source = File.desktopDirectory.resolvePath(file_name).url;
using instead this one it will work only under windows...
image.source = File.desktopDirectory.resolvePath(file_name).nativePath;
I don't know if it's a bug or whatelse, but I think that the source property of Image passing a filename that start with / (/ is root for unix based OS, android, linux, ios, etc), will take is as a relative path instead of complete path...

Built-in iSight problems-"camera in use by another application" but its NOT

I am having an issue with my iMac G5 2.1GHz with iSight built in.
I tried to iChat AV tonight after months of not using it. When I opened my own video window it says "Your camera is in use by another application."
There are no other applications open in the dock other than Finder.
Same results with Photobooth. The message reads -- Photo Booth cannot open because the camera is in use by another applicaton. Close the application using the camera, then try opening Photo Booth again. < OK >
I searched this forum and tried the following:
• zap PRAM
• reset SMU
• reset NVRAM
I looked for iSight prefs, but couldn't find anything. Deleting prefs is the only thing I have not tried, but I do not know what to delete.
Also, the camera shows up under USB under system profiler. The IR remote also shows up on the same bus, and the remote works just fine.
The green light next to the iSight is never on.
I switched to another user and experience the same problems, so it does not seem to be user settings.
Any help to get my computer to recognize my iSight would be appreciated!

Thanks for the note. I saw that Apple KB article #93216 that basically tells you not to have any other applications running that use the camera, which I do not. Also, I have Classic installed, but it is not running as I hardly ever use it.
Since my original post last night I have tried several more things, with absolutely zero success.
One unique thing that I thought would work (and it sort of did) was to add Photobooth to my Startup Items under the Accounts tab of System Preferences. Unlike iChat AV, Photobooth will not even open if the built-in iSight is not available. So, I thought, let's see if Photobooth will open at Startup and perhaps take over the camera before whatever is taking it over has a chance to do that.
Sure enough, this trick worked, although the video screen was blank. On a second time the video screen showed erratic thick lines like it was starting to pass the video data through and then was stopped. Again, my iSight is recognized by Apple System Profiler, so the computer knows it is there and is getting power, etc. As soon as I quit Photobooth and tried to reopen it, I received the message again that the camera was in use by another application.
My next steps, when I am able, are to try to boot off an external firewire hard drive that should have an older saved backup of my system, from when the camera was working. I will also download the combo updater as you suggest, MGW, and apply that as I understand that to be a sort of remedy for any number of problems.
To me it appears to be a software issue. I would imagine with the OS and not related to any application in particular. (iPhoto cannot access the iSight, can it? For some reason my iPhoto opens automatically on my G5 iMac every time I boot it up, and I cannot figure out why. I will look into this issue and see if it is related.)

Lynksis wrt54gs problems

My lynksis wrt54gs version 6 is having a problem.
The L.E.D indicator light will not go on and the power button flashes a lot.
The router was working before but my sister unplugged it so I dont know what the prooblem is.
I figured I needed to upgrade the firmware but there is no firmware upgrade utility for my router and there is only the firmware.
I know this has probabaly been asked a lot of times but I would really appreciate some help and assistance.
Thank you for your time.

1)connect the computer to the modem and download the firmware from www.linksys.com/download
2) reset the router for 30 seconds and do a power cycle
3)if the power light is steady , connect the computer to router's port 1 ....access the router using http://192.168.1.1 .. the default password is admin
4)click on the "Administration" tab , go to "firmware upgrade" .. select the firmware file and click upgrade ..

Problem Using WRT54G As Router/Gateway

Have a home network with following configuration:
Windows 2000 domain with one box acting as the domain server, the DNS server, and the DHCP server.
4 PCs with wired connections to an 8 port hub. All of the wired PCs point to the domain server for DNS/DHCP.
A DSL modem routed through a sonicwall firewall to the 8 port hub (I don't knw if I'm saying this right, but all wired PC's are routed to the firewall then out to the internet, while all incoming traffic is routed through the firewall before reaching the LAN).
This wired network has worked fine, but we also have a number of laptops with wireless adapters, so we purchased a WRT54G to work with these laptops.
My idea was to just have the WRT54G attached to one of the ports on the hub (with no direct connection to a computer) and have all of our laptops connect to the WRT54G wirelessly, then be routed back and forth using the WRT54G.
Was finally able to set up the WRT54G with only one connection (via one of the 4 ports on the back of the WRT54G) to the (wired) 8 port hub. Our laptops generally can see the WRT54G, but routing is intermittant at best. I disabled DHCP on the WRT54G...this seemed to help, but not for long. I also established a reserved IP for the WRT54G on the DHCP server, but the intermittant problem still keeps happening (seems to route on the laptops for a while, then it just stops). In Basic Setup, I set the Internat Connection Typt to "Automatic Configuration - DHCP". IN Advanced Routing, I set the operating mode to "Router" (vs. Gateway).
Can anyone tell from this description where I'm going wrong? I can get the laptops to see the wireless and route for a short time, but it never seems to keep working (also note that on a couple of the laptops, the network icon states that the laptop was not able to connect to the wireless network...but it's able to route using IE????).
Thanks for any help!
Dan

Thanks Helm.
I had done what you suggested (which is consistent with directions I found last night at directions I've found at http://routersetup.blogspot.com/2007/08/connecting-two-routers-wired.html), but I'm still having some intermittant problems. My Vista laptop doesn't seem to be having any problems at all, while one of the two XP boxes will connect for (only) a couple minutes after rebooting, and the other XP machine will not connect at all (although it seems to find the wrt54g...it just ends up saying it's having a dns problem).
With this in mind, I think my problem is not necessarily related to the wrt54g now (although we do have cordless phones, but they are 5.4 ghz)....will keep playing with this...is there any limit to the number of laptops that can be connected this way?
Message Edited by DanJ on 12-24-2007 03:31 PM

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

How do I restore my iPhoto. When I open i get a window dialog "Your iphoto library is either in use by another application or has become unreadable shut down and restart your computer. If problem persists, try rebuilding your iphoto library. To do th

When I try to open iPhoto I get a window dialog that says...
Your photo library is either in use by another application or has become unreadable
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have tried the reopen it while keeping the Option and Command keyes pressed.
No change.
I dee nothing but a blank page,
Any help would be appreciated.
Also hace back ups of all images on cd's. dvds and jump drives.
Any advice is appreciated.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I downloaded a application to my iphone5, however when i open the application i receive a message stating that my device clock apperars to be incorrect as a result you may experience problems using this application. How do i fix this issue?

Im trying to watch a show but because of this message its not allowing me to do so. Again the error message im receiving is " Your device's clock appears to be incorrect as a result you ,ay experince problems using this application" how do i resolve this issue?

If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox application and save the disk image file to the desktop
*Firefox 26.0: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re-)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Problem in configuring SSO using SAML for applications hosted on diff m/c

Hi Techies,
I am stuck in a weird problem for past month or so without any resolution. Not much help by googling. So I hope i get the answer from the mouth of the horses -
I am trying to use SSO using the sample application appA and appB as stated in the tutorial of SSO by BEA.
I am summarizing the problem below -
Steps followed for Configuring SSO using SAML
1. Created 2 domains on 2 seperate machines namely domainA and domainB
2. Source appliction is deployed on domainA and the target application is deployed on domaninB
The steps mentioned in the following tutorial has been followed-
http://dev2dev.bea.com/pub/a/2006/12/sso-with-saml.html
3. As mentioned in the tutorial the certificate is generated using keytool utility. The same certificate is copied
to WEBLOGIC_HOME/server/lib of destination machine.
4. The certificate was successfully registered on desitnation or host 2 but while activating the configuration
changes(SSL client Ientity Alias and SSL Client Identity Pass Phrase) for Federation services the following error
is thrown -
" SAMLBeanUpdateListener: SAMLKeyManager.prepareUpdate() failed with exception:
weblogic.descriptor.BeanUpdateRejectedException: SAML key Manage failed to validate key (SSL Client) configuration
in the FederationServicesMBean, key alias: testalias "
The interesting bit of the problem is that the same configuration works on 2 domains created on same machine. The
problem only occurs when domains are created on seperate machines.
Alterative to the problem: when the certificate is generated seperately for domainB and copied to
WEBLOGIC_HOME/server/lib, it works. However, the certificate generated in domainA should have been copied.
Note: I am using Weblogic portal 9.2.1
Any quick replies will be much appreciated. Thanks.
Edited by saurabh.agrawal at 02/06/2008 2:01 PM

Hi François,
You are right about the use of the NameID format. But the issue here is/was that OIF at SP is integrated with OAM, and the authenticated user at OIF-SP and OAM will be the Anonymous user rather than the user who was identified at the IdP even though the remaining attributes sent are for the IdP user. I think these attributes can be used by with OAM for authorization using custom authorization plug-ins but haven't tried that one out.
As for the attribute sharing profile, it's this one - http://www.oasis-open.org/committees/download.php/18058/sstc-saml-x509-authn-attrib-profile-cd-02.pdf, although for the life of me, I cannot remember why I suggested this in the first place!
-Vinod

Photo Booth Problems -- being used by another applications/ Please help!

Hi everyone: I am having problems with my 17" iMac (C2D). Photo Booth worked great for the first few weeks. Now when I go to use it -- I get a message that says it is in use by another application or there is no camera attached. Well of course there is a camera attached and there is no other application running. I've tried shutting down and bring the computer back up, as suggested in other posts. That did not work.
Any other suggestions please. I'd really like to get this going again.
Sincerely,
Anne

Hello apple-chick
Check to make sure that iSight was not left on in another app, it can only be used by one app at a time!
1. See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications.
2. See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC
Reset your computer's SMC and then check System Profiler again.
http://docs.info.apple.com/article.html?artnum=303446
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.9) Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

Problem using relative sizes on a HTMLtext

Hi
I have a problem using relative sizes on a HTMLtext on Flash
ActionsScript
2.0
Something like:
htmltext= '<font size="+5">TITLE</font>Text
Praragraph...'
(+5 in normal HTML means is 5 points bigger than the standard
text.)
I create the the textArea i set the size and everything if I
do it by
actionscript everything works fine except when i setup the
htmltext, the
text disspears so I need to re-set the embeded font with:
myTextFormat.font = Varfont;
textBox.embedFonts = true;
textBox.setTextFormat(myTextFormat);
But using this lines I lose the previous size. that i
assigned before when i
created the textarea. And goes to a standard size... dont
know why, i am
using a different TextFormat.....
And If i want to use the size i was using , all the text
becomes the same
size (but is the size that I want)...
If I create the text area manually using the gui, it works
well.
¬_¬
>-------------------------------------------------------------------------------------<
The main problem is... why the the text dissapears when i set
a new html
text???
>-------------------------------------------------------------------------------------<
Thanks.

1. Really there are a few functions that i skiped yesterday:
3. The font is linked and embeded in library.
public function setHTMLText(texto:String):Void {
textBox.html = true;
textBox.htmlText = texto;
public function setEmbedFont(__font) {
_font = __font;
_embed = true;
setTextStyle(__font);
public function setTextStyle(__font:String, __bold:Boolean,
__underline:Boolean, __italic:Boolean) {
var myTextFormat:TextFormat = new TextFormat();
myTextFormat.font = _font;
textBox.setTextFormat(myTextFormat);
public function setTextSize(__size:Number) {
var myTextSize:TextFormat = new TextFormat();
myTextSize.size = _size;
textBox.setTextFormat(myTextSize);
Kind of constructor:
autotext_txt.setTextSize(20);
//1 if I activate this one the text will dissapear after
asigning a new
text. And I will need to apply the embed font again.
autotext_txt.setEmbedFont("Arial2");
autotext_txt.setHTMLText(This is a text (big text) | <font
size="-5"
color="#dddddd"> Small Text</font>');
autotext_txt.setEmbedFont("Arial2");
Why dont u have a try?
Thanks,
J
"kglad" <[email protected]> escribió en
el mensaje
news:elo6bk$pu3$[email protected]..
> 1. where's Varfont defined?
> 2. htmtext should be htmlText.
> 3. have you defined a linkage id for a library font?

Problem using a JTabbedPane in my application

Hello, everybody.
I am developping a application using the GUI editor NetBeans IDE 3.6 and I have some questions-problems.
I encounter some problems with my JTabbedpane used in my application. I use a JTabbedPane with seven JPanel. On the first JPanel, I have some different components (JLabel, JComboBox, JTextField, JButton, List, ...) and it does not create any problem when I start my apllication.
On the second JPanel of the JTabbedPane used, I separeted it with some other JPanel to differenciate the types of data's displayed in that tab and I also have a lot of different components on it ((JLabel, JComboBox, JTextField, JButton, List, ...).
My first problem is that, when I start my application, the List component on the second Jpanel of my JTabbedPane appears above all the other tabs of my JTabbedPane until I click on the tab that contains that List. Once I have clicked on the second JPanel (that contains the List that makes me some problems), everythings becomes OK and it does not appear anymore above the other tabs (JPanel) of my JTabbedPane. I thing that it is a question a properties wrongly set, but I don't know the one I have to correct to eliminate that probem.
The second problem is how to go from one JPanel (tab) to another JPanel (tab)with programming ??? For example, I would like to go to the second JPanel (tab) while double-clicking on a record present in a List in the first JPanel(tab). How can I do that ???
A great thank you in advance for your help.
Christian.

For the seconds question, use the method setSelectedIndex() or setSelectedComponent(), whichever is more appropriate.
The first problem I have also seen sometimes with tabbed panes. Can't remember how I corrected it though. Guess you could make sure the panels backgrounds are set to be opaque.

Camera being used by another application problem

Hi there
Please help, Ive been using ichat with my Panasonic NV-GS17 digital camcorder on Panther for ages with no hassel at all, ichat just found the camera and away I went.
I recently upgraded to Tiger 10.4.6 now every time I log into ichat it says that the cameras in use by another application. Please help
I have read some other similar messages about this subject but have still had no joy. I do use Qtime pro 7.0.4 but was using this before I upgraded my system.
Its driving me mad! any ideas?

Hi Dano71,
Welcome To The Apple Discussion Pages.
Was the camera plugged in when you did the update ?
If so unplug it for about 15 mins or so.
Do you have any Quicktimew Plug-ins you have added under Panther ?
Have you looked at this FAQ http://discussions.apple.com/thread.jspa?threadID=278760 about possible Panther to Tiger iChat problems ?
8:29 PM Wednesday; June 7, 2006

Problem using game-related applications behind lynksis wrt54g v8 router.

Similar Messages

Maybe you are looking for