Problem using HP Connect with my HP Photosmart C410

I am trying to use HP Connect apps with my HP Photosmart C410 printer. I can add the device, but none of the apps seem to work with my printer It'a not THAT old. Any suggestions?
This question was solved.
View Solution.

HI beachgrl,
Welcome back to the HP Support forums. I understand that you would like to learn what printables are available for your Photosmart C410 printer in HP Connected.
Once you are signed into your HP Connected account, if you type the link listed below into the address bar on your browser it should take you to a page that shows the printables you already have on your printer. Below the "Recommended Printables" section there is a search function. If you type in your printer model it will list the printables available for the Photosmart C410a. The results will be grouped by category. I have included a screen shot.
The address you need to type into your browser address bar is https://printables.hpconnected.com
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Problem in establishing connection with mysql 5.0

Hi,
I am using JCAPS 5.1. I tried to insert data to mysql database table.
But i got following error
java.sql.SQLException: Error in allocating a connection. Cause:
Physical Connection doesn't exist.
My intention is to read file in which data are comma seperated and to
populate those values to a mysql 5.0 database table.
Sample DATA in file [test.txt]
111,gg,23,MFG
112,hh,24,MFG
113,ii,25,RETAIL
114,jj,26,IT
Database table: employee
eno,ename,eage,edept
While creating JDBC OTD there is no problem in establishing connection with database. But after deploying i got above error.
I have used Mysql 5.0 Connector/J JDBC driver. Added JDBC driver jar files to following directories as required.
1) C:\JavaCAPS51\logicalhost\is\lib
2)C:\JavaCAPS51\logicalhost\is\domains\test\lib
Steps i have followed as per JDBC-ODBC -eway user guide doc.
1) Created USerDefined OTD and added necessary fields
2) Created JDBC OTD.
3) Created JAVA collaboration and do business process for inserting
4) Mapped all components by creating in Connectivity MAp
5) created necessary external systems in envrionment explorer.[JDBC External System and File External System]
6)Created Deployment profile
5) Deployed it.
After deploying it gives error as
java.sql.SQLException: Error in allocating a connection. Cause: Physical Connection doesn't exist
Please let me know the solution for problem.
Message was edited by:
VenkateshSampoornam

In the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb

Problem using CORBA clients with RMI/EJB servers..!!!???

Hi,
I have a question on using EJB / or RMI servers with CORBA clients using
RMI-IIOP transport, which in theory should work, but in practice has few
glitches.
Basically, I have implemented a very simple server, StockTreader, which
looks up for a symbol and returns a 'Stock' object. In the first example, I
simplified the 'Stock' object to be a mere java.lang.String, so that lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case 1) and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA and RMI-to-RMI.
But the problem arises when I tried using the RMI server (via IIOP) with the
CORBA client, when the client tries to narrow the object ref obtained from
the naming service into the CORBA idl defined type (StockTrader) it ends up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a PortableRemoteObject derived
class, to make it IIOP compliant), and then the server to register the stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming =NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ": " +obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to register the RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref name (with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the naming
service, the operation StockTraderHelper.narrow() fails in the segment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registered in a CORBA
server (as opposed to an RMI server), but works correctly with no casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hari

On the contrary... all that is being said is that we needed to provide clearer examples/documentation in the 5.1.0 release. There will be no difference between the product as found in the service pack and the product found in the 5.1.1. That is, the only substantive will be that 5.1.1 will also
include the examples.
"<=one way=>" wrote:
With reference to your and other messages, it appears that one should not
expect that WLS RMI-IIOP will work in a complex real-life system, at least
not now. In other words, support for real-life CORBA clients is not an
option in the current release of WLS.
TIA
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
We currently publish an IDL example, even though the IDL programmingmodel in Java is completely non-functional, in anticipation of the support
needs for uses who need to use IDL to talk to the Weblogic server,
generically. This example illustrates the simplest connectivity; it does not
address how
to integrate CORBA and EJB, a broad topic, fraught with peril, imo. I'llnote in passing that, to my knowledge, none of the other vendors attempt
this topic either, a point which is telling if all the less happy to hear.
For the record then, what is missing from our distribution wrt RMI-IIOPare a RMI-IIOP example, an EJB-IIOP example, an EJB-C++. In this you are
correct; better examples are forth coming.
Still, I would not call our RMI-IIOP implementation fragile. I would saythat customers have an understandably hard time accepting that the IDL
programming model is busted; busted in the sense that there are no C++
libraries to support the EJB model, and busted in the sense that there is
simply no
support in Java for an IDL interface to an EJB. Weblogic has nothing to doit being busted, although we are trying to help our customers deal with it
in productive ways.
For the moment, what there is is a RMI (over IIOP) programming model, aninherently Java to Java programming model, and true to that, we accept and
dispatch IIOP request into RMI server objects. The way I look at it is this:
it's just a protocol, like HTTP, or JRMP; it's not IDL and it has
practically nothing to do with CORBA.
ST wrote:
Eduardo,
Can you give us more details about the comment below:
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult ot
use an idl client in java to work.It seems to me that Weblogic's RMI-IIOP is a very fragile
implementation. We
don't need a "HelloWorld" example, we need a concrete serious example(fully
tested and seriously documented) that works so that we can get a betteridea
on how to integrate CORBA and EJB.
Thanks,
Said
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
Please post request to the news group...
As I said, you must separate the idl related classes (class files and
java
files) from the rmi classes... in the rmic step, you must set a newtarget
(as you did), emit the java files into that directory (it's not clearyou
did this), then remove all the rmi class files from the class path... ifyou
need to compile more classes at that point, copy the java files to theidl
directly is you must, but you can not share the types in any way.
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult otuse
an idl client in java to work.
Harindra Rajapakshe wrote:
Hi Eduardo,
Thanks for the help. That is the way I compiled my CORBA client, by
separating the IDL-generated stubs from the RMI ones, but still I
get a
CORBA.BAD_PARAM upon narrowing the client proxy to the interfacetype.
Here's what I did;
+ Define the RMI interfaces, in this case a StockTrader interface.
+ Implement RMI interface by extendingjavax.rmi.PortableRemoteObject
making
it IIOP compliant
+ Implemnnt an RMI server, and compile using JDK1.2.2
+ use the RMI implementation to generate CORBA idl, using RMI-IIOPplugin
utility rmic;
rmic -idl -noValueMethods -always -d idl stock.StockTraderImpl
+ generate Java mappings to the IDL generated above, using RMI-IIOPplugin
util,
idlj -v -fclient -emitAll -tf src stocks\StockTrader.idl
This creates source for the package stock and also
org.omg.CORBA.*
package, presumably IIOP type marshalling
+ compile all classes generated above using JDK1.2.2
+ Implement client (CORBA) using the classes generated above, NOTthe
RMI
proxies.
+ start RMI server, with stockTrader server obj
+ start tnameserv
+ start CORBA client
Then the client errors when trying to narrow the obj ref from the
naming
service, into the CORBA IDL defined interface using,
org.omg.CORBA.Object obj =naming.resolve(nn);
StockTrader trader =StockTraderHelper.narrow(obj); // THIS
ERRORS..!!!
throwing a CORBA.BAD_PARAM exception.
any ideas..?
Thanks in advance,
-hari
----- Original Message -----
From: Eduardo Ceballos <[email protected]>
Newsgroups: weblogic.developer.interest.rmi-iiop
To: Hari Rajapakshe <[email protected]>
Sent: Wednesday, July 26, 2000 4:38 AM
Subject: Re: problem using CORBA clients with RMI/EJBservers..!!!???
Please see the post on june 26, re Errors compiling... somewherein
there,
I suspect, you are referring to the rmi class file when you are
obliged
to
completely segregate these from the idl class files.
Hari Rajapakshe wrote:
Hi,
I have a question on using EJB / or RMI servers with CORBA
clients
using
RMI-IIOP transport, which in theory should work, but in practice
has
few
glitches.
Basically, I have implemented a very simple server,
StockTreader,
which
looks up for a symbol and returns a 'Stock' object. In the firstexample, I
simplified the 'Stock' object to be a mere java.lang.String, so
that
lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case
1)
and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA andRMI-to-RMI.
But the problem arises when I tried using the RMI server (via
IIOP)
with
the
CORBA client, when the client tries to narrow the object ref
obtained
from
the naming service into the CORBA idl defined type (StockTrader)
it
ends
up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending
java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a
PortableRemoteObject
derived
class, to make it IIOP compliant), and then the server to
register
the
stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation
class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming=NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ":"
+obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to
register
the
RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref
name
(with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the
naming
service, the operation StockTraderHelper.narrow() fails in thesegment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the
type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registeredin a
CORBA
server (as opposed to an RMI server), but works correctly with
no
casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hari

HT4623 My iPod Touch is te 4th generation with iOS 4 only... The desktop that it used to connect with was broken and I couldn't update my iPod touch as all content is linked to the iTunes on that broken PC. What should I do?I won't erase all my music reco

My iPod Touch is te 4th generation with iOS 4 only... The desktop that it used to connect with was broken and I couldn't update my iPod touch as all content is linked to the iTunes on that broken PC. What should I do?I don't want to erase all my music recording. (couldn't back up easily...) my dairy, my financial record made on apps...
If I got a new Mac book pro soon, would it helps backuping everything?

awesome121, he does not an an iCloud account. You need iOS 5 or later for iCloud and the poster said he has iOS 4.
awesome121 wrote:
DO you have a icloud account?

Problem using SQL Loader with ODI

Hi,
I am having problems using SQL Loader with ODI. I am trying to fill an oracle table with data from a txt file. At first I had used "File to SQL" LKM, but due to the size of the source txt file (700MB), I decided to use "File to Oracle (SQLLDR)" LKM.
The error that appears in myFile.txt.log is: "SQL*Loader-101: Invalid argument for username/password"
I think that the problem could be in the definition of the data server (Physical architecutre in topology), because I have left blank Host, user and password.
Is this the problem? What host and user should I use? With "File to SQL" works fine living this blank, but takes to much time.
Thanks in advance

I tried to use your code, but I couldn´t make it work (I don´t know Jython). I think the problem could be with the use of quotes
Here is what I wrote:
import os
retVal = os.system(r'sqlldr control=E:\Public\TXTODI\PROFITA2/Profita2Final.txt.ctl log=E:\Public\TXTODI\PROFITA2/Profita2Final.txt.log userid=MYUSER/myPassword @ mySID')
if retVal == 1 or retVal > 2:
raise 'SQLLDR failed. Please check the for details '
And the error message is:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 5, in ?
SQLLDR failed. Please check the for details
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

TS1398 I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else. No problems at home connect with other iPads and MACs.

I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else? No problems at home connect with other iPads and MACs.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Receiving emails about a newly set up itunes account that does not belong to me (although has my name). The address used in connection with it seems to be in California and the person likes Justin Bieber - what's going on here?

Hi. I am receiving emails about a newly set up itunes account that does not belong to me (although has my name). The address used in connection with it seems to be in California and the person likes Justin Bieber (as I now have a receipt for that purchase). It states that it is billed to store credit. (a) I don't want to receive this person's information and (b) I certainly don't want to somehow be charged for it (although it appears, thus far, that I have not been). What's going on?

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

Problem using iPad mirroring with an Apple TV and 4:3 Projector

I'm a teacher and I've been using my iPad 2 in the classroom for about a year and a half. I would use Apple's VGA Adapter to connect to my projector, which worked fine. I just didn't like being tied down, and the dock connector would come loose very easily and lose connection to the projector, which interrupted the flow of the lesson.
So this summer, I got an Apple TV and a projector with an HDMI port so I could start using Airplay Mirroring to get the iPad screen onto the projector. But I'm having trouble with the aspect ratio. Forgive my drawing, but the genius at the Apple store had a hard time understanding my explanation, so I'm hoping this will help show what I mean.
My projector (ViewSonic DLP PJD5133) can be set to either a 4:3 or 16:9 aspect ratio (4:3, 800x600 is the native resolution). My projector screen in the front of the classroom is 4:3, so when the projector is set to 4:3, the image fills up the screen (which is what I want - it needs to be as big as possible so the entire class can see it clearly; plus it means all the output pixels are being used). When the projector is set to 16:9, the image is letterboxed (not ideal unless I'm showing a widescreen video or image).
The Apple TV's native aspect ratio is widescreen, and the iPad's native aspect ratio is 4:3, so if you use Airplay mirroring on a widescreen TV, the Apple TV will pillarbox the image (add horizontal black bars on each side), so that the image will not be stretched/distorted. (I know that it will show widescreen videos and a few widescreen-ready apps without the pillarbox, but the apps I use in class - Keynote, Noteshelf, etc. - don't fall in that category). The effect on my projector screen is a tiny 4:3 image taking up half the area it would have taken if I had used the VGA connection.
So in the Apple TV, I went to Settings>Audio & Video>TV resolution, and chose 800x600 60Hz (the max 4:3 resolution for my projector). Since the Apple TV is natively widescreen, it seems to accomplish this change be stretching the image vertically; but it basically works because the Apple TV home screen fills up the projector screen. However, when I turn on Airplay Mirroring on my iPad, the image does not fill up the screen. The Apple TV still puts a pillarbox on the image, so I end up with a distorted, square image of my iPad screen. It's the right height - the max 600 pixels for my projector - but it's not as wide as it should/could be.
Is there a setting that I'm missing? I understand that the Apple TV has to stretch its home screen image to accommodate the 4:3 resolution, but I think it should be smart enough to realize that if it's receiving a 4:3 image from the iPad and sending it out to a 4:3 TV, it doesn't need to pillarbox the image.
Before you answer - this is not a problem with the projector settings, and my Apple TV is not defective. You could simulate what's happening on your Apple TV, even if it's hooked up to a widescreen TV. In the Apple TV settings, change the TV Resolution to 800x600 as mentioned above (or any other of the 4:3 options). Now go to the Apple TV home screen, and note the amount of space the image is taking up on your screen (on a widescreen TV, it will be pillarboxed, and it will look like it's been squished horizontally). Then turn on Airplay mirroring on the iPad, and you'll see that the iPad image does not have the same width as the Apple TV home screen and it looks square/squished.
Also, while my projector does have a zoom function, it will not magnify the small iPad mirror image correctly (if I were to leave the Apple TV and projector on a 16:9 setting). It cuts off the top and sides. But even if it didn't crop the image, it's a digital zoom, so that option still won't fix the fact that I'm not getting a full 800x600 image on the projector. The same problem would apply if I were to move the projector farther away from the screen (so that the widescreen image takes up the full height of the projector screen, while spilling off the sides). I'll still have a lower resolution image, which isn't ideal since I'm often showing text on the screen through Keynote. Also, widescreen videos wouldn't fit on the screen, and I can't move the projector easily because it's fixed to the ceiling.
Sorry for the long explanation. Any ideas? I'd really appreciate some insight.

We have the same problem, and not only with ipads. Macbook Air is doing something similar. it can only use airplay with 1080 and 720 resolution, so the image is squeezed on a 4:3 projector. We use AppleTV 3 and Mountain Lion OS. We use ATVPRO from Kanex.
Apple must get its act together and fix this, they promise gold and green forests, but nothing works.
DO SOMETHING!

With Lion no connection with my HP Photosmart

Hello everybody,
I got Lion and now I am not able to connect the MacBook Pro with my HP Photosmart Premium Fax All-in-one C410b printer anymore!
I am really disappointed! I connected them also with USB. Nothing! The software had recognized the printer and automatically downlawded the driver.
Neverthless no printing, no utilities readability, nothing!
I checked the compatibility but the HP and Apple sites are not in accordance!
Is anyone able to help me? Thank you in advance.
Sorry for my English, I am still improving it!

According to http://support.apple.com/kb/HT3669, your printer is supported. Try deleting the /Library/Printers/hp folder and the printer from Print & Scan. Then download the drivers using Software Update or from here:
http://support.apple.com/kb/DL907
Hope this helps.

Problem using JDBC connection

I'am using 9iAS R2 and I have a entity bean using a DataSource with out any problem, but I also have a client program using the same datasource. I can lookup the datasource without any problems, I get a connection, but when I try to createStatement() on the connection I get an Exception see below.
I hope some one can help me!
Regards
Morten
java.lang.NullPointerException
     at com.evermind.sql.OrionPooledDataSource.addUsedConnection(OrionPooledDataSource.java:539)
     at com.evermind.sql.OrionPooledDataSource.getPooledInstance(OrionPooledDataSource.java:290)
     at com.evermind.sql.OrionCMTConnection.setConnection(OrionCMTConnection.java:189)
     at com.evermind.sql.OrionCMTConnection.intercept(OrionCMTConnection.java:127)
     at com.evermind.sql.FilterConnection.getMetaData(FilterConnection.java:75)
     at com.evermind.sql.FilterConnection.getMetaData(FilterConnection.java:76)
     at dk.modulus.regelmaskine.RegelParamDAO.getRegelParametre(RegelParamDAO.java:33)

Hi Morten,
Have you tried running OC4J in "debug" mode? This web page has more details:
http://kb.atlassian.com/content/atlassian/howto/orionproperties.jsp
You may also like to try "P6Spy"
http://www.theserverside.com/home/thread.jsp?thread_id=8337
And here is a web page from Oracle's "Technet" site regarding debugging
OC4J:
http://otn.oracle.com/tech/java/oc4j/htdocs/oc4j-logging-debugging-technote.html
Hope this helps you.
Good Luck,
Avi.

Problems using FW-7344 with Fire Wire Video Cameras

Is it a bad idea to use the FW-7344 with other devices on the same fire wire bus?
We are trying to use an FW-7344 with a fire wire video camera but we tend to get packet errors that force a reset of the controller. We suspect that the problem is related with the camera and controller being on the same fire wire bus.
We instantly see problems when we connect two FW7344s and one video camera on the same fire wire card.

The NIMax program reads Packet Error. I can't recall the first error that our program reads, but I think it typically says something about not being able to communicate return values from the controller to the host computer.
This makes me think that the NI driver on the host does not retry after failing to get return data from the controller. This assumption may be valid with the PCI version, but probably is not with the FireWire version.
It only takes one camera for this problem to happen, but the problem is intermittent.

Unable to use Internet Connect with my new wireless device

I just received a new wireless device for my macbook pro. Normally I sign on with Internet Connect, but after setting up the new card, I can only connect using Verizon Manager, which usually doesn't give me good connection, I don't know why.
I called the Verizon people, they mostly are clueless as to how I was able to sign on using both Internet Connect and Verizon Manager before with my old card. I remember there's a way of setting up manually if you want to use Internet Connect. Problem is, when I went to Systems Preferences and clicked on Network, a pop up prompt saying "your network setting have been changed by another application" keeps popping up even as I keep closing it. ***?!!! How can I get rid of it so I can change network setting manually?
I just want the option of connecting with Internet Connect with my new wireless device. BTW, when I try connecting with it using my old setting National access/ Broadband access , I get a message saying "the selected communication device does not exist".

"I just received a new wireless device"
If not from Verizon, then who? Did it come w/a manual? If not, have you contacted the vendor/manufacturer for instructions?
==========
"A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting"
!http://i50.tinypic.com/izvwo1.gif!

Using gigabit connections with 350N

I have been experiencing some problems with my 350N recently. I've upgraded to the latest version when it was released(1.03.2) and it's been ok.
Recently I've had a problem getting onto the internet. I've isolated the problem to be the router when I bypassed router to the PC directly. I can get IP address but I cannot get onto the internet. The wireless clients show the same problem.
Only thing that has changed is this. I've put one PC on the network at gig speeds. Are there a certain port(s) that I can use? It works with the gig for a while and then stops. I suspect this is the problem but I haven't done extensive troubleshooting. It's very frustrating!!!
Any pointers would be appreciated!!!

i have same problem as steinhouse10874. after I download lastest ver firmware and installed it. My pc cannot obtain ip from router and occur limitation connective. I havn't using wireless connect to router so limitation connective occur is let me feel strange. I reset router, then I can obtain ip form reuter and can connet to internet. But some strange things occur, I just open port 80 from router, but I discover FTP port 21 have been opened too. I check router setting , I havn't open FTP port 21. FTP server just for my VPN only, but now it stand at internet too. after it , i check other port pop3 or smtp3 for SSL , it is automatic opened to. I havn't opened it both in router. I have 3 pcs at my home , now every pcs like DMZ standing in internet. pls let me know anyone have those case, and have any slove solution. linksys it the biggest and famous in the world, pls check it and solve as soon as possible , thanks much!

Can we use JCo connection with non-Web Dynpro J2EE project in NW

With Web Dynpro, we have the RFC wizard to call RFCs using JCo connection. I am wondering, if I create a J2EE project in NW development studio, can I and how to use JCo connection to call RFCs?
Thanks.

yes, of course.
Add jar sapjco.jar then
import com.sap.mw.jco.*;
public class Bapi1 extends Object {
   JCO.Client mConnection;
   JCO.Repository mRepository;
   public Bapi1() {
      try {
         // Change the logon information to your own system/user
         mConnection =
            JCO.createClient("001", // SAP client
              "<userid>", // userid
              "****", // password
              null, // language
              "<hostname>", // application server host name
              "00"); // system number
        mConnection.connect();
        mRepository = new JCO.Repository("SAPJCo", mConnection);
      catch (Exception ex) {
        ex.printStackTrace();
        System.exit(1);
      JCO.Function function = null;
      JCO.Table codes = null;
      try {
         function = this.createFunction("BAPI_COMPANYCODE_GETLIST");
         if (function == null) {
           System.out.println("BAPI_COMPANYCODE_GETLIST" +
                              " not found in SAP.");
           System.exit(1);
         mConnection.execute(function);
         JCO.Structure returnStructure =
           function.getExportParameterList().getStructure("RETURN");
         if (! (returnStructure.getString("TYPE").equals("") ||
                returnStructure.getString("TYPE").equals("S")) ) {
           System.out.println(returnStructure.getString("MESSAGE"));
           System.exit(1);
         codes =
           function.getTableParameterList().getTable("COMPANYCODE_LIST");
         for (int i = 0; i < codes.getNumRows(); i++) {
           codes.setRow(i);
           System.out.println(codes.getString("COMP_CODE") + '\t' +
                              codes.getString("COMP_NAME"));
      catch (Exception ex) {
        ex.printStackTrace();
        System.exit(1);
      try {
        codes.firstRow();
        for (int i = 0; i < codes.getNumRows(); i++, codes.nextRow()) {
          function = this.createFunction("BAPI_COMPANYCODE_GETDETAIL");
          if (function == null) {
            System.out.println("BAPI_COMPANYCODE_GETDETAIL" +
                               " not found in SAP.");
            System.exit(1);
     function.getImportParameterList().
       setValue(codes.getString("COMP_CODE"), "COMPANYCODEID");
     function.getExportParameterList().
       setActive(false, "COMPANYCODE_ADDRESS");
     mConnection.execute(function);
     JCO.Structure returnStructure =
       function.getExportParameterList().getStructure("RETURN");
     if (! (returnStructure.getString("TYPE").equals("") ||
            returnStructure.getString("TYPE").equals("S") ||
            returnStructure.getString("TYPE").equals("W")) ) {
        System.out.println(returnStructure.getString("MESSAGE"));
     JCO.Structure detail =
       function.getExportParameterList().
       getStructure("COMPANYCODE_DETAIL");
     System.out.println(detail.getString("COMP_CODE") + '\t' +
                        detail.getString("COUNTRY") + '\t' +
                        detail.getString("CITY"));
catch (Exception ex) {
    ex.printStackTrace();
    System.exit(1);
mConnection.disconnect();
public JCO.Function createFunction(String name) throws Exception {
   try {
     IFunctionTemplate ft =
        mRepository.getFunctionTemplate(name.toUpperCase());
     if (ft == null)
       return null;
     return ft.getFunction();
   catch (Exception ex) {
     throw new Exception("Problem retrieving JCO.Function object.");
public static void main (String args[]) {
   Bapi1 app = new Bapi1();
Link: [http://help.sap.com/saphelp_nw04/helpdata/en/35/42e13d82fcfb34e10000000a114084/frameset.htm]

Problems using TFS 2008 with RoboHelp 11?

Adobe has not been able to resolve our company's connection problem with SharePoint thus far.
We do know that we can use TFS 2008 with RoboHelp because they have done that in the past. We are on RH11.
We need to know...Has anyone experienced any problems with using TFS 2008 with RH11? If so, what kind of problem(s)?

I've used TFS 2008/2010/2012 with RoboHelp without problems so far. You will always get the check in dialog, but that is the way it works, not a problem. This will become annoying when you are relocating lots of topics, since you will have to check in files a lot during these operations. But otherwise it works perfect in my experience.
As long as you make sure you have the 32 bit MSSCCI provider for the correct TFS version (MSSCCI 2008 for TFS 2008), you should be fine.

Problem using HP Connect with my HP Photosmart C410

Similar Messages

Maybe you are looking for